Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Wiring Harness Manufacturing and Assembly

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the manufacture and assembly of 2,060 military-specification electrical wiring harnesses identified by NSN 6150-01-248-2549, requiring full traceability throughout production and compliance with strict packaging standards. All units must be delivered to locations within the continental United States as directed by order, ensuring timely and precise fulfillment of military logistics needs. The work is classified as a subcontract under NAICS code 334419, with the Defense Logistics Agency acting on behalf of the Department of Defense to oversee procurement. The solicitation was posted on July 20, 2026, and performance will be coordinated through the established DLA contracting framework using the referenced award number SPE4A626D5714.

General Info

Manufacture 2,060 military wiring harnesses with traceability, deliver to U.S. locations, DLA oversees subcontract.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

334419 - Other Electronic Component Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-R-X921.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WIRING HARNESS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and assembly of 2,060 units of military-spec electrical wiring harnesses (NSN: 6150-01-248-2549) with full traceability, compliance packaging, and delivery to CONUS locations per order.

Similar Contracts

Same NAICS industry code

NSN 6150-21-920-2797 - CABLE ASSEMBLY, SPECIAL ELECTRI

Solicitation # SPE4A6-27-R-0079

This indefinite quantity contract, issued by DLA Aviation, is for the procurement of 28 special purpose electrical cable assemblies used in Aircraft Launch and Recovery Equipment. The requirement specifies Idal Technologies Inc. as an approved source for part number 6537C026-2. The contract features a five-year base period without additional options, with pricing evaluated based on an estimated annual demand of 28 units. Delivery is set as FOB Origin with a required delivery schedule of 422 days after receipt of order to various facilities within the Continental United States. While the total value is not expected to exceed the TINA threshold, offerors should be prepared to provide certified cost and pricing data. Electronic offers are not acceptable, and completed solicitation packages must be submitted. The solicitation is expected to be issued around November 13, 2026, with a response deadline of December 14, 2026.

POSTED

about 2 hours ago

DEADLINE

in about 2 months

ADAPTER,DRIVE MOTOR

Solicitation # SPRMM126QHB66

The contract pertains to the manufacture and delivery of the ADAPTER, DRIVE MOTOR, a critical component for the AEGIS WEAPONS SYSTEM, under solicitation SPRMM126QHB66. The item must strictly conform to drawing 5366057 and be identified by cage code 53711, with all parts requiring physical marking per MIL-STD-130 Revision N. The contractor is responsible for developing or acquiring the Stable Base Master Phototools since the government will not provide them, and all manufacturing must comply with MIL-I-45208 or ISO 9001/ISO 9002 quality systems. Inspection is required to be 100% performed per the manufacturer’s procedures, and records must be maintained for 365 days after final delivery. Substitutions or design changes are prohibited unless formally approved via a written change order, with specific code designations required to classify the nature of any proposed modification. The item must be delivered to W25G1U with an increased quantity of 14 units, and the offer due date has been extended to 29 MAY 2026, with a final response deadline of 8 AUGUST 2026. All contractual obligations are governed by federal and defense-specific clauses including Buy American Act requirements, small business subcontracting obligations, security prohibitions, and affirmative action provisions addressing DEI discrimination. The contractor must be an authorized distributor of the original manufacturer and submit proof of authorization with their offer. Packaging must adhere to MIL-STD-2073, and all technical data is subject to strict distribution restrictions as defined by seven official codes, with NOFORN and Official Use Only materials requiring separate government certification. Orders and modifications will be issued electronically through the PIEE-WAWF system, requiring electronic submission of receiving reports and invoices. Contractors must register for the Electronic Document Access tool and provide a contact email for communication. Non-compliance with specifications, failure to disclose deviations, or submitting unapproved substitutions will result in cost deductions or rejection of the proposal. All deliveries are subject to inspection at origin, with the designated point of contact for inspection inquiries being Brian Stevens at DLA.MIL.

SPRMM1 DLA Mechanicsburg

POSTED

about 2 hours ago

DEADLINE

in about 1 month

REMOTE LAUNCH E PNL

Solicitation # SPRMM126QHD00

This firm-fixed-price solicitation, issued by DLA Weapons Support Mechanicsburg, is for the manufacture and procurement of non-commercial items, specifically the Remote Launch E PNL and Module Assembly, RIM. The acquisition is being conducted under SEPA-EAF authority, leveraging FAR 12.001(b) procedures. Key requirements include strict adherence to MIL-STD-130 for physical identification and MIL-STD-2073 for packaging. Due to the nature of the items, the contractor must possess a government security clearance and authorized access to Secret-level classified documents in accordance with DD Form 254. Additionally, the Module Assembly, RIM requires compliance with ANSI/ESD S20.20 for electrostatic discharge control. The government will evaluate offers based on the Lowest Price Technically Acceptable criteria, with past performance weighted as more important than price. Offerors who are not the original equipment manufacturer must provide the OEM CAGE code and part number, and authorized distributors must submit proof of status on company letterhead. All invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Recent amendments have extended the response deadline to October 29, 2026, and increased the quantity for CLIN 0002 from 43 to 53 units. Inspection and acceptance for these supplies will occur at the origin.

SPRMM1 DLA Mechanicsburg

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Manufacture of Electronic Component (NIIN 016746980)

SPRMM1 DLA Mechanicsburg

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Supply of Band Pass Filters (NSN 5915-01-425-8386)

Pa DLA Aviation At Philadelphia

POSTED

about 10 hours ago

DEADLINE

FILTER,BAND PASS — 5915014258386 — SPRPA127QYA04

Solicitation # SPRPA127QYA04

Solicitation SPRPA127QYA04 is a request for quotations issued by DLA Aviation at Philadelphia for the procurement of 12 new spares of Band Pass Filters, identified by NSN 5915-01-425-8386. The items are to be delivered FOB Destination to NSWC Crane, Indiana, with a required delivery timeframe of 90 days. Inspection and acceptance will occur at the origin. The procurement is not a small business set-aside, and distributors must provide an unredacted OEM Distributor Letter at the time of proposal submission to be considered responsive. The award process prioritizes past performance over price, utilizing the DoD Supplier Performance Risk System (SPRS) to assess supplier, item, and price risks. Contractors must adhere to strict packaging and marking standards, including MIL-STD-2073-1 for preservation and MIL-STD-129 for labeling, with specific requirements for Depot Level Repairable labels where applicable. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American program, cybersecurity reporting under DFARS 252.204-7012, and the safeguarding of covered defense information.

Pa DLA Aviation At Philadelphia

POSTED

about 10 hours ago

DEADLINE

Protective Control Box Manufacturing (NSN 2920-00-472-1642)This subcontract involves the fabrication and assembly of 28 Protective Control Boxes (NSN 2920-00-472-1642) for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Opns Engines. The scope of work includes the construction of protective housings and the integration of 24V systems featuring reverse polarity protection. All units must undergo First Article Testing in accordance with QAP 11664348, and the manufacturer is required to maintain calibration standards per ANSI/NCSL Z540-1-1994. The project is based in New Cumberland and mandates strict adherence to ITAR and EAR compliance. Additionally, the contractor must hold US/Canada Joint Certification Program certification. The final deliverable consists of 28 fully tested control boxes, with a response deadline for the solicitation set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 21 hours ago

DEADLINE

Supply of Fixed Wire Wound Resistors (NSN 5905-01-061-7401)This subcontract involves the manufacture or procurement of five fixed wire wound resistors meeting NSN 5905-01-061-7401 specifications for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The resistors must adhere to strict technical standards, including IPC/JEDEC J-STD-609 for lead finish, MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. Performance will take place at Hill AFB. The agreement mandates strict adherence to the Buy American Act and requires compliance with DFARS 252.204-7012 regarding cybersecurity reporting. Interested parties must respond by November 9, 2026, for this requirement categorized under NAICS code 334419.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

Supply of Push Switches (NSN 5930-01-175-9916)This subcontract, issued by the Department of Defense under the DLA Weapons Support Electrical Devices Division, involves the supply of specialized push switches identified by NSN 5930-01-175-9916. The contractor is responsible for manufacturing or sourcing switches that strictly adhere to L3 Technologies P/N G-782-006 specifications and DLA Master List requirements. Key compliance mandates include adherence to mercury restrictions and DFARS Buy American standards, with final physical delivery directed to DLA Distribution DDSP. The project is designated as a Total Small Business Set-Aside under NAICS code 334419, with performance taking place in New Cumberland. To ensure quality and longevity, all deliverables must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-28786 standards for packaging and preservation. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 21 hours ago

DEADLINE

Supplier of Differential Pressure Sensors (NSN 4940-01-651-4705)This subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the provision of one Differential Pressure sensor, identified by NSN 4940-01-651-4705. The selected supplier is responsible for manufacturing or sourcing hardware that adheres to all technical specifications, ensuring packaging meets MIL-STD-2073-1E and RP001 standards, and marking shipments according to MIL-STD-129. The final unit must be delivered by April 20, 2027, to support prime contractors fulfilling DLA supply contracts. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334419, with the place of performance located in Tracy, California. Compliance with DFARS Buy American requirements and Telecommunications prohibitions is mandatory. Interested parties must have responded by the deadline of November 9, 2026, to be considered for this procurement.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

Manufacture and Supply of Electrical Control Panel (P/N 78600-03011-041)This subcontract involves the manufacture and supply of Electrical-Electronic Control Panels, specifically part number 78600-03011-041, for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating panels according to Sikorsky Aircraft Corporation specifications and integrating electronic components in adherence to RA001 requirements. All completed units under NSN 6110-01-696-8782 must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The agreement mandates strict compliance with the Buy American Act and DFARS 252.204-7012 regulations. Performance of the contract will take place in Tracy, California. Interested parties must note the response deadline of November 4, 2026, for this requirement categorized under NAICS code 334419.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Supply of Fixed Ceramic Capacitors (NSN 5910013755075)This subcontract involves the supply of 288 fixed ceramic capacitors to the DLA Weapons Support Active Devices Division for use by prime contractors. The required components must match NSN 5910013755075, specifically part numbers 047-003288-001 or 923CX7R153K050B, and must strictly adhere to MIL-DTL-39028 specifications. All units are to be delivered to DLA Distribution San Joaquin in Tracy, California. The contractor is responsible for ensuring that packaging meets MIL-STD-2073-1E and MIL-STD-129 standards, with marking performed according to IPC/JEDEC J-STD-609. Additionally, the provider must maintain compliance with NIST SP 800-171 security requirements. The project falls under NAICS code 334419 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690016685478)

All Other Miscellaneous Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 21 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 21 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 21 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Manufacturing of Military-Grade Electrical Leads

ASC COMMODITIES DIVISION

POSTED

CLOSED

Electronic Component Supply (NSN 5998016306996)

Defense Logistics Agency

POSTED

DEADLINE

Microcircuit Manufacturing and Supply (NSN 5962-01-281-4172)

Defense Logistics Agency

POSTED

DEADLINE

Rotary Switch Supply (Commercial Off-the-Shelf Item)

Defense Logistics Agency

POSTED

DEADLINE

LIGHT, INDICATOR

Solicitation # SPE8E7-26-T-3264

Defense Logistics Agency

POSTED

CLOSED

Solicitation # SPE7M2-26-T-5696

NUCLEAR REACTOR PROGRAM

POSTED

CLOSED

SWITCH ASSEMBLY

Solicitation # SPE7M2-26-T-5695

NUCLEAR REACTOR PROGRAM

POSTED

CLOSED

CRYSTAL UNIT, QUARTZ

Solicitation # SPE7M0-26-T-5649

Defense Logistics Agency

POSTED

DEADLINE

HORN, WAVEGUIDE

Solicitation # SPE7M5-26-T-282R

Defense Logistics Agency

POSTED

DEADLINE

SWITCH, SENSITIVE

Solicitation # SPE7M8-26-T-5240

ELECTRICAL DEVICES DIV

POSTED

CLOSED

ELECTRONIC COMPONEN

Solicitation # SPE7M1-26-T-133L

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7M8-26-T-5353

ELECTRICAL DEVICES DIV

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS