Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Wiring Harness Manufacturing and Assembly

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the full manufacturing, assembly, and quality testing of military-spec wiring harnesses designated by NSN 6150-01-201-4799, aligned strictly with approved engineering drawings and applicable military standards. The work encompasses end-to-end production including material procurement, precise assembly, and rigorous quality verification to ensure compliance with defense requirements. The subcontract is issued under the NAICS code 334419 for other electronic component manufacturing and is managed by the Defense Logistics Agency within the Department of Defense. The place of performance and specific delivery location are not detailed, but the work must be performed to meet exacting military specifications without deviation. The contract was posted on July 16, 2026, and is accessible via the DIBBS system under contract number SPE4A625D5475.

General Info

Manufacture and test military wiring harnesses per NSN 6150-01-201-4799 to defense standards under DLA oversight.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-25-R-X553.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONTRACTOR FIRST ARTICLE TEST

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full manufacturing, assembly, and quality testing of military-spec wiring harnesses (NSN 6150-01-201-4799) per engineering drawings and military standards.

Similar Contracts

Same NAICS industry code

61--CABLE ASSEMBLY,SPEC

Solicitation # SPE4A626T21HM

POSTED

DEADLINE

59--HEAT SINK,ELECTRICA

Solicitation # SPE7M526T430W

DLA Land And Maritime

POSTED

DEADLINE

49--MAINTENANCE KIT,VEHICU

Solicitation # SPE7L326T196B

DLA Land And Maritime

POSTED

DEADLINE

Capability Trunk Cable

Solicitation # 80NSSC26934493Q

This procurement is for the purchase and delivery of 2860 feet of Capability Trunk Cable, structured as 13 continuous 220-foot spools, under a Firm-Fixed-Price contract with a Total Small Business Set-Aside under FAR 19.5 and NAICS code 334516. The cable must meet exact technical specifications including UL2464 rating, 64 conductors of 20 AWG tinned copper, 34 AWG tinned copper braid overall shield, PVC jacketing, and eight individually shielded sub-cables each composed of 20 AWG 19x32 stranded tinned copper conductors with PVC insulation and distinct color coding. The requirement is restricted to authorized resellers only and is designated as Brand Name or Equivalent, ensuring only compliant products are submitted. Delivery is FOB Destination to B4010, Stennis Space Center, Mississippi 39529, with a strict lead time of two weeks after receipt of order, and all shipping costs must be included in the quoted price. All packages must be clearly marked “UNITED STATES GOVERNMENT” and the contracting agency, accompanied by two copies of shipping documentation, and subject to duty-free entry procedures per Harmonized Tariff Schedules, including gross weight, estimated value, carrier identification, and contract number. Proposals must include the offeror’s CAGE/UEI code, confirm FOB Destination terms, specify delivery lead time, and provide a primary point of contact name and email, along with a secondary contact with phone and email. Offers must be submitted via email to Shanna L. Patterson at Shanna.l.Patterson@nasa.gov with the solicitation number 80NSSC26934493Q in the subject line, no later than June 16, 2026 at 7 a.m. CT. Questions must also be submitted in writing by June 15, 2026 at 7 a.m. CT; telephone inquiries are not permitted. Bidders must be registered in SAM.gov and demonstrate technical acceptability to be considered under the Lowest Price Technically Acceptable evaluation method; failure to meet any requirement, including specification compliance or documentation, results in disqualification. The government will not pay by credit card, and contractors must comply with U.S. export controls including ITAR and EAR, flow down obligations to subcontractors, carry all regulatory recordkeeping

NASA Shared Services Center

POSTED

DEADLINE

Sources Sought, Test Fixture, Azimuth, NSN: 4931-00-769-1596

Solicitation # W912CH-26-Q-A059

POSTED

DEADLINE

59--SWITCH,SENSITIVE

Solicitation # SPE7M826T6061

DLA Land And Maritime

POSTED

DEADLINE

59--SWITCH,ELECTRONIC

Solicitation # SPE7M826T6112

DLA Land And Maritime

POSTED

DEADLINE

NSN 6150-01-586-3999

Solicitation # SPE4A6-26-Q-1247

The Defense Logistics Agency Richmond is conducting market research to identify qualified sources capable of manufacturing the item identified by NSN 6150-01-586-3999 under NAICS code 334419. This effort is purely exploratory and does not constitute a solicitation or commitment to award a contract; responses are voluntary and no financial reimbursement will be provided for costs incurred. Organizations interested in participating must submit detailed capability statements including organization name, contact information, ownership structure, and evidence of their ability to manufacture the item from component parts through final inspection, testing, packaging, and shipment. Additional requirements include demonstrating capacity for supply chain management, handling diminishing manufacturing sources, forecasting production needs, and managing logistics for serviceable assets. The government will use submissions to determine whether this requirement can be set aside for small businesses or will proceed as full and open competition, potentially resulting in multiple awards. Respondents must be prepared to show they have the financial, technical, and human capital resources to meet performance-based service acquisition standards, including adherence to tight schedules, cost control, performance tracking, personnel retention, and risk mitigation strategies. Technical orders and qualification specifics are not available at this time. All submissions must be emailed to brenda.spell@dla.mil by 4 August 2026 at 3:00 PM EST, and no telephone inquiries or feedback on submissions will be accepted. The place of performance is Richmond, Virginia, and the agency responsible for this effort is DLA Aviation within the Department of Defense.

POSTED

DEADLINE

59--ASSY,PLATE AND CAPA, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYAED

The contract pertains to the repair of a specific assembly, Plate and Capa, with NIIN 016779934 and part number NV823192-3, used in the Sub Atmosphere Control system, under NSN 7H-5910-016779934. The Government intends to award this contract on a sole source basis to Hamilton Sunstrand Corp. (CAGE: 73030), the Original Equipment Manufacturer and the only known source capable of providing repair support for this part due to proprietary data and lack of government ownership of design or technical data. This procurement is authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302, and no other suppliers can satisfy the requirement. While all responsible sources may submit capability statements, no competitive procurement is anticipated, and the award is expected to be made to the designated OEM. The contract duration is one year, with delivery to DLA Distribution Norfolk, VA, and UID marking and Buy American provisions will apply. The procurement follows FAR Part 15 procedures, excluding commercial item acquisition policies. Solicitation will be issued electronically via NECO on or about 7 August 2026, with proposals due by 7 September 2026 and an anticipated award date of 22 September 2026. All submissions must be sent via email to Taylor Weidman, and no hard copies or telephone requests will be accepted. The NAICS code is 334419, and the PSC is 5910. Although the initial notice indicated a Total Small Business Set-Aside, the solicitation will not be restricted to small businesses, and the referenced set-aside classification appears to be in error.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

59--SWITCH,PUSH

Solicitation # SPE7M826T6077

DLA Land And Maritime

POSTED

DEADLINE

59--SWITCH HOUSING

Solicitation # SPE7M826T6078

DLA Land And Maritime

POSTED

DEADLINE

61--CABLE ASSEMBLY,SPECIAL

Solicitation # SPE7L426T6411

DLA Land And Maritime

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

LINER, FUEL TANK

Solicitation # SPE4A7-26-R-0714

The contract is for a liner, fuel tank item designated for use on the UH-60 helicopter, identified by NSN 1560-011215115 and part number 70211-03010-105, manufactured in full compliance with drawing 78286 70211-03010, revision K dated November 30, 2017. This procurement is structured as an indefinite quantity contract with a two-year base period and no options, issued as a total small business set-aside, with an estimated annual requirement of 80 units. All delivery of production units must be completed within 300 days of order placement, with FOB origin terms and inspection and acceptance performed at the manufacturer’s location. Access to technical data associated with this item is restricted to contractors certified under DOD 5220.22M, requiring submission of DD Form 2345 to the Defense Logistics Information Service to gain authorization. The solicitation, numbered SPE4A726R0714, will be made available exclusively through the DLA Internet Bid Board System on or about August 20, 2026, with proposals due by September 21, 2026. No paper copies will be distributed, and potential bidders must use the latest Adobe Acrobat Reader to access the PDF solicitation documents. The contracting office is located in Richmond, Virginia, with primary point of contact Ryan Loeffelholz.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Cafeteria & Catering Operation - DLA Susquehanna

Solicitation # NAFUA1-26-R-0002

The Defense Logistics Agency Family & Morale, Welfare, and Recreation is seeking qualified offerors to operate cafeteria and catering services at the Defense Distribution Center Susquehanna in New Cumberland, Pennsylvania, under solicitation NAFUA1-26-R-0002. This opportunity requires the full provision of labor, equipment, materials, and incidentals necessary to run daily food service operations, with the explicit understanding that the government will not fund these services and that the contractor is expected to generate revenue independently through customer traffic and sales. All proposals must be submitted by 4:00 PM EDT on August 27, 2026, and inquiries must be submitted in writing no later than 4:00 PM EDT on August 12, 2026. Site visits to the location are permitted but must be arranged through the Contracting Officer and completed no later than August 7, 2026. The contract is classified under NAICS code 722310 with no set-aside designation, and all communications should be directed to Michael Thompson at michael.3.thompson@dla.mil or 571-643-3754.

Food Service Contractors

POSTED

DEADLINE

Management of Government-Owned Contractor-Operated (GOCO) retail fuel facilities at Altus AFB, OK, Dyess AFB, TX, McConnell AFB, KS, Scott AFB, IL, Offutt AFB, NE, Whiteman AFB, MO.

Solicitation # SPE603-26-R-0527

The Defense Logistics Agency (DLA) Energy is soliciting six separate firm-fixed-price contracts to manage, maintain, and operate Government-Owned, Contractor-Operated (GOCO) retail fuel facilities at six U.S. Air Force bases: Altus AFB, OK; Dyess AFB, TX; McConnell AFB, KS; Offutt AFB, NE; Scott AFB, IL; and Whiteman AFB, MO. The contract requires the selected contractor to ensure the safe, accurate, and timely receipt, storage, transfer, issuance, and accountability of all Defense Wide Working Capital Fund (DWWCF)-owned petroleum products, with strict adherence to environmental, safety, security, and quality control standards. Operations must support base missions, airshows, deployments, exercises, and contingencies under all conditions, including heightened security and adverse weather, while maintaining 24/7 self-service automated fuel station availability for ground vehicles. The contractor is responsible for operator and system maintenance of all facilities, equipment, vehicles, and systems, and must conduct training to ensure personnel are fully qualified. All work must conform to detailed Performance Work Statements (PWS) for each location, including staffing, dispatching, product receipt, inventory management, laboratory testing, and quality surveillance. The procurement is set aside entirely for Service-Disabled Veteran-Owned Small Businesses (SDVOSBs) under NAICS code 493190. Offers are due by August 10, 2026, and will be evaluated under a Lowest Price Technically Acceptable (LPTA) approach, where technical compliance is a pass/fail gate requiring an Acceptable rating across all sub-factors: staffing, operations, maintenance, and contractor-furnished facilities and equipment. Contracts have a four-year base period from November 1, 2026, to October 31, 2030, with a five-year option period through October 31, 2035, and a potential six-month extension through April 30, 2036. The contractor must submit a Quality Control Plan acceptable to the Government, comply with ISO standards if used, and adhere to calibration requirements per ISO 10012. The contract mandates a Security Plan addressing physical, personnel, information, and operational security with contingency procedures for power outages, access controls, and Force Protection Conditions. The contractor assumes fiduciary responsibility for all Government-owned fuel, maintains custody without transferring title, and must

Other Warehousing and Storage

POSTED

DEADLINE

Butterfly Valve Manufacturing and Supply

Industrial Valve Manufacturing

POSTED

DEADLINE

in about 22 hours

GLOVES, MEN'S AND WOMEN

Solicitation # SPE1C1-26-T-1644

POSTED

DEADLINE

AIR CONDITIONER

Solicitation # SPE8E8-26-T-5242

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

NUT, SELF-LOCKING, EXTEN

Solicitation # SPE4A6-26-T-15MR

Solicitation SPE4A6-26-T-15MR, issued by the ASC Commodities Division of the Department of Defense, is a simplified acquisition for 474 units of self-locking nuts with extended double washers (NSN 5310-01-484-4870). The total contract value is 474.00 dollars, with a unit price of 1.00 dollar. The required delivery date is February 27, 2027, with a need ship date of February 7, 2027. Delivery is set as FOB Origin, and the items are to be shipped to the DLA Distribution Depot Hill at Hill AFB, Utah. Quality assurance and technical compliance are governed by several standards, including MIL-STD-1916 or ASQ H1331 for sampling, and MIL-STD-129 for marking and labeling. Packaging must adhere to ASTM D3951 and RP001, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination. The contract incorporates various FAR and DFARS clauses, including requirements for hazardous material identification, cyber incident reporting, and the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment requests.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

in about 22 hours

Solicitation # SPE7M4-26-T-348V

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-356L

POSTED

DEADLINE

NUT, SELF-LOCKING, BLIND

Solicitation # SPE4A6-26-T-20QY

POSTED

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE8E5-26-T-4024

DLA Troop Support is soliciting quotes for the procurement of observation windows under NSN 9340014392377. The requirement is split into two lines: Line 0001 for 10 units to be delivered within 261 days after the order, and Line 0002 for one unit to be delivered within 30 days after the order. All items are to be delivered to DLA Distribution Anniston. This opportunity, identified by solicitation number SPE8E526T4024, is a total small business set-aside under NAICS code 333924. Interested and responsible sources must submit their quotes electronically by the deadline of August 31, 2026. The procurement is managed by the Department of Defense through their office in Philadelphia, Pennsylvania.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L5-26-T-5056

POSTED

DEADLINE