WMSL DRYDOCK IDIQ (USCG BASE ALAMEDA) FY2023 - FY2026 MAINTENANCE AND REPAIR OF MULTI USCG WMSL CUTTERS

The USCG SFLC CPD C&P2 LRE is conducting market research in order to identify firms who possesses the capabilities to satisfy the USCG's requirement. Requirement: This requirement is for U.S. Coast Guard (USCG) multi-year, multi-vessel dry dock maintenance and repairs for U.S. Coast Guard Cutters (USCGCs) homeported at USCG Base Alameda, California. This requirement will primarily involve 418 Maritime Security Cutter-Large (WMSL) USCGCs BERTHOLF, WAESCHE, STRATTON, and MUNRO. Dry dock maintenance and repairs include: vessel dry-docking, tank inspection and preservation, interior and exterior ship structure preservation, propulsion shafting strain gauge alignment, propulsion shafting inspections, propulsion shaft seal maintenance, propeller cleaning and inspection, controllable pitch propeller hub assembly maintenance, fathometer transducer maintenance, doppler speed log maintenance, sea strainer overhauls, sea valve overhauls, rudder maintenance, rudder seal maintenance, anchor and anchor chain maintenance and preservation, stern boat ramp maintenance and preservation, transom doors inspection and maintenance, side port door inspection and maintenance, cathodic protection system maintenance, sea trial performance support, and similar work. Scope of Work: The Contractor must provide all necessary facilities, materials, equipment, and personnel to perform dry dock maintenance and repairs to the aforementioned USCGCs homeported in Alameda, CA. All dry dock work for these cutters during FY23-FY26 are restricted to a shipyard within a 50-mile commuting radius of these vessels homeport of Alameda, CA as a necessary military consideration in order to maximize the operational readiness of the vessels to complete mission requirements and maintain crew proficiency standards. The contract is intended to encompass routine dry dockings of USCGCs BERTHOLF, WAESCHE, and STRATTON as well as one unplanned dry docking of a WMSL-class vessel between FY23 and FY26. Draft Work Item List (Definite & Option Items): Hull, 3D Laser Scan Hull Plating (U/W Body), Inspect Propulsion Shaft Fairwaters And Rope Guards, Inspect U/W Body, Preserve (Partial-Condition A) U/W Body, Preserve (100%) Hull Plating (Freeboard), Ultrasonic Testing Hull Plating (Freeboard), Preserve - Partial Hull Plating (Freeboard), Preserve "100%" Superstructure, Preserve "100%" Mast, Preserve Deck Covering (Slip Resistant) Mast, Renew Chain Lockers, Clean And Inspect Chain Lockers, Preserve "100%" Voids (Non-Accessible), Internal Surfaces, Preserve Voids (Non-Accessible), Leak Test Sideport Shell Door, Level 2 Propulsion Shafting Strain Gage, Check Alignment Propulsion Shaft Bearings (External) Clearances, Check Propulsion Shaft Coating, Inspect, Test, And Repair Propulsion Shaft Seals (Mechanical), Overhaul Renew Propulsion Shaft, Inflatable Seal Controllable Pitch Propeller Hub Assembly, General Maintenance Doppler Speed Log Valve, Overhaul Doppler Speed Log, General Maintenance Deep Water Transducer, General Maintenance Shallow Water Transducer, General Maintenance Sea Valves and Waster Pieces, Overhaul and Renew Seawater Strainers (All Sizes), Overhaul and Inspect Cascade Orificial Resistive Device, Clean and Inspect Steering Gear (General), Overhaul Rudder Stock Bearings Clearances, Check Rudder Stock Seals, Clean And Inspect Bow Thruster Unit (General), Overhaul Anchor Chain(s) and Ground Tackle, Inspect and Preserve Hawse Pipes, Preserve Small Boat Ramp, Level 2 Transom Doors, Inspect and Repair Impressed Current Cathodic Protection System Dielectric Shield (Capastic Fairing), Renew Impressed Current Cathodic Protection System, Inspect And Maintain Cathodic Protection (Zincs), Renew Impressed Current Cathodic Protection System Anodes, Renew Impressed Current Cathodic Protection System Reference Cells, Renew Drydock Sea Trial Performance, Support, Provide Temporary Services, Provide Additional Work (Labor, Materials, Subcontractors)--Margin Tow Bitt, Modify and Hawser, Replace Stern Door, Speed Enhancement & Door Extension Stern Ramp Rails, Modify Engineering Changes--To Be Determined Non-Casualty Work Requests--To Be Determined Voyage Repairs--To Be Determined Anticipated Period of Performance: The period of performance is anticipated to be for calendar days with the start date of 01 April 2023 to 30 September 2026 consisting of a 6-month base ordering period and three 1-year optional ordering periods. SUBMISSION OF INFORMATION: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this Sources Sought Notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to Marcella Brown (E:Marcella.V.Brown@uscg.mil) and Jackie Warfield (E: Jacquelyn.L.Warfield@uscg.mil) no later than the date identified within this notice with the following information/documentation: (1) Name of Company, Address and DUNS No. (2) Point of Contact and Phone Number (3) Business Size applicable to the NAICS Code: a. 8(a) Small Business Concern; b. HubZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern (4) Documentation Verifying Small Business Certification (5) Statement: Statement on how your company will do the work and that your company will submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. (6) Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant. SAM: Interested parties should register in the System for Award Management (SAM), formerly known as Central Contractor Registration (CCR), as prescribed in FAR 52.232-33. SAM can be obtained by accessing the internet at www.sam.gov or by calling 1 (866) 606-8220. Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Quotation or a Request for Proposals. It is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered as a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. At this time no solicitation exists; therefore, do not request a copy of the solicitation. After a review of the responses received, a pre-solicitation notice and solicitation may be published on the Beta.SAM website. It is the potential offeror's responsibility to monitor Beta.SAM Contract Oppurtunities for release of any futute solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.