Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Xylem Flygt Submersible Pump

Active
W3555-272786International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Government of Canada, through the Department of National Defence, is seeking a specific XYLEM FLYGT CS222-3 3.6/460/3 16M SS LAV 3060.390-1360 submersible pump for use in the Drydock at the Fleet Maintenance Facility in Cape Breton. This is a no-substitute requirement due to strict physical and operational constraints within the Drydock Tunnel, where any alternative pump would necessitate extensive and costly modifications to existing infrastructure, posing significant risks to compatibility, installation, operation, and maintenance. The pump must meet exact dimensional and functional specifications to integrate seamlessly without alteration to current systems. Solicitation W3555-272786 was posted on August 10, 2026, with responses due by September 1, 2026. The procurement is classified under GSIN N4320 and falls under federal agency sourcing. The place of performance is Victoria, Canada, and all inquiries must be directed to Contracting Authority Sorin Fetcas via email at sorin.fetcas@forces.gc.ca or by phone at 250-858-8904. The solicitation is publicly accessible through the CanadaBuys portal, and only the specified model is acceptable to ensure operational integrity and avoid unplanned expenditures tied to infrastructure adaptation.

General Info

Canada seeks exact XYLEM FLYGT pump for Cape Breton Drydock, no substitutes allowed, bid due September 1, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment ManufacturingView NAICS

Place of Performance

Victoria, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
Contacts
Sorin FetcasContracting Authority

Full Description

Show more
Fleet Maintenance Facility CAPE BRETON requires a Flygt Submersible Pump to be used in the Drydock. Goods and Services Identification Number (GSIN): N4320 Make and Model: XYLEM FLYGT CS222-3 3.6/460/3 16M SS LAV 3060.390-1360 This is a no-substitute requirement. The existing infrastructure within the Drydock Tunnel imposes strict physical size and configuration constraints that cannot be met by alternative pumps without significant modifications to the facility. The use of any other pump would introduce compatibility, installation, operational, and maintenance challenges, and would require costly engineering changes to the existing infrastructure.

Similar Contracts

Same NAICS industry code

NAICS: 333914
New
DIBBS
PUMP, ROTARY
Solicitation # SPE7M1-26-Q-1347
This contract is for the procurement of four rotary pumps, identified by NSN 4320-01-503-1000 and part number MHC729, under solicitation SPE7M1-26-Q-1347. The item is classified as a critical application item and must comply with Item Unique Identification (IUID) requirements per MIL-STD-130 and the DFARS clause 252.211-7003. Pricing is firm fixed price with no tolerance for quantity variance—exactly four units must be delivered. The delivery schedule requires fulfillment within 30 days after delivery order issuance, with shipment originating from the supplier’s location and inspection and acceptance occurring at the destination. Packaging must strictly adhere to MIL-STD-2073-1E with specified methods for preservation, wrapping, and containment, and marking must follow MIL-STD-129 without any special labeling. Palletization must meet DLA’s packaging requirements. The item is to be delivered to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, Pennsylvania, 17070-5002, with transportation governed by DLA procedural notes C19 and C20. The contract references technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and controlled by the revision in effect on the solicitation issue date. The procurement is under NAICS code 333914 and falls under the Department of Defense, managed by the Maritime Supply Chain office. The primary point of contact is Kelsey Schlagenhaft, and the material need date is July 27, 2026. The solicitation was posted on August 10, 2026, with a response deadline of August 17, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333914
New
Federal
NEW Alcatel ACP15G (for Trace Corrosive Applications) Multi-Roots Compact Dry Roughing Pump with 1/4 inch G prt Gas Ballast, 8.2 CFM, DN25 Inlet, DN16 Exhaust
Solicitation # RFQSS490056
The Nuclear Energy and Fuel Cycle Division at Oak Ridge National Laboratory is seeking a new Alcatel ACP15G Multi-Roots Compact Dry Roughing Pump specifically designed for trace corrosive applications, with a gas ballast port of 1/4 inch G, a flow rate of 8.2 CFM, a DN25 inlet, and a DN16 exhaust; alternatives acceptable as equal to the specified brand are permitted. The device must meet all technical requirements outlined in Attachment C of the Bill of Materials for solicitation RFQSS490056, and the procurement is classified under NAICS code 333914 for vacuum pump manufacturing. The solicitation was posted on August 10, 2026, with responses due by August 14, 2026, at 9:00 PM Eastern Time, and the contract will be performed at the laboratory’s facility in Oak Ridge, Tennessee, with delivery expected to the specified location at 37830 zip code. The contract is managed by Oak Ridge National Laboratory under its contractor status with the U.S. Department of Energy, and inquiries should be directed to Scott Scarbrough, the primary point of contact, via email at scarbroughws@ornl.gov. No set-aside provisions are indicated, meaning the opportunity is open to all eligible vendors without restrictions based on small business, veteran-owned, or other classifications. The procurement is categorized as a combined solicitation, likely integrating both purchase and potential service elements, and the full details and technical specifications are accessible through the official SAM.gov link provided. The ordering organization is Ot-Battelle LLC, a DOE contractor, and the equipment is critical for supporting specialized nuclear research operations requiring corrosion-resistant vacuum systems.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 23 hours ago

DEADLINE

in 3 days
View Details
NAICS: 333914
New
Federal
Range Fuel Tank
Solicitation # W50S7K26A006
The contract seeks a transportable fuel storage tank and pump kit designed for diesel fuel operations, with specific technical and certification requirements. The storage tank, identified as the 40TCG TRANSCUBE Global Series, must have a safe fill level of 4,000 liters or 1,003 US gallons, feature a bundled dual-wall design with 110% secondary containment, and function as an Intermediate Bulk Container (IBC). It must be UN approved for transport, UL Listed, built to North American specifications, and finished in white. The accompanying pump kit, modeled as the V20-115ADK WESTERN PUMP KIT, requires 115VAC power, delivers a minimum flow rate of 20 gallons per minute, and includes one-inch delivery hardware. The pump must be fully compatible with the designated storage tank to ensure seamless integration and operational reliability upon delivery. Delivery is required to MS/CRTC Range at 4715 Hewes Ave., Gulfport, MS 39507. This solicitation, numbered W50S7K26A006, was posted on August 10, 2026, with responses due by August 19, 2026, and is structured as a Small Business Set Aside under NAICS code 333914. The contracting activity falls under the Department of Defense, specifically the W7NH Uspfo Activity Msang CRTC. Primary point of contact is Mr. James Nelson, reachable via phone and email, with MSgt Andrew Cates listed as secondary contact. The procurement is classified as a combined solicitation and must be responded to through the SAM.gov portal.
W7NH Uspfo Activity Msang Crtc

POSTED

about 23 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333914
New
SLED
2368 APOLLO PARK IRRIGATION DEP WELL PUMP
Solicitation # RFB-IS-27200087
The County of Los Angeles is soliciting bids for the procurement of a pump system designated for the 2368 Apollo Park Irrigation Department Well, with the solicitation number RFB-IS-27200087. The contract focuses on mechanical and shaft seals compatible with steam and hot water applications, indicating the pump is intended for use in high-temperature irrigation or water circulation systems. The bidding window closes on August 14, 2026, at 12:00 PM Pacific Time, and interested vendors must submit responses by this deadline to be considered. All inquiries should be directed to Arianna N. Vista at AVista@isd.lacounty.gov or (323) 267-3530, as Biddingo.com provides only informational summaries and does not manage the actual solicitation process. Vendors interested in participating are required to register on the County of Los Angeles’s official procurement portal to access and respond to the full bid documentation, as details not included in this abstract may be critical to compliance. While the location of performance is specified as Los Angeles, CA, with a ZIP code of 90012, other details such as NAICS code, set-aside type, and exact delivery requirements are not provided in the available data. Bidders are cautioned to consult the originating agency directly for complete terms, technical specifications, and eligibility criteria, as Biddingo.com disclaims responsibility for third-party content and accuracy of supplementary materials accessible via external links.
County of Los Angeles

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 333914
New
DIBBS
Precision Manufacturing of Centrifugal Pump RotorThe contract calls for the precision fabrication of a high-reliability centrifugal pump rotor with part number F-19000, designed for use in critical defense and hazardous material handling applications where strict military standards and flawless performance are non-negotiable. The work requires advanced machining capabilities and adherence to stringent quality controls to ensure operational integrity under extreme conditions, making it essential that the supplier possesses proven experience in defense-grade manufacturing and materials compliance. The procurement is structured as a subcontract and specifically set aside for Women-Owned Small Businesses, leveraging the NAICS code 333914 to target qualified small enterprises in the pump and pumping equipment manufacturing sector. Performance of the work is required at a designated location in Tracy, California, with a zip code of 95304-5000, and all deliverables must meet the technical and certification benchmarks expected for defense-critical components. The solicitation was posted on August 9, 2026, with responses due no later than August 20, 2026, leaving a tight window for qualified vendors to submit proposals. The contracting office隶属于 the Fluid Handling Division under the Department of Defense, underscoring the mission-critical nature of the component and the high level of oversight expected throughout the manufacturing and inspection process. The designated DIBBS platform provides the official portal for submissions and additional procurement details.
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333914
New
DIBBS
COUPLING, SHAFT, RETAINE
Solicitation # SPE7M1-26-T-268N
The contract pertains to the procurement of a COUPLING, SHAFT, RETAINER, identified by NSN 4320011831924, for use on F110 engines under solicitation SPE7M1-26-T-268N. This item is classified as a commercial item and is designated as a critical application component with primary suppliers being General Electric Company and Eaton Aerospace, LLC, both producing part number 393479. The requirement is for 15 units at a unit price of $15.00, totaling $225.00, to be delivered FOB origin within 165 days of order, with an original delivery deadline of January 13, 2027, and a need ship date of February 2, 2027. Delivery is to be made to the DLA Distribution Depot in Tinker AFB, Oklahoma, with both inspection and acceptance occurring at the destination. The item is subject to strict packaging and labeling standards per ASTM D3951 and MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking precedence; palletization must follow RP001 guidelines and include 2D Data Matrix barcodes. The contract mandates electronic invoicing through Wide Area WorkFlow, and all supplies must adhere to transportation directives specified in DLAD PROC NOTES C19 and C20. No pricing or contract value is fully defined beyond the unit cost, and option quantities are not included. The solicitation prohibits physical submissions and requires all responses via the DIBBS portal by August 20, 2026. The contract incorporates multiple FAR and DFARS clauses governing equal opportunity, employment verification, trafficking in persons, sustainable products, hazardous material identification, cybersecurity safeguards, subcontracting, inspection, default, and payment processing. Deviations are noted for clauses related to safeguarding systems, changes, subcontracting, and NIST SP 800-171 compliance. The supply is subject to restrictions on hexavalent chromium, export control, and prohibitions on acquiring items from communist Chinese military companies. Offerors must comply with UEI and CAGE code requirements and submit representations regarding small business status, though no actual certifications have been completed in the solicitation. Packaging must be marked per MIL-STD-129, and hazardous materials must be labeled under 29 CFR 1910
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333914
New
DIBBS
ROTOR, PUMP
Solicitation # SPE7M4-26-T-326H
The contract requires the supply of four centrifugal pump rotors, part number F-19000, with NSN 4320-01-233-2417, designed for critical applications and subject to stringent environmental and safety controls. Delivery is due within 165 days of award, with a required ship date of February 2, 2027, and an original delivery deadline of March 15, 2027, to the destination warehouse in Tracy, California. The item must be delivered FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The pump must not contain intentional mercury or mercury compounds except in functional components like batteries, instruments, or chemical reagents specifically authorized by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. Preservation and packaging must strictly follow MIL-P-16789 for centrifugal pumps and MIL-STD-2073-1E for packaging, with Level A preservation applied when preservation method ZZ is used. Marking must conform to MIL-STD-129 with no special marking required, and palletization must adhere to DLA Packaging Requirements for Procurement. The contract is issued under solicitation SPE7M4-26-T-326H as a Women-Owned Small Business Set-Aside under NAICS code 333914, with proposals due by August 20, 2026, via the DLA Internet Bid Board System. The contract value is $16.00 for the four-unit order. Contract administration requires electronic invoicing via WAWF, and payment handling is governed by DFARS clauses specifying contact information in the DD 1155. Compliance clauses include prohibition of hexavalent chromium and mercury misuse, cybersecurity requirements under NIST SP 800-171 via DFARS 252.240-7997 and safeguarding of covered defense information via 252.204-7012, restrictions on procurement of telecommunications equipment from prohibited Chinese entities, whistleblower protections, and controls on disclosure of government work products. The offeror must hold a valid UEI and CAGE code and certify WOSB status, with all compliance representations and certifications submitted electronically through DIBBS. The government retains inspection and acceptance authority
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Government of Canada → Department of National Defence

Same awarding agency