Top

Z -- Paint Floor, Bldg 316

Active

Reference-Number-F2E3CR8052A001Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

This contract involves applying a specialized floor coating system to the mechanical room floor in Building 316, specifically Room 201, which covers approximately 1,700 square feet. The existing floor is bare concrete and has never been painted. The room contains various equipment including pumps, piping, floor drains, air handlers, and raised concrete platforms supporting this equipment. The contractor is required to apply the coating according to the manufacturer’s specifications, covering the floor and the sides of raised platforms up to one inch in height. Coating must be applied around equipment, support brackets, piping, and floor penetrations to prevent leaks, and beneath any equipment that is not bolted down. Additionally, the coating is to be extended to seal the joint between the walls and the floor around the room perimeter. The scope also includes removing and replacing the vinyl wall base around the mechanical room’s perimeter, with the contractor required to submit available color options for the new base. The work must adhere to the requirements outlined in the Statement of Work and accompanying attachments. This solicitation is a total small business set-aside under NAICS code 238330, managed by the Department of Defense at Holloman Air Force Base, New Mexico. Contract specialists and officers are designated points of contact to manage inquiries and contract administration.

General Info

Apply floor coating and replace vinyl wall base in mechanical room, per manufacturer specs, DoD small business set-aside.

Agency

Department Of Defense → FA4801 49 Cons Pk

NAICS

238330 - Flooring Contractors

Place of Performance

1210 Forty Niner RoadHolloman AFB, NM 88330-7908, NM

Set-Aside

SBA

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhasePresolicitation

PostedMar 26

Presolicitation

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → FA4801 49 Cons Pk

Contacts2 people available

OfficeHOLLOMAN AFB, NM, 88330-8225, USA

Organization / AgencyDepartment Of Defense → FA4801 49 Cons Pk

Office AddressHOLLOMAN AFB, NM, 88330-8225, USA

Contacts

James E OrdwayContract Specialist

contact@example.gov

+1 (555) 000-0000

Theresa A. SandovalContracting Officer

contact@example.gov

+1 (555) 000-0000

Full Description

Apply a floor coating system over a mechanical room floor in Building 316. The room measures approximately 1,700 SF in area, and is filled with various objects such as pumps, floor drains, piping, air handlers, etc. A floor plan drawing and some pictures are attached. The floor plan drawing has a scale of 1:100. The mechanical room is designated as Room 201 on the drawing. The existing floor is bare concrete. It has never been painted. The Contractor shall install a floor coating system specifically designed and formulated for use in mechanical rooms. All installation work shall be in accordance with the manufacturer?s specifications and instructions. The floor has several raised concrete platforms on it to support the equipment. Apply the coating up the side of the platforms to a height of 1". Apply the coating around all the equipment, piping, support brackets, floor drains, and anything else that might be lying on the floor. If a piece of equipment is not bolted down, apply the coating beneath it. If it is bolted down, then apply the coating around it. The coating shall be applied in a manner to prevent any leaks from occurring around the existing penetrations through the floor. The Contractor shall also ensure that the joint between the walls and the floor around the perimeter of the room is sealed. The Contractor shall remove and replace the vinyl wall base around the perimeter of the mechanical room. Submit the available color choices for the new wall base. More details are included in the Statement of Work and attachments.