Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Z2DA--FY27 NRM | 557-23-104 | Replace Boiler Plant Steam Boilers | Construction (VA-27-00003633)

Active
36C24726Q0777Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Veterans Affairs → 247-NETWORK Contract Office 7 (36C247)View Agency

NAICS

236220 - Commercial and Institutional Building ConstructionView NAICS

Place of Performance

Carl Vinson VA Medical Center, Dublin, GA, 31021, USA

Set-Aside

SDVOSBC

Documents

(1)

36C24726Q0777.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSources Sought
Posted

Sources Sought

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → 247-NETWORK Contract Office 7 (36C247)
Contacts1 person available
OfficeAUGUSTA, GA, 30904, USA
Organization / Agency
Department Of Veterans Affairs → 247-NETWORK Contract Office 7 (36C247)
View Agency Profile
Office AddressAUGUSTA, GA, 30904, USA
Contacts
Lorna CraigContract Specialist

Full Description

Show more
SOURSES SOUGHT SYNOPSIS: This Sources Sought Notice is for market research and information purposes only at this time and shall not be construed as a solicitation or as an obligation on the part of the Department of Veterans Affairs (VA). The Department of Veterans Affairs, Network Contracting Office 07 (NCO 07) is conducting a market survey and is seeking potential sources for the Boiler Plant Replacement Construction Project at the Carl Vinson VA Medical Center located in Dublin, GA. This is intended to be set aside for Service-Disabled Veteran Owned Small Business. PROJECT DESCRIPTION: Contractor will provide management, supervision, materials, tools, and labor to replace three steam boilers in Building 27 at the Carl Vinson VAMC Dublin, Georgia. Work will include but is not limited to temporary boiler plant and control room, hazardous material abatement, demolition of existing plant equipment, piping, and electricity, installation of new plant equipment and piping, site work, fuel tank installation and piping, and emergency generator installation based on provided A/E design drawings and specifications. All work will be done in compliance with Federal, State, and local regulations. Wage determinations for Laurens County, Georgia will apply. Performance period is 730 days after issuance of Notice to Proceed. PROCUREMENT INFORMATION: The proposed project will be a competitive, firm-fixed-price contract utilizing the design-bid-build approach (Final Specifications and Drawings will be provided). The anticipated solicitation will be issued either as a Request For Proposal (RFP) in accordance with FAR Part 15, considering Technical and Price Factors or as an Invitation for Bid (IFB) in accordance with FAR Part 14 under Commercial Services FAR Part 12. The results and analysis of the market research will finalize the determination of the procurement method. It is anticipated that this will be set-aside for Service-Disabled Veteran Owned Small Business (SDVOSB). This project is planned for advertising in 1st Quarter of FY27. In accordance with VAAR 836.204, the magnitude of construction is between $20,000,000.00 and $50,000,000.00 (Note that the VAAR magnitude of construction is closer to the lower end of this range). The North American Industry Classification System (NAICS) code 236220 (size standard $45.0 million) applies to this procurement. The duration of the project is currently estimated at 720 calendar days from the issuance of a Notice to Proceed. The services for this project will include providing all construction related services such as providing labor, materials and equipment required to complete the project as per contract documents prepared by an independent Architect-Engineer firm. INSTRUCTIONS - CAPABILITY STATEMENT: Respondents shall provide a general capabilities statement to include the following information: Section 1: Provide company name, Unique Entity Identifier (UEI), company address, Point-of-Contact name, phone number and email. Section 2: Provide company business size based on NAICS code 236220. Also, provide business type (i.e., Large Business, Small Business, Service-Disabled Veteran Owned Small Business, Small Disadvantaged Business, Women-Owned Small Business, Hub Zone Small Business, etc.). Section 3: Provide information that the prime contractor has available bonding capacity. *Please ensure that the individual bonding capacity is in line with the VAAR Magnitude of Construction listed above. Section 4: Provide the type of work your company has performed in the past in support of the same or similar requirement. Please provide the following in your response: No more than three (3) contracts that your company has completed within the last seven (7) years that are of comparable size, complexity, and scope to this requirement. Include the project name, project owner and contact information as this person may be contacted for further information, project scope, building use (Example: Medical Facility, Office Building, etc.), project dollar value, start and completion dates. Provide specific examples that relate aspects of previous projects to the proposed project. Describe specific technical skills and key personnel your company possess to perform the requirements described under description of work. It is requested that interested contractors submit a response (electronic submission) of no more than four (4) single sided pages, single-spaced, 12-point font minimum that addresses the above information. This response must be submitted as a single application-generated (not scanned) PDF document that is less than or equal to 4MB in size. Please note that hard copies will not be accepted. Please also include a cover page, which includes, at a minimum: the company s name, address, Unique Entity Identifier (if available), socio-economic status, point-of-contact name, phone number, and e-mail address. Emails must reference the Sources Sought number 36C24726Q0777 Replace Boiler Plant Steam Boilers and project title in the subject line of their e-mail response. Submissions (responses) shall be submitted via email to the primary point of contact Lorna Craig lorna.craig@va.gov and copy (cc) to Zaire Naylor zaire.naylor@va.gov by August 7, 2026, at 3:00 PM EST. Phone calls will not be accepted. We are not accepting requests for further information. It is important to note that the capabilities statement submitted in response to this source sought shall not be considered as a bid or proposal. This notice is for information and planning purposes only and is neither to be construed as a commitment by the Government nor will the Government pay for information solicited. No evaluation letters and/or results will be issued to the respondents. Currently no solicitation exists; therefore, please do not request a copy of the solicitation. If a solicitation is released it will be synopsized in Contract Opportunities at https://sam.gov/. It is the potential offeror's responsibility to monitor this site for the release of any solicitation or synopsis.

Similar Contracts

Same NAICS industry code

NAICS: 236220
New
SLED
Checkpoint Security Grill Replacement - DBBThe Port of Seattle’s Aviation Project Management Group is seeking a contractor to deliver comprehensive design, permitting, and construction services for the replacement of the Checkpoint 5 security grill, with all work aligned to TSA CRPG Section 3-5 requirements. The scope encompasses a full lifecycle approach including site assessment, creation of detailed design drawings and technical specifications, submission for regulatory review and permit acquisition, removal and proper disposal of the existing structure, fabrication and installation of the new security grill, and seamless integration with existing structural, electrical, and badge access systems. The contractor must ensure strict compliance with federal guidelines while minimizing disruption to ongoing airport operations through careful coordination with all relevant stakeholders. The project is classified under NAICS code 236220 and is designated as a forecast opportunity with a posting date of July 25, 2026. Primary point of contact for inquiries is Yanet Maldonado, with Collette Deardorff serving as the Project Manager. All communications and submissions must be directed through the provided contact information, and the contractor will be expected to manage all aspects of the project in close collaboration with Port of Seattle personnel to maintain operational integrity and regulatory adherence throughout the duration of the work. The contract will be executed under a design-bid-build delivery method, and performance is expected to occur at the Port of Seattle facility, though specific location details are not disclosed in the posting.
Aviation Project Management Group

POSTED

about 1 hour ago

DEADLINE

N/A
View Details
NAICS: 236220
New
SLED
Rental Car Facility (RCF) Customer Service Building (CSB) Re-DemisingThe Port of Seattle’s Aviation Project Management Group is preparing to revise the Customer Service Building within the Rental Car Facility to support a new concession agreement and enable tenant construction beginning June 1, 2027. The scope includes significant interior and structural upgrades such as updating wayfinding signage to reflect new tenant layouts, constructing a new break room and flex space to support transit operations, and renovating existing restrooms in the Customer Service Building. Additional work involves replacing outdated car wash equipment in the Quick Turn Around areas, installing new expansion joints on the fifth-floor plaza, and performing structural repairs to address cracking and repair post-tensioned cables to ensure long-term integrity. These improvements are designed to modernize facilities, enhance operational efficiency, and align the building’s infrastructure with upcoming tenant requirements. The contract is forecasted under NAICS code 236220 for commercial and institutional building construction, with no specific set-aside designation indicated. Primary point of contact for inquiries is Angela Peterson, reachable via phone or email, with Julia Ruzon serving as the project manager. The solicitation was posted on July 25, 2026, and while no solicitation number is yet assigned, interested parties can find further details through the official Port of Seattle procurement portal. The work is critical to accommodating future concessions and ensuring the building complies with modern operational and safety standards ahead of the June 2027 tenant activation.
Aviation Project Management Group

POSTED

about 1 hour ago

DEADLINE

N/A
View Details
NAICS: 236220
New
SLED
212-July2026-Historic Selected Historic RenovationsThis contract solicitation is for prequalifying contractors to undertake historic repairs, replacements, and renovations on campus buildings that are at least 50 years old, ensuring all work adheres to the standards set by the Department of Historic Resources and the University’s Heritage Preservation Plan. The effort is focused on maintaining the historical integrity of the structures across Virginia State University’s campus, requiring specialized knowledge and experience in historic preservation practices. Contractors must demonstrate the capability to perform sensitive renovations while complying with state and institutional guidelines for heritage sites. The solicitation, titled 212-July2026-Historic Selected Historic Renovations and identified by number RFPQ-124991, was posted on July 24, 2026, with responses due by August 25, 2026. It is issued by Virginia State University under the SLED classification and applies campuswide within the Commonwealth of Virginia. Interested parties must submit their prequalification materials through the official vendor portal, and inquiries should be directed to Debra AC Sulla at the provided contact information. There is no set-aside designation for small or disadvantaged businesses, and the NAICS code is not specified, indicating the focus is on prequalification rather than immediate award.
Virginia State University

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 236220
New
SLED
Lewellyn Gym RenovationThe contract titled Lewellyn Gym Renovation seeks qualified contractors to undertake the comprehensive renovation of the primary gymnasium at the Virginia School for the Deaf and the Blind campus in Staunton, Virginia. The solicitation, issued under number IFB-124980 and posted on July 24, 2026, is open to vendors responding by the deadline of August 21, 2026, at 7:00 PM Eastern Time. This procurement is classified under the SLED category, indicating it is directed toward state, local, or educational government entities. The project involves upgrading the existing gymnasium infrastructure to meet modern safety, accessibility, and functional standards, ensuring it serves the unique needs of the school’s student population. All work must be performed on-site at the VSDB Campus in Staunton. Heather Miltenberger serves as the designated point of contact for this solicitation, reachable via email at heather.miltenberger@vsdbs.virginia.gov or by phone at 540-332-9050. Interested parties must submit their proposals through the official vendor portal accessible via the provided UI link. There is no set-aside designation specified, meaning all eligible contractors may compete without restrictions based on business size or ownership. The renovation scope is expected to include structural, mechanical, electrical, and accessibility improvements to the facility, though detailed specifications are outlined in the solicitation documents accessible through the vendor portal. Full compliance with applicable building codes and standards is required, and adherence to project timelines and quality benchmarks will be critical for contract award and performance.
Virginia School for the Deaf and the Blind

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 236220
New
SLED
Admin Office Atrium upgradesThe Akron Metropolitan Housing Authority is soliciting bids for administrative office atrium upgrades under solicitation number B26018, with proposals due by August 25, 2026. The work involves the design, installation, and commissioning of a Direct Digital Control building automation system under Division 23, requiring coordination with mechanical and electrical trades, compliance with ANSI/ASHRAE 135 (BACnet) and the International Mechanical Code, and adherence to specific performance metrics such as alarm annunciation within 45 seconds and PID loop execution at 1-second intervals. The contract is classified under NAICS code 236220 for commercial and institutional building construction and is being procured by a state-level agency in Ohio. All bidders must submit sealed hard-copy proposals via in-person or postal delivery; electronic submissions via email, fax, or online portals are prohibited. The solicitation emphasizes strict conformance to AMHA-supplied forms, with bids requiring the bidder’s name, signature, and complete inclusion of all requested documentation. The scope includes the delivery and installation of labeled equipment, piping, and ductwork conforming to ASME A13.1 standards with specific labeling materials such as 3-mil vinyl, thermal transfer-printed labels, and color-coded markings for safety and system identification. Approved manufacturers for labeling include Brady Corporation, Panduit, and HellermannTyton. Submittals must include shop drawings, wiring diagrams, samples, maintenance data, warranties, equipment label schedules, and operation and maintenance manuals. The contract imposes stringent labor requirements: the prime contractor must designate a project superintendent to be present on-site at all times, ensure daily personnel sign-in/out, and comply with overtime pay at 1.5 times the base rate under the Contract Work Hours and Safety Standards Act. All subcontracts, regardless of value, must include applicable labor standards and be submitted for approval 10 days before work begins. Contractors must also comply with Ohio’s Equal Employment Opportunity executive order, submit an affirmative action plan, and certify they have no conflicts of interest with AMHA personnel. The only explicitly stated financial figure is a $3,000 painting allowance, though the overall contract value is not otherwise detailed. Award will be made to the bidder deemed “lowest and best” at the sole discretion of AMHA, with no formal weighting or scoring system provided. Work must be performed at the Akron, Ohio site, with inspections conducted on-site by AMHA representatives prior to acceptance, and
Akron Metropolitan Housing Authority

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 236220
New
Federal
Valve Chamber ConstructionThe contract involves the construction of underground valve chambers equipped with drainage sumps to support the installation and operation of isolation and flow balancing valves, critical for maintaining optimal hydraulic conditions in water distribution or wastewater systems. The work is to be performed at a designated location in New Delhi with a postal code of 110021, under the oversight of the U.S. Embassy New Delhi within the Department of State, and is classified under NAICS code 236220 for nonresidential building construction. This subcontract opportunity requires proposers to adhere to all technical specifications for underground infrastructure including proper excavation, structural integrity, waterproofing, and integration with existing utility systems, all while meeting stringent compliance and safety protocols for the region. The solicitation was posted on July 24, 2026, and responses are due by August 11, 2026, at 8:30 AM, allowing approximately three weeks for preparation and submission. There is no specified set-aside classification, meaning the opportunity is open to all qualified contractors regardless of size or business type. The contract is not tied to a specific prime contractor, allowing eligible subcontractors to submit proposals directly through the SAM.gov portal. All work must be executed to meet the functional and durability requirements of a high-traffic diplomatic facility’s utility infrastructure, ensuring long-term reliability and ease of maintenance.
US Embassy New Delhi

POSTED

1 day ago

DEADLINE

in 17 days
View Details

More opportunities from Department Of Veterans Affairs → 247-NETWORK Contract Office 7 (36C247)

Same awarding agency

NAICS: 335313
New
Federal
J059--EMERGENCY LOW VOLTAGE (480) SOURCE SWITCHGEAR and AUTOMATIC TRANSFER SWITCH (ATS) AND THE UTILITY LOW VOLTAGE (480) SOURCE SWITCHGEAR AND ATSThe contract pertains to the procurement of emergency low voltage 480 source switchgear and automatic transfer switch equipment, alongside the corresponding utility low voltage 480 source switchgear and automatic transfer switch systems, intended to ensure uninterrupted power supply for critical operations. This solicitation is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside, meaning only eligible SDVOSB concerns may bid, and it is classified under NAICS code 335313 for electrical equipment manufacturing. The solicitation was posted on July 16, 2026, with a formal response deadline of July 27, 2026, at 5:00 a.m. Eastern Time, after which submissions will no longer be accepted. The contracting office is the 247-NETWORK Contract Office 7 under the Department of Veterans Affairs, located in Augusta, Georgia, with Marcus Watts serving as the primary point of contact as Contracting Officer, reachable via marcus.watts@va.gov. Performance location details are not specified, indicating potential flexibility or pending determination. All interested SDVOSB vendors must submit proposals through the SAM.gov portal before the deadline to be considered for award. The scope indicates a focus on reliable, code-compliant electrical infrastructure critical to maintaining operational continuity in VA facilities.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334111
New
Federal
3610--UV32MP Sign Flatbed Printer with Braille ModuleThe contract solicitation 36C24726Q0724 is a total small business set-aside under FAR 19.5 for the procurement of a UV32MP Sign Flatbed Printer with a Braille Module, classified under NAICS code 334111 and issued by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7 based in Augusta, GA. The requirement is for a single delivery to the Carl Vinson VA Medical Center in Dublin, Georgia, with delivery to be made within 90 days of order issuance under FOB Destination terms, meaning title and risk transfer upon delivery to the designated location. The solicitation seeks a complete system including the flatbed printer, ColorByte 11 design and rip software, Chromasphere UV/LED inks in multiple colors and varnish, a 12-month limited warranty, and a dedicated ADA/Braille module. All pricing is left blank for offerors to complete, and no estimated contract value is provided. The contract is evaluated under the Lowest Price Technically Acceptable (LPTA) methodology, where proposals must meet all technical requirements and be submitted in compliance with FAR Part 12 commercial item procedures using the SF-1449 form. Offerors must be certified as small businesses, provide a Unique Entity Identifier and CAGE code, and affirm compliance with cybersecurity prohibitions under FAR 52.240-91, FASCSA guidelines, and Section 889 of the NDAA, including reporting prohibited products within 72 hours of discovery. The contract incorporates deviation clauses addressing equal opportunity for workers with disabilities, diversity, equity, and inclusion compliance, and security prohibitions. Delivery and acceptance occur at the VA medical center, and the government retains final inspection and acceptance authority. Invoicing must be submitted electronically through the VA’s designated system within the VAAR 852.232-72 framework and payments will be processed via electronic funds transfer to the Department of Veterans Affairs Financial Services Center in Austin, Texas. Contractors are required to indemnify the government against intellectual property infringement claims and adhere to federal laws on contract work hours, kickbacks, and procurement integrity. The proposal must be submitted by July 31, 2026, at 3:00 p.m. CDT to the contracting officer in Dublin, GA, with questions due by July 28, 202
Electronic Computer Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
Federal
Quality Assurance and Compliance InspectionThe contract requires independent verification that installed doors comply with Department of Veterans Affairs safety, durability, and anti-ligature performance standards, with a specific focus on mock testing of attachment points to ensure structural integrity and security. This inspection is critical to confirm that all door systems meet rigorous federal requirements designed to protect vulnerable populations in VA facilities, particularly in behavioral health and detention settings where ligature risks must be mitigated. The work involves on-site evaluation, documentation of compliance, and reporting of any deviations or deficiencies that could compromise safety or regulatory adherence. This is a small business set-aside subcontract under NAICS code 541380, open only to wholly owned small businesses as defined by the SBA, with a response deadline of July 28, 2026, and performance centered in Decatur, Georgia, with a zip code of 30033. The contract is managed by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7, and it mandates that all verification activities be conducted by qualified third-party inspectors with demonstrated expertise in architectural hardware compliance and VA-specific protocols. There is no provision for alternative performance locations, and failure to meet the stated benchmarks will result in non-compliance and potential contract repercussions.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 541370
New
Federal
Site Assessment and Measurement ServicesThe contract calls for pre-installation site surveys to evaluate bathroom layouts and verify dimensional compatibility for the installation of new ligature-resistant doors, ensuring structural and safety requirements are met prior to procurement and installation. The work requires detailed assessment of existing configurations, with a focus on compliance with health and safety standards in facilities operated by the Department of Veterans Affairs, specifically targeting locations in Decatur, Georgia with ZIP code 30033. All services must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, and the North American Industry Classification System code 541370 applies to architectural and engineering services related to building inspection and assessment. The solicitation was posted on July 23, 2026, with proposals due by 4:00 PM on July 28, 2026, under the 247-NETWORK Contract Office 7. The work is classified as a subcontract and is administered by the Department of Veterans Affairs through its designated contract office. Although no point of contact is listed, all responses must be submitted via the SAM.gov portal using the provided link to ensure proper consideration. The nature of the work demands precision in measurement and familiarity with institutional building codes, particularly those governing safety-sensitive areas such as bathrooms in healthcare or correctional environments where ligature resistance is critical.
Surveying and Mapping (except Geophysical) Services

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332312
New
Federal
Manufacture of Ligature-Resistant Bathroom Shower DoorsThe contract calls for the design, fabrication, and supply of custom ligature-resistant shower doors specifically engineered to meet stringent behavioral health safety standards for use in Veterans Affairs medical facilities. These shower doors must be constructed to prevent self-harm or harm to others by eliminating potential anchor points, using non-removable hardware, and incorporating materials and finishes that withstand heavy use and intentional abuse, all while maintaining functionality and hygiene. The requirement is aligned with federal safety guidelines applicable to behavioral health environments to ensure patient dignity and staff safety. This is a total small business set-aside under the SBA program, meaning only small businesses qualify to bid, and the North American Industry Classification System code 332312 indicates the work falls under miscellaneous fabricated metal product manufacturing. The opportunity was posted on July 23, 2026, with a response deadline of July 28, 2026, and the place of performance is specified as Decatur, Georgia, with a zip code of 30033. The contract is issued under the 247-NETWORK Contract Office 7 (36C247) within the Department of Veterans Affairs, and all deliverables must comply with VA-specific installation, testing, and documentation requirements to ensure seamless integration into existing facility infrastructure.
Fabricated Structural Metal Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 238330
New
Federal
J083--BUILDING 143 DIETETICS FLOORING RENOVATIONS SERVICEThe Department of Veterans Affairs through its RPO-East NCO 7 in Tuscaloosa, Alabama, is preparing to award a firm-fixed price contract for the renovation of flooring in Building 143’s Dietetics Department at the Tuscaloosa VA Medical Center. The project requires the complete removal and replacement of the existing flooring system with a Sherwin-Williams Poly-Crete SLB seamless cementitious urethane flooring system, including a six-inch integral cove base, to enhance durability, sanitation, slip resistance, and ease of maintenance in food service areas. All work must be performed in strict coordination with Nutrition and Food Services staff to maintain operational continuity, requiring careful phasing, equipment relocation, and reconnection of commercial kitchen assets such as ovens, dishwashers, refrigeration units, and serving line equipment. The contractor must implement comprehensive infection control and dust mitigation measures, including negative air machines and containment systems, and ensure all relocated equipment is properly reinstalled and tested for operational integrity before final acceptance. This is a service-disabled veteran-owned small business (SDVOSB) set-aside with a NAICS code of 238330 and a small business size standard of $19 million. The contract has a performance period of 365 days from the Notice to Proceed and requires full compliance with VA security protocols, including mandatory OSHA 10 and 30 training for all personnel, negative TB testing, and registration in the VA’s TMS system with completion of VA Privacy and Information Security Awareness training. All employees must obtain VA identification badges and adhere strictly to VA regulations regarding parking, smoking, weapons, and photographic restrictions. Data handling and records retention are governed by NARA requirements, mandating the return or secure destruction of all VA information upon project completion, with certification submitted within 30 days. Proposals are not being accepted at this time; this is a presolicitation notice, and formal submissions will only be solicited once the official RFQ is posted. All interested parties must have active SAM and ORCA registrations. The contract officer for inquiries is Joseph E. Horn at Joseph.Horn@va.gov.
Flooring Contractors

POSTED

2 days ago

DEADLINE

in 23 days
View Details
NAICS: 332999
New
Federal
9999--Bathroom Shower Ligature-Resistant DoorsThe Department of Veterans Affairs is seeking small businesses to supply and install ligature-resistant bathroom and shower doors for the Atlanta VA Health Care System in Decatur, Georgia, under a total small business set-aside pursuant to FAR 19.5. The procurement, identified by solicitation number 36C24726Q0773, is being conducted under FAR Part 12 commercial item procedures, indicating a simplified acquisition process focused on commercially available products that meet healthcare safety standards for psychiatric environments. The NAICS code 332999 applies, with a small business size standard of 750 employees, and all offerors must be registered in SAM.gov with a valid Unique Entity ID and completed Representations and Certifications. The place of performance is clearly defined as 1670 Clairmont Road, Decatur, GA 30033, where the doors will be delivered and installed, with no indication of origin inspection or separate acceptance locations. While the full solicitation has not yet been issued, the government anticipates awarding based on technical acceptability and price, consistent with common LPTA practices under FAR Part 12, though the official basis of award has not been confirmed. The contract will require full labor, materials, equipment, and supplies for installation, with compliance implied to healthcare safety guidelines from the Facility Guidelines Institute and CMS, though specific technical standards are pending release. The pre-solicitation notice indicates that all submissions must be made electronically via SAM.gov by August 7, 2026, with the initial posting date of July 23, 2026, and response deadline of July 28, 2026, for the formal RFQ. No contract value, pricing details, payment office information, or invoicing method has been released at this stage, and no packaging, marking, inspection criteria, or evaluation factors are specified beyond the general requirement for commercial items to meet all necessary specifications. The point of contact for inquiries is Stanley Turner, Contract Specialist, reachable via email or phone, with no COR or COTR identified yet. The contracting office is located in Augusta, Georgia, but submissions are electronic only, and offerors must ensure SAM.gov registration and self-certification as a small business without the need for additional socioeconomic designations. No attachments, special clauses, security clearance requirements, or contract options have been published, and all detailed requirements—including technical specifications, delivery schedules, and acceptance criteria—are expected to be
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details