Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial
← Back to NAICS Codes
NAICS Code· 331318

Other Aluminum Rolling, Drawing, and Extruding

This U.S. industry comprises establishments primarily engaged in (1) rolling, drawing, or extruding shapes (except flat rolled sheet, plate, foil, and welded tube) from purchased aluminum and/or (2) recovering aluminum from scrap and rolling, drawing, or extruding shapes (except flat rolled sheet, plate, foil, and welded tube) in integrated mills. Illustrative Examples: Aluminum bar made by extruding purchased aluminum Nails, aluminum, made in wire drawing plants Structural shapes made by rolling purchased aluminum Rod made by extruding purchased aluminum Tube made by drawing or extruding purchased aluminum Wire, bare, made in aluminum wire drawing plants Cross-References. Establishments primarily engaged in--Show more

NAICS 331318 – Other Aluminum Rolling, Drawing, and Extruding covers the manufacturing of semi-finished and finished aluminum products through mechanical deformation processes such as rolling, drawing, and extrusion, excluding those classified under primary aluminum production or specialized aerospace extrusions. This sector produces aluminum shapes, bars, rods, tubes, and profiles used in structural, thermal, and electromagnetic applications across defense, aerospace, transportation, and energy infrastructure.

21
Active Contracts
$10.2M
Total Obligations (12mo)
671
Awarded Contracts (12mo)
149
Contractors Awarded (12mo)
-46.4%
YoY Growth

Contract Opportunities

Active solicitations and awarded contracts classified under NAICS 331318 — Other Aluminum Rolling, Drawing, and Extruding.

Dotted
NAICS 331318 FAQ

Frequently Asked Questions

NAICS code 331318 covers Other Aluminum Rolling, Drawing, and Extruding. This U.S. industry comprises establishments primarily engaged in (1) rolling, drawing, or extruding shapes (except flat rolled sheet, plate, foil, and welded tube) from purchased aluminum and/or (2) recovering aluminum from scrap and rolling, drawing, or extruding shapes (except flat rolled sheet, plate, foil, and welded tube) in integrated mills. Illustrative Examples: Aluminum bar made by extruding purchased aluminum Nails, aluminum, made in wire drawing plants Structural shapes made by rolling purchased aluminum Rod made by extruding purchased aluminum Tube made by drawing or extruding purchased aluminum Wire, bare, made in aluminum wire drawing plants Cross-References. Establishments primarily engaged in--

Recently Posted in Other Aluminum Rolling, Drawing, and Extruding

NAICS: 331318
New
DIBBS
ANGLE, STRUCTURALThe contract specifies the procurement of structural aluminum alloy angles made from AMS-QQ-A-200/11, Alloy 7075, with a length of 10 to 12 feet in even-foot increments, a width of 2.500 inches, and a flange thickness of 0.188 inches, weighing 1.08 pounds per foot. The material must comply with multiple technical standards including SAE AMS-QQ-A-200C, AMS10133B, ASTM B666/B666M-20, and AMS2809B, and must be supplied with full metal certification per CDRL-METALSCERT as defined in the DLA Master List of Technical and Quality Requirements. Continuous identification markings are mandatory on each unit, requiring the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer name, heat and lot number, and dimensions to be clearly stenciled or stamped in legible, waterproof, non-contaminating characters visible to the unaided eye; adhesive labels are required for small-diameter bars. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any non-compliance constitutes an unauthorized substitution with potential criminal penalties. The item is designated a critical application item, and all packaging must follow MIL-STD-2073-1E and DLA packaging requirements, including preservation per ASTM A700 and marking per MIL-STD-129, with shipment quantities in both linear feet and pounds clearly indicated. Delivery is due within 30 days after award, with firm fixed pricing and zero variance allowed, and inspection and acceptance occur at destination FOB origin. The NSN is 9540-00-580-6245 for a total quantity of 31 feet, with the government’s material need date set for October 26, 2026.
DEPOT OKLAHOMA

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 331318
New
DIBBS
SPRINGThis contract under the title SPRING, with solicitation number SPE7L1-26-T-822W, is a federal procurement initiative managed by the Department of Defense’s Land Supply Chain agency. It seeks one unit of an item identified by NSN 5360-01-166-5523, with a required delivery within 168 days after order placement. The solicitation was posted on July 9, 2026, and responses are due by July 20, 2026. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones unless amended. Compliance includes the mandatory removal of government identification from any non-accepted supplies. The place of performance is set in Phoenix, Arizona, 85043, with Kelly Day of DLA serving as the primary point of contact, reachable by phone and email. The NAICS code 331318 indicates the nature of the industry involved, and the procurement is classified as federal without any set-aside restrictions.
LAND SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
DIBBS
SPRING, HELICAL, COMPRESThis contract is for the procurement of 38 helical compression springs identified by NSN 5360-01-247-9620, with a delivery requirement within 168 days after award. The solicitation number is SPE7L1-26-T-814N, issued by the Department of Defense through the Land Supply Chain under the NAICS code 331318, and responses are due by July 20, 2026. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Compliance with MIL-STD-130N for identification marking of U.S. military property is required, and the supplier must ensure no intentional addition of mercury or mercury-containing compounds to any supplied hardware, except for specific exempted applications such as batteries, fluorescent lights, sensors, weapon systems, or reagents specified by NAVSEA. Mercury-containing portable lamps and instruments must be shock-proof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The contracting office is located in Phoenix, Arizona, with Kelly Day as the primary point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 331318
Closed
DIBBS
CABLE, POWER, ELECTRICALThis contract specifies the procurement of 11,250 feet of continuous-length electrical power cable under solicitation SPE7M1-26-T-177X, with delivery required within 75 days to Robins Air Force Base, Georgia. The cable must comply with UL 62 standards as revised in 2014 and 2018, identified by part number UL62SO6BCK3/12EPCPE, and adhere to MIL-DTL-12000 for preservation and packaging. Only continuous lengths are acceptable based on the advice code, with multiple unit packs prohibited unless otherwise specified; packaging must follow MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization must meet DLA packaging standards. The item is classified as a critical application, with strict prohibitions against intentional addition of mercury or mercury-containing compounds, except for exempted functional uses such as batteries, fluorescent lamps, sensors, weapon systems, and specified reagents, which must include a secondary containment if portable. Quality and technical requirements are referenced from the DLA Master List, and deviations require formal engineering change proposals or variance requests. The contract allows for a five percent quantity variance, with inspection and acceptance occurring at destination, and the unit of issue is feet. The delivery is FOB origin, with preservation methods, wrapping, and cushioning materials designated as unspecified. The item is to be shipped to DLA Distribution Warner Robins and must be delivered no later than May 1, 2026, despite the original required date being January 16, 2027. Full and open competition applies, and all communications and submissions are governed by DLA procurement guidelines and transportation procedures.
MARITIME SUPPLY CHAIN

POSTED

5 days ago

CLOSED

about 8 hours ago
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICALThe contract solicitation is for 1,500 feet of electrical wire, specified as a single continuous length on a 500-foot spool, with the NSN part number 6145-00-689-7447. The purchase request number is 7017439764, and delivery must be completed within 168 days after order. Full and open competition is authorized, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with compliance determined by the revision in effect on the solicitation issue date or award date depending on acquisition size. Government identification must be removed from all non-accepted supplies in accordance with RQ011. The solicitation number is SPE7M1-26-T-203N, issued on July 9, 2026, with responses due by July 20, 2026. The acquiring agency is the Department of Defense through the Maritime Supply Chain, with performance required in Jacksonville, Florida, 32212-0103. Primary point of contact is Alisha Blanton, reachable via email or phone as listed, and the solicitation is accessible through the DIBBS portal. The NAICS code is 331318, confirming the classification under wiring and wiring device manufacturing.
MARITIME SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICALThis contract specifies the procurement of electrical wire under NSN 6145-00-107-7913, with a total quantity of 51,500 feet divided across three line items of 2,000 feet, 13,000 feet, and 36,500 feet respectively. The wire must comply with SAE AS81044/12 Revision A dated December 1, 2011, and all packaging, preservation, and marking must adhere to MIL-STD-2073-1E, MIL-DTL-12000, and MIL-STD-129 standards. The material must be supplied in 500-foot spools, with packaging and preservation strictly prohibiting mercury or mercury-containing compounds in any form, including preservation, packaging, and marking materials, except as explicitly allowed for functional components like batteries or instruments specified by NAVSEA, which must include secondary containment. The contract requires full and open competition and applies the Qualified Products List or Qualified Manufacturers List since the NSN is designated as primary. Delivery is FOB origin with a 69-day delivery window and a 5% quantity variance allowance; inspection and acceptance occur at the destination. Packaging must be palletized per DLA requirements and marked according to MIL-STD-129 with special codes if applicable. Shipments are directed to three DLA distribution centers in Oklahoma, California, and Pennsylvania, with specific freight and parcel post addresses provided for each. The original required delivery date is December 1, 2026, with need ship dates ranging from July 2026 to July 2028. The contract falls under NAICS code 331318 and was issued by the Department of Defense Maritime Supply Chain under solicitation SPE7M1-26-T-204P.
MARITIME SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
DIBBS
CLAMP, BLOCK, SECTIONThe contract pertains to the procurement of 19 units of CLAMP, BLOCK, SECTION with NSN 5340-01-483-3923 under solicitation SPE7L1-26-T-810W, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 168 days of award, and full and open competition applies without any set-aside restrictions. The technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is subject to stringent cybersecurity compliance, requiring the contractor to be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. Additionally, the product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly permitted by the specification. Technical data associated with this item is subject to stringent export controls under ITAR or EAR, restricting access to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and verified authorization through DLA. All handling of export-controlled data must comply with DFARS 252.225-7048, and disclosure to foreign persons—even within the U.S.—is prohibited without authorization. Government identification must be removed from any non-accepted supplies prior to disposal or return. The point of contact for inquiries is Michael Nordahl at dlaflbc2prs@dla.mil, and responses are due by July 20, 2026.
LAND SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
DIBBS
SPRING, HELICAL, COMPRESThis contract specifies the procurement of 10 helical compression springs identified by NSN 5360-00-137-8205 and part number 101A751EYP1, manufactured to meet the current revision of ASTM A228/A228M and SAE AMS-QQ-N-290D standards, with past revisions still acceptable for previously produced items. The springs must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and all hardware furnished must adhere to the current standard as of the solicitation date. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking except for specified functional uses in batteries, instruments, or weapon systems under strict containment requirements per NAVSEA 5100-003D. The contract mandates packaging and marking in full compliance with MIL-STD-2073-1E and MIL-STD-129, using preservation method 10 and unit container A1, with no special marking required. Palletization follows DLA packaging guidelines, and delivery is FOB origin with a strict 100% quantity variance allowance. The delivery deadline is 168 days from contract award, with the required ship date set for January 5, 2027. Inspection and acceptance occur at the destination, and the item is to be delivered to Industries of the Blind Inc in Greensboro, NC. The solicitation was issued under DLA’s full and open competition policy with no set-aside, and all data aligns with DoD unit of issue standards. The primary point of contact is Kelly Day of the Department of Defense’s Land Supply Chain, and the contract is governed by DLA procedural notes C19 and C20 regarding transportation logistics.
LAND SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICALThis contract specifies the procurement of 3,000 feet of electrical wire in continuous length, identified by NSN 6145-00-914-9010 and part number A-A-59609, with a required revision level aligned to CID A-A-59609. The wire must be supplied in 1,000-foot reels with no multiple unit packs allowed if the advice code is 2N, 28, or 34; if the code is 2P or 39, multiple unit packs are acceptable, with the advice code superseding any conflicting schedule instructions. Strict prohibitions against intentional addition or direct contact of mercury or mercury-containing compounds apply, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents by NAVSEA, with portable fluorescent lamps and instruments requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and MIL-DTL-12000 for preservation, with marking per MIL-STD-129 and palletization per DLA packaging requirements. Delivery is FOB origin, with a 92-day delivery window and a 5% quantity tolerance; inspection and acceptance occur at destination. The contract requires full and open competition and references the DLA Master List of Technical and Quality Requirements for compliance. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of October 21, 2026, and original delivery due by December 30, 2026. Point of contact is Alisha Blanton at DLA, with solicitation issued under SPE7M1-26-T-192T, response deadline July 20, 2026, and posted July 9, 2026.
MARITIME SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
DIBBS
SPRING, FUEL CONTROLThis contract pertains to the procurement of a Spring, Fuel Control item identified by NSN 5360-00-918-8909 and part number 541982, supplied by ONTIC ENGINEERING & MANUFACTURING, INC, under solicitation SPE7LX-26-U-8747. The item is classified as a restricted source requiring government engineering source approval and is designated as a critical application item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization adhering to specified DLA standards. The item has no shelf life and does not require Unique Item Identification per the service customer’s request. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attribute verification levels are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. The contract mandates compliance with CMMC Level 2 Self-Assessment for cybersecurity and enforces configuration change management through formal engineering change proposals and variance requests. Delivery is FOB origin with a 111-day lead time, quantity fixed at 11 units with no variance allowed, and inspection and acceptance occur at destination. The unit of issue is each, with price set at $11.00 per unit, totaling $121.00, and this is a DLA Direct, CONUS procurement. All contractual obligations are subject to the DLA Master List revision in effect at the solicitation issue date.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

5 days ago

DEADLINE

in 10 days
View Details
NAICS: 331318
New
DIBBS
PARTS KIT, REEL ASSEThe contract is for a Parts Kit, Reel Assembly, Hose with NSN 4930-01-567-5410, quantity of 37 units, under solicitation SPE8EE-26-T-2101, with a response deadline of July 20, 2026, and delivery required within 13 days after award. The procurement is managed by the Department of Defense through the Construction & Equipment Manu & Con agency, with performance located in Tracy, California, 95304-5000, and primary point of contact is William Schenck via email and phone. The solicitation is governed by DLA Packaging Requirements for Procurement and incorporates all technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware or materials, except for specific functional uses such as batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier for mercury as mandated by NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
Federal
53--SPRING,FUEL CONTROLThe solicitation seeks quotes for 11 fuel control springs with NSN 5360009188909 under contract number SPE7LX26U8747, with a response deadline of July 24, 2026. This is an RFQ issued by the Defense Logistics Agency Land and Maritime, and only electronic submissions are accepted; hard copies are not available. The award may result in an indefinite delivery contract with a one-year term or until aggregate orders reach $350,000, whichever comes first, with an estimated four orders annually and a guaranteed minimum of one unit. Items will be delivered to multiple CONUS and OCONUS DLA depots via consolidated and containerized shipping methods. The approved source for this item is 45934 541982, and no specifications, plans, or drawings are provided. Any responsible supplier may submit a quote, and all responses must be received electronically before the deadline. Questions should be directed to the designated buyer via email, with solicitation details accessible through the provided SAM.gov link. The NAICS code is 331318, and the office is located in Columbus, Ohio.
DLA Land And Maritime

POSTED

6 days ago

DEADLINE

in 9 days
View Details

Win Contracts in Other Aluminum Rolling, Drawing, and Extruding

Get AI-powered intelligence on NAICS 331318 procurement

Real-time contract opportunities for NAICS 331318 (Other Aluminum Rolling, Drawing, and Extruding)

AI-powered matching based on your business capabilities and past performance

Competitive analysis of contractors winning awards in this industry

Automated alerts when new opportunities are posted

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS