Adrienne Rubinic

SNGL BOARD COMPUTER — 7021015990886 — SPRMM127QGA25

Solicitation SPRMM1-27-Q-GA25, issued by DLA Mechanicsburg, seeks the manufacture of a Single Board Computer (CLIN 0001, NIIN 015990886) based on the design represented by Cage Code 06401 reference number 67207-03. The requirement specifies that the item must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073. Inspection and final acceptance will occur at the contractor's or subcontractor's plant, with the contractor maintaining responsibility for all quality assurance and inspection records for 365 days following final delivery. Offerors must be registered in the System for Award Management (SAM) and provide an email address for communications. If the offeror is not the original equipment manufacturer, they must disclose the OEM's CAGE code and part number. The procurement prohibits the use of additive manufacturing unless authorized and requires the submission of Safety Data Sheets and GHS compliant labels for any hazardous materials. Payment and receiving reports must be processed electronically via Wide Area Workflow (WAWF). The contract incorporates critical cybersecurity requirements under DFARS 252.204-7012 for safeguarding covered defense information and mandates compliance with the Federal Acquisition Supply Chain Security Act.

Department Of The NavyMECHANICSBURG, PA, 17055-0788, USA

NAICS

334111

Electronic Computer Manufacturing

PSC

3571

Service and Trade Equipment

Posted Oct 22, 2026

SPRMM127QGA25

7d left

FederalNEW1

This solicitation, issued by DLA Mechanicsburg under SEPA-EAF Authority, seeks the manufacture of a Removable Pump Casi (NIIN 017013172). The government intends to make a single award to a responsible, technically acceptable offeror based on the most advantageous terms, with a strong emphasis on past performance over price. Evaluation will utilize the DoD Supplier Performance Risk System (SPRS) to assess quality, price, and supplier risk. Offerors who are not the original equipment manufacturer must provide the OEM's CAGE code and part number. The contract requires a quality system compliant with ISO 9001 and mandates that all items be mercury-free, as they are intended for use on submarines or surface ships. Logistics and administration are managed through the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Delivery is required as soon as possible (ASAP) with FOB Destination terms. Packaging and marking must adhere to MIL-STD-2073 and MIL-STD-129, and the item must be physically identified per Item Unique Identification (IUI) requirements. Inspection and acceptance will occur at the origin, specifically at the contractor's or subcontractor's plant. The solicitation also includes strict cybersecurity requirements per DFARS 252.204-7012 and requires the submission of Safety Data Sheets (SDS) for any hazardous materials prior to award.

Department Of DefensePA, USA

NAICS

333914

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

PSC

4320

Pumps and Compressors

Posted Oct 20, 2026

SPRMM126QGG73

4d left

FederalNEW1

This solicitation, issued by DLA Mechanicsburg under SEPA-EAF Authority, seeks quotes for the manufacture and delivery of a Single Board Computer (NIIN: 015990886). The requirement specifies that the item must be physically identified according to MIL-STD-130 and packaged in accordance with MIL-STD-2073-1, with specific ESD protection requirements per ANSI/ESD S20.20-2021. Inspection and acceptance will occur at the origin, specifically at the contractor's or subcontractor's plant. The government requires the contractor to maintain inspection records for 365 days after final delivery and supply chain traceability documentation for ten years after final payment. Offerors must provide the CAGE code and part number of the Original Equipment Manufacturer (OEM) and, if acting as a distributor, provide proof of authorization on company letterhead. Quotes must be submitted via the PIEE-WAWF system for invoicing and receiving reports. The solicitation prohibits the use of additive manufacturing for the award and mandates compliance with the Federal Acquisition Supply Chain Security Act and cybersecurity maturity model certification levels. All hazardous materials must be documented with Safety Data Sheets and GHS-compliant labels submitted prior to award. Delivery is requested as soon as possible, and quotes should remain valid for 90 days.

Department Of DefensePA, USA

NAICS

334111

Electronic Computer Manufacturing

PSC

7B22

Posted Oct 20, 2026

SPRMM126QGG65

9d left

FederalNEW1

This solicitation, issued by DLA Mechanicsburg under SEPA-EAF authority, is a Total Small Business Set-Aside for the manufacture and delivery of one globe valve. The item must conform to the design represented by Cage Code IM994, reference number 253342(ASSY98), and be provided as new, unissued material. The contract is a fixed-price requirement with a total value of 26.77 dollars, specifying delivery as ASAP with FOB Destination terms. Inspection and acceptance are both conducted at the origin. Key technical requirements include physical identification per MIL-STD-130 and packaging in accordance with MIL-STD-2073-1 for military distribution or ASTM D3951-18 for certain domestic shipments. The government explicitly prohibits the use of additive manufacturing processes for this item. Offerors who are not the original equipment manufacturer must provide the OEM's CAGE code and part number. Administrative requirements include the mandatory use of the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports, and the Workflow Pro (WFP) Mod Assist module for any contract modifications.

Department Of DefensePA, USA

NAICS

332919

Other Metal Valve and Pipe Fitting Manufacturing

PSC

4820

Valves

Posted Oct 20, 2026

total small business set-asideSPRMM126QGG72

4d left

FederalNEW1

CONTROLLER,HMI — 5998016760453 — SPRMM126QGG71

This solicitation, issued by NAVSUP Weapons Systems Support (SPRMM1 DLA Mechanicsburg), seeks the manufacture and provision of an HMI Controller (NIIN 016760453) based on TDP Version 003 and the design represented by Cage Code 23822, reference number SD012200-71191-4. Award consideration is strictly limited to the original manufacturer or authorized distributors, who must provide proof of authorization on signed company letterhead. The contract mandates strict adherence to physical identification standards per MIL-STD-130 Rev N and packaging requirements according to MIL-STD-2073, with specific packing levels defined for domestic and overseas shipments. The contractor is responsible for all inspection and quality assurance at the point of origin, though the government reserves the right to perform independent inspections. Key administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment. Compliance with cybersecurity standards is required under DFARS 252.204-7012 for safeguarding covered defense information. Additionally, any hazardous materials delivered must be accompanied by GHS-compliant labels and Safety Data Sheets submitted to NAVSUPWSS Code N242. All substitutions or design changes, except for simple part number updates, require written approval from the NAVICP-MECH Contracting Officer.

Department Of The NavyMECHANICSBURG, PA, 17055-0788, USA

NAICS

334519

Other Measuring and Controlling Device Manufacturing

PSC

3672

Special Industry Machinery

Posted Oct 20, 2026

SPRMM126QGG71

4d left

FederalNEW1

CIRCUIT CARD ASSEMB — 5998200046287 — SPRMM127QGA09

This solicitation, number SPRMM1-27-Q-GA09, is a Request for Quotations issued by DLA Mechanicsburg for the manufacture and supply of a Circuit Card Assembly, identified by NIIN 200046287. The procurement is restricted to approved sources, including Original Component Manufacturers, Original Equipment Manufacturers, or authorized distributors who can provide full supply chain traceability. Items must be delivered as soon as possible to the receiving officer on the USS Theodore Roosevelt CVN 71. The government prohibits the procurement of these items if they are manufactured, assembled, or delivered from a covered nation. The contract mandates strict adherence to quality and marking standards, requiring physical identification per MIL-STD-130 and packaging in accordance with MIL-STD-2073. Inspection and acceptance will occur at the origin, with the contractor holding primary responsibility for quality assurance. Key regulatory requirements include DFARS 252.204-7012 for safeguarding covered defense information and FAR 52.223-3 for hazardous material identification. Invoicing and payment must be processed electronically through the Wide Area Workflow system. Offerors must provide specific OEM details, CAGE codes, and part numbers to be considered for award.

Department Of The NavyMECHANICSBURG, PA, 17055-0788, USA

NAICS

334418

Printed Circuit Assembly (Electronic Assembly) Manufacturing

PSC

3672

Special Industry Machinery

Posted Oct 20, 2026

SPRMM127QGA09

4d left

Federal1

CHASSIS,ELECTRICAL — 5975015331509 — SPRMM126QGG61

Solicitation SPRMM1-26-Q-GG61 is a Total Small Business Set-Aside issued by DLA Mechanicsburg for the manufacture and procurement of one electrical chassis, identified by NSN 5975-01-533-1509 and design reference OKPC5 CCHA41964-1. The item is intended for the USS Chief MCM 14, with delivery requested as soon as possible. The contractor must adhere to TDP version 003 and ensure the product is new, unissued, and conforms to the specified design. Any changes in design, material, or part numbers require written approval from the NAVICP-MECH Contracting Officer, except for simple part number changes. The contract mandates strict quality and packaging standards, requiring physical identification per MIL-STD-130 and packaging in accordance with MIL-STD-2073-1 and MIL-STD-129. The contractor is responsible for all inspection requirements, though the government reserves the right to perform its own inspections. Invoicing must be processed through the Wide Area Workflow system. Additionally, offerors must provide CMMC unique identifiers and, if acting as a distributor, provide signed proof of authorization on company letterhead. All hazardous materials must be accompanied by GHS compliant labels and Safety Data Sheets submitted to NAVSUP WSS Code N242.

Department Of The NavyMECHANICSBURG, PA, 17055-0788, USA

NAICS

335999

All Other Miscellaneous Electrical Equipment and Component Manufacturing

PSC

3644

Special Industry Machinery

Posted Sep 18, 2026

Total Small Business Set-AsideSPRMM126QGG61

Closed

Federal1

SERVER — 7050016798028 — SPRMM126QGG63

This small business set-aside solicitation, issued by DLA Mechanicsburg for the Department of the Navy, requires the manufacture and procurement of a server, identified by NSN 7050-01-679-8028. The procurement is urgent due to a CASREP, with delivery requested as soon as possible for the USS TORTUGA (LSD 46). The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation will include risk assessments via the Supplier Performance Risk System regarding item, price, and supplier risk. The contractor is responsible for all inspection and quality assurance at the origin, with records maintained for 365 days post-delivery. Physical identification must comply with MIL-STD-130, and packaging must adhere to MIL-STD-2073 and MIL-STD-129, including specific DLR labeling requirements for applicable items. Invoicing must be processed electronically through the Wide Area Workflow system. The contract incorporates strict cybersecurity standards under DFARS 252.204-7012 and requires compliance with Buy American and Balance of Payments programs. Offerors who are not the original equipment manufacturer must disclose the OEM identity to be considered for award.

Department Of The NavyMECHANICSBURG, PA, 17055-0788, USA

NAICS

334111

Electronic Computer Manufacturing

PSC

3571

Service and Trade Equipment

Posted Sep 18, 2026

Small BusinessSPRMM126QGG63

Closed

Federal1

Solicitation SPRMM1-26-Q-GB74, issued by DLA Mechanicsburg, is a request for quotations for the manufacture and procurement of control panels and control panel assemblies. The requirement is designated as a Total Small Business Set-Aside for NIIN 016691573, while NIIN 016414459 has been removed from the requirement. The procurement follows the Lowest Price Technically Acceptable (LPTA) evaluation criteria, where the award is granted to the responsible offeror providing the lowest price among those meeting all technical specifications. The current offer due date has been extended to September 30, 2026. Key contractual requirements include strict adherence to MIL-STD-130 for physical identification and MIL-STD-2073 for preservation, packaging, and marking. All items must be furnished according to specific Cage Code reference designs, and contractors who are not the original equipment manufacturer must identify the OEM and their associated CAGE code. Inspection and acceptance are conducted at the origin, and the contractor is required to maintain all inspection records for 365 days following final delivery. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Additional compliance mandates include the Federal Acquisition Supply Chain Security Act prohibitions and specific deviations regarding DEI discrimination by federal contractors.

Department Of DefensePA,

NAICS

334412

Bare Printed Circuit Board Manufacturing

PSC

5998

Electrical and Electronic Equipment Components

Posted Sep 4, 2026

sbSPRMM126QGB74

Closed

Federal2

This contract pertains to the procurement of a CONTROL MODULE under solicitation number SPRMM126QGD81, issued by the Defense Logistics Agency (DLA) Mechanicsburg, with a response deadline of June 12, 2026. The requirement mandates strict adherence to military standards including MIL-STD-130 Rev N for marking, and MIL-STD-2073 for packaging, with all materials required to originate from the specified CAGE code 53711 and reference number 8501286-1. Contractors must be authorized distributors of the original equipment manufacturer and must provide proof of authorization with their offer. All deliveries must be accompanied by electronic submission of the Invoice and Receiving Report (COMBO) through the Wide Area Workflow system, and contractors are required to register for the Procurement Integrated Enterprise Environment to access order data. Design, material, or part number changes are strictly regulated and require written approval from the NAVICP-MECH Contracting Officer, with changes categorized under defined code systems and subject to administrative cost deductions unless approved. The contract enforces comprehensive quality assurance provisions, placing full responsibility on the contractor to conduct all inspections and maintain detailed records for at least 365 days post-delivery. Government inspections are reserved as a right to verify compliance, and submission of defective material is prohibited regardless of sampling outcomes. Packaging and preservation must conform to specified military standards, and any changes to production facilities require formal approval and a minimum $250 price reduction to offset administrative processing. Contractors must comply with security restrictions and data distribution controls, including adherence to NOFORN and other classification protocols for technical documents. The solicitation also mandates inclusion of mandatory representations for small business participation and annual certifications, while prohibiting unauthorized substitutions and enforcing electronic communication protocols for all order-related exchanges, including email notifications and electronic data interchange requirements. All documentation referenced in the contract must be obtained through official DOD sources, with specific ordering instructions provided for various military specifications and technical manuals.

Department Of DefensePA,

NAICS

334412

Bare Printed Circuit Board Manufacturing

PSC

5998

Electrical and Electronic Equipment Components

Posted Aug 7, 2026

small businessSPRMM126QGD81

Closed