Alana M Boyer

SCREW,CAP,SOCKET HE — 5305013869824 — N0010427QFA05

This solicitation, issued by NAVSUP Weapon Systems Support, is for the procurement of socket head cap screws (NSN 5305-01-386-9824) designated as Special Emphasis Level I material. Due to their use in crucial shipboard systems where failure could result in catastrophic loss of life or vessel, these components are subject to stringent quality assurance and traceability requirements. The contractor must adhere to a rigorous quality system, such as ISO-9001 or MIL-I-45208, and maintain absolute traceability from raw material heat lots to the final product. Key technical requirements include quantitative chemical and mechanical analysis of SAE-AMS-5643 material, liquid penetrant inspection, and mandatory wedge tensile testing for each production lot. The contract mandates a zero-defect acceptance policy for final inspection and requires the submission of comprehensive certification data and a Certificate of Compliance via Wide Area WorkFlow (WAWF) for review by the Portsmouth Naval Shipyard prior to shipment. Government Quality Assurance will be performed at the source through the Defense Contract Management Agency. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Deliveries are required within 365 days of the contract effective date on an FOB Destination basis, with specific packaging standards per MIL-STD-2073 and marking requirements per MIL-STD-129.

Department Of The NavyMECHANICSBURG, PA, 17050-2411, USA

NAICS

332722

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

PSC

3452

Metalworking Machinery

Posted Oct 22, 2026

N0010427QFA05

7d left

Federal3

Solicitation N0010426QFB59, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of Fluid Valve Stems (NSN 4820-01-314-4040). The material is designated as Special Emphasis Level I, as it is used in critical shipboard systems where failure could lead to catastrophic loss of life or vessel. The requirement is for 15 units, with a delivery timeline of 365 days after the effective date of the contract. This is a DO-rated order for national defense use, and the award will be based on the most advantageous proposal, with past performance weighted as more important than price. Technical requirements specify the use of QQ-N-286 material, prohibiting weld repairs and requiring quantitative chemical and mechanical analysis, as well as ultrasonic inspection for starting materials 4 inches or greater in diameter. The contractor must maintain an ISO-9001 compliant quality system and provide a Certificate of Compliance and test certifications via Wide Area Workflow (WAWF) prior to shipment. Inspection and acceptance occur at the origin, with a zero-defect lot acceptance policy. Packaging must adhere to MIL-STD-2073-1 and MIL-STD-129 standards, and the contract includes strict configuration control and mercury-free requirements.

Department Of DefensePA, USA

NAICS

332919

Other Metal Valve and Pipe Fitting Manufacturing

PSC

4820

Valves

Posted Oct 21, 2026

N0010426QFB59

Due today

Federal3

SCREW,CAP,SOCKET HE — 5305013255214 — N0010426QFG05

This contract is for the procurement of socket head cap screws designated as Special Emphasis material, meaning they are critical components for shipboard systems where failure could lead to serious injury, loss of life, or loss of the vessel. The items must be manufactured in accordance with FF-S-86 and QQ-N-286, specifically requiring materials to be annealed and age hardened. Due to the critical nature of these parts, the contract mandates rigorous quality assurance, including liquid penetrant and ultrasonic inspections, wedge tensile testing, and strict adherence to ISO-9001, ISO-10012, and ISO/IEC 17025 standards. Full traceability from the starting material to the finished product is required, and the contractor must provide a detailed certificate of compliance and test reports via the Wide Area Workflow system. The solicitation is a total small business set-aside with a delivery period of 365 days and shipping terms set as FOB Destination. Award is based on a single-award selection where past performance is weighted more heavily than price. Government Quality Assurance is performed at the source, and the contractor is responsible for maintaining a documented quality system subject to government audit. Additionally, the contract prohibits the intentional use of mercury and requires compliance with the Buy American and Balance of Payments Program. All engineering changes must be submitted as Engineering Change Proposals, and any waivers or deviations require formal approval from the Contracting Officer.

Department Of The NavyMECHANICSBURG, PA, 17050-2411, USA

NAICS

332722

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

PSC

3452

Metalworking Machinery

Posted Oct 15, 2026

Total Small Business Set-AsideN0010426QFG05

No deadline

Federal4

PARTS KIT,SEDIMENT — 4820015448901 — N0010426QFB74

This contract is a solicitation issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of Sediment Parts Kits (NSN 4820-01-544-8901). The material is designated as Special Emphasis Level I, meaning it is used in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. Due to this critical safety designation, the contract mandates strict quality assurance and traceability requirements, including the use of a documented quality system compliant with ISO-9001 or MIL-I-45208. The technical requirements specify that studs must be manufactured from ASTM-A193 Grade B16 material and undergo either Liquid Penetrant or Magnetic Particle Inspection. The contractor must maintain total equipment baseline configuration and provide comprehensive objective quality evidence, including quantitative chemical and mechanical analysis. All certification data and certificates of compliance must be submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Packaging and marking must adhere to MIL-STD-2073, MIL-STD-129, and MIL-STD-130 standards. Award will be made to a single, technically acceptable offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price.

Department Of The NavyMECHANICSBURG, PA, 17050-2411, USA$17 est.

NAICS

332919

Other Metal Valve and Pipe Fitting Manufacturing

PSC

3491

Metalworking Machinery

Posted Oct 15, 2026

N0010426QFB74

Due today

Federal2

NUT, HEX, HEAVY — 5310016314194 — N0010426QFG22

Solicitation NO0014-26-Q-FG22, issued by NAVSUP Weapon Systems Support, is a request for quotations for the procurement of Heavy Hex Nuts (NSNs 5310-01-631-4194, 5310-01-631-4234, and 5310-01-632-6313). These components are designated as Special Emphasis material (Level I, Scope of Certification, or Quality Assured) because they are used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. Consequently, the contract mandates rigorous quality control, including strict material traceability from raw stock to finished part, quantitative chemical and mechanical analysis per ASTM-A194, and specific thread inspection requirements following the FED-STD-H28 series. The contractor must maintain a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, or acceptable military alternatives. Key deliverables include the hardware, one additional fastener per heat/lot for testing, and a comprehensive certificate of compliance. All certification data must be submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. The government will perform production lot destructive testing, and inspection and acceptance will occur at the origin. Award will be based on the most advantageous value, with past performance weighted as more important than price.

Department Of The NavyMECHANICSBURG, PA, 17050-2411, USA

NAICS

332722

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

PSC

3452

Metalworking Machinery

Posted Oct 15, 2026

N0010426QFG22

6d left

Federal5

NUT,PLAIN,ROUND — 5310013397780 — N0010426QFF34

This solicitation, issued by NAVSUP Weapon Systems Support, is for the procurement of plain round nuts (NIINs 013397780 and 013397781) designated as Special Emphasis material. Because these components are used in crucial shipboard systems where failure could result in loss of life or the vessel, they are subject to stringent Level I quality assurance and certification requirements. The technical specifications are governed by TDP Version 003 and NAVSEA drawing 6602371, with a specific requirement for MIL-DTL-24252 material. The contract mandates a zero-defect acceptance policy, strict material traceability from raw heat-lot to finished part, and the submission of a comprehensive Certificate of Compliance via the Wide Area Workflow system. Contractors must maintain a documented quality system compliant with ISO-9001 or MIL-I-45208 and provide a Quality Assurance Manual to be eligible for award. The government will perform quality assurance at the source, and all items must undergo rigorous final inspection, including thread inspection per FED-STD-H28. The award will be made to a responsible small business offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Delivery is required within 365 days after the effective date of the contract, with all items packaged and marked according to MIL-STD-2073 and MIL-STD-129.

Department Of The NavyMECHANICSBURG, PA, 17050-2411, USA

NAICS

332722

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

PSC

3452

Metalworking Machinery

Posted Oct 15, 2026

Total Small Business Set-AsideN0010426QFF34

3d left

Federal3

COUPLING ASSY, 1/4 — 4730LLH895959 — N0010426QFC38

Solicitation N00104-26-Q-FC38 is a request for quotation issued by NAVSUP Weapon Systems Support for the procurement of one 1/4 Inch Coupler Assembly. The item is designated as Special Emphasis material Level I Scope of Certification due to its application in crucial shipboard systems where failure could result in catastrophic loss of life or the vessel. Consequently, the contract mandates rigorous quality controls, including a higher-level quality requirement per FAR 52.246-11 and the maintenance of a quality system compliant with ISO-9001 or MIL-I-45208. Technical requirements specify that the assembly must adhere to Snap-tite drawing B648-78357 and satisfy toxicity and flammability requirements of NAVSEA SS800-AG-MAN-010/P-9290. Key deliverables include oxygen cleaning per MIL-STD-1330, quantitative chemical and mechanical analysis for specific components using QQ-N-281 material, and production testing per Test Specification TS-208. The contractor must provide a Certificate of Compliance and detailed test certifications via the Wide Area Workflow system. Inspection and acceptance occur at the origin, with Government Quality Assurance performed at source by a DCMA representative. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation will utilize the Supplier Performance Risk System to assess item, price, and supplier risk. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for electrostatic discharge protection and unique item identification. All modifications to form, fit, or function require the submission of an Engineering Change Proposal.

Department Of The NavyMECHANICSBURG, PA, 17050-2411, USA

NAICS

332912

Fluid Power Valve and Hose Fitting Manufacturing

PSC

3494

Metalworking Machinery

Posted Oct 14, 2026

N0010426QFC38

3d left

Federal2

This contract is a solicitation for the procurement of high-strength K-MONEL studs used in critical shipboard systems. Due to the high risk associated with material failure, these items are designated as Special Emphasis material requiring Level I Joint Source Certification. The technical specifications require the studs to be solution annealed and age hardened according to MIL-DTL-1222 and QQ-N-286, with a specific size of 1 1/8 inches in diameter and 6 1/4 inches in length. Key requirements include strict adherence to ISO-9001 quality systems, comprehensive traceability for every heat and lot of material, and mandatory non-destructive testing such as liquid penetrant and ultrasonic inspections. The delivery schedule requires certification data to be submitted via Wide Area Workflow (WAWF) for review and acceptance by the Portsmouth Naval Shipyard at least 20 days prior to delivery, with final material delivery due within 365 days of the contract effective date. The order is designated as a DO-rated order for national defense use under the Defense Priorities and Allocations System.

Department Of DefensePA,

NAICS

332722

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

PSC

5307

Hardware and Abrasives

Posted Sep 17, 2026

N0010426QFF64

Closed

Federal1

Solicitation N00104-26-Q-FC60, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the Level 1 repair and refurbishment of a Ball and Seat Set, identified as Special Emphasis material due to its role in crucial shipboard systems. The scope of work involves the teardown, evaluation, inspection, and full repair of the item to a like-new or A condition, including specific requirements for the refurbishment of balls and seats according to Newport News drawings. The contract requires strict adherence to material certifications, including quantitative chemical and mechanical analysis for SAE-AMS-6931 and Mearthane graphite-filled urethane, as well as non-destructive testing for weld repairs. Pricing must be submitted as either Not to Exceed or Firm Fixed Price, and quotes must include a beyond economic repair price. The procurement is designated as a DO rated order under the Defense Priorities and Allocations System and is issued pursuant to Emergency Acquisition Flexibilities. Key administrative updates include the dissolution of the small business set-aside, moving the solicitation to unrestricted status, and extending the closing date to June 10, 2026. Delivery involves a specific schedule where certification data must be submitted via Wide Area Workflow for review by Portsmouth Naval Shipyard at least 20 days prior to delivery, with final material delivery occurring within 48 days of the contract effective date. Quality assurance is stringent, requiring 100 percent inspection of traceability markings and certification test reports, with a one-year warranty from the date of delivery.

Department Of DefensePA,

NAICS

332919

Other Metal Valve and Pipe Fitting Manufacturing

PSC

4820

Valves

Posted Sep 17, 2026

unrestrictedN0010426QFC60

Closed

Federal3

STEM,FLUID VALVE — 4820013529144 — N0010426QFB68

This fixed-price solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of fluid valve stems (NSN 1HM 4820-01-352-9144 L1) designated as Special Emphasis material. Due to their use in crucial shipboard systems, these items are classified as Critical Safety Items (CSI), meaning any failure could result in catastrophic loss of life or ship damage. The contract requires strict adherence to Technical Data Package version 003 and mandates a quality system compliant with ISO-9001, with specific calibration requirements under ISO-10012 or ANSI-Z540.3. Key technical requirements include the use of MIL-DTL-24252 material, a prohibition on weld repairs for such material, and mandatory dye penetrant inspection per T9074-AS-GIB-010/271 and MIL-STD-2035. The award will be made to a single offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. The procurement is a DO-rated order under the Defense Priorities and Allocations System and is set aside for total small business. Security requirements are stringent, requiring compliance with NOFORN and Naval Nuclear Propulsion Information (NNPI) handling rules. Deliverables include the hardware and comprehensive certification data, including 100% inspection of material certifications and non-destructive testing, submitted via the Wide Area Workflow (WAWF) system. Final delivery of material is expected within 365 days of the contract's effective date, with a one-year warranty provided from the date of delivery.

Department Of The NavyMECHANICSBURG, PA, 17050-2411, USA

NAICS

332911

Industrial Valve Manufacturing

PSC

3491

Metalworking Machinery

Posted Aug 31, 2026

Total Small Business Set-AsideN0010426QFB68

Closed