Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Comperipherals Incorporated 16334 Heathrow Drive Tampa 33647-2641 US

UEI: SLED_32EB33A19D470E86

Comperipherals Incorporated 16334 Heathrow Drive Tampa 33647-2641 US is a federal contractor, registered under UEI SLED_32EB33A19D470E86. It has been awarded $9,493,929 across 153 federal contracts. Primary work spans Other Electronic Component Manufacturing, Gasket, Packing, and Sealing Device Manufacturing, and Printed Circuit Assembly (Electronic Assembly) Manufacturing.

Contact Information

Registration and classification details

Registration

UEI Code

SLED_32EB33A19D470E86

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency
Export
$9.5M100%
Awards by NAICS
Export
334419 - Other Electronic Component Manufacturing$968.3K10.2%
339991 - Gasket, Packing, and Sealing Device Manufacturing$954.4K10.1%
334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing$668.1K7%
334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing$666.1K7%
332911 - Industrial Valve Manufacturing$561.7K5.9%
336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing$463.6K4.9%
335312 - Motor and Generator Manufacturing$430.8K4.5%
334519 - Other Measuring and Controlling Device Manufacturing$395.8K4.2%
332510 - Hardware Manufacturing$362.5K3.8%
336320 - Motor Vehicle Electrical and Electronic Equipment Manufacturing$309.2K3.3%
334220 - Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing$292.0K3.1%
332996 - Fabricated Pipe and Pipe Fitting Manufacturing$274.5K2.9%
333612 - Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing$270.7K2.9%
332912 - Fluid Power Valve and Hose Fitting Manufacturing$265.0K2.8%
333911 - Pump and Pumping Equipment Manufacturing$207.0K2.2%
339999 - All Other Miscellaneous Manufacturing$199.5K2.1%
336611 - Ship Building and Repairing$190.9K2%
334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing$187.4K2%
444190 - Other Building Material Dealers$178.7K1.9%
335311 - Power, Distribution, and Specialty Transformer Manufacturing$174.5K1.8%
333912 - Air and Gas Compressor Manufacturing$166.3K1.8%
333314 - Optical Instrument and Lens Manufacturing$163.6K1.7%
333613 - Mechanical Power Transmission Equipment Manufacturing$159.0K1.7%
334290 - Other Communications Equipment Manufacturing$145.8K1.5%
332613 - Spring Manufacturing$131.1K1.4%
333999 - All Other Miscellaneous General Purpose Machinery Manufacturing$123.4K1.3%
335932 - Noncurrent-Carrying Wiring Device Manufacturing$112.0K1.2%
333316 - Photographic and Photocopying Equipment Manufacturing$90.5K1%
334513 - Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables$53.4K0.6%
333413 - Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing$50.0K0.5%
334310 - Audio and Video Equipment Manufacturing$49.2K0.5%
335921 - Fiber Optic Cable Manufacturing$47.5K0.5%
Others - Other NAICS codes (6 codes, <0.5% each)$181.4K1.9%
Awards by Agency Over Time
Export
Awards by Place of Performance

Open opportunities in Comperipherals Incorporated 16334 Heathrow Drive Tampa 33647-2641 US's top NAICS codes and agencies

NAICS: 332510
New
DIBBS
Supply of Machine Thread Plugs (NSN: 5365-011146444)The contract entails the supply of standardized machine thread plugs designated by NSN 5365-011146444, manufactured to meet military specifications for precision applications in defense or industrial systems. These components are critical for ensuring thread integrity and dimensional accuracy in high-stakes operational environments, requiring strict adherence to quality and performance standards. The offering is structured as a subcontract with recurring delivery obligations, indicating an ongoing need for these hardware items across multiple procurement cycles. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The North American Industry Classification System code 332510 identifies the category as machine shop and related services, underscoring the manufacturing and precision machining nature of the work. Performance is expected to be coordinated under DLA-managed logistics channels, though specific delivery locations are not outlined. Interested parties must respond through the official DIBBS portal prior to the deadline to be considered for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
NRP, LP HOSE ASSY-6A
Solicitation # SPE8EF-26-T-1589
This contract pertains to the procurement of NRP, LP HOSE ASSY-6A, identified by NSN 1730-01-655-9887 and part number 8028-080-8050-6 from PROGRESSIVE HYDRAULICS, INC., with a quantity of five units to be delivered under solicitation SPE8EF-26-T-1589. The item is classified as a TYPE I (CODE S) with a non-extendable shelf life of 60 months, as mandated by RS023, and requires compliance with DLA packaging standards under RP001 and MIL-STD-2073-1E, including specific packing methods, preservation, and marking per MIL-STD-129 with Special Marking Code 32. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The required delivery date is 167 days from contract award, with an original deadline of March 8, 2027, and a need ship date of February 1, 2027. The item must be shipped to the designated delivery address in Tracy, California, under transportation guidelines noted in DLAD Procurement Notes C19 and C20. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the version in effect on the solicitation issue date controls. The contract is subject to Covered Defense Information clauses and utilizes the DoD unit of issue, with pricing set at $5.00 per unit for a total value of $25.00.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
STEP, AIRCRAFT
Solicitation # SPE4A0-26-T-4173
This contract is for the procurement of one unit of a specific aircraft component identified by NSN 1560016184311 and part number 70217-02500-042 from Sikorsky Aircraft Corporation, with delivery required within five days of award at FOB origin. The item must be packaged and labeled in full compliance with DLA packaging requirements, specifically RP001, and marked per MIL-STD-129; if nonhazardous, packaging must adhere to ASTM D3951 unless superseded by higher-priority DLA technical requirements. Traceability documentation must be retained by the contractor under DLA Directive Procurement Note C03 from August 2016, and physical identification of the item must be performed as specified under RQ017. The contractor must also comply with Cybersecurity Maturity Model Certification Level 2 self-assessment requirements. Sampling for conformity is permitted under Sikorsky’s alternate plan QAP 1201, provided it meets or exceeds the standards of ASQ H1331 or MIL-STD-1916. Inspection and acceptance occur at destination, with no tolerance for quantity variance. Delivery must be shipped via a fast, traceable means, strictly avoiding parcel post, to the designated Naval Air Station North Island location. Unit of issue is each, and item unique identification is not required per service customer request. The delivery deadline is July 31, 2026, and all technical and quality specifications referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements effective as of the solicitation issue date.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-168C
The contract specifies the procurement of a single disk valve, identified by NSN 4820012210266, to be delivered to the USS BOXER LHD 4 at FPO AP 96661 under FOB Destination terms with a 20-day delivery window from the order date. The item is subject to strict DLA packaging and marking requirements, mandating compliance with MIL-STD-2073-1E for preservation and packaging, and MIL-STD-129 for labeling and barcoding, with no special marking required. Packaging must use polyethylene film wrap, fiberboard unit and intermediate containers, and adhere to DLA’s RP001 packaging guidelines. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with exceptions limited to functional uses in batteries, fluorescent lamps, sensors, controls, weapon systems, or specified chemical reagents; portable mercury-containing devices must include a secondary containment and comply with NAVSEA 5100-003D. Hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard, and any radioactive content exceeding specified thresholds must be disclosed and marked. Acceptance and inspection occur at the delivery point under FAR 52.246-2, and payment must be processed electronically through WAWF using the Invoice & Receiving Report format. The solicitation requires offerors to certify their Small Business status, UEI, and compliance with various FAR/DFARS clauses, including those on trafficking in persons, employment eligibility, sustainable products, cybersecurity controls, and prohibitions on hexavalent chromium. Contractual obligations also include adherence to FAR 52.222-36 and 52.222-50 regarding equal opportunity and anti-trafficking, FAR 52.227-1 for authorization and consent, and FAR 52.232-40 for accelerated payments to small business subcontractors. The performance location is a naval vessel with no designated Contracting Officer’s Representative mentioned, and the solicitation does not include evaluation factors, options, or detailed technical specifications beyond compliance-driven requirements. The contract is tied to a procurement request number and historical pricing data, but the current unit price is not stated, and the solicitation anticipates an automated award process consistent with its simplified nature.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9329
The contract specifies the procurement of a Right Hand Single Arm Mounting Bracket with NSN 5340-01-615-0030 under solicitation SPE7LX-26-U-9329, issued as a total small business set-aside under NAICS code 332510. The estimated quantity is 176 units with delivery to be made FOB origin within 116 days of order placement, though the contract operates as an indefinite-delivery, indefinite-quantity (IDIQ) instrument with no binding obligation until a specific delivery order is issued. Inspection and acceptance occur at the destination point, and compliance with military standards is mandatory: packaging must adhere to MIL-STD-2073-1E with preservation method 10 (clean and dry), while markings follow MIL-STD-129 and item identification complies with MIL-STD-130N, including permanent marking and barcoding. Sampling and inspection procedures require zero non-conformances using MIL-STD-1916 or ASQ H1331, with verification levels assigned to critical, major, and minor attributes. Hazardous materials must be labeled per 29 CFR 1910.1200 and require pre-award submission of Safety Data Sheets and a disclosure table identifying exempted substances under specific federal statutes. Payment must be processed electronically through WAWF, and the contractor is subject to a wide array of FAR and DFARS clauses covering small business representation, employment eligibility, trafficking in persons, cybersecurity safeguards, export control, and prohibitions on sourcing from certain entities. Packaging and palletization must meet DLA’s RP001 requirements, with no special marking or cushioning specified. The contract carries a maximum value of $350,000, though unit price data is not provided, and award will be made on a lowest price technically acceptable basis. The contracting officer’s representative and payment office details are not included but will be provided post-award through DD Form 1155 and DoDAAC codes.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE TO TUBE
Solicitation # SPE7M3-26-T-7852
The contract is for the procurement of 169 units of an elbow fitting designed to connect pipe to tube, identified by NSN 4730-00-090-8665 and part number MS51813-3, manufactured in compliance with MIL-DTL-18866K and MS51813G specifications. The item must adhere to strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, with procurement governed by full and open competition. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Delivery is required within 154 days from the contract award, with the product to be shipped FOB origin and subjected to inspection and acceptance at the destination. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 guidelines, with no special marking required and palletization aligned with DLA packaging standards. The unit of issue is each, with a fixed quantity and zero variance allowed, priced at $169.00 per unit for a total contract value of $28,561. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and an original delivery deadline of January 5, 2027. Transportation details follow DLA Procurement Notes C19 and C20, and all correspondence must reference the solicitation number SPE7M3-26-T-7852.
FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
SLOT FILLER MODULE
Solicitation # SPE8E9-26-T-3350
The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-917N
This contract, identified by solicitation number SPE7L1-26-T-917N, is for the procurement of 346 units of a clamp and loop component with NSN 5340-01-030-4980, priced at $346.00 per unit, totaling $119,716.00. Delivery is required FOB origin within 119 days, with the original delivery date set for November 25, 2026, and a needed ship date of December 15, 2026. All supplies must comply with stringent technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for zero-defect sampling, and strict adherence to packaging standards per MIL-STD-129 and RP001. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitution requires prior approval. Compliance documentation such as the Certificate of Quality Compliance is mandatory, and the Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The item must be shipped to the designated delivery point at DLA District San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, with packaging requirements depending on hazardous material status per FED-STD-313: non-hazardous items follow ASTM D3951 unless superseded by DLA requirements, while hazardous items must comply with TQ requirement IP025. Palletization must conform to DLA packaging guidelines, and all packaging and labeling must meet MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates full and open competition with no set-asides, and all technical data and revisions referenced, including TDP Rev A Gen 1 based on drawing NR 19207, take precedence. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the official point of contact for procurement inquiries is Isabelle Szulewski, reachable via email and phone listed in the contract.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A7-26-T-617T
The contract pertains to the procurement of one aircraft skin identified by NSN 1560-01-366-4266, with a delivery requirement of 142 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent documentation and compliance requirements including source approval submission, DLA packaging standards, and cybersecurity maturity model certification level 2 by a certified third-party assessment organization. Configuration changes require formal engineering change proposals for any deviations or waivers. Inspection and acceptance must occur at the manufacturer’s origin, and non-accepted items must have all government identification removed. Components are governed by Qualified Products Lists or Qualified Manufacturers Lists as defined in procurement note H02, and physical marking of the bare item is mandatory. While unique identification is not required per the service customer’s request, export control restrictions apply to associated technical data under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including employees of U.S. companies abroad. Distribution of such data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, confirmed training completion, and formal DLA authorization. The contract falls under solicitation SPE4A7-26-T-617T, issued by the Department of Defense through the ASC Supplier Operation AE and AF Division, with performance at Tinker AFB and a response deadline of August 13, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
LIGHT, LANDING, AIRCRAFT
Solicitation # SPE4A6-26-Q-1229
The contract pertains to the procurement of 80 units of a light landing aircraft component identified by NSN 6220-01-437-7640, with 40 units destined for Hill AFB, Utah, and 40 for Robins AFB, Georgia. Delivery is required within 634 days after award, with inspection and acceptance occurring at the manufacturer’s origin, and FOB terms also set at origin. Packaging must comply with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, including specific preservation, wrapping, cushioning, and unit container specifications, with marking adhering to MIL-STD-129 and a “Fragile” designation. The item is classified as a critical application item and requires adherence to SAE AS9100 quality management standards for both manufacturers and non-manufacturers. Sampling for quality verification must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. A Certificate of Conformance is permitted unless explicitly withheld by a quality assurance instruction. The contractor must also complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) governs this exception. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and solicitation amendment dates. A government first article test is required for one unit, as specified under FAR 52.209-4, and the contract includes detailed transportation instructions and shipping addresses for both distribution points.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9318
The contract is for the procurement of 631 mounting brackets, identified by NSN 5340-01-647-8723, under solicitation SPE7LX-26-U-9318, issued by the Strategic Acq Program Directorate of the Department of Defense. Delivery is required within 113 days after receipt of order, with a guaranteed minimum of 94 units and a contract ceiling of $350,000. The contract is structured as an indefinite-delivery, indefinite-quantity (IDIQ) vehicle, meaning orders will be issued during a one-year period following award, with performance dictated by individual delivery orders. FOB origin applies, placing delivery responsibility on the contractor to the origin point, while inspection and acceptance occur at the destination under government oversight governed by FAR 52.246-2. Packaging must comply with RP001 DLA requirements, ASTM D3951 for non-hazardous items, and FED-STD-313 for hazardous materials, with labeling conforming to MIL-STD-129 and 29 CFR 1910.1200. Hazardous materials require pre-award submission of hazard labels and safety data sheets, and foreign-flag vessel use for ocean transport is prohibited unless a waiver is obtained at least 45 days in advance. The contract incorporates numerous FAR and DFARS clauses, including mandatory cybersecurity provisions such as 252.204-7012 for safeguarding covered defense information and 252.240-7997 requiring NIST SP 800-171 compliance for protecting controlled unclassified information on contractor systems. Additional clauses enforce compliance with export controls, prohibitions on hexavalent chromium and communist Chinese military company products, whistleblower rights disclosures, and electronic invoicing through WAWF. The contractor must also adhere to levies on payments for outstanding debts, subcontracting transparency for commercial items, and pricing methodologies for modifications. All technical and quality requirements are tied to the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. Offerors must submit electronic responses via DIBBS by August 20, 2026, and are required to complete mandatory representations regarding small business status, UEI, and compliance with defense information handling standards, though no offeror-specific certifications are present in the solicitation
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336413
New
DIBBS
CRADLE, GROUND HANDL
Solicitation # SPE8EF-26-T-1556
The contract pertains to the procurement of 13 units of a cradle ground handling item identified by NSN 1730-01-362-0348 under solicitation SPE8EF-26-T-1556, with a response deadline of August 17, 2026, and a delivery requirement within 167 days of award. The item is subject to stringent DLA packaging, technical, and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date. Cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment, and the contract incorporates requirements for handling Covered Defense Information. Export control restrictions apply due to technical data governed by ITAR or EAR regulations, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completion of DLA-specific training, and formal authorization. Additionally, contractors must remove any government identification from non-accepted supplies. The procurement is managed by the Department of Defense under NAICS code 336413, with performance located in New Cumberland, Pennsylvania, and primary contact information provided for Russell Keiser.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
CRANK, HAND
Solicitation # SPE7LX-26-U-9330
The contract is for the procurement of 180 units of CRANK, HAND with NSN 5340016237876 under solicitation SPE7LX-26-U-9330, issued by the Defense Logistics Agency through an Indefinite-Delivery Contract (IDC) with a maximum value of $350,000. The estimated annual quantity is non-binding, and the guaranteed minimum is 27 units. Delivery is FOB Origin with a 76-day delivery window after order placement, and the final delivery destination is within the Continental United States under DLA Direct CONUS coverage. Inspection and acceptance occur at the destination point by the Government. Packaging must adhere to DLA’s RP001 packaging requirements and MIL-STD-129 for marking and labeling, with non-hazardous items packaged per ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which take precedence. Hazardous materials must comply with TQ IP025, and all packaging must reflect the specified QUP of 001. Bar-coding follows MIL-STD-129 standards, and radioactive materials exceeding 0.002 microcuries per gram or 0.01 microcuries per item require explicit labeling per the same standard. Safety Data Sheets are mandatory for hazardous materials, and all labeling must comply with 29 CFR 1910.1200. The contract mandates full compliance with cybersecurity requirements under NIST SP 800-171 and DFARS 252.204-7012, including 72-hour reporting of cyber incidents, and flow-down requirements to subcontractors. Contractors must use E-Verify for employment eligibility, maintain anti-trafficking compliance programs, and avoid use of prohibited telecommunications equipment from suppliers like Huawei, ZTE, Hikvision, or Dahua. All submissions must be made electronically via the DLA Internet Bid Board System (DIBBS) by August 20, 2026, with invoicing handled exclusively through Wide Area WorkFlow. Offerors must disclose their Unique Entity Identifier and CAGE code, represent their small business status and socioeconomic certifications, and provide UEIs for joint venture partners if applicable. The contract includes clauses governing unenforceable obligations, accelerated payments to small business subcontractors, sustainable products, and prohibition of unauthorized obligations,
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
LEVER (FPC)
Solicitation # SPEFA3-26-Q-0054
The contract pertains to the procurement of 8 units of a lever designated as FPC with part number 70209-21221-113 and NSN 1560-LLQJ59653, under solicitation SPEFA3-26-Q-0054, issued by the DLA Fleet Readiness Center Southeast. The contract specifies a firm fixed price with no variance allowed in quantity, requiring delivery within 30 days after award at destination with inspection and acceptance also occurring at the destination. The item is to be packaged in compliance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence, and packaging must be marked and labeled per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and unit of issue and packaging quantity must match contract specifications. Item Unique Identification is not required per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) applicable. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery address for freight shipping and parcel post is specified as the Fleet Readiness Center Southeast in Jacksonville, Florida, with the required delivery date set for August 4, 2026.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L4-26-U-1055
The contract solicitation SPE7L4-26-U-1055 seeks 31 gaskets identified by NSN 5330-01-701-0239 under a Total Small Business Set-Aside, with a maximum contract value of $350,000 and a delivery deadline of 97 days after order placement. The item is classified as a commercial item and must be free of asbestos, with packaging strictly compliant with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag for all Direct Vendor Delivery, Foreign Military Sales, and stock shipments, particularly due to UV sensitivity of FSC 5330/5331 components. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf-life items, and all units must be uniquely identified per MIL-STD-130N with UHF RFID or 2D Data Matrix barcoding. The contract includes strict compliance with safeguarding covered defense information under 252.204-7012 and NIST SP 800-171 requirements, with mandatory cyber incident reporting, and prohibits procurement of covered defense telecommunications equipment from restricted entities. Invoicing is required through WAWF, with payment subject to accelerated payments to small business subcontractors, and inspection and acceptance occur at the destination by the Government under the fixed-price inspection clause. The solicitation mandates full representation of small business status and UEI/CAGE codes, with additional disclosures required for hazardous materials under 29 CFR 1910.1200 and for any covered defense telecommunications products. All deliveries are restricted to the continental United States under FOB Origin terms, and offers are evaluated on price and other factors, not solely on lowest cost. Deviations from standard FAR clauses apply throughout, particularly under Deviation 2026-00038, affecting clauses related to contract type, payment, subcontracting, and cybersecurity, with additional compliance required for whistleblower rights, restrictions on forced arbitration, and prohibitions on hexavalent chromium and toxic materials.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A5-26-T-331N
The contract is for a single-leg wire rope assembly with part number 0001S00000052 and a quantity of eight units, issued under solicitation SPE4A5-26-T-331N with a delivery deadline of 509 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must be physically marked per RQ017, and component qualification is required under QPL/QML lists referenced in procurement note H02. Inspection and acceptance occur at the manufacturer’s origin unless otherwise directed. Sampling follows MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned specific verification levels or AQLs; unspecified attributes are treated as major. Zero non-conformances are required for acceptance unless stated otherwise. The item is subject to export controls under ITAR or EAR, with technical data restricted to contractors holding approved JCP certification, having completed required DOD export control training, and received DLA authorization. DFARS 252.225-7048 governs the handling of this controlled data, extending restrictions to all foreign nationals regardless of location. Cybersecurity requirements mandate CMMC Level 2 certification by a C3PAO. Covered defense information is subject to RD002, and the contractor must comply with tailored higher-level quality requirements. Item Unique Identification is not required per customer request, with DFARS 252.211-7003(c)(1)(i) applying. The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division with performance in New Cumberland, PA, and primary point of contact is Hien-Van Trinh.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details