Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CRADLE, GROUND HANDL

Active
SPE8EF-26-T-1556Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 13 units of a cradle ground handling item identified by NSN 1730-01-362-0348 under solicitation SPE8EF-26-T-1556, with a response deadline of August 17, 2026, and a delivery requirement within 167 days of award. The item is subject to stringent DLA packaging, technical, and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date. Cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment, and the contract incorporates requirements for handling Covered Defense Information. Export control restrictions apply due to technical data governed by ITAR or EAR regulations, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completion of DLA-specific training, and formal authorization. Additionally, contractors must remove any government identification from non-accepted supplies. The procurement is managed by the Department of Defense under NAICS code 336413, with performance located in New Cumberland, Pennsylvania, and primary contact information provided for Russell Keiser.

General Info

Procure 13 cradle units under NSN 1730-01-362-0348, delivery in 167 days, CMMC Level 2, ITAR/EAR controlled, DLA standards apply.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8EF-26-T-1556.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUS
Contacts
Russell Keiser
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CRADLE,GROUND HANDL
CRADLE,GROUND HANDL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1730-01-362-0348 Quantity: 13 EA Purchase Request: 7017757696QTY: 13 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
NRP, LP HOSE ASSY-6A
Solicitation # SPE8EF-26-T-1589
This contract pertains to the procurement of NRP, LP HOSE ASSY-6A, identified by NSN 1730-01-655-9887 and part number 8028-080-8050-6 from PROGRESSIVE HYDRAULICS, INC., with a quantity of five units to be delivered under solicitation SPE8EF-26-T-1589. The item is classified as a TYPE I (CODE S) with a non-extendable shelf life of 60 months, as mandated by RS023, and requires compliance with DLA packaging standards under RP001 and MIL-STD-2073-1E, including specific packing methods, preservation, and marking per MIL-STD-129 with Special Marking Code 32. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The required delivery date is 167 days from contract award, with an original deadline of March 8, 2027, and a need ship date of February 1, 2027. The item must be shipped to the designated delivery address in Tracy, California, under transportation guidelines noted in DLAD Procurement Notes C19 and C20. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the version in effect on the solicitation issue date controls. The contract is subject to Covered Defense Information clauses and utilizes the DoD unit of issue, with pricing set at $5.00 per unit for a total value of $25.00.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
STEP, AIRCRAFT
Solicitation # SPE4A0-26-T-4173
This contract is for the procurement of one unit of a specific aircraft component identified by NSN 1560016184311 and part number 70217-02500-042 from Sikorsky Aircraft Corporation, with delivery required within five days of award at FOB origin. The item must be packaged and labeled in full compliance with DLA packaging requirements, specifically RP001, and marked per MIL-STD-129; if nonhazardous, packaging must adhere to ASTM D3951 unless superseded by higher-priority DLA technical requirements. Traceability documentation must be retained by the contractor under DLA Directive Procurement Note C03 from August 2016, and physical identification of the item must be performed as specified under RQ017. The contractor must also comply with Cybersecurity Maturity Model Certification Level 2 self-assessment requirements. Sampling for conformity is permitted under Sikorsky’s alternate plan QAP 1201, provided it meets or exceeds the standards of ASQ H1331 or MIL-STD-1916. Inspection and acceptance occur at destination, with no tolerance for quantity variance. Delivery must be shipped via a fast, traceable means, strictly avoiding parcel post, to the designated Naval Air Station North Island location. Unit of issue is each, and item unique identification is not required per service customer request. The delivery deadline is July 31, 2026, and all technical and quality specifications referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements effective as of the solicitation issue date.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A7-26-T-617T
The contract pertains to the procurement of one aircraft skin identified by NSN 1560-01-366-4266, with a delivery requirement of 142 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent documentation and compliance requirements including source approval submission, DLA packaging standards, and cybersecurity maturity model certification level 2 by a certified third-party assessment organization. Configuration changes require formal engineering change proposals for any deviations or waivers. Inspection and acceptance must occur at the manufacturer’s origin, and non-accepted items must have all government identification removed. Components are governed by Qualified Products Lists or Qualified Manufacturers Lists as defined in procurement note H02, and physical marking of the bare item is mandatory. While unique identification is not required per the service customer’s request, export control restrictions apply to associated technical data under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including employees of U.S. companies abroad. Distribution of such data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, confirmed training completion, and formal DLA authorization. The contract falls under solicitation SPE4A7-26-T-617T, issued by the Department of Defense through the ASC Supplier Operation AE and AF Division, with performance at Tinker AFB and a response deadline of August 13, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
LIGHT, LANDING, AIRCRAFT
Solicitation # SPE4A6-26-Q-1229
The contract pertains to the procurement of 80 units of a light landing aircraft component identified by NSN 6220-01-437-7640, with 40 units destined for Hill AFB, Utah, and 40 for Robins AFB, Georgia. Delivery is required within 634 days after award, with inspection and acceptance occurring at the manufacturer’s origin, and FOB terms also set at origin. Packaging must comply with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, including specific preservation, wrapping, cushioning, and unit container specifications, with marking adhering to MIL-STD-129 and a “Fragile” designation. The item is classified as a critical application item and requires adherence to SAE AS9100 quality management standards for both manufacturers and non-manufacturers. Sampling for quality verification must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. A Certificate of Conformance is permitted unless explicitly withheld by a quality assurance instruction. The contractor must also complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) governs this exception. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and solicitation amendment dates. A government first article test is required for one unit, as specified under FAR 52.209-4, and the contract includes detailed transportation instructions and shipping addresses for both distribution points.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A5-26-T-331N
The contract is for a single-leg wire rope assembly with part number 0001S00000052 and a quantity of eight units, issued under solicitation SPE4A5-26-T-331N with a delivery deadline of 509 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must be physically marked per RQ017, and component qualification is required under QPL/QML lists referenced in procurement note H02. Inspection and acceptance occur at the manufacturer’s origin unless otherwise directed. Sampling follows MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned specific verification levels or AQLs; unspecified attributes are treated as major. Zero non-conformances are required for acceptance unless stated otherwise. The item is subject to export controls under ITAR or EAR, with technical data restricted to contractors holding approved JCP certification, having completed required DOD export control training, and received DLA authorization. DFARS 252.225-7048 governs the handling of this controlled data, extending restrictions to all foreign nationals regardless of location. Cybersecurity requirements mandate CMMC Level 2 certification by a C3PAO. Covered defense information is subject to RD002, and the contractor must comply with tailored higher-level quality requirements. Item Unique Identification is not required per customer request, with DFARS 252.211-7003(c)(1)(i) applying. The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division with performance in New Cumberland, PA, and primary point of contact is Hien-Van Trinh.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
COVER, AIRCRAFT ENGI
Solicitation # SPE8EF-26-T-1565
This contract pertains to the procurement of a cover for an aircraft engine, identified by part number WL19C92-2 and NSN 1730-01-367-2938, with a quantity of 41 units to be delivered FOB origin. The delivery must be completed within 247 days from the contract award, with a required ship date of April 22, 2027, and an original delivery deadline of May 19, 2027. All items must be packaged in accordance with ASTM D3951, but must fully comply with the more stringent DLA Master List of Technical and Quality Requirements, which take precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The unit of issue is each, with no variance permitted in quantity delivery. Inspection and acceptance occur at the destination, and all supplies must be delivered to the specified DLA Distribution Depot in Tinker AFB, Oklahoma. The contract includes mandatory compliance with cybersecurity requirements under CMMC Level 2 Self-Assessment due to the handling of covered defense information, and all technical and quality specifications are governed by referenced R or I numbers within the DLA Master List. The solicitation, identified as SPE8EF-26-T-1565, was issued on August 5, 2026, with responses due by August 17, 2026, and is classified under NAICS code 336413 for aircraft engine and engine parts manufacturing. The contractor is required to remove any government identification from non-accepted supplies and must ensure that the delivered item is for a critical application. The point of contact for inquiries is Russell Keiser of the Defense Logistics Agency, and all transportation logistics follow DLAD procedural notes C19 and C20. The total contract value is $1,681.00 based on a unit price of $41.00 per item.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
COVER, AIRCRAFT GROUND
Solicitation # SPE8EF-26-T-1542
The contract pertains to the procurement of 45 units of aircraft ground servicing covers identified by NSN 1730-00-675-3215 under solicitation SPE8EF-26-T-1542, with a delivery deadline of 407 days from award. The item is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including specific provisions for packaging, inspection and acceptance at origin, and removal of government identification from non-accepted supplies. The technical data associated with this item is classified as covered defense information and is subject to export control under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure or transfer, including to foreign nationals within the United States. Contractors must be certified under the US/Canada Joint Certification Program, have completed mandatory DOD export control training, and obtain formal approval from DLA to access the controlled data. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with validated credentials may handle the technical data. The contract also requires CMMC Level 2 certification for any third-party assessment organization involved, reflecting heightened cybersecurity mandates. The placing agency is the Department of Defense, with performance taking place in New Cumberland, PA, and the point of contact is Russell Keiser, reachable via official DLA channels.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
CLAMP, BLOCK
Solicitation # SPE4A5-26-T-331D
The contract pertains to the procurement of 101 units of CLAMP, BLOCK with NSN 1560016946944 and part number 842-349845-14, intended for a critical application under The Boeing Company. Delivery is required within 170 days from the contract date, with FOB origin terms and inspection and acceptance occurring at the destination. The item must comply with stringent packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s procurement standards, and palletization follows RP001 guidelines. The part is subject to FAA bare item marking requirements and airworthiness approval under RQ019, necessitating a Certificate of Airworthiness and Conformance. Supply chain traceability documentation must be retained per DLA Directive Procurement Notes C03, and configuration change management is governed by RQ002. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attribute levels are predefined as VII, IV, and II for critical, major, and minor characteristics respectively. The acquisition falls under simplified procedures, with technical and quality requirements referenced from the DLA Master List, and no unit of issue translation is needed as the DoD unit is used. All applicable CDRLs and technical data packages are to be reviewed, with the delivery address specified as the DLA Distribution facility in New Cumberland, PA. The contract solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, and the original required delivery date is September 3, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CUSHION, BOTTOM, EXPL
Solicitation # SPE8ED-26-T-1223
The item is a cushion designed for bottom use in a shipping and storage container, identified by NSN 8135-01-029-1285, with a quantity of 52 units required under purchase request 7017758186. Delivery is scheduled 167 days after award. The solicitation number is SPE8ED-26-T-1223, posted on August 5, 2026, with responses due by August 17, 2026. This procurement falls under NAICS code 336413 and is managed by the Department of Defense under the Construction & Equipment Containers organization, with performance to be completed in Tracy, California, 95304-5000. Ogden Howard is the primary point of contact, reachable via email and phone provided. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting its disclosure or transfer to foreign persons, regardless of location, including employees of foreign subsidiaries of U.S. companies. Access to this controlled data is limited to DLA contractors with an approved U.S./Canada Joint Certification Program certification, who have completed mandatory training on handling DOD export-controlled technical data and have been formally authorized by DLA. Compliance with DFARS 252.225-7048 is required, and failure to adhere to these controls may result in legal penalties. The solicitation is publicly accessible through the DIBBS system.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
PIVOT BLOCK ASSY, LA
Solicitation # SPE4A7-26-T-618N
The contract is for the procurement of 22 units of a Pivot Block Assembly with NSN 1560-01-165-5479 under solicitation SPE4A7-26-T-618N, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division. Delivery is required within 79 days after award, with the place of performance located in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026. This item contains technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons, regardless of location, or to foreign subsidiaries requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only DLA contractors with approved JCP certification, completion of mandatory DOD export control training, and approval from DLA authorities are permitted to access the technical data. The NAICS code is 336413, and all distribution must comply fully with DLA packaging and export control requirements.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
COVER, AIRCRAFT GROU
Solicitation # SPE8EF-26-T-1545
The contract pertains to the procurement of aircraft ground servicing covers under solicitation SPE8EF-26-T-1545, issued by the Defense Logistics Agency with a total quantity of 25 units at a unit price of $25.00, resulting in a total contract value of $625.00. The item is identified by NSN 1730-01-082-6397 and part number 4-76040-501, and is subject to strict technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling and adhere to DLA Packaging Requirements for Procurement (RP001), including palletization standards. Delivery is FOB origin with zero tolerance for quantity variance and must occur within 167 days from the contract award, with the original required delivery date set for March 28, 2027. Inspection and acceptance occur at the destination, and the product must be delivered to the specified receiving warehouse in Tracy, California. The solicitation is a total small business set-aside under NAICS code 336413, with four qualified suppliers listed: Weckworth Manufacturing Inc, Coating Specialties Inc, Ganar Industries LLC, and Northrop Grumman Systems Corporation. The cover is intended for use in aircraft ground servicing operations, and the contract incorporates mandatory compliance with applicable defense logistics standards, including the removal of government identification from non-accepted supplies and the handling of covered defense information. The point of contact for the contract is Russell Keiser, and all transportation logistics are governed by DLAD procedures C19 and C20. The original need ship date is February 1, 2027, and responses to the solicitation were due by August 17, 2026, with the solicitation posted on August 5, 2026. The unit of issue is each (EA), and the order must follow the specified ANSI X12 unit of issue mappings as defined by the DLA.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
DUCT ASSEMBLY, AIR C
Solicitation # SPE4A7-26-T-618E
This contract pertains to the procurement of a duct assembly for air conditioning-heating systems, identified by part number 4A92040-103A and NSN 1660008833626, with a required quantity of five units. The item is source-controlled and must be manufactured and tested in strict accordance with limited rights data held by Lockheed Martin Corporation and sourced exclusively from Arrowhead Products Corporation, with no alternative suppliers permitted unless an approved source approval request is submitted and granted. Technical and quality requirements are governed entirely by the DLA Master List of Technical and Quality Requirements, with specific protocols for inspection, testing, and documentation, including the use of zero-defect sampling under MIL-STD-1916 or ASQ H1331, and mandatory adherence to verification levels and AQLs for critical, major, and minor attributes. All items must be inspected and accepted at origin, with no tolerance for quantity variance, and must be packaged in compliance with ASTM D3951 and MIL-STD-129, as superseded by DLA packaging standards, with palletization following RP001 guidelines. The item is designated as a critical application and requires physical identification and labeling per RQ017. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. The delivery is FOB origin with a 473-day lead time, and the required delivery date is January 12, 2028, with a need ship date of November 30, 2027. The contract designates Robins Air Force Base, Georgia as the sole delivery point, and unit price is set at $5.00 per unit. Government identification must be removed from non-accepted supplies, and item unique identification is waived per customer request.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

NAICS: 333923
New
DIBBS
FRAME, HOIST
Solicitation # SPE8EE-26-T-2274
The contract pertains to the procurement of seven FRAME, HOIST units under solicitation number SPE8EE-26-T-2274, with a specified delivery timeframe of 167 days after award. The item is identified by NSN 3950-01-680-9587 and linked to purchase request 7017757573. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers, and the controlling revision depends on whether the acquisition is simplified or large, as defined by solicitation or amendment dates. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The contract may involve covered defense information under RD003 requirements. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026. Performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002, under the Department of Defense, specifically the Construction & Equipment Manufacture and Construction organization. Primary point of contact is Philip Ferrara, reachable via email and phone listed in the contract data.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
ROLLER ASSEMBLY, CON
Solicitation # SPE8EF-26-Q-0165
The contract is for the procurement of 20 roller assemblies with NSN 1730-01-245-7322 under solicitation SPE8EF-26-Q-0165, with a 60-day delivery requirement from award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the type of acquisition and applicable dates. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The contractor must be certified at CMMC Level 2 by an approved third-party assessment organization and handle covered defense information in accordance with applicable regulations. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels or AQLs. Technical data associated with this item is subject to export control under ITAR or EAR, requiring prior government authorization for disclosure or transfer, including to foreign nationals within the United States. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD training, and DLA authorization. The contract is issued by the Department of Defense, with Sharon Forde as the primary point of contact.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333923
New
DIBBS
SCREEN, INTAKE COVER, WI
Solicitation # SPE8EE-26-T-2233
The contract pertains to the procurement of 27 units of a SCREEN, INTAKE COVER, WINCH with NSN 3950-01-169-8697 under solicitation SPE8EE-26-T-2233, issued by the Defense Logistics Agency. Delivery is required within 167 days after award, and the procurement falls under NAICS code 333923 for construction and equipment manufacturing. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item is subject to export controls under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Commerce. Access to this restricted data is limited to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and formal approval from DLA. Cybersecurity requirements mandate CMMC Level 2 certification for any third-party assessment organization involved in handling the contract. All covered defense information is subject to applicable DFARS clauses, including DFARS 252.225-7048, and the point of contact for the procurement is Philip Ferrara at the Department of Defense, with performance designated at New Cumberland, PA, ZIP 17070-5002.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
SKID, PLATFORM
Solicitation # SPE8EF-26-T-1567
The contract is for the procurement of 2,243 units of a SKID, PLATFORM identified by NSN 3990-01-484-6521 under solicitation SPE8EF-26-T-1567, with a total price of $2,243.00 per unit. Delivery is required FOB origin within 167 days of the contract award, with inspection and acceptance points both set at the destination. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with wooden pallets and containers constructed from heat-treated wood certified by an ALSC-recognized agency, marked clearly and visibly. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Oak and chestnut wood must be bark-free, square-edged, or have a moisture content of no more than 20 percent. The contractor is responsible for inspecting each shipment for compliance. Deliveries must be sent to DLA Distribution Red River in Texarkana, Texas, with an original required delivery date of February 5, 2027, and a need ship date of February 1, 2027. The unit of issue is each, with no variance allowed in quantity.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
PUMP, BUCKET, LUBRICA
Solicitation # SPE8EE-26-T-2220
The contract solicits 39 units of a hand-operated, T-handle pressure pump system designed for lubrication use, which includes a heavy-duty 3/8-inch I.D. hose between 6 to 10 feet long, a follower plate, and a container with a foot step and leakproof cover that supports the pump head. All items must comply with DLA packaging requirements and incorporate technical and quality standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date. The product must be marked in accordance with MIL-STD-130N for U.S. military property identification, and the contractor is required to overpack one copy of the manufacturer’s commercial manual covering operation, service, maintenance, and repair with each unit. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and unspecified attributes are treated as major with verification levels assigned accordingly. The solicitation number is SPE8EE-26-T-2220, issued August 5, 2026, with responses due by August 17, 2026, under NAICS code 333914 for construction and equipment manufacturing. Delivery is due within 167 days of award, and performance is to be completed at New Cumberland, Pennsylvania, with Philip Ferrara identified as the primary point of contact.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325211
New
DIBBS
ROLLER, MATERIAL HANDLI
Solicitation # SPE8EF-26-T-1577
The contract specifies the procurement of 16 material handling rollers identified by NSN 3990-01-588-5068 and part number 5250126, manufactured by ETNYRE & CO, with all metal structural components painted tan 686 using CARC coating, excluding plastic roller wheels and plated fasteners. The item must comply with all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must be packaged and labeled per MIL-STD-129 in accordance with DLA Packaging Requirements, including palletization as defined in RP001. The unit of issue is each, with a fixed quantity of 16 units and zero variance allowed. Delivery is FOB origin with inspection and acceptance occurring at destination, and the product must be shipped no later than February 1, 2027, to fulfill the original delivery requirement of January 16, 2027, within a 167-day delivery window. Packaging must align with DLA standards and be addressed to DDSP New Cumberland Facility in New Cumberland, PA, with transportation governed by DLAD Proc Note C19 and C20. The solicitation was issued under SPE8EF-26-T-1577 as a Women-Owned Small Business Set-Aside, with a response deadline of August 17, 2026, and the contract falls under NAICS code 325211 for chemical and allied products manufacturing.
Plastics Material and Resin Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
SLING, MULTIPLE LEG
Solicitation # SPE8EE-26-T-2264
This contract is for the procurement of three multiple-leg slings with NSN 3940-01-699-9168 and part number D3340 002 from TAYLOR DEFENSE PRODUCTS, LLC, under solicitation SPE8EE-26-T-2264. The items must be delivered FOB origin within 167 days, with no variance allowed in quantity, and are subject to inspection and acceptance at the destination warehouse in Tracy, California. All packaging must comply with ASTM D3951, but must strictly adhere to the superior requirements of the DLA Master List of Technical and Quality Requirements, including labeling per MIL-STD-129 and palletization as defined by RP001. The unit of issue is each, with a total contract value of $9.00, and the delivery must be completed by February 1, 2027, following the original required delivery date of December 13, 2026. Transportation logistics are governed by DLAD procedural notes C19 and C20, and the sole point of contact for the contract is Philip Ferrara, reachable via phone and email provided. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333923 for construction and equipment manufacturing.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
ROPE, FIBROUS
Solicitation # SPE8EE-26-T-2229
This contract specifies the procurement of fibrous, plaited rope meeting MIL-DTL-24537A standards, with a circumference of 1.5 inches, supplied in 400-foot reels totaling 38 reels. The rope is classified as a critical item requiring source inspection and must be sourced exclusively from manufacturers or distributors listed on the Qualified Suppliers List for Manufacturers/Distributors (QSLM/QSLD) under FSC 4020; any deviation from this requirement renders a bid noncompliant and may result in criminal penalties. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the product must conform to specific packaging standards including MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Mercury or mercury-containing compounds are strictly prohibited except for defined exceptions such as batteries, fluorescent lights, and authorized instruments, with portable devices containing mercury needing shock-proof design and secondary containment per NAVSEA 5100-003D. The quality assurance protocol EQ003 applies, and for QSL-compliant suppliers, additional inspection requirements such as COQC, PVT, and ASQ H1331 are waived. Delivery is FOB origin to the recipient warehouse in Tracy, California, with a 57-day delivery window and a required ship date of August 11, 2025, despite the original delivery date being listed as December 8, 2026. The contract enforces a zero percent quantity variance, with inspection and acceptance occurring at destination, and transportation procedures are governed by DLA Procurement Notes C19 and C20.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
FAIRING, RESCUE HOIST, H
Solicitation # SPE8EE-26-T-2251
The contract pertains to the procurement of seven units of a fairing and rescue hoist for helicopter applications, identified by part number 42315-120 and NSN 3950-01-377-3199, supplied by Goodrich Corporation under CAGE code 3HRL4. Delivery is required in 167 days with a firm delivery date of February 1, 2028, and the items must be shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the origin, and the supplier must comply with DLA’s packaging standards, which mandate adherence to MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and RP001 for DLA packaging requirements, with DLA’s Master List of Technical and Quality Requirements taking precedence over all other standards. Sampling for quality assurance must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major and acceptance requires zero non-conformances unless otherwise stipulated. The unit of issue is each, with a total contract value of $7.00 per unit, totaling $49.00, and the procurement is governed under solicitation SPE8EE-26-T-2251, issued on August 5, 2026, with a response deadline of August 17, 2026. The end destination for delivery is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation must conform to DLAD Proc Note C19 for freight and C20 for first destination. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) applies. Physical identification of the bare item must include the contractor’s name, CAGE code, and part number in accordance with RQ017. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List, with the revision in effect on the RFP issue date controlling unless amended. The product falls under NAICS code 333923 for defense equipment manufacturing and is classified as a federal acquisition under the Department of Defense.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details