Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Johns Hopkins University Applied Physics Laboratory 11100 Johns Hopkins Rd LAUREL MD 20723 USA

UEI: SLED_A371F35B2954A73B

Johns Hopkins University Applied Physics Laboratory 11100 Johns Hopkins Rd LAUREL MD 20723 USA is a federal contractor, registered under UEI SLED_A371F35B2954A73B. It has been awarded $99,800,240 across 3 federal contracts. Primary work spans Research and Development in the Physical, Engineering, and Life Sciences (except Biotechnology) and Other Scientific and Technical Consulting Services. Top awarding agencies include FA9401 377 Msg Pk and Washington Headquarters Services.

Contact Information

Registration and classification details

Registration

UEI Code

SLED_A371F35B2954A73B

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

FA9401 377 Msg Pk$97.3M97.5%

Washington Headquarters Services$2.5M2.5%

Awards by NAICS

541712 - Research and Development in the Physical, Engineering, and Life Sciences (except Biotechnology)$97.3M97.5%

541690 - Other Scientific and Technical Consulting Services$2.5M2.5%

Awards by Agency Over Time

Awards by Place of Performance

Open opportunities in Johns Hopkins University Applied Physics Laboratory 11100 Johns Hopkins Rd LAUREL MD 20723 USA's top NAICS codes and agencies

Technical Data & Export Control Compliance (ITAR/EAR) SupportThe contract requires comprehensive support for compliance with U.S. International Traffic in Arms Regulations and Export Administration Regulations concerning technical data, including implementation and management of access controls, employee training programs, and systematic tracking of authorizations to ensure adherence to international export control requirements. It specifically demands alignment with the U.S. and Canada Joint Certification Program to facilitate secure technical cooperation between the two nations while maintaining strict regulatory boundaries on the transfer of controlled information. This subcontract is designated as a Total Small Business Set-Aside under the SBA’s Small Business Administration guidelines, with the North American Industry Classification System code 541690 identifying it as other professional, scientific, and technical services. The work is solicited by the ASC Commodities Division within the Department of Defense, and responses must be submitted by August 11, 2026, with the opportunity posted on July 29, 2026. Performance location details are unspecified, and the contract falls under the broader DoD procurement ecosystem managed through the DIBBS system.

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Safety Data Sheet (SDS) Management for IT ProductsThe contract mandates the preparation and submission of OSHA-compliant Safety Data Sheets for IT equipment that contains regulated substances, ensuring all documentation adheres to federal safety and disclosure standards. This subcontract requires the vendor to accurately identify hazardous components within IT products, compile compliant SDS documentation in accordance with GHS and OSHA requirements, and deliver finalized sheets in a timely and structured manner. The work must be performed for equipment used by Brookhaven National Laboratory under the Department of Energy, with all submissions aligned to the exact specifications for content, format, and regulatory compliance. Performance is centered at Upton, New York, with a response deadline of August 10, 2026, and the NAICS code 541690 indicates this falls under other scientific and technical consulting services. The contract does not specify a set-aside status or detailed point of contact, and all deliverables must be submitted through the designated SAM.gov portal. The successful contractor must possess demonstrated expertise in regulatory documentation for electronics and IT hardware, with a strong understanding of chemical hazard communication protocols and the ability to maintain consistent quality across multiple product lines.

Brookhaven National Labor -Doe Contractor

POSTED

about 11 hours ago

DEADLINE

Business Administrative and Support Integrated Services (BASIS)

Solicitation # CM051120261134

Washington Headquarters Services, Acquisition Directorate is conducting market research for the Business Administrative and Support Integrated Services (BASIS) procurement under NAICS code 541611, which has a small business size standard of $34 million in annual revenue. This sources sought notice is purely informational and does not constitute a solicitation, request for proposal, or binding obligation on the Government; no contract will be awarded from this notice, and respondents are not required to submit offers, nor will costs incurred in preparing responses be reimbursed. The anticipated contract value is estimated between $125 million and $200 million over a five-year period, including a 12-month base period and four one-year option periods extending through February 2032. Performance is expected across multiple locations including Alexandria, Virginia; Mountain View, California; and Washington, D.C., with telework permitted upon approval by the Contracting Officer’s Representative. Contractors must possess a TOP SECRET facility clearance, and all personnel assigned to classified work must hold TS/SCI clearances and be eligible for a DoD Common Access Card, with strict compliance required under NISPOM and DD Form 254. The scope of work includes comprehensive administrative, program, and acquisition support functions such as developing performance work statements, managing labor reporting via SAM.gov, human resources support aligned with AcqDemo, and sustaining security and quality assurance protocols including the submission of a Quality Management Plan and Quality Assurance Surveillance Plan. Deliverables require strict adherence to government standards, with 100% inspection thresholds for security reporting, accuracy in monthly invoicing, and timely submission of transition-in and transition-out plans. Responses must be submitted as a single capabilities statement not exceeding seven pages in Times New Roman 12-point font, electronically via email to whs.mc-alex.ad.mbx.ks@mail.mil by August 3, 2026, at 10:00 PM Eastern Time, and must include the Unique Entity Identifier and CAGE code, as well as full socioeconomic status declarations including 8(a), HUBZone, SDVOSB, WOSB, EDWOSB, and VOSB certifications. Offerors intending to subcontract must provide detailed plans specifying percentages and small business participation goals. Organizational conflicts of interest must be disclosed proactively with a mitigation plan submitted within 30 days, and any changes to key personnel require prior written approval from the Contracting Officer with evidence of equal or superior qualifications. The Government is evaluating potential

Washington Headquarters Services

POSTED

about 11 hours ago

DEADLINE

Upgrade Electrical and HVAC Components, Classrooms Near B191000

Solicitation # FA940126Q0029

The contract seeks to upgrade electrical and HVAC systems in classrooms near Building 191000 at Kirtland Air Force Base, New Mexico, under a Small Business Set Aside total designation. The solicitation, numbered FA940126Q0029 and posted on July 29, 2026, follows Revolutionary FAR Overhaul Part 12 procedures for acquiring commercial products and services, with the NAICS code 238210 assigned to electrical and HVAC contracting. All quotes and supporting documents must be submitted via the Procurement Integrated Enterprise Environment Solicitation Module by the deadline of August 28, 2026, at 10:30 PM Eastern Time; submissions outside this system will be rejected. Offerors must carefully review the full solicitation, including Sections L and M, for site visit details, quote formatting requirements, and evaluation criteria. The point of contact for inquiries is Emmanuel Cobian, reachable at 505-846-4914 or emmanuel.cobian@us.af.mil, and the work is to be performed at Kirtland AFB, NM, 87117.

FA9401 377 Msg Pk

POSTED

about 11 hours ago

DEADLINE

Safety and Hazard Management ServicesThe contract titled Safety and Hazard Management Services requires the implementation of comprehensive site safety protocols, including the conduct of thorough hazard assessments and ongoing enforcement of OSHA regulations alongside project-specific safety standards. The work is focused on ensuring full compliance with federal and local safety requirements to protect personnel and maintain operational integrity across all assigned sites. This subcontract is open for bidding with a response deadline of September 10, 2026, and falls under the NAICS code 541690 for other scientific and technical consulting services. The solicitation is issued by the state of Utah through its designated agency, with no specific location or point of contact provided, and the opportunity is accessible via the BonfireHub platform. The contract does not specify a set-aside type or organizational restrictions, leaving it open to qualified contractors regardless of size or ownership structure.

POSTED

DEADLINE

in about 1 month

Utility Coordination & Permitting AgentThe contract engages a Utility Coordination & Permitting Agent to manage all aspects of utility relocation planning, joint trench coordination, and the acquisition of required permits and easements. The agent must work closely with utility providers to align infrastructure adjustments with project timelines, ensure compliance with regulatory standards, and facilitate seamless integration of utility services without disrupting public or private operations. This role demands strong logistical coordination, technical knowledge of utility systems, and the ability to navigate permitting processes across jurisdictional boundaries. The contract is classified as a subcontract under NAICS code 541690, indicating it involves other professional, scientific, and technical services. It was posted by the River Valley Regional Commission in Georgia with a response deadline of August 31, 2026. While no specific location or point of contact is provided, the place of performance is expected to fall within the commission’s service area. The agent is responsible for end-to-end utility coordination, ensuring that all activities are properly documented, approved, and executed in alignment with regional planning goals and contractual obligations.

River Valley Regional Commission

POSTED

DEADLINE

in about 1 month

Safety and Quality Assurance Inspection ServicesThe City of Garland is seeking qualified vendors to provide independent inspection and verification services to ensure that work quality and safety compliance standards are met at the destination site. This subcontract opportunity, classified under NAICS code 541690, requires contractors to conduct thorough assessments to confirm adherence to both contractual obligations and applicable regulatory requirements. The scope centers on objective evaluation of deliverables to uphold safety protocols and quality benchmarks throughout project execution. Proposals must be submitted by August 11, 2026, with the solicitation having been posted on July 28, 2026. Interested parties are directed to the online portal for complete details and submission instructions.

City Of Garland

POSTED

DEADLINE

RIDOT: ON-CALL TRANSIT PLANNING

Solicitation # TRFP27006857

The State of Rhode Island Department of Administration’s Division of Purchases, on behalf of the Rhode Island Department of Transportation Planning Division’s Office of Transit and Capital Planning, is soliciting on-call transit planning consultant services through TRFP27006857. The consultant will be engaged to conduct planning and design-level analyses aimed at increasing transit ridership, improving the speed and frequency of transit services, and supporting economic development aligned with Rhode Island’s rapid transit network, which includes rail, ferry, and fixed-route bus corridors. Services are expected to be delivered as needed over the term of the contract, with work focused primarily within the state of Rhode Island. The solicitation was posted on July 28, 2026, and responses are due by August 25, 2026, with no set-aside provisions indicated. The primary point of contact for inquiries is M. Scott Stephens, reachable via email at michael.stephens@purchasing.ri.gov. Vendors can access the full solicitation through the RIDOT vendor bidding portal or by logging into their WebProcure account.

State of Rhode Island

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract involves providing hazardous materials compliance and labeling services to ensure all hazard warning labels and Safety Data Sheets meet the requirements of OSHA’s Hazard Communication Standard and relevant federal regulations including FIFRA, FDCA, CPSA, FHSA, and the FAA Act. The work requires meticulous adherence to regulatory standards for the accurate preparation, formatting, and documentation of chemical safety information to support safe handling, storage, and transportation of hazardous materials. The contractor must demonstrate proficiency in interpreting complex regulatory frameworks and translating them into compliant technical documentation. This is a subcontract under the Department of Defense’s Active Devices Division, with performance required at the location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. The NAICS code 541690 identifies the scope as other scientific and technical consulting services, indicating the nature of the work is specialized and professional. The contract does not specify a set-aside type, and there is no designated point of contact provided in the data, requiring bidders to utilize the official DIBBS portal for further information or submissions.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires full compliance with OSHA and federal regulations for the identification, documentation, and labeling of all hazardous materials used in or with pressure switches. This obligation applies to every stage of handling, storage, and integration of such materials, ensuring that all safety and regulatory standards are met without exception. All documentation must be accurate, up to date, and readily accessible to authorized personnel to support inspections and audits. The solicitation is issued under the NAICS code 541690 as a subcontract by the Department of Defense’s Electrical Devices Division, with performance required at FPO, 09573. Interested parties must submit responses by the deadline of August 10, 2026, and the scope of work demands strict adherence to regulatory protocols to ensure worker safety and legal compliance. Failure to meet these requirements may result in non-compliance penalties or contract termination.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA 29 CFR 1910.1200 for the labeling of all hazardous materials used in the product, ensuring that each container is properly marked with hazard warnings, product identifiers, and supplier information as mandated by the Hazard Communication Standard. It further demands the provision of up-to-date, compliant Safety Data Sheets for every hazardous component, including accurate details on chemical identity, physical and health hazards, handling precautions, emergency measures, and regulatory information. All documentation and labeling must align with current federal regulations and be readily accessible to workers and relevant authorities. This subcontract is issued under the NAICS code 541690 and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. The place of performance is specified as Chambersburg, Pennsylvania with a ZIP code of 17201-4150. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with no set-aside classification indicated. The contract does not include a designated point of contact, and all submissions must be made through the provided DIBBS portal link to ensure proper receipt and processing.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract seeks hazard communication support services to ensure full compliance with OSHA’s Hazard Communication Standard and DFARS clause 252.223-7001 for materials delivered under DLA contracts. This includes the accurate preparation and maintenance of Safety Data Sheets and proper labeling of hazardous materials to meet federal regulatory requirements, ensuring safe handling, storage, and transportation of chemical substances across the supply chain. All work must align with current regulatory frameworks and be performed to support defense logistics operations. Performance is required to be conducted in Tracy, California, with a response deadline of August 10, 2026. The contract is classified as a subcontract under NAICS code 541690, indicating it falls under other scientific and technical consulting services. The contracting activity is part of the Department of Defense’s Maritime Supply Chain organization, emphasizing the critical nature of compliance and safety in military logistics. Contractors must demonstrate expertise in hazard communication protocols and the ability to deliver timely, accurate documentation that meets both civilian and defense-specific regulatory obligations.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Material Labeling and ComplianceThe contract requires the application and verification of hazard communication labels for hazardous components within lighting assemblies, ensuring full compliance with OSHA 29 CFR 1910.1200 and DFARS 252.223-7001. This involves accurately identifying hazardous materials, affixing appropriate labels that convey chemical risks and safety instructions, and verifying that all labeling meets federal regulatory standards for workplace and defense supply chain safety. The work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is structured as a subcontract under NAICS code 541690. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026, with the contracting office under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV overseeing the requirement.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Hazardous Materials Handling & SDS ComplianceThe contract requires the provision of Safety Data Sheets and full compliance with hazardous materials handling protocols for the shipment of tires, ensuring adherence to all applicable regulations governing ozone-depleting substances. This subcontract is centered on the safe transportation and documentation of materials that may pose environmental or health risks, with strict expectations around accurate SDS preparation and regulatory alignment under federal hazardous materials standards. The performance location is specified as Port Hueneme, CA, with a response deadline of August 10, 2026, and the work falls under NAICS code 541690, indicating technical and scientific consulting services related to environmental compliance. The contracting entity is the Defense Logistics Agency under the Department of Defense, underscoring the critical nature of compliance within defense supply chain operations.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Compliance and Packaging ServicesThis contract pertains to the identification, labeling, packaging, and documentation of hazardous materials associated with cable and conduit products, ensuring full compliance with federal and military regulatory standards. The scope includes the comprehensive management of Safety Data Sheets and adherence to all applicable requirements for handling, transporting, and documenting hazardous substances throughout the supply chain. Services must align with Department of Defense protocols and national standards for hazardous materials, with an emphasis on accuracy, traceability, and regulatory integrity. The work is performed under a subcontract awarded by the Defense Logistics Agency, operating under the Department of Defense, and falls under the NAICS code 541690 for other scientific and technical consulting services. The contract was posted on July 28, 2026, with performance obligations tied to the delivery and support of military-grade cable and conduit systems. All activities must meet stringent military specifications, and the contractor is responsible for maintaining documented, auditable processes that guarantee compliance throughout the product lifecycle.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract involves the preparation and submission of hazard warning labels and Safety Data Sheets for fuse cartridges classified as hazardous materials, requiring precise adherence to regulatory standards. It includes expert consultation on compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement, ensuring all documentation meets federal requirements for defense-related hazardous goods. The work must be performed in alignment with OSHA HCS and DFARS to support safe handling, storage, and transport of these materials within the defense supply chain. The solicitation is issued as a subcontract under NAICS code 541690 by the Maritime Supply Chain ESOC Buys office of the Department of Defense, with performance required at Fort Eustis, Virginia, zip code 23604-5577. Proposals must be submitted by August 10, 2026, following the posting date of July 28, 2026. The contractor is expected to deliver accurate, compliant documentation tailored to the specific hazards of fuse cartridges, supporting regulatory transparency and operational safety for Defense Department logistics and usage.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Hazard Communication & Labeling Compliance (HCS 29 CFR 1910.1200)The contract requires the development and application of hazard communication labels in full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200), specifically for electronic components. This includes the authoring of safety data sheets and the rigorous verification of labels to ensure accurate depiction of chemical hazards, precautionary statements, and pictograms as mandated by federal regulations. All deliverables must meet strict regulatory standards to support safe handling, storage, and transportation of hazardous materials within the supply chain. The work is scoped as a subcontract under the Department of Defense’s Fluid Handling Division, with performance expected to occur in Tracy, California, at the specified zip code. The NAICS code 541690 indicates the focus is on other scientific and technical consulting services, aligning with specialized compliance and documentation tasks. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, requiring timely submission of technical and compliance documentation to fulfill contractual obligations.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the development and submission of hazard warning labels for approval before a contract award is made, with strict adherence to federal regulations including OSHA 29 CFR 1910.1200 for workplace hazard communication, DFARS 252.223-7001 for defense acquisition compliance, and additional statutes such as FIFRA and the FDCA for pesticide and food product labeling requirements. All labels must meet the precise technical and formatting standards mandated by these statutes to ensure accurate hazard identification, risk communication, and regulatory alignment across federal domains. Submission deadlines and approval processes are critical to qualification, with non-compliance potentially disqualifying respondents. The opportunity is structured as a subcontract under NAICS code 541690, targeting specialized compliance and labeling services, with performance tied to Hill Air Force Base in Utah, 84056-5734. The solicitation was posted on July 28, 2026, with responses due by August 5, 2026, indicating a short turnaround window for technical submissions. While no specific set-aside classification is designated, the involvement of the Department of Defense and Hill AFB suggests this supports military logistics or supply chain safety operations. Prospective contractors must demonstrate expertise in hazardous materials labeling under layered federal mandates and be prepared to submit samples or prototypes for review prior to any contractual obligation.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE