Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Wilkinson Manufacturing Company 12th and Madison Fort Calhoun, NE 68023

UEI: SLED_B5C41660D10EFEB3

Wilkinson Manufacturing Company 12th and Madison Fort Calhoun, NE 68023 is a federal contractor, registered under UEI SLED_B5C41660D10EFEB3. It has been awarded $1,489,750 in federal contracts. Primary work spans Ammunition (except Small Arms) Manufacturing. Top awarding agencies include Department Of Defense.

Contact Information

Registration and classification details

Registration

UEI Code

SLED_B5C41660D10EFEB3

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

AI Capability Profile

Wilkinson Manufacturing Company provides specialized manufacturing services under NAICS 332993. The company has experience supporting the Department of Defense. The firm focuses on the miscellaneous fabricated metal product manufacturing industry. Wilkinson Manufacturing Company is located in For...

Key Performance Metrics

Awards Count

1

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

Department Of Defense$1.5M100%

Awards by NAICS

332993 - Ammunition (except Small Arms) Manufacturing$1.5M100%

Awards by Agency Over Time

Awards by Place of Performance

Compete with Wilkinson Manufacturing Company 12th and Madison Fort Calhoun, NE 68023

Track the contractors you bid against, and the work they win

Award history, agency mix, and NAICS coverage for Wilkinson Manufacturing Company 12th and Madison Fort Calhoun, NE 68023

AI-powered matching against your own capabilities and past performance

Teaming and subcontracting signals on every award

Automated alerts when a competitor wins in your market

Join 750+ contractors already using CLEATUS

Open opportunities in Wilkinson Manufacturing Company 12th and Madison Fort Calhoun, NE 68023's top NAICS codes and agencies

GOCO Industry Day

Solicitation # (blank)

Army Contracting Command-Rock Island, acting for the Portfolio Acquisition Executive Agile Sustainment and Ammunition and Army Sustainment Command, is hosting an Industry Day from November 17-19, 2026, at the Lindner Conference Center in Picatinny, New Jersey. The event aims to gather input from traditional and non-traditional defense contractors to transform the operational strategy of Government Owned Contractor Operated (GOCO) Army ammunition plants. The government seeks a commercially disciplined operating model that grants contractors greater flexibility and responsibility for facility management, modernization, and workforce development while maintaining government mission priorities and accountability. Additionally, the event will provide updates and seek solutions for the long-term self-sustainability of the Blue Grass Army Depot Energetics Center of Excellence. The three-day schedule includes a general open forum on November 17, followed by one-on-one engagements on November 18 and 19 for interested parties. Registration must be submitted via email by October 30, 2026, and include company details, registrant citizenship, and specific topics for requested one-on-one meetings. The government is specifically interested in feedback regarding risk allocation, demand and capacity management, the integration of commercial workload, and the use of digital manufacturing and automation. This initiative follows an assessment of existing GOCO facilities, such as the Holston, Lake City, Radford, and Scranton Army Ammunition Plants, to ensure the organic industrial base can meet future requirements for safety, responsiveness, and supply-chain resilience.

POSTED

about 20 hours ago

DEADLINE

in about 21 hours

Precision Metal Fabrication - Ammunition Holder (NSN: 1398-01-330-9529)This small business set-aside subcontract involves the full-scale production and manufacturing of Ammunition Holders, part number 12916856, for prime contractors supporting Army Contracting Command-Detroit Arsenal projects. The selected provider will be responsible for manufacturing three units, with the possibility of additional options, utilizing CNC machining, welding, or forming in strict accordance with the provided Technical Data Package. To qualify, contractors must maintain a certified Quality Management System, specifically ISO 9001 or AS9100 certification, and must possess JCP registration and DD 2345 authorization. The scope of work includes the execution of First Article Testing to ensure all components meet the rigorous standards required by the Department of Defense.

POSTED

DEADLINE

Sources Sought for Market Research, Holder, Ammunition NSN: 1398-01-330-9529

Solicitation # W912CH-27-Q-A004

The Army Contracting Command-Detroit Arsenal (ACC-DTA) has issued Sources Sought Notice W912CH-27-Q-A004 to conduct market research for the production of Ammunition Holders (NSN: 1398-01-330-9529, Part No: 12916856). This is not a formal solicitation for proposals but a planning effort to determine the capabilities and interest of both small and large businesses. The estimated quantity is 3 units with a 100 percent option. The effort is categorized under NAICS code 332993 and is designated as a Total Small Business Set Aside. Interested respondents must submit a completed survey to Haley Bruns by October 29, 2026. The submission must include a vendor profile, details on quality management systems, production lead times, and unit pricing. Access to the associated Technical Data Package (TDP) is restricted to Department of Defense contractors with a current DD 2345 certification on file with the Defense Logistics Information Service and active registration in the Joint Certification Program. First Article Testing is required for this procurement. All proprietary information submitted must be clearly marked as confidential to be protected under 18 USC 1905.

POSTED

DEADLINE

TEST STAND, TORPEDO, WAR

Solicitation # SPE7M4-27-T-1136

Solicitation SPE7M4-27-T-1136 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 32 units of a Torpedo Warshot Test Stand, identified by NSN 4921017264731. This acquisition is a total small business set-aside under NAICS code 332993. The contract requires adherence to specific technical data packages and reference drawings dated between 2018 and 2020. Key delivery milestones include a need ship date of April 6, 2027, and an original required delivery date of October 15, 2027, with a delivery period of 164 days after order. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must comply with rigorous packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List technical and quality requirements take precedence. Special restrictions prohibit the use of Class I ozone-depleting chemicals and mandate compliance with the Buy American Act and the Berry Amendment. Hazardous materials must be labeled according to the Hazard Communication Standard, and the successful offeror must provide Safety Data Sheets prior to award. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and safeguarding covered defense information per DFARS 252.204-7012. All quotes must be submitted electronically via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

COUPLING HALF, QUICK DI

Solicitation # SPE7M3-27-T-0306

Solicitation SPE7M3-27-T-0306 is a request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 524 units of Quick Disconnect Coupling Halves, identified as a critical application commercial item. The requirement specifies Parker-Hannifin Corporation part number B32E and NSN 4730-01-115-9760. The original required delivery date is March 31, 2027, with a need ship date of April 6, 2027. Delivery is set as FOB Destination, with the freight and parcel shipping address located at DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to quality and packaging standards, requiring compliance with ASTM D3951 and MIL-STD-129 for marking and labeling, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 requirements. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation is governed by NAICS code 332993 and incorporates various FAR and DFARS clauses, including the Buy American Act and specific cybersecurity reporting requirements under DFARS 252.204-7012. All quotes must be submitted via the DIBBS portal by October 23, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Vehicle Recompete: THIS PROCUREMENT IS FOR THE MANUFACTURE, TEST, PACKAGING, AND DELIVERY OF… — INDEFINITE DELIVERY / INDEFINITE QUANTITY W15QKN22R0008This Department of the Army indefinite delivery, indefinite quantity contract covers the manufacture, testing, packaging, and delivery of 155mm M1128 artillery metal parts assemblies, which serve as high explosive carriers. The vehicle is a full recompete with an ordering period extending through April 12, 2028. Currently, there are seven active task orders with a combined total value of over 418 million dollars. The contract is split between two primary incumbents, General Dynamics Ordnance and Tactical Systems Inc and IMT Defense Corp, who hold awards valued at approximately 211 million and 206 million dollars respectively. A significant portion of the contract value is dedicated to supporting the conflict in Ukraine and replenishing Army stockpiles, including a major order for over 151,000 metal parts. Other key activities include the production of projectile metal parts, base closures, and initial first article testing.

Department of the Army

POSTED

DEADLINE

Nose Plug and Support Cup

Solicitation # W519TC-25-R-NPSC

The Army Contracting Command - Rock Island is conducting market research to identify capable sources for the production and delivery of Nose Plugs and Support Cups used in MK80 General Purpose bombs. The government anticipates an annual requirement of 20,000 to 30,000 units for each item. Manufacturing these components requires specific expertise in forging, heat-treating, machining, cleaning, and coating. Interested vendors must demonstrate their technical capabilities, production capacity, and provide rough order of magnitude pricing for fiscal years 2027 through 2031. Future solicitations resulting from this research will be managed through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module, and offerors are encouraged to register early to avoid delays. Because the Technical Data Packages are classified as Distribution D, vendors must be registered with the U.S./Canada Joint Certification Program and have a SAM.gov account to access the drawings. This notice is for planning purposes only and does not constitute a request for proposal or a binding contract.

POSTED

DEADLINE

in about 14 hours

Solicitation # SPE7M4-27-T-0328

Solicitation SPE7M4-27-T-0328 is issued by the DLA Weapons Support Fluid Handling Division for the procurement of two cycle timers, identified by NSN 4921010293014. The contract requires delivery to DLA Distribution San Joaquin in Tracy, California, with a need ship date of April 3, 2027, and an original required delivery date of October 31, 2027. Delivery is specified as FOB Origin with a delivery window of 165 days. Inspection and acceptance will occur at the destination. The procurement is subject to several technical and quality standards, including CMMC Level 2 Self-Assessment, Covered Defense Information requirements, and a strict prohibition on Class I ozone-depleting chemicals. Packaging must adhere to ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment. This buy is identified as a candidate for automated award, and offerors are encouraged to submit quantity ranges via DIBBS.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

155mm Modular Artillery for Combat Effectiveness (MACE)

Solicitation # W15QKN26R1C5R

The 155mm Modular Artillery for Combat Effectiveness (MACE) program is a solicitation issued by the U.S. Army Contracting Command Rock Island at Picatinny to develop a manufacturable cargo-carrying artillery projectile system. This effort is being conducted via a Prototype Other Transaction Agreement (OTA) under 10 U.S.C. 4022, with the government intending to award up to two agreements. The project is divided into two phases: Phase I focuses on projectiles with a range of 30 to 35 km, while Phase II targets ranges beyond 35 km. The ultimate goal is to support a Milestone C production decision by the fourth quarter of FY29, with potential follow-on production of up to 10,000 systems per year. The procurement process has been refined through several amendments, most notably Amendment 0005, which corrected schedule discrepancies by aligning milestones to relative durations after award and updating the Statement of Work and CLIN Matrix. Proposals are due by October 30, 2026, and must be submitted via SAM.gov in four distinct volumes. Evaluation is based on schedule and technical merit, with schedule being the primary factor for Phase I and technical capability being the primary factor for Phase II, alongside cost and price. Technical requirements specify compatibility with M777A2 and M109A7 39-caliber weapon platforms, as well as legacy propellant systems. Deliverables include various quantities of engineering, safety, and soldier testing projectiles, as well as critical design reviews and technical reports. Due to the sensitive nature of the technology, offerors must comply with strict non-disclosure agreements and provide specific certifications, including Business Status Certifications and DD2345 Military Critical Technical Data Agreements, to access controlled technical data. All materials must adhere to the Buy America Act and International Standards for Phytosanitary Measures for wood packaging.

W6QK Acc-Ri-Picatinny

POSTED

DEADLINE

ARMY AMMUNITION MANUFACTURING INNOVATION INDUSTRIAL BASE INTEGRATION TEAM COMMERCIAL SOLUTIONS OPENING REQUEST FOR SOLUTIONS

Solicitation # AMIP-CSO

The Army Ammunition Manufacturing Innovation Industrial Base Integration Team is soliciting innovative commercial solutions through a Commercial Solutions Opening to modernize ammunition manufacturing capabilities. The primary objective is to integrate advanced technologies such as additive manufacturing, robotics, artificial intelligence, and digital twins to create a more agile, resilient, and sustainable industrial base. Key focus areas include accelerating technology adoption, leveraging IoT and digital twins for predictive maintenance, and improving supply chain transparency and workforce capabilities, all while ensuring strict compliance with DoD cybersecurity and readiness standards. Managed by the Joint Program Executive Office for Armaments and Ammunition, this solicitation allows for awards via fixed-price contracts or Other Transaction Agreements, with typical periods of performance ranging from two to five years and funding intended for Fiscal Year 2026. The selection process is phased, beginning with the continuous submission of unclassified white papers and quad charts, followed by pitch sessions and formal technical and price proposals. Evaluation is based on a peer or scientific review focusing on return on investment, technical merit, availability of funds, and private investment. Large business offerors are required to provide detailed subcontracting plans for various small business categories.

POSTED

DEADLINE

RFB-758-2700000075-1 | Ammunition and Munitions

Solicitation # RFB 758 2700000075

The Commonwealth of Kentucky Office of Procurement Services has issued solicitation RFB 758 2700000075 to establish a Master Agreement for the procurement of ammunition and munitions. This procurement encompasses a variety of items, including firearms, ammunition, chemical irritants, and non-lethal training ammunition. Bids must be submitted electronically through the Kentucky Vendor Self-Service portal. While a nominal value of $.01 is entered into the eProcurement system for submission purposes, all actual pricing must be detailed on the provided Bid Sheet. The solicitation was originally posted on September 25, 2026, with a response deadline initially set for October 14, 2026. However, Modification 2 extended the closing date to October 19, 2026, at 1:30 PM ET. This modification also updated insurance requirements and provided responses to vendor inquiries via Addendum 1. The primary point of contact for this effort is Nathan Durham.

Office of Procurement Services

POSTED

DEADLINE

13--RING,CLAMPING

Solicitation # N0010425QNC18

Solicitation N00104-25-Q-NC18 is a total small business set-aside for the procurement of three clamping rings (NSN 1350-01-671-1961) for the Department of Defense, specifically NAVSUP Weapon Systems Support. The requirement is issued under Emergency Acquisition Flexibilities and carries a DO priority rating for national defense. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. The resultant contract will be issued bilaterally, requiring written acceptance from the contractor. Technical requirements mandate that the items meet the specifications of drawing 6964634, cage 53711, and be physically identified per MIL-STD-130. The contractor must maintain an ISO 9001 quality system and adhere to strict mercury-free material requirements for use on submarines and surface ships. Quality assurance includes mandatory non-destructive First Article Testing (FAT) and Production Lot Testing, with one unit of each delivered to Naval Station Newport for government approval. Supplies must be preserved and marked according to MIL-STD-2073-1 and MIL-STD-129, including specific blue and yellow DLR labels for applicable items. The solicitation has undergone multiple amendments, extending the quote due date several times, with the most recent updates shifting the point of contact to Zachary R. Morrill. Payment will be processed through Wide Area Workflow (WAWF) using combined invoice and receiving reports. The contractor is granted a one-year warranty from the date of delivery for these non-complex supplies.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # W519TC-27-R-AM82

The Army Contracting Command Rock Island is seeking proposals for the supply of M82 Energetics Parts, specifically Booster Bursters, Delay Assemblies, and Slider Assemblies, to support the M82 Program at Pine Bluff Arsenal. This anticipated procurement will be a five year, firm fixed price, indefinite delivery indefinite quantity contract awarded to the responsive and responsible lowest priced technically acceptable proposal. Estimated quantities over the life of the contract range from a minimum of 65,000 units to a maximum of 90,000 units for each primary component, including corresponding first article testing units. The minimum guarantee will be obligated through the first delivery order issued alongside the base contract. This opportunity is open for competition with no specific set aside.

POSTED

DEADLINE

Vehicle Recompete: M734A1/M783 Fuzes — IDIQ M734A1/M783 FuzesThis Department of Defense indefinite delivery, indefinite quantity contract covers the manufacture and delivery of M734A1 Multi-Option Fuze for Mortars and M783 PD/Dly fuzes. These components are designed for use with 60mm, 81mm, and 120mm high explosive cartridges, as well as 60mm and 120mm white phosphorous smoke cartridges. The contract has an overall ceiling value of 223,842,949.01 dollars and is scheduled to remain active through March 20, 2028. L3Harris Fuzing and Ordnance Systems, Inc. is the sole incumbent, holding five orders totaling over 185 million dollars. The largest individual task orders focus on the direct purchase and manufacture of the M734A1 and M783 fuzes, including assembly, testing, inspection, and packaging. This vehicle is classified as a full recompete and was not subject to any specific set-aside requirements.

Department of Defense

POSTED

DEADLINE

Precision Aerospace Bearing ManufacturingThe Precision Aerospace Bearing Manufacturing subcontract, issued by the Defense Logistics Agency under the Department of Defense, focuses on the production of high-precision ball annular bearings for aerospace use. The scope of work encompasses the entire production lifecycle, starting from raw material sourcing through to final assembly, ensuring all components meet rigorous military and AS9100 quality standards. Classified under NAICS code 332993, this agreement ensures the delivery of critical aerospace components that adhere to strict defense specifications. The contract was posted on August 17, 2026, and is managed through the DLA's procurement systems to support high-precision engineering requirements for military aviation.

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Precision Manufacturing of Fuel Atomizer AssemblyThis subcontract with the Defense Logistics Agency under the Department of Defense involves the precision manufacturing of seven fuel atomizer assembly units, identified by part number 2910004929419. The scope of work requires the contractor to perform CNC machining, assembly, and rigorous quality control inspections to ensure all units meet strict military specifications before final packaging and delivery. The project falls under NAICS code 332993 and is managed through the Defense Logistics Agency. Key deliverables include the completed assemblies and the associated inspection documentation necessary to verify compliance with the technical requirements of the fuel atomizer system.

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Roller Bearing Supply – Airframe NSN 3110-00-585-1253This subcontract with the Defense Logistics Agency involves the supply of 675 roller bearings designed for airframe applications. The components must adhere to MIL-DTL-197M specifications and are identified by National Stock Number 3110-00-585-1253. The contract is categorized under NAICS code 332993 and requires delivery FOB Destination to DLA depots within the continental United States. The agreement was posted on August 17, 2026, under the Department of Defense.

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Precision Manufacturing of Servovalve Crank (C5787-17)This subcontract with the Defense Logistics Agency under the Department of Defense involves the precision manufacturing of a high-precision mechanical crank component, identified by NSN 1650-00-377-7085 and Part Number C5787-17. The component is designed for use in servovalve systems and must strictly adhere to military and aerospace tolerances to ensure operational reliability. The contract falls under NAICS code 332993 and was posted on August 17, 2026. All production requirements are managed through the Defense Logistics Agency to support critical hardware needs within the Department of Defense.

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE