Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

RFB-758-2700000075-1 | Ammunition and Munitions

Active
RFB-758-2700000075-1State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation RFB-758-2700000075-1 is issued by the Kentucky Office of Procurement Services for the procurement of ammunition and munitions under NAICS code 332993. The solicitation was posted on September 25, 2026, with a response deadline of October 14, 2026. All bids must be submitted electronically through the Kentucky Vendor Self-Service portal. For construction-related components, bidders must enter zero dollars in the portal's contract amount field and instead upload the actual lump sum bid amount and any alternates via the official bid document attachment. The contract is governed by the Kentucky Division of Engineering and Contract Administration general conditions for design-build projects. Key requirements include the provision of performance and payment bonds, a potential 5 percent bid bond, and comprehensive insurance coverage. The design builder is responsible for maintaining competent supervisory personnel, adhering to state and federal OSHA regulations, and coordinating electrical inspections with a 72 hour notice period. Additionally, the contract mandates compliance with the Kentucky Equal Employment Act of 1978 and requires the payment of prevailing hourly wages unless specific exemptions apply. Contractors must immediately report any hazardous materials encountered on site to the owner and architect.

General Info

Kentucky Office of Procurement Services solicitation for ammunition and munitions due October 14, 2026.

Documents

(10)

How to Submit an Online Response Through Kentucky Vendor Self-Service (VSS)

DOWNLOAD•7 pages•special-notice

Kentucky DECA General Conditions - Design Builder

DOWNLOAD•sow

AASF_Utilities.pdf

PDF

BNGC AC MAINT HGR BC218 Phase 2 As Builts.pdf

PDF

BNGC AC MAINT HGR BC218 Solar Phase I Plans.pdf

PDF

BNGC BC218 Electric Bill.pdf

PDF

BNGC BC218 PVWatts Calculator 234KW DC.pdf

PDF

Final_RFB_758_2700000075_1_SO_FORM.PDF

PDF

Final_RFP_785_2700000075_1_SO_FORM.PDF

PDF

REQUEST FOR PROPOSAL.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyKentucky → Office of Procurement Services
Contacts2 people available
OfficeOther, KY, USA
Office AddressOther, KY, USA
Contacts
Office of Procurement Services

Full Description

Show more
Ammunition and Munitions

Similar Contracts

Same NAICS industry code

NAICS: 332993
New
Federal
M82 and M82A1 Percussion Primers
Solicitation # W519TC-25-R-0016
The Army Contracting Command - Rock Island is soliciting proposals under W519TC-25-R-0016 for the manufacture and delivery of M82 and M82A1 Percussion Primers. The government intends to award two Indefinite-Delivery, Indefinite-Quantity (IDIQ) contracts featuring five twelve-month ordering periods. The pricing structure consists of a Firm Fixed Price for the first ordering period and Fixed Price with Economic Price Adjustment for subsequent periods. This acquisition is restricted to the United States, its outlying areas, and Canada, utilizing a Best Value Tradeoff source selection process where non-priced factors—specifically production capability, quality systems, and management systems—are significantly more important than price. The scope of work encompasses all material processing, assembly, testing, and storage, with a required minimum production rate of 20,000 M82A1 primers per month and a maximum capacity of 115,417 units per month. Due to the nature of the items, the contract involves hazardous materials and requires strict adherence to physical security standards for Arms, Ammunition, and Explosives. Contractors must implement a comprehensive Operations Security (OPSEC) program and maintain ISO 9001 or equivalent quality standards. Technical data is classified as Distribution D, requiring registration with the U.S./Canada Joint Certification Office for access. Proposals must be submitted in four distinct volumes covering technical factors, past performance, price, and small business participation by the final deadline of September 29, 2026.
W6QK Acc-Ri

POSTED

about 10 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332993
New
Federal
155mm Modular Artillery for Combat Effectiveness (MACE)
Solicitation # W15QKN26R1C5R
The 155mm Modular Artillery for Combat Effectiveness (MACE) program is a prototype project issued by the Army Contracting Command-Rock Island at Picatinny under the authority of 10 U.S.C. § 4022. The objective is to develop and qualify 155mm cargo-carrying artillery projectile prototypes featuring interchangeable lethal and non-lethal payload capabilities. These projectiles must be compatible with M777A2 and M109A7 howitzers, deliver effects at ranges of 30 km to 35 km when fired from 39-caliber systems, and maintain a standard interface for existing qualified fuzes. The government intends to award up to two Other Transaction Agreements (OTAs) to performers capable of establishing a resilient, scalable domestic manufacturing base. The project is structured in two phases, with Phase I focusing primarily on schedule and Phase II emphasizing technical performance. Key deliverables include the production of up to 115 projectiles for engineering tests, 335 for limited safety tests, and up to 1,200 IPB prototypes. To be eligible, at least one nontraditional defense contractor or nonprofit research institution must participate significantly, and at least one third of the total project cost must be funded by non-federal sources. Proposals are due by October 30, 2026, and must be submitted via SAM.gov in specific volumes, with strict page limits and formatting requirements. Access to sensitive technical data packages requires the submission of a non-disclosure agreement, a technical data request questionnaire, and a military critical technical data agreement.
W6QK Acc-Ri-Picatinny

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332993
Federal
Indo-PACOM Recoilless Precision Rifle (RePR-G7) Rocket Propelled Grenade Launcher & Anti-Tank Weapon Simulator Systems
Solicitation # PANORL-26-P-0000-027671
The U.S. Army Contracting Command Aberdeen Proving Ground Orlando Division is conducting market research via a Sources Sought Notice for the procurement of 17 Recoilless Precision Rifle (RePR-G7) Anti-Tank Weapon Simulator Systems. This turnkey solution is designed to enhance the operational readiness of an Indo-PACOM partner's littoral and amphibious security forces under the Joint Littoral Security Force Integration program. The requirement specifically mandates physical, field-deployable hardware that replicates the exact form, fit, weight, and operational sequence of the active system, explicitly excluding VR, AR, or software-only solutions. Beyond hardware, the contract includes the deployment of mobile training teams to provide OCONUS operational and technical training to approximately 15 recipient force structures. Additionally, the contractor must provide professional military translation services from English to Traditional Chinese for all manuals, software interfaces, and safety guidelines. The project is expected to be delivered in late FY28, with security classifications not exceeding Controlled Unclassified Information. Compliance with specialty metals restrictions under DFARS 252.225-7008 and 252.225-7009 is required. The government is currently evaluating potential contract vehicles, including GSA MAS or open-market commercial RFQs, and is considering various small business set-aside categories under NAICS codes 332993 and 333318.
W6QK Acc-Apg-Orlando

POSTED

8 days ago

DEADLINE

in 6 days
View Details
NAICS: 332993
Federal
BLU-138/B Fuze System
Solicitation # FA821326RA5KF
The Air Force Life Cycle Management Center Armament Directorate is conducting market research via a sources sought notice to identify qualified contractors for the procurement of the BLU-138/B Fuze System. This system is critical for the 5,000-pound class conventional penetrating weapon used to defeat very hard and deeply buried targets. The scope of work includes the production of the MLU-68 Forward Assembly Initiator Unit, FSU-32/B Electronic Safe and Arm Module, FZU-60/B Bomb Fuze Initiator, high-reliability interconnect system cabling, and M548 ammo cans with custom damping inserts. The government is specifically seeking feedback on the feasibility of a small business set-aside under NAICS 332993 and is considering an Indefinite Delivery Indefinite Quantity (IDIQ) contract structure. Potential providers must demonstrate the ability to independently generate a Technical Data Package and ensure all hardware is qualified according to MIL-STD-1316 for fuze design safety and MIL-STD-331 for environmental and performance tests. Additionally, contractors must maintain ISO 9001 or AS9100 quality assurance certifications and implement proactive dimenishing manufacturing sources and material shortages (DMSMS) management for critical electronic components. Interested parties must submit a capability statement by October 15, 2026, detailing their socioeconomic status, relevant experience within the last three years, and any foreign ownership or involvement. Small business prime contractors are reminded that they must perform at least 50 percent of the work in accordance with FAR 52.219-14.
FA8213 Aflcmc Ebhk

POSTED

11 days ago

DEADLINE

in 20 days
View Details
NAICS: 332993
Federal
FMU-167/B Hard Target Void Sensing Fuze (HTVSF) System
Solicitation # FA821326FMU167
The Air Force Life Cycle Management Center Armament Directorate is conducting market research to identify qualified sources for the manufacture, assembly, testing, and delivery of the FMU-167/B Hard Target Void Sensing Fuze (HTVSF) system. This effort, categorized under NAICS 332993, aims to determine market competitiveness and the feasibility of a small business set-aside. The required system must be capable of penetrating reinforced concrete or multiple soil layers and include void sensing, time delay, and backup timer functions selectable via cockpit mission planning systems. Key deliverables include the FMU-167 fuze, FZU-60/B bomb fuze initiator, JDAM adapter cabling, and M548 ammo cans for shipping and storage. Because the government does not possess the proprietary Technical Data Package from Northrop Grumman, potential contractors must demonstrate the ability to independently develop and qualify an equivalent system. Technical requirements include a minimum production capacity of 3,000 units per year, adherence to MIL-STD-1316 and MIL-STD-331 standards, and ISO 9001 or AS9100 quality certification. Interested parties must submit a capability statement by October 15, 2026, detailing their technical approach, production capacity, and supply chain management strategies. Small business prime contractors are expected to perform at least 50 percent of the manufacturing cost, excluding materials.
FA8213 Aflcmc Ebhk

POSTED

11 days ago

DEADLINE

in 20 days
View Details

More opportunities from Kentucky → Office of Procurement Services

Same awarding agency

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS