This Subcontract opportunity from Georgia was posted on June 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Pump Tubing Supply for Avalanche Sampler (5800/4700/6700 Series)

Closed

State & Local

Submission Closed06/30/2026, 03:50:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332993

New

Federal

155mm Modular Artillery for Combat Effectiveness (MACE)

Solicitation # W15QKN26R1C5R

The 155mm Modular Artillery for Combat Effectiveness (MACE) program is a Department of Defense initiative managed by the Army Contracting Command Rock Island at Picatinny. The program seeks to award up to two prototype Other Transaction Agreements under 10 U.S.C. 4022 to develop manufacturable, cargo-carrying 155mm artillery projectiles with interchangeable payload capabilities. The project is structured in two phases: Phase I focuses on achieving ranges of 30 to 35 kilometers, while Phase II targets ranges exceeding 35 kilometers. The ultimate goal is to establish a resilient domestic manufacturing base to support a Milestone C production decision by the fourth quarter of fiscal year 2029, with potential follow-on production of up to 10,000 systems per year. The procurement process has undergone several amendments to refine technical requirements, align schedules, and clarify submission procedures. Key updates include the extension of the proposal deadline to November 30, 2026, and the formal correction of the submission portal from SAM.gov to the Procurement Integrated Enterprise Environment (PIEE) Proposal Manager Module. Evaluation for award is based on technical capability, cost, and schedule, with schedule being the most critical factor for Phase I and technical merit being the most critical for Phase II. Proposals must be submitted in four distinct volumes, strictly adhering to page limits and formatting guidelines, and must include detailed cost-plus-fixed-fee pricing for all specified Contract Line Item Numbers.

W6QK Acc-Ri-Picatinny

POSTED

DEADLINE

Next Generation Penetrator Development through Production

Solicitation # NGP_DtP

POSTED

DEADLINE

Aerospace/Defense Grade Metallic Tubing SupplyThis subcontract involves the supply of aerospace and defense grade raw metallic tubing stock for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The provider must ensure all materials strictly adhere to the composition and grade specifications outlined in Drawing 97499 212-040-240 and are delivered free from Class I ozone-depleting chemical treatments. To maintain quality and regulatory standards, the supplier is required to provide comprehensive Material Test Reports and certifications of compliance. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 332993, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # W519TC-27-R-A003

Army Contracting Command - Rock Island has issued solicitation W519TC-27-R-A003 for the production, inspection, packaging, and delivery of energetic components for the M82 Simulant Screening Grenade program in support of Pine Bluff Arsenal. The scope of work includes the delivery of Booster-Burster, Delay, and Slider assemblies, along with associated First Article Testing and Contract Data Requirements List deliverables. This firm fixed price contract will be awarded using a Lowest Priced Technically Acceptable process, where proposals are evaluated on technical capability, past performance, and price. Technical evaluations focus on production capability, quality systems, program management, and delivery schedules, with a requirement for contractors to maintain ISO 9001:2015 certification. Proposals must be submitted electronically by December 18, 2026, at 3:00 PM CST, organized into five distinct volumes including a technical factor, past performance, and a price matrix submitted in Microsoft Excel format. All components must adhere to strict military packaging and marking standards, including MIL-STD-129 and MIL-STD-130, with specific requirements for moisture protection and weight limits. Delivery timelines range from 90 to 120 calendar days depending on the line item and the trigger event, such as First Article Test approval or the exercise of an option. Interested offerors must be registered in the System for Award Management and obtain a certified DD Form 2345 to access the necessary Technical Data Packages.

POSTED

DEADLINE

Demolition Kit, Bangalore Torpedo M1A2

Solicitation # W8703-270117/A

The Department of National Defence is soliciting offers for the procurement of Demolition Kit, Bangalore Torpedo M1A2, a specialized explosive charge used by combat engineers to breach barbed wire and clear anti-personnel mines. The requirement consists of a firm quantity of 528 units, split equally between the Canadian Forces Ammunition Depot (CFAD) Dundurn and CFAD Angus, with delivery required by November 1, 2028. Additionally, there is an unfunded optional quantity of 264 units for delivery between September and November 2031. Each kit must include 10 high-explosive tube assemblies, 10 connecting sleeves, and one nose sleeve, all designed and tested in accordance with MIL-DTL-2087E and delivered Delivered Duty Paid (DDP). The contract will be awarded to the compliant offer with the lowest evaluated price, based on a pass/fail technical evaluation of mandatory criteria. Bidders must certify that materials are new and asbestos-free, and they must comply with the Controlled Goods Program and ISO 9001:2015 quality standards. Key requirements include the provision of bilingual Safety Data Sheets, adherence to Transport Canada and UN Model Regulations for dangerous goods, and the acquisition of US DOT EX numbers if applicable. Proposals must be submitted in English or French by December 1, 2026, and must include a separate financial proposal in Canadian dollars.

Department of National Defence

POSTED

DEADLINE

Manufacturing of Safety Switch Assembly (Critical Gun Part)This subcontract involves the manufacture and supply of six Safety Switch Assemblies, identified by NSN 1015012367371, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires precision CNC machining and assembly of the safety switch mechanism using military-grade materials to meet critical gun part specifications. To ensure quality and compliance, the provider must execute First Article Testing to validate all production units. The project is managed under the Department of Defense and is categorized under NAICS code 332993. Performance of the contract will take place in Tracy, California. Interested parties should note the response deadline of November 16, 2026, for this specific procurement effort.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Austempered Ductile Iron (ADI) 5 Inch Projectile Bodies

Solicitation # N00174-26-RFPREQ-W71-0026

The Naval Surface Warfare Center, Indian Head Division intends to award a sole source, firm-fixed-price contract to Northrop Grumman Systems Corporation for the development and production of Austempered Ductile Iron 5 Inch Projectile Bodies compatible with the MK 45 Gun Weapon System. This acquisition falls under NAICS code 332993 and is being pursued without further competition because Northrop Grumman successfully completed the preceding prototype projects and qualification tasks under a previous Other Transaction Agreement. This notice serves as an intent to proceed with a follow-on production contract under the statutory authority of 10 USC 4022(f)(1) and is not a formal request for proposals. Interested parties may submit company capabilities and administrative information to Contract Specialist Sean McAvoy by November 18, 2026. The government maintains full discretion over the final acquisition approach and is not obligated to notify respondents of the survey results.

Nswc Indian Head Division

POSTED

DEADLINE

Request for Information: Extended Range Attack Munition Glide

Solicitation # FA865927W0003

The Department of the Air Force is issuing a Request for Information for the Extended Range Attack Munition Glide project. This is the first step of a two-step competitive process under Other Transaction Authority, where the government will evaluate capability papers to select eligible offerors for a subsequent request for Commercial Solutions Proposals. Interested parties must be registered in the System for Award Management and meet specific eligibility criteria, such as being a small business, a nontraditional defense contractor, or providing significant cost-sharing. Technical requirements for the munition include a 500lb class weapon with approximately 105lbs of explosives, a glide ratio of at least 10:1, and a navigation system utilizing M-Code GPS with a CRPA antenna for degraded environments. The successful contractor must be able to obtain a Top Secret/SCI Facility Clearance and deliver the capability at TRL 7/MRL 8 within 14 months of award. Statements of Capabilities must be submitted via email to the Air Force Material Command at Eglin Air Force Base no later than December 2, 2026.

Department Of The Air Force

POSTED

DEADLINE

Synopsis for Holder, Ammunition NSN: 1398-01-330-9529

Solicitation # W912CH-27-Q-A004

The Army Contracting Command-Detroit Arsenal (ACC-DTA) has issued Sources Sought Notice W912CH-27-Q-A004 to conduct market research for the production of Ammunition Holders (NSN: 1398-01-330-9529, Part No: 12916856). This is not a formal solicitation for proposals but a planning effort to determine the capabilities and interest of both small and large businesses. The estimated quantity is 3 units with a 100 percent option. The effort is categorized under NAICS code 332993 and is designated as a Total Small Business Set Aside. Interested respondents must submit a completed survey to Haley Bruns by October 29, 2026. The submission must include a vendor profile, details on quality management systems, production lead times, and unit pricing. Access to the associated Technical Data Package (TDP) is restricted to Department of Defense contractors with a current DD 2345 certification on file with the Defense Logistics Information Service and active registration in the Joint Certification Program. First Article Testing is required for this procurement. All proprietary information submitted must be clearly marked as confidential to be protected under 18 USC 1905.

POSTED

DEADLINE

Solicitation # N0010425QNC18

Solicitation N00104-25-Q-NC18 is a total small business set-aside issued by NAVSUP Weapon Systems Support for the procurement of three clamping rings (NSN 1350-01-671-1961). The requirement is pursued under Emergency Acquisition Flexibilities and is DO certified for national defense under the Defense Priorities and Allocations System. The scope includes the manufacture of the rings in accordance with Technical Data Package version 006 and drawing 6964634. A critical technical requirement is that all materials must be mercury-free, as the components are intended for use on surface ships and submarines. The contract mandates a rigorous quality assurance process, including compliance with ISO 9001 standards and the performance of both First Article Testing and Production Lot Testing. These non-destructive tests are conducted by the government at Naval Station Newport, RI. The delivery period is 400 days, with shipping terms set as FOB Destination to the DLA Distribution New Cumberland facility in Pennsylvania. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Administrative requirements include the use of the Wide Area Workflow system for invoicing and receiving reports. Packaging and marking must adhere to MIL-STD-2073 and MIL-STD-129. The solicitation has undergone multiple amendments, with the most recent extension moving the response deadline to November 30, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Deployable Ammunition Processing Capability

Solicitation # LCD-26-0064

The Deployable Ammunition Processing Capability solicitation, issued by the Department of Defence DSRG under number LCD-26-0064, seeks a vehicle-portable and containerised workspace. This system is designed to facilitate the authorised inspection, safety classification, and repackaging of land munitions in environments outside of fixed depot infrastructure, thereby reducing dependence on established rear area facilities and improving ammunition assurance at the point of need. The solicitation was posted on October 29, 2026, with a response deadline of November 25, 2026. Performance for this contract will take place across multiple major Australian cities, including Canberra, Sydney, Melbourne, Adelaide, Perth, Brisbane, Darwin, and Hobart. Interested parties can coordinate through the primary point of contact at [email hidden].

Department of Defence - DSRG

POSTED

DEADLINE

Vehicle Recompete: FY22 PROCUREMENT OF 61MM M27, 80MM M24/M28 MORTAR FINS FOR PM CAS REQUIREMENT. — INDEFINITE DELIVERY / INDEFINITE QUANTITY W52P1J22R0045This indefinite delivery, indefinite quantity contract was established by the Department of the Army for the procurement of M27 60mm and M24/M28 81mm mortar fin assemblies to support PM CAS requirements. The vehicle, identified as W52P1J22R0045, has an ordering period that extends through April 26, 2028. The procurement is classified as a full recompete and is managed under NAICS code 332993. There are currently four active task orders with a total combined value of 8,654,122.50 dollars. Globe Tech LLC is the primary contractor, holding three orders totaling over 8.6 million dollars, including significant acquisitions for M24 and M27 fin assemblies as well as M28 tail fin assemblies for delivery to Pine Bluff Arsenal. Flexible Concepts Inc holds one order valued at 5,000 dollars as a minimum guarantee.

Department of the Army

POSTED

15 days ago

DEADLINE

N/A

AI Contract Overview

Gwinnett County Government is seeking a subcontractor to supply 400 units of pump tubing designed for use with Avalanche Samplers in the 5800, 4700, and 6700 series, with part number 60-6700-062 or an approved equivalent; the tubing must be packaged in increments of five units per pack. The requirement is classified under NAICS code 332993, indicating it falls under other miscellaneous manufacturing, and is open for bid through the state’s procurement system with a response deadline of June 30, 2026 at 7:50 PM Eastern Time. The solicitation was posted on June 25, 2026, and the contract is structured as a subcontract, though no set-aside provisions or specific organization type requirements are indicated. Performance of the work is not restricted to a specific location beyond the general jurisdiction of Georgia, and bidders must ensure compliance with all technical specifications for compatibility and packaging. The full details and submission portal are accessible via the provided state procurement link.

General Info

Supply 400 pump tubing units for Avalanche Samplers, packaged in fives, due June 30, 2026.

Agency

Georgia → Gwinnett County Government

NAICS

332993 - Ammunition (except Small Arms) Manufacturing

Place of Performance

GA, USA

Set-Aside

NONE

Documents

This scope was carved out of 132106.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

IWQ 132106 Pump Tubing

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJun 25

subcontract

Response DeadlineJun 30

Deadline has passed

Submission Closed

06/30/2026, 03:50:00 PM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGeorgia → Gwinnett County Government

ContactsNo contacts available

OfficeN/A

Organization / AgencyGeorgia → Gwinnett County Government

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of 400 units of pump tubing compatible with Avalanche Samplers, part number 60-6700-062 or approved equivalent, sold in packs of 5.

More opportunities from Georgia → Gwinnett County Government

Same awarding agency

Pump Tubing Supply for Avalanche Sampler (5800/4700/6700 Series)

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

No documents to break down

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Georgia → Gwinnett County Government

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open