1 wireless Kinematic system, brand name or equal

This is a combined synopsis/solicitation for commercial items prepared in accordance with FAR 12.6, Streamlined Procedures for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; Quotes are being requested and a written solicitation will not be issued. The solicitation number is W81XWH16T0016. The solicitation is issued as a request for quotation (RFQ). Provisions and clauses in effect through Federal Acquisition Circular 2005-78 are incorporated. It is the contractor's responsibility to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses https://acquisition.gov/far/index.html and http://www.acq.osd.mil/dpap/sitemap.html. The NAICS code is 334510, with a small business size of 500 employees. This is a Full and Open Competition requirement; all qualified vendors are encouraged to submit a quote. The US Army Medical Research Acquisition Activity (USAMRAA), on behalf the US Army Institute of Surgical Research (USAISR) Ft Sam Houston, Texas requests responses from qualified sources capable of equipment that is brand name or equal to the Xsens Wireless Kinematic System and accessories or equivalent with the following: ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 2 Each KINEMATIC SYSTEM, WIRELESS FFP MVN-AWINDA-BIOMECH- Brand Name or Equal FOB: Destination PURCHASE REQUEST NUMBER: 0010717851-0001 ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0002 1 Each MVN STUDIO BIOMECH LIFETIME FFP MVNS-BIOM-L-D; INCLUDE 3 YEAR MAINT + SUPPORT, DNG KEY- Brand Name or Equal FOB: Destination PURCHASE REQUEST NUMBER: 0010717851-0001 ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0003 1 Each XS-TIME-DNG LICENSE DONGLE FFP XS-TIME-DNG LICENSE DONGLE FOB: Destination PURCHASE REQUEST NUMBER: 0010717851-0001 ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0004 1 Each MVN AWINDA BACK-UP SET; FFP MVNA-BU-SET- Brand Name or Equal FOB: Destination PURCHASE REQUEST NUMBER: 0010717851-000 MECS Minimum Essential Characteristics Xsens Wireless Kinematic System Brand Name or Equal - Shall be able to capture full-body camera-less inertial motion - Wireless data Link: One station per subject - Wirelessly capture human movement with minimum 6 (Depth of Field) DOF in a virtual reality environment - The software shall have a biomechanical model - 3D global position of at least 23 body segments - 3D global position of body centre of mass - 3D joint angles OF at least 22 body joints - Ability to enter the following body dimensions: body height, foot size, arm span, hip height, hip width, knee height, shoulder width and shoe sole height. Export data in .MVNX data format - Export data in MV4 and AVI movie format - Height trackingReal-time visualization of data in graphs (phase plots) - Global 3D position accuracy: ~1 % of travelled distance.(This is going to be very important for the closest and most accurate data collected.) - Immune to temporary magnetic disturbances. (Most magnetic disturbances encountered in the pre-hospital environment that we are looking at will be temporary rather than sustained.) - flexibility to measure the following spine segments:pelvis, L5, L3, T12, T8, neck, head - Spine joints: L5-S1, L4-L3, L1-T12, T9-T8, T1-C7, C1-head. - Static accuracy (roll and pitch): <0.2 deg. - Static accuracy (heading): <0.5 deg. - Dynamic accuracy: 1 deg RMS. - Accelerometer range: +/- 160 m/s2 - Gyroscope range: +/- 2000 deg/s - Minimum 6 hour battery. Internal sampling rate of at least 1000 HZ with an output rate of 60 Hz (US standard frequency) - Shall have a customizable configuration to allow for single sensors to be used on multiple parts of the body. - Shall be a standalone system that does not need any kind of external grid set up to record positioning. - Shall be able to be used in remote and austere conditions with less than a 5% failure rate. INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC 0001 15-DEC-2015 2 USA ISR USAISR BLDG 3611 FORT SAM HOUSTON SAN ANTONIO TX 78234 FOB: Destination W45MW3 0002 15-DEC-2015 1 (SAME AS PREVIOUS LOCATION) FOB: Destination W45MW3 0003 15-DEC-2015 1 (SAME AS PREVIOUS LOCATION) FOB: Destination W45MW3 0004 15-DEC-2015 1 (SAME AS PREVIOUS LOCATION) FOB: Destination W45MW3 CLAUSES INCORPORATED BY REFERENCE 52.204-7 System for Award Management JUL 2013 52.204-13 System for Award Management Maintenance JUL 2013 52.207-2 Notice Of Streamlined Competition MAY 2006 52.212-4 Contract Terms and Conditions--Commercial Items MAY 2015 52.223-5 Pollution Prevention and Right-to-Know Information MAY 2011 52.247-34 F.O.B. Destination NOV 1991 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7006 Billing Instructions OCT 2005 252.204-7008 (Dev) Compliance with Safeguarding Covered Defense Information Controls OCT 2015 252.204-7015 Disclosure of Information to Litigation Support Contractors FEB 2014 252.211-7008 Use of Government-Assigned Serial Numbers SEP 2010 252.223-7006 Prohibition On Storage, Treatment, and Disposal of Toxic or Hazardous Materials SEP 2014 252.225-7001 Buy American And Balance Of Payments Program-- Basic (Nov 2014) NOV 2014 252.225-7036 Buy American--Free Trade Agreement--Balance of Payments Program--Basic (Nov 2014) NOV 2014 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports JUN 2012 252.232-7010 Levies on Contract Payments DEC 2006 252.246-7000 Material Inspection And Receiving Report MAR 2008 CLAUSES INCORPORATED BY FULL TEXT 52.211-6 BRAND NAME OR EQUAL (AUG 1999) (a) If an item in this solicitation is identified as "brand name or equal," the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation. (b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must-- (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by-- (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an "equal" product, the offeror shall provide the brand name product referenced in the solicitation. (End of provision) 52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (OCT 2015) (a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in Block 10 of the solicitation cover sheet (SF 1449). However, the small business size standard for a concern which submits an offer in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees. (b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show-- (1) The solicitation number; (2) The time specified in the solicitation for receipt of offers; (3) The name, address, and telephone number of the offeror; (4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; (5) Terms of any express warranty; (6) Price and any discount terms; (7) "Remit to" address, if different than mailing address; (8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically); (9) Acknowledgment of Solicitation Amendments; (10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and (11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration. (c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during preaward testing. (e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately. (f) Late submissions, modifications, revisions, and withdrawals of offers: (1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due. (2)(i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and-- (A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or (B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or (C) If this solicitation is a request for proposals, it was the only proposal received. (ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted. (3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel. (4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer. (g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror's initial offer should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received. (h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer. (i) Availability of requirements documents cited in the solicitation. (1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to--GSA Federal Supply Service Specifications Section, Suite 8100, 470 East L'Enfant Plaza, SW, Washington, DC 20407, Telephone +1 (555) 000-0000, Facsimile +1 (555) 000-0000. (ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee. (2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites: (i) ASSIST (https://assist.dla.mil/online/start/). (ii) Quick Search (http://quicksearch.dla.mil/). (iii) ASSISTdocs.com (http://assistdocs.com). (3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by-- (i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm); (ii) Phoning the DoDSSP Customer Service Desk +1 (555) 000-0000, Mon-Fri, 0730 to 1600 EST; or (iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone +1 (555) 000-0000/2179, Facsimile +1 (555) 000-0000. (4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance. (j) Data Universal Numbering System (DUNS) Number. (Applies to all offers exceeding $3,500, and offers of $3,500 or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database. The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "DUNS" or "DUNS +4" followed by the DUNS or DUNS +4 number that identifies the offeror's name and address. The DUNS +4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the offeror to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for the same concern. If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. An offeror within the United States may contact Dun and Bradstreet by calling +1 (555) 000-0000 or via the internet at http://fedgov.dnb.com/webform. An offeror located outside the United States must contact the local Dun and Bradstreet office for a DUNS number. The offeror should indicate that it is an offeror for a Government contract when contacting the local Dun and Bradstreet office. (k) System for Award Management. Unless exempted by an addendum to this solicitation, by submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance and through final payment of any contract resulting from this solicitation. If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. Offerors may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov. (l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable: (1) The agency's evaluation of the significant weak or deficient factors in the debriefed offeror's offer. (2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror. (3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection. (4) A summary of the rationale for award; (5) For acquisitions of commercial items, the make and model of the item to be delivered by the successful offeror. (6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency. ADDENDUM TO 52.212-1 ADDITIONAL INSTRUCTIONS TO OFFERORS 1. TECHNICAL QUESTIONS AND PRE-PROPOSAL DISCUSSION Questions concerning the solicitation are due no later than 6 November 2015 at 10:00 A.M Eastern Time. Questions shall be submitted to contact@example.gov no later 6 November 2015 at 10:00 A.M Eastern Time. An amendment to the solicitation will be posted in order to address the questions received; however, no questions will be addressed after the cutoff date and time listed above. Please note that only one (1) set of question will be accepted by the Government 2. INSTRUCTIONS FOR THE PREPARATION AND SUBMISSION OF PROPOSALS Failure to submit all documents concurrently and in accordance with these instructions may render a proposal unacceptable. The proposal shall be submitted electronically via email to contact@example.gov no later 10 November 2015 at 10:00 A.M Eastern Time. 3. PROPOSAL EVALUATION To aid in evaluation, proposals shall be practical, specific complete, and logically assembled. The proposal shall be in a clear, concise format satisfying all requirements of this solicitation. It shall be in sufficient detail to demonstrate a complete understanding of the work to be accomplished. 4. THE PROPOSAL The overall proposal shall consist of two (2) separate volumes, individually titled. Each volume shall be appropriately titled, as follows: Volume Number Volume Title Volume I Technical Proposal Volume II Price Proposal Volume I shall consist of technical documentation. The entirety of Volume I, should not exceed thirty (30) pages, including appendices, matrices, and tables. Fold-outs (either 8 " by 14" or 11" x 17") shall count as two (2) pages each. Proposals shall be typed in 12-point, Times New Roman font using 1" margins on the top, bottom and sides. Graphics, tables and matrices are exempt from the 12-point font requirement. Any pages exceeding the page limitation or any pages containing materials not legible to the evaluators will be disregarded and will not be evaluated. 4.1. Contents of the Technical Proposal (Volume I) All sections of the Offeror's Technical Proposal shall make direct reference to theMECs, if applicable. The Proposal shall be presented in a clear and logical order. Statements such as "will comply", "meets the intent of", or "we intend to meet the requirements" and the like, will not suffice for evaluation purposes. Section 2 - Technical Acceptability In Section 2, the Offer shall clearly demonstrate that it meets all of the requirements as outlined in the MECs. 4.2. Contents of the Price Proposal (Volume II) The Offeror shall provide a Price Proposal to include the following items: Electronic copy of the Offeror's Commercial Published Price (including any additional discounts off of its current pricing); The Offeror shall submit their proposed price as a Firm Fixed Price proposal. The Offeror's price proposal shall include proposal price assumptions, if any. The Government anticipates the Offeror provide their preferred customer pricing (to include any discounts) and pricing commensurate with prices paid for other Government contracts. If your proposal includes subcontractor support, rate information from the subcontractor will also be required. Price proposals shall include the following: All other costs and the reductions or rebates offered. Offerors' proposals shall remain open for a minimum of 90 days from the date of submission. 5. COST/PRICE COMPETITION The Pricing Proposal shall be evaluated on completeness, fairness and reasonableness. The offeror shall submit unit pricing for all CLINs. The Offeror is not required to provide other than certified cost or pricing data IAW FAR 15.403-1(c)(3)(i). However, if after receipt of the proposals, the Contracting Officer determines that data other than certified cost or pricing data is required, the Offeror shall provide this information upon request. (End of provision) 52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: The Lowest Price Technically Acceptable (LPTA) process is selected as appropriate for this acquisition because the best value is expected to result from the selection of the technically acceptable proposal with the lowest evaluated price(s). For purposes of this requirement, LPTA is defined as any technically acceptable offer for which the proposed pricing is determined fair and reasonable. Please note that if upon evaluation, an Offeror is deemed "Unacceptable" for either Technical or Price, it will be excluded from award consideration. The Government intends to evaluate the proposal and award a firm fixed price contract without discussions to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. However, the Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary in accordance with FAR 15.306. Therefore, the Offeror's initial proposal should contain its best terms from both price and technical standpoint. The awards will be made based on the LPTA source selection process. The following factors shall be used to evaluate offers: Factor 1 - Technical Acceptability (Capability to meet the contract requirements as specified in the MECs) Factor 2 - Price (Completeness and Reasonableness) Each of the evaluation factors will be rated as follows: 1. Factor 1 - Technical Acceptability A technically acceptable proposal will demonstrate that the Offeror has a clear understanding of the requirements outlined in the MECs. The Offeror's proposal shall include all required documentation detailed in the instructions to offerors. 2. Factor 2 - Price The offeror will be evaluated for fairness, reasonableness and completeness. a. Reasonableness - The offeror's Price will be evaluated separately to determine the degree to which the proposed prices compare to the prices a reasonable prudent person would expect to incur for the same or similar equipment. b.Completeness- The offeror's Price proposal will be examined to ensure that the requirements stated in the Instructions to Offerors for price proposals have been completed The cost/price will be evaluated separately from all non-cost/price factors. The objective of price analysis is to ensure that the final agreed-to price is fair and reasonable in accordance with FAR 12.209 and FAR 15.404-1(b). Offerors' price proposals will be evaluated to determine whether the price is complete, fair and reasonable. The Government's determination that the proposed price is fair and reasonable will be based on price evaluation and analysis using the techniques in FAR 15.305(1), which provides that comparison of the proposed prices will usually satisfy the requirement for price analysis. 3. Rating Standards for the Non-Cost/Price Factors and Definitions 3.1. Technical Ratings Rating Description Acceptable Proposal clearly meets the minimum requirements of the solicitation. Unacceptable Proposal does not clearly meet the minimum requirements of the solicitation. (End of provision) 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (OCT 2015) The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (p) of this provision. (a) Definitions. As used in this provision -- "Economically disadvantaged women-owned small business (EDWOSB) Concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner. Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. Inverted domestic corporation means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except-- (1) PSC 5510, Lumber and Related Basic Wood Materials; (2) Product or Service Group (PSG) 87, Agricultural Supplies; (3) PSG 88, Live Animals; (4) PSG 89, Subsistence; (5) PSC 9410, Crude Grades of Plant Materials; (6) PSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) PSC 9610, Ores; (9) PSC 9620, Minerals, Natural and Synthetic; and (10) PSC 9630, Additive Metal Materials. Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. Sensitive technology-- (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-- (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). Service-disabled veteran-owned small business concern-- (1) Means a small business concern-- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled...