10--Barrel Buffer Assembly, NSN: 1005-01-141-1235, Part Number: 9340487. This is an IDIQ contract with an estimated five year contract value of $2,775,000.00.

DESC: NSN 1005-01-141-1235, Part Number 9340487. The item to procure is a Barrel Buffer Assembly for the M2 Machine Gun. Item consists of: Oil Buffer Piston Rod Assembly, Buffer Piston Rod Nut, Buffer Tube and Pin. Most parts can be machined from s teel, ASTM A322 or A331, 4147, 4150, 4140, 4340 or 6150. Heat treatment at 1525-1575 F, oil quench, temper for 1 Hr Min to hardness specified. The part is 4.932 inches long X .750 at the largest O.D. Phosphate finish is required. Proposed contract is 1 00% Small Business Set-Aside. Solicitation will result in a Five Year Indefinite Delivery, Indefinite Quantity (IDIQ) contract. Guaranteed minimum requirements are 5,000 each, with a potential contract maximum quantity of 75,000 each. FOB is Destination . Estimated issue date is 03 October 2007. The response date listed is an estimate only. All or a part of this action is an unfunded FY07 requirement. This solicitation will be issued electronically in accordance with FAR 4.502 and 5.102, therefore, ha rdcopies will not be provided. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the internet: https://aais.ria.army.mil/aais/SOLINFO/index.htm. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidders mailing list. It is therefore incumbent upon any interested parties to periodically access the above interne t address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for bid opening/receipt of proposals may render your bid or proposal non-responsive and result in the rejection of same.