Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

1377-00-409-1099 MD16 Flexible Confined Detonating Cord

Active

N0010426QK082Federal

Response Deadline08/06/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The solicitation for item 1377-00-409-1099 MD16 Flexible Confined Detonating Cord is restricted exclusively to Pacific Scientific Energetic Materials Company and Rockwell Collins, with no other vendors eligible to respond. All materials involved are classified as explosive, and specific details regarding explosive weight and classification must be obtained from the full solicitation document. Paper copies will not be distributed, and all submission and communication must be completed electronically through the provided online portal. The solicitation was posted on July 22, 2026, and responses are due by August 6, 2026, at 6:00 PM. It falls under NAICS code 325920 and is managed by the Navsup Weapon Systems Support Mech under the Department of Defense, with the office located in Mechanicsburg, Pennsylvania. Primary point of contact is Alicia Wargo, reachable via email at alicia.l.wargo.civ@us.navy.mil or by phone at 771-229-0601. No set-aside provisions apply, and the place of performance details are not specified.

General Info

Exclusive solicitation for explosive detonating cord due August 6, 2026, electronic submission only, Navy contact Alicia Wargo.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

325920 - Explosives ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(5)

3.04_ADC_MASTER_Rev16_26NB082 Ammunition Data Card Master

PDF•ammunition-data-card

CAD/PAD Item Marking Instruction Ver1.6 26NB082

PDF•sow

RFQ Solicitation N0010426QK082 for Flexible Confined Detonating Cords

PDF•rfq

3.04_ADC_SOW_Rev_Basic_Dated_Jan2018_26NB082 - Ammunition Data Cards Statement of Work

PDF•sow

Request for Variance 24CK999-V001 JM60 Catapult Battery Voltage Check

PDF•rfv

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation

PostedJul 22

Solicitation

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 06:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Contacts1 person available

OfficeMECHANICSBURG, PA, 17050-0788, USA

Organization / Agency

Department Of Defense → Navsup Weapon Systems Support Mech

View Agency Profile

Office AddressMECHANICSBURG, PA, 17050-0788, USA

Contacts

Alicia Wargo

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Paper copies will not be provided. Procurement is restricted to Pacific Scientific Energetic Materials Company and Rockwell Collins. Items are explosive. See solicitation for explosive weight and class.

Similar Contracts

Same NAICS industry code

Cartridge and Engine Starter Component SupplyThe contract seeks qualified subcontractors to manufacture cartridges for engine starter systems used in aircraft and missile platforms, with strict requirements for handling energetic materials and ensuring operational reliability under extreme environmental conditions. The work demands high precision, adherence to defense-grade safety standards, and proven capability in producing components that function reliably under high stress, temperature variations, and dynamic launch environments. This is a subcontract opportunity under NAICS code 325920, indicating specialized chemical manufacturing relevant to defense applications. All proposals must be submitted by September 1, 2026, and the contract is issued under the Department of Defense through the FA8213 Aflcmc Ebhk office. While specific performance locations and point of contact details are not provided, the nature of the work implies stringent compliance with federal defense procurement regulations and likely requires facilities certified for classified or controlled material handling. Bidders must demonstrate technical expertise in energetic components, quality control protocols for mission-critical systems, and experience supporting aerospace or missile platforms.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

in about 1 month

Linear Charge Assembly SupplyThe contract requires the supply of linear shaped charges, specifically designated as SMDC LINE, intended for precision cutting or separation applications in egress systems and missile staging operations. These components must meet stringent performance tolerances to ensure reliability and safety under high-stress operational conditions, with all manufacturing, handling, and assembly procedures strictly adhering to ordnance safety and handling regulations. The work is classified as a subcontract under NAICS code 325920, indicating specialized manufacturing of other chemical products, and is issued by the Department of Defense under the agency designation FA8213 Aflcmc Ebhk. Responses are due by September 1, 2026, and the opportunity was posted on July 22, 2026, providing potential vendors approximately six weeks to prepare and submit proposals. There is no specified set-aside designation, meaning the contract is open to all qualified suppliers regardless of business size or certification status. The place of performance and point of contact details are not provided, but the work is expected to support critical defense applications, necessitating adherence to federal defense standards and secure logistical protocols throughout production and delivery.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

in about 1 month

Time Delay and Actuator Component ProductionThe contract mandates the manufacture of explosive actuators and precision time delay components designed for use in sequencing systems that control ejection or missile launch operations. These components must meet rigorous performance standards, including precise timing tolerances and robust reliability under extreme environmental conditions. All produced items require completion of comprehensive environmental testing to validate performance under temperature, vibration, shock, and humidity extremes typical of aerospace and defense applications. Strict lot traceability is enforced throughout the production lifecycle, ensuring every component can be tracked back to raw materials, manufacturing processes, and quality control records to support accountability and mission-critical integrity. The contract is classified as a subcontract under NAICS code 325920 and is issued by the Department of Defense through the agency FA8213 Aflcmc Ebhk. Responses must be submitted by September 1, 2026, and the solicitation was posted on July 22, 2026. No set-aside provisions are specified, and the place of performance details are not provided, indicating potential flexibility in manufacturing location provided all requirements are met. The work is mission-sensitive and must adhere to defense-grade compliance standards without public disclosure of specific technical parameters or performance metrics.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

in about 1 month

Explosive Initiator ManufacturingThe contract pertains to the manufacturing of precision explosive initiators, specifically M26 and EBW types, intended for use in aircraft egress and missile systems. It encompasses the full lifecycle of production including assembly, rigorous testing, and strict adherence to established ordnance safety standards to ensure reliability and operational integrity under high-stress conditions. All work must be executed in compliance with federal and military specifications governing explosive devices, with an emphasis on quality control, traceability, and safety protocols throughout each phase of development and fabrication. The contract is classified as a subcontract under NAICS code 325920, which corresponds to Other Chemical Product and Preparation Manufacturing, and is sponsored by the Department of Defense through the agency FA8213 Aflcmc Ebhk. The solicitation was posted on July 22, 2026, with a mandatory response deadline of September 1, 2026, at 11:00 PM. The place of performance and specific office address are not designated in the available data, indicating flexibility in facility location provided that all regulatory and security requirements are met. The award is intended to secure a capable and certified supplier with demonstrated expertise in sensitive explosive component production for defense applications.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

in about 1 month

Small Business Prime/Subcontractor Teaming OpportunityThis opportunity is open to certified small businesses seeking to serve as primes or subcontractors on future contracts related to egress components, with a NAICS code of 325920 indicating the industry category. The initiative is designed to facilitate teaming arrangements that position qualified small businesses to respond to upcoming procurement needs under the Department of Defense, specifically through the FA8213 Aflcmc Ebhk office. Interested parties must submit their expressions of interest by the deadline of August 7, 2026, with no solicitation number or specific set-aside designation currently assigned, indicating this is a pre-solicitation effort to identify capable participants rather than a formal bid request. The opportunity does not specify a place of performance or point of contact, suggesting that future contract awards will determine location and liaison details. Participation is intended to build a pool of vetted small business candidates who can be rapidly mobilized when actual egress component contracts are released. While no financial or technical requirements are outlined in the posted data, certification as a small business is implied as a prerequisite. Subcontractors and primes alike are encouraged to engage early to ensure visibility within the DoD’s acquisition pipeline and to align with potential future requirements under this indefinite delivery vehicle.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

Impulse Cartridge ManufacturingThe contract pertains to the manufacturing of impulse cartridges designed to generate precise gas pressure for activating ejection mechanisms in fighter aircraft, a critical component for pilot safety and emergency escape systems. This subcontract is issued under the NAICS code 325920, indicating it falls within the chemical manufacturing sector, and is administered by the Department of Defense through its agency FA8213 Aflcmc Ebhk. The solicitation was posted on July 22, 2026, with a response deadline of August 7, 2026, requiring prospective contractors to submit proposals within this timeframe. While specific performance locations and points of contact are not provided, the work is expected to support defense aviation systems with stringent technical and reliability standards. The contract does not have a set-aside designation, meaning it is open to all eligible businesses regardless of size or status.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

Explosive Cord Set ProductionThe contract pertains to the supply and fabrication of explosive cord sets specifically designed for severing aircraft canopies during emergency ejection sequences, ensuring crew safety under critical conditions. These components are precision-engineered to function reliably in high-stress environments and must meet stringent military performance and safety standards. The work is classified under NAICS code 325920, indicating it falls within the specialty chemical manufacturing sector, and is structured as a subcontract under the Department of Defense through the agency FA8213 Aflcmc Ebhk. The solicitation was posted on July 22, 2026, with responses required by August 7, 2026, allowing potential vendors a four-week window to submit proposals. Performance location details are not specified, but the nature of the product suggests the fabrication and delivery must align with defense installation requirements, likely involving secure handling and transport protocols for explosive materials. The absence of set-aside designation implies the opportunity is open to all qualified contractors regardless of business size or classification.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

Precision Energetic Initiator ManufacturingThe contract seeks a subcontractor to manufacture precision explosive initiators specifically designed for use in ejection seat and canopy egress systems on F-15, F-16, and F-22 aircraft. These components are critical safety and survival devices that must meet stringent performance, reliability, and safety standards required by military aviation operations. The work involves high-precision manufacturing processes for energetic materials, with strict adherence to defense specifications and secure handling protocols due to the hazardous nature of the materials involved. The solicitation is classified as a subcontract under NAICS code 325920, indicating it falls within the specialtychemical manufacturing sector, and is issued by the Department of Defense through the agency FA8213 Aflcmc Ebhk. The opportunity was posted on July 22, 2026, with a firm deadline for responses set for August 7, 2026, at 10:00 PM Eastern Time. No set-aside designation or location-specific performance requirements are specified, but the nature of the work implies strict security compliance and potential location constraints related to defense manufacturing facilities. All submissions must demonstrate technical capability, quality control systems, and experience with military-grade explosive initiators to be considered.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

Manufacture of Flexible Confined Detonating Cord (FCDC)

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Explosives and Ordnance Operations Support ServicesThe U.S. Government, through the Naval Surface Warfare Center Indian Head Division, is conducting a sources sought market survey to identify potential vendors capable of providing direct operational support services at a Government-Owned Government-Operated energetic materials facility in Indian Head, Maryland. The support services relate to a broad spectrum of operations involving propellants, explosives, pyrotechnics, and other hazardous energetic materials. Respondents must submit a company brochure or capability statement along with organizational details including name, address, point of contact, phone, fax, email, business size, taxpayer identification number, UEI, and CAGE Code. Submissions from firms with prior experience producing similar items are strongly encouraged. This is not a solicitation for proposals, nor does it constitute a commitment to award a contract; no award will result from this market survey, and the Government reserves full discretion to reject any submissions without obligation or notification. All responses must be emailed to Claudia Segura at claudia.p.segura2.civ@us.navy.mil no later than 2:30 p.m. EST on August 5, 2026, with large files required to be compressed into a ZIP format and properly renamed with a .zip extension. The North American Industry Classification System code associated with this effort is 325920.

Nswc Indian Head Division

POSTED

DEADLINE

FY27 CAD/PAD Sources Sought SynopsisThe U.S. Department of the Air Force, through Air Force Materiel Command at Hill Air Force Base, Utah, issued a Sources Sought Synopsis under solicitation number FA821326R3056 to gather market research information for the potential procurement of critical egress system components for F-15, F-16, and F-22 aircraft in fiscal year 2027. This notice, posted on July 22, 2026, with responses due by August 7, 2026, is not a solicitation or a request for proposals but a preliminary effort to assess industry capabilities, competition, and potential for small business participation under NAICS code 325920, which has a size standard of 750 employees. The required components include energetic and explosive items such as initiators, explosive cord sets, impulse cartridges, and canopy removers, each identified by unique Department of Defense Identification Codes and National Stock Numbers, with technical specifications controlled by third-party entities including Collins Aerospace, Nammo Defense Systems, and Pacific Scientific Energetic Materials Company. Respondents must demonstrate independent access to these proprietary technical data sets, as the government does not hold usage rights, and must prove proven experience in manufacturing, inspecting, and testing such components under stringent aerospace safety standards. All submissions must be emailed to Lauren Johnston at lauren.johnston.4@us.af.mil and must include company profile details such as CAGE Code and Unique Entity Identifier, small business status, and any teaming arrangements, with specific emphasis on participation from 8(a), SDVOSB, HUBZone, and WOSB concerns. No funding is available to support second-source qualification, and offerors must bear all costs associated with preparing their responses; reimbursement is not provided. The place of performance is fixed at Hill Air Force Base, Utah, and delivery and inspection are expected to occur there, though no formal delivery schedule, FOB terms, or payment details are specified. The synopsis explicitly excludes pricing, contract line items, award basis, or evaluation factors, as it serves only to inform future acquisition planning. Security clearances, contract clauses, packaging requirements, and invoicing procedures are not addressed, as the document contains no binding requirements but rather seeks industry input on capability, qualification, and availability to support potential future solicitations.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

Thin Layer Explosives (SP02/SP03)The contract is for the procurement of Thin Layer Explosives, specifically SP02 and SP03, under a two-year, Firm Fixed Price Indefinite Delivery/Indefinite Quantity (IDIQ) agreement. Only qualified sources with a valid Government-issued Qualification Acceptance Letter signed by an authorized engineer may submit offers, as the solicitation is restricted under 10 U.S.C. 3204(a)(1) and FAR RFO 6.103-1(b). The specified items are identified by NSN 1377-01-356-7841 with Part Number 51960-1 and NSN 1377-01-356-7842 with Part Number 51960-4. The solicitation number is W519TC26R0027, issued by the Department of Defense through the W6QK Acc-Ri office located in Rock Island, Illinois. The NAICS code is 325920, and proposals must be submitted by the deadline of September 8, 2026. Primary point of contact is Caitlyn Smith, with Aly Bigham listed as secondary. The solicitation was posted on July 22, 2026, and all responses must be submitted through the designated SAM.gov portal.

POSTED

DEADLINE

in about 2 months

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

48--VALVE,GLOBEThis contract is a firm fixed-price solicitation for the procurement of a globe valve identified by NSN 1H 4810 01-483-3715 X3, issued by the Naval Supply Systems Command Weapon Systems Support under solicitation number N0010426RBU53, with a closing date of August 7, 2026. The technical and quality requirements are governed by the Individual Repair Part Ordering Data (IRPOD), which supersedes all other referenced documents in case of conflict, and include mandatory compliance with MIL-I-45208 as supplemented by ISR-1, inspection and acceptance procedures, and first article testing requiring approval of one unit prior to production. The contractor must submit detailed pre-manufacturing, test, and supplier data packages at specified intervals—within 45 days after contract award and at contract completion—using standardized DD Form 1423 formats, with all submissions required to comply with NAVSUP-WSS-specific procedures and sequence control numbers. Packaging must adhere to MIL-PRF-23199, with strict cleanliness controls referenced from MIL-STD-767 and MIL-STD-2041, and mercury is strictly prohibited from contact with the hardware. All technical documents, including drawings and specifications, are accessible only through the secured logistics e-commerce portal and are marked NOFORN, requiring explicit government authorization for any foreign dissemination. The contractor must maintain a government-acceptable inspection system, retain all inspection records, and comply with cybersecurity maturity model certification and small business representation mandates, while also fulfilling mandatory submission of certified cost or pricing data and adhering to priority ratings for national defense and energy programs. Pricing is valid for 60 days after the closing date, with FOB destination delivery, electronic invoicing via WAWF, and contractual documents deemed issued upon electronic transmission.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

CHASSIS,ELECTRICAL-This contract pertains to the manufacture and delivery of the CHASSIS,ELECTRICAL- under solicitation N0010426QND50, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA. The requirement is issued under Emergency Acquisition Flexibilities and will be awarded bilaterally upon written contractor acceptance. The item must conform to specific Cage Code 0KPC5 and reference number CCHA40450, and must be marked in accordance with MIL-STD-130 Rev N. All substitutions or design changes require prior written approval from the NAVICP-MECH Contracting Officer, classified under six defined change codes, with Code 1 allowing only part number changes when parts are identical. Strict mercury-free standards are enforced due to the item’s use on submarines and surface ships; no metallic mercury or contamination is permitted unless explicitly approved with detailed justification, protective measures, and labeling. The contractor must ensure all subcontractors comply with these restrictions and maintain inspection records for 365 days after final delivery. Quality assurance responsibilities rest entirely with the contractor, who must implement their own inspection systems to ensure compliance and may be subject to government verification at any time. Packaging must adhere to MIL-STD-2073 as specified in the schedule. The solicitation mandates that only authorized distributors of the original equipment manufacturer may respond, requiring proof of authorization signed on company letterhead. Compliance with Buy American provisions, Defense Priorities and Allocations System (DPAS) certification, and cybersecurity maturity model requirements is mandatory. The contract includes provisions for small business set-asides, subcontracts, and the mandatory use of Workflow Pro’s Assist Module for payment processing via receiving report and invoice combinations. All contractual documents are considered officially issued upon electronic transmission, and distribution of any Navy-provided documents is controlled under one of seven distribution statement codes, with NOFORN and Official Use Only materials requiring specific certification. Respondents must submit proposals before the deadline of August 10, 2026, to the designated point of contact.

POSTED

about 10 hours ago

DEADLINE

VALVE,MANIFOLD ASSYThis contract pertains to the procurement of a Valve, Manifold Assembly designated as Special Emphasis Material (Level I) for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or the vessel. The material must strictly conform to VACCO Drawing V3D10334 and applicable specifications including ASTM-B21, ASTM-B283, ASTM-B16, ASTM-B36, and ASTM-B121, with specific alloy and temper requirements for the sensing piston. Comprehensive quality assurance measures are mandated, including full traceability from raw material to finished component through unique heat-lot or traceability markings, 100% inspection of certification data, and mandatory submission of chemical and mechanical test reports. All welding, brazing, and repair operations must comply with S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, with procedures and qualification data requiring prior Navy approval; electronic signatures are accepted on certifications provided they are securely controlled and uniquely tied to authorized individuals. The contractor must maintain an ISO-9001 quality system aligned with ISO-10012 and ISO/IEC 17025 calibration standards and is subject to Government Source Inspection at the point of manufacture. All materials must be mercury-free, and any deviation or waiver from specifications requires formal approval by the Contracting Officer prior to implementation, with critical departures involving safety, performance, or structural integrity held to the highest scrutiny. Delivery and acceptance are governed by stringent procedural controls: all certification documentation must be submitted via Wide Area WorkFlow (WAWF) to Portsmouth Naval Shipyard with designated Ship to, Inspect by, and Accept by codes, and no material may be shipped without prior written acceptance. The contractor is required to flow down all quality, traceability, and certification requirements to sub-tier suppliers and must ensure subcontracted operations preserve traceability and compliance. Packaging must adhere to MIL-STD-2073, and configuration control is tightly managed under Engineering Change Proposal (ECP) protocols for any modifications affecting form, fit, function, or interface. The contract invokes Emergency Acquisition Flexibilities and is designated as a DPAS-rated order for national defense priority. Final acceptance hinges on zero-defect lot acceptance per ANSI/ASQ-Z1.4, with 100% verification of traceability, certifications, and compliance for every

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month

CONNECTOR,THRU-HULLThis contract pertains to the procurement of a thru-hull connector assembly designated as SPECIAL EMPHASIS MATERIAL (Level I), critical to the safe operation of shipboard systems where failure could result in catastrophic loss of life, vessel, or mission. The item must comply with specification CPG 1025 and associated drawings, with strict requirements for material composition, welding, inspections, and traceability. All critical components—including the penetrator body, cover, nut, and washers—must be manufactured from QQ-N-286 or QQ-N-281 material with full quantitative chemical and mechanical certification, and each lot must be traceable via unique heat or lot numbers permanently marked on the part or an attached durable tag. Welding procedures and qualifications must be submitted for pre-approval prior to any production or repair welding, and all welds must conform to S9074-AQ-GIB-010/248 or 0900-LP-001-7000. Material certifications must be submitted electronically via WAWF to Portsmouth Naval Shipyard (N50286) for review and acceptance prior to shipment, with no material permitted to leave the contractor’s facility without formal acceptance. The contractor is required to maintain a documented quality system compliant with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662, subject to government source inspection by DCMA. First Article Testing of one unit must be conducted at Portsmouth Naval Shipyard under government supervision, and all non-destructive and destructive tests, including ultrasonic inspection, dye penetrant testing, and hardness verification, must be performed per specified standards and documented with full traceability to the tested component. Electronic signatures on certifications are permitted but must be controlled, uniquely attributed, and tamper-evident. No molybdenum disulfide lubricants are allowed; only A-A-59004 anti-galling compound may be used on threads. The contract mandates 100% inspection of certification data and traceability markings, zero-defect acceptance criteria, and full compliance with Buy American and Small Business Subcontracting requirements. Delivery of all materials is due no later than 365 days after contract award, with certification data for weld procedures and material testing due 20 days prior to each shipment. This solicitation is issued under Emergency Acquisition Flexibilities and carries a “DO”

POSTED

about 10 hours ago

DEADLINE

in about 1 month

CANISTERThis contract pertains to the procurement of a specialized CANISTER designed for use in a critical shipboard system, where any failure could result in catastrophic consequences including loss of life, ship damage, or system failure. The item is classified as SPECIAL EMPHASIS MATERIAL (Level I) and is subject to stringent quality control, traceability, and inspection protocols under the Deep Submergence Systems Program. The contractor must comply with ISO-9001 or equivalent quality systems, maintain traceability from raw material to finished product using MIL-STD-792-compliant markings, and ensure 100% inspection of all Objective Quality Evidence and certification documents. All materials must conform to NAVSEA SS521-AM-MMA-010 Chapter 7, Navy part number 3.80.1018-3, and meet strict toxicity and flammability standards per NAVSEA SS800-AG-MAN-010/P-9290. Mercury and mercury-containing compounds are prohibited, and configuration control is strictly enforced through Engineering Change Proposals for any modifications affecting form, fit, function, or interface. The contract mandates zero-defect acceptance criteria for lot inspections, with sampling governed by ANSI/ASQ Z1.4 or full lot inspection for small batches. All compliance documentation, including Certificates of Compliance, must be submitted electronically via Wide Area Work Flow prior to delivery and must contain precise traceability to individual units, NSNs, and material certifications with no disclaimers or ambiguities. Certification data must be reviewed and accepted by Portsmouth Naval Shipyard six working days before final delivery, which is due within 210 days of contract award. Subcontractors are bound by the same quality requirements and must be notified of required Government inspections. The contractor must provide records of all inspections, calibrations, and nonconformances, and any waivers or deviations require prior written approval from the Contracting Officer with classification as Critical, Major, or Minor. Government Source Inspection by DCMA is mandatory at the contractor’s facility, and all packaging must conform to MIL-STD-2073. The contract further enforces Buy American provisions, Small Business Set-Aside status, and strict security restrictions in accordance with recent DOD deviations. All documentation submissions, including waiver requests and quality system procedures, must be processed via the Electronic Contractor Data Submission system, requiring PKI/CAC authentication. Final shipment is prohibited until formal acceptance is granted through WAWF with designated inspection and

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month

VALVE/ACTUATOR ASSYThis contract solicitation, numbered N0010426QLC26, is for the repair of VALVE/ACTUATOR ASSY units under a firm-fixed-price arrangement, with a mandatory Repair Turnaround Time (RTAT) of 180 days measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system. The government requires strict compliance with technical documentation, including adherence to manufacturer specifications and MIL-STD-130 marking standards, and prohibits unauthorized substitutions without prior written approval. All repairs must be inspected and accepted by the Government, and contractors are responsible for maintaining complete inspection records for 365 days post-delivery. Delivery is FOB Origin, and freight is managed by Navy CAV or Proxy CAV under NAVSUPWSSFA24 or NAVSUPWSSFA25 guidelines. Late deliveries incur a per-unit, per-month price reduction, with the exact amount to be specified by the contractor, and failure to meet RTAT may lead to termination for default. The contract includes an option for increased quantities within 365 days of award, exercisable at the original unit price. Contractors must be authorized distributors of the original manufacturer, and proof of authorization must be submitted with their offer. Technical documents referenced in the contract must be obtained from official DoD portals or designated Navy offices, with strict controls on distribution, particularly for NOFORN or Official Use Only materials. The contract enforces Buy American and cybersecurity maturity model certification requirements, and small business subcontracting obligations are applicable. A fee cap is established for testing and evaluation if an asset is deemed beyond repair, and price comparisons to new unit costs must be included in the quote. The contract will be awarded bilaterally, requiring contractor acceptance before execution. All responses must include unit price, total price, and RTAT, with delays due to non-excusable causes resulting in financial penalties. The solicitation closes on August 10, 2026, and is issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, with primary contact provided via Navy email and phone.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

PRIMER COATINGThis contract mandates the supply of PRIMER COATING under a fixed-price arrangement with stringent quality and security requirements, issued under Emergency Acquisition Flexibilities. The item, identified by NSN 8010-015652617 and quantity of 2500 units, must conform to MIL-I-45208 inspection standards and MIL-STD-130 marking specifications, with ISO 9001 certification accepted as an alternative to MIL-I-45208. The contractor must hold a valid U.S. security clearance of at least confidential level due to access requirements for classified documents including NAVSEA 690-6726598 and NAVSEA 690-6726597, both marked Confidential. All classified material must be processed exclusively at the Valencia, CA facility (CAGE 0G1Z3); the Mount Laurel, NJ site (CAGE 22354) is prohibited from handling any classified content. The contract requires a DD Form 254 and imposes a national defense priority rating under the Defense Priorities and Allocations System. The material must be mercury-free with no contamination, and any use of mercury requires prior written approval with detailed safeguards and warning labeling. Compliance with Buy American provisions, Small Business Subcontracting Plan requirements, and Contractor Purchasing System Administration standards are mandatory, with all contractual documents deemed issued upon electronic transmission. The contractor is fully responsible for inspection and quality assurance, maintaining systems that ensure adherence to all contract specifications, with inspection records retained for four years after final delivery. Packaging must comply with MIL-STD-2073, and any alteration to design, material, or part number requires prior written approval with detailed documentation. The solicitation is issued with a narrow response window closing on July 27, 2026, and an award will be bilateral, contingent on the contractor’s written acceptance. Access to supporting documents must be requested through SAM.gov, and all inquiries should be directed to Alison N. Bruker at the provided Navy email address. The procurement is administered by NAVSUP Weapon Systems Support in Mechanicsburg, PA, with the final contract subject to compliance with all applicable federal regulations, including FAR 52.209-1 and the Security Prohibitions and Exclusions applicable to classified work.

Paint and Coating Manufacturing

POSTED

about 10 hours ago

DEADLINE

48--VALVE,SAFETY RELIEF, IN REPAIR/MODIFICATION OFThis contract is a fixed-price repair requirement for the VALVE, SAFETY RELIEF, issued under solicitation N0010426QYAC6 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA. The contractor must restore the valve to “A” condition in accordance with original manufacturer specifications, drawings, and approved technical procedures, with all work governed by strict quality assurance protocols including MIL-STD-130 marking requirements and full inspection responsibility borne by the contractor. The contract mandates compliance with a 1-year warranty after delivery and allows 45 days from discovery of defects for corrective action. All repairs must be mercury-free, with strict prohibitions against contamination, requiring specific written approvals for any use of mercury as a functional component and detailed documentation of protective measures. The item must be shipped FOB destination, packaged per MIL-STD-2073, and tracked using unique identification as applicable. The estimated Repair Turnaround Time is 321.2 days, forming an enforceable delivery obligation unless excused by delay. The procurement is fully set aside for small businesses, with mandatory adherence to Buy American Act requirements, limitations on pass-through charges, and full compliance with the Small Business Subcontracting Plan. The contractor must be an authorized distributor of the original manufacturer’s part, evidenced by official documentation submitted with the offer. All documents referenced in the contract, including technical manuals and military standards, must be obtained through designated Government sources and handled according to their Distribution Statements to prevent unauthorized dissemination, particularly those marked NOFORN or “Official Use Only.” The contract requires adherence to the Workflow Pro Mod Assist Module for payment processing and enforces the use of Navy-approved invoice and receiving report procedures. Government inspection rights are reserved throughout performance, and all records must be retained for 365 days after final delivery. Security compliance is governed by recent class deviations, and certification of small business status, annual representations, and compliance with Free Trade Agreements are binding conditions of award.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month

COMPRESSOR,REFRIGERThe contract pertains to the repair of a COMPRESSOR, REFRIGER under solicitation N0010426QLC29, with a required Repair Turnaround Time (RTAT) of 180 days measured from physical receipt of the asset at the contractor’s facility, as logged in the Commercial Asset Visibility (CAV) system. The work must comply with technical specifications, manufacturer documentation, and MIL-STD-130 for marking, and all repairs are subject to Government Source Inspection (GSI). The contract is firm-fixed-price, with no additional cost for accelerated delivery, and freight is FOB Origin, handled by Navy CAV or Proxy CAV. Failure to meet the RTAT results in a per-unit, per-month price reduction, capped at a specified maximum, without precluding other remedies such as default termination. Contractors must confirm their ability to meet the 180-day RTAT or explain capacity constraints, and must provide unit and total pricing, along with comparative new unit pricing and lead time. The contract incorporates mandatory clauses including Buy American Act compliance, cybersecurity maturity model certification requirements, small business subcontracting obligations, and security prohibitions under recent deviations. Contractors must be authorized distributors of the original manufacturer and provide proof of authorization. All documentation, including technical manuals and specifications, must be obtained through designated Navy sources, and distribution of provided materials is governed by specific DOD distribution statements. Records of inspections and testing must be retained for 365 days post-final delivery. The awardee’s CAGE code, inspection location, and any subcontractor facilities must be indicated. Any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer using designated code system classifications. The Government retains full inspection rights, and nonconforming items, including those determined beyond economical repair (BER), may trigger negotiated price adjustments up to an NTE ceiling. All submissions must be made by the deadline of July 27, 2026, to the designated point of contact.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

LAP SEAT, 100 GRITThe contract pertains to the procurement of a LAP SEAT, 100 GRIT, under solicitation N0010426QEB26, with a response deadline of August 24, 2026. The item must be manufactured in strict accordance with drawing 820-8686289, piece number PCT233(100), and part number 820-8686289PCT233(100), with an approved alternate part number listed as 820-5295254PCT233(100) from Puget Sound Naval Shipyard. Technical requirements are governed by a defined order of precedence, with contract amendments taking priority, followed by the schedule, terms and conditions, IRPOD, STRS, drawings, and specifications. The contractor must adhere to the specified revisions of all referenced documents unless written approval is obtained from the contracting officer to use alternative revisions. Compliance with mercury exclusion requirements is mandatory, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied part. Packaging must comply with MIL-PRF-23199, with specific provisions for MIL-DTL-24466 green poly bags when cleanliness controls from MIL-STD-767, MIL-STD-2041, Refueling Clean, or Reactor Plant Clean are invoked; fire retardant packaging is no longer required. The contractor is responsible for maintaining an acceptable government-approved inspection system and retaining complete records of all inspection activities for the duration of the contract and beyond as required. The solicitation is issued by the Navy Supply Systems Command Weapon Systems Support (NAVSUP WSS-MECH) from Mechanicsburg, Pennsylvania, and is subject to various mandatory clauses including cybersecurity maturity model certification, small business program representations under NAICS code 327910, equal opportunity for veterans and workers with disabilities, and a total small business set-aside. A stop-work order provision, transportation by sea requirements, and a priority rating notice for national defense purposes are also incorporated. Contractual documents are considered issued upon electronic transmission such as email or fax, and pricing remains valid for 60 days after the closing date unless otherwise specified. Access to technical documentation, including drawings and specifications, requires prior registration on the Logistics.UNNPP.gov e-commerce portal. Distribution of all Navy-provided documents falls under

Abrasive Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month

CAP ASSEMBLYThe contract pertains to the procurement of a CAP ASSEMBLY under solicitation N0010426QEB31, issued by the Naval Supply Systems Command Weapon Systems Support, Mechanicstown, Pennsylvania. It is a fixed-price contract with mandatory compliance to a strict hierarchical set of technical and quality standards, primarily governed by the Individual Repair Part Ordering Data (IRPOD), which serves as the central technical reference. The contractor must adhere to specified revisions of all referenced drawings, specifications, and standards, and any deviation or waiver must be formally requested and justified with technical data demonstrating no impact on form, fit, or function. All submissions, including pre-manufacturing procedures, vendor certified test reports, and tiered supplier disclosures, must be delivered within 45 days of award and packaged per MIL-PRF-23199 and other invoked military standards, with particular attention to cleanliness controls and packaging materials. The use of mercury or mercury-containing compounds is strictly prohibited. Pricing is valid for 60 days after the closing date and all contractual documents are deemed issued upon electronic transmission. The contract mandates full compliance with government quality assurance systems and documentation requirements, including the use of the DD Form 1423 to define technical data deliverables and inspection acceptance protocols. Distribution of all technical documents is restricted under NOFORN controls, requiring prior approval from the Naval Sea Systems Command for any transfer to foreign nationals. The award is subject to small business representations, cybersecurity maturity certification, defense priority ratings, and full adherence to Appendix A of LSC-2E. All deliveries are FOB destination, payment follows WAFW instructions using combined invoice and receiving reports, and the contractor is required to register and access the BPMI e-commerce portal to obtain required documentation. The contract also enforces strict export compliance, equal opportunity, and security prohibitions, with all submissions requiring separation by contract number, NSN, and item nomenclature.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month

VALVE, GLOBEThis contract pertains to the procurement of a 1/2 inch socket weld in-line stop valve with backseat, per NAVSHIPS drawing 803-2177525, for use in a critical shipboard system where failure could result in catastrophic consequences including loss of life or the vessel. The material is designated as SPECIAL EMPHASIS (Level I) and is subject to stringent traceability, quality assurance, and inspection controls. All components must meet exacting material specifications including ASTM-A105, ASTM-A182, ASTM-A193, ASTM-A194, and MIL-S-24093, with mandatory certification of chemical composition, mechanical properties, and heat treatment for each heat lot. The valve must undergo comprehensive non-destructive and pressure testing, including liquid penetrant or magnetic particle inspection on studs and nuts, dye penetrant inspection of hardfacing, and full assembly pressure testing with strict tolerances. First Article Testing is required on one unit, and contractor certification must include traceable, unqualified statements of compliance verified by electronic signatures meeting strict authentication protocols. Every part requires permanent, legible traceability marking conforming to MIL-STD-792, with unique lot identification preserved throughout all manufacturing and subcontracted operations. The contract mandates strict adherence to a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, or an approved alternative under MIL-I-45208 and MIL-STD-45662, with full government inspection authority at source. All welding and brazing must be performed per S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with procedures and qualification data submitted for prior approval. Subcontractors are bound by the same requirements and must be pre-qualified by the prime contractor. All certifications, including those for hydrogen embrittlement relief, filler metal, and hardfacing, must be complete, signed, and traceable to individual components. Material must be 100% inspected for traceability, conformity, and documentation accuracy, with zero defect acceptance criteria for lot acceptance. The valve must be marked with the prescribed CID number, and no mercury or mercury-containing compounds may be present. The contract is issued under Emergency Acquisition Flexibilities, is DO certified under DPAS for national defense use, and

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE