Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

145893 NORTHERN DISTRICT WATERJET MACHINING CENTER

Active
231189State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The City of Los Angeles is soliciting bids for the Northern District Waterjet Machining Center under Tender #231189, with submissions due by August 20, 2026, at midnight. The contract is managed by the City of Los Angeles Department of Water and Power, with Kevin A. Rudolph listed as the primary contact for inquiries, reachable via email at kevin.rudolph@ladwp.com. The work is to be performed at a location in Los Angeles, California, with the designated zip code 90012. Interested vendors must register on the City’s official procurement portal to participate, and all questions regarding the bid’s language, requirements, or accuracy should be directed to the originating agency. Biddingo.com provides this information solely as a reference and is not responsible for the content of third-party sites linked in the posting. Bidders are advised to review the official solicitation documents through the provided link, as details not fully disclosed here may impact compliance and eligibility.

General Info

Los Angeles seeks bids for waterjet machining center by August 20, 2026, through DWP, location 90012.

Agency

California → City of Los AngelesView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

Los Angeles, CA, CA 90012, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyCalifornia → City of Los Angeles
Contacts1 person available
OfficeN/A
Organization / Agency
California → City of Los Angeles
View Agency Profile
Office AddressN/A
Contacts
Contracting Officer
contact@example.gov

Full Description

Show more
City of Los Angeles 145893 NORTHERN DISTRICT WATERJET MACHINING CENTER Tender # 231189 Closing Date : 08/19/2026 at 17:00 PM Originating Department: City of Los Angeles Contact: RUDOLPH, KEVIN A Email: "> kevin.rudolph@ladwp.com "> "> Details: 145893 NORTHERN DISTRICT WATERJET MACHINING CENTER Disclaimer: This bid is researched and provided for information purposes only. To participate in this bid opportunity, interested vendors are sometimes required to register on the City of Los Angeles's website. Please refer to the originating organization for any information relating to this. Direct all queries pertaining to the language, the content or any missing or inaccurate information within this abstract to its originator, as indicated in the advertisement. Note: When you click on the link below, a new window will open to the site where you can locate more information regarding this bid. You may need to search the site to locate the bid. View Bid Information Biddingo.com is not responsible for the contents of the third party site and does not make any representations regarding the content or accuracy of materials on such third party web sites. If you decide to access them, you do so at your own risk.

Similar Contracts

Same NAICS industry code

NAICS: 332710
New
DIBBS
PROPS PROTABLE PIER
Solicitation # SPE4A5-26-T-314A
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
Federal
Custom Turbomachinery Housing Machining
Solicitation # 80NSSC26940306Q
NASA/NSSC is soliciting capabilities from interested parties for a sole source procurement of Custom Turbomachinery Housing Machining under FAR 12.102(a), as Intelligent Tool Corp has been identified as the sole provider of this specialized service. The contract will be managed by NASA’s Shared Services Center with performance occurring at NASA’s Marshall Space Flight Center, and it will follow commercial item acquisition procedures outlined in FAR Part 12. The North American Industry Classification System code for this effort is 332710. Interested organizations must submit written capabilities and qualifications by 5:00 p.m. Eastern Time on August 4, 2026, to support the government’s determination on whether to proceed without competition; oral communications are not permitted. The NASA FAR Supplement Clause 1852.215-84 on the Ombudsman applies, and information regarding the Center Ombudsman can be accessed via the provided online listing. The primary point of contact for the procurement is Sara Jusino-Terry, with Bobbie Young serving as secondary contact.
NASA Shared Services Center

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332710
New
Federal
Mechanical Fabrication
Solicitation # N6660426Q0201
This is a small business set-aside solicitation for a five-year, multiple-award Blanket Purchase Agreement (BPA) under NAICS code 332710 for mechanical fabrication services, issued as a combined synopsis and solicitation in accordance with FAR Part 12. The opportunity is for firm fixed-price contracts to fabricate build-to-print hardware for the Naval Undersea Warfare Center Division, Newport, in support of electromagnetic and undersea weapons systems. Offerors must respond to a Request for Quotation with proposals organized into three volumes covering pass-fail requirements, technical capability including facilities and manufacturing approach, and past performance. A detailed process plan for each component is not required; instead, offerors must describe their overall manufacturing approach covering production processes, test procedures, material handling, capacity, and surge capability. The BPA will be awarded on a Lowest Price Technically Acceptable basis, with all non-price factors evaluated as either Acceptable or Unacceptable, and only technically acceptable offers will be considered for award. The maximum estimated value of the BPA is $8,362,426, with individual task orders issued on an as-needed basis, each with a minimum value of $1,500, and delivery F.O.B. Newport, Rhode Island. Proposals must be submitted via email to the designated point of contact by 2:00 p.m. EST on August 11, 2026, adhering to strict formatting rules including 12-point Times New Roman font, single spacing, 1-inch margins, and submission in searchable PDF or Microsoft Office formats with no external links. Each component must be properly marked with a Unique Item Identifier if valued at or above $5,000 in accordance with DFARS 252.211-7003, and packaging must comply with MIL-STD-2073-1D, including preservation and corrosion inhibition measures. Deliverables include DD Form 250, Certificate of Compliance, Test/Inspection Reports, and Government Property Inventory Reports per specified CDRLs. Contractors must manage Government Furnished Property in accordance with FAR and DFARS clauses, safeguard Controlled Unclassified Information per DFARS 252.204-7012 and NISPOM, and ensure personnel comply with OPSEC and security protocols. The contractor’s facility must be certified under the Joint Certification Program, and all offerors must maintain an active UEI and CAGE code
Nuwc Division Newport

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
DIBBS
Domestic Precision Manufacturing and AssemblyThe contract involves the manufacture and assembly of defense-related technical components in strict accordance with military specifications, requiring adherence to MIL-STD-130N for item marking and MIL-STD-129 for packaging and labeling to ensure full compliance with Department of Defense logistics and identification standards. Quality control is an integral component of the work, demanding rigorous inspection and documentation throughout the production process to guarantee reliability and functionality in operational environments. The work is classified as a subcontract under NAICS code 332710, and the solicitation originates from the ASC Commodities Division within the Department of Defense, with a response deadline of August 11, 2026, and a posted date of July 29, 2026. No set-aside preferences or specific location details are provided, but performance is expected to meet all federal defense manufacturing requirements without geographic restrictions.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
DIBBS
Precision Machined Disk Component SupplyA precision-machined solid plain disk spacer is being procured under a subcontract to meet the exacting specifications outlined in military technical drawing NR 19200 10885753-1, with full compliance required to the Department of Defense's Master List of Technical and Quality Requirements. The component must adhere to stringent material specifications, dimensional tolerances, and surface finish standards as defined by military-grade guidelines, ensuring performance and reliability in critical applications. The contract is categorized under NAICS code 332710, indicating it falls within the forging and stamping industry, and is administered by the Land Supply Chain under the Department of Defense. The solicitation was posted on July 29, 2026, with a firm response deadline of August 10, 2026, providing potential suppliers a limited window to submit proposals. Although the solicitation number is not listed and specific point of contact details are unavailable, the procurement is accessible via the DIBBS platform at the provided link. The place of performance and organizational details remain unspecified, but the work is expected to be performed in alignment with DoD supply chain protocols, and all delivered units must be certified for conformance prior to acceptance.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332710
New
DIBBS
Precision Machined Component SupplyThe contract seeks the manufacture or supply of precision-machined metal or composite parts for COVER, ACCESS units, requiring adherence to military standards throughout all phases including CNC machining, finishing, and inspection. The work must be performed to exacting tolerances and quality controls typical of defense procurement, ensuring components meet functional, durability, and safety requirements for military applications. The North American Industry Classification System code 332710 indicates this is a precision machining activity within the fabricated metal product manufacturing sector. This is a subcontract opportunity issued by the Department of Defense under the LAND SUPPLY CHAIN organization, with a response deadline of August 10, 2026, and a posted date of July 29, 2026. Performance is required at the specified location in Texarkana, Texas, with a zip code of 75507-5000. While no specific set-aside designation or point of contact is provided, the solicitation is accessible through the DIBBS platform under reference number SPE7L126T890Q, and potential bidders must meet all technical and compliance requirements associated with defense-grade precision machining.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Sleeve Bushings (NSN 5365015852164)The contract requires the manufacture and delivery of precision sleeve bushings identified by NSN 5365015852164, strictly adhering to U.S. government specifications for dimensional accuracy, material composition, and performance standards. Traceability is mandatory throughout the production process, ensuring full documentation of raw materials, lot numbers, inspection records, and quality control measures to meet military compliance requirements. Packaging must comply with federal standards for protection during transit and storage, including labeling, containment, and environmental safeguards to prevent damage or contamination prior to delivery. Delivery is specified as FOB Destination to designated military installations, meaning the supplier assumes all responsibility for transportation, handling, and risk until the goods are received at the final location. The contract falls under NAICS code 332710, indicating classification as a precision machining subcontract, and is administered by the Defense Logistics Agency under the Department of Defense. Although the solicitation number and point of contact are not provided, the contract is accessible via the DIBBS system under award number SPE7LX22D0068 and delivery order SPE7L126FAY1A, with the posting date indicating it was issued in July 2026 for future fulfillment.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Trammeled Measurement Tool (Tram Mel Bar)A single precision measurement tool known as the Tram Mel Bar is being custom manufactured to meet strict military specifications under a subcontract awarded by the ASC Commodities Division of the Department of Defense. The work must strictly adhere to technical drawings and quality standards defined by military requirements, ensuring the final product meets exacting performance and durability benchmarks. The manufacturer is required to deliver a tool that fulfills precise dimensional and functional criteria essential for military applications. The solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026, and the place of performance is set at Jacksonville, Florida, with a ZIP code of 32212-5000. The North American Industry Classification System code for this procurement is 332710, identifying it as a precision machining activity. The contract is classified as a subcontract, indicating it is part of a larger procurement effort, and no set-aside provisions have been specified. All work must be completed in compliance with the technical and quality demands outlined by the government, with delivery expected to support critical military measurement operations.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332710
New
Federal
Precision Machining of Traverse & Elevation Assembly ComponentsThe contract calls for the manufacture of high-precision metal components designated for the Traverse & Elevation Assembly with NSN 1005-01-592-1520, requiring advanced machining operations including milling, turning, drilling, and finishing to meet stringent military-grade tolerances. The work demands strict adherence to quality standards and dimensional accuracy typical of defense-grade production, ensuring components function reliably under operational conditions. This is a subcontract opportunity set aside exclusively for small businesses under the SBA’s Total Small Business Set Aside program, with the NAICS code 332710 classifying it under precision manufacturing services. The opportunity was posted on July 29, 2026, with a response deadline of August 13, 2026, at 5:00 a.m. ET, indicating a limited window for qualified small businesses to submit proposals. The contracting activity falls under the Department of Defense via the office identified as W6QK Acc- Dta, and while specific location details for performance or contact are not provided, the work is expected to be conducted by the selected small business contractor in alignment with defense supply chain requirements. All submissions must demonstrate capability to meet the technical specifications and regulatory compliance necessary for military hardware.
W6QK Acc- Dta

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 332710
New
Federal
Precision CNC Milling of F-16 Wing SkinsThe contract calls for high-precision CNC milling of F-16 lower wing skins with strict requirements to maintain a uniform Inner Mold Line thickness while ensuring the Outer Mold Line and all critical hole patterns remain untouched and intact. This work is essential for structural integrity and aerodynamic performance, requiring advanced machining capabilities and strict quality control procedures. The task demands expertise in aerospace-grade materials and the ability to meet tight tolerances without compromising part geometry or historical specifications. This is a Small Business Set Aside under NAICS code 332710, specifically designated for total small business participation, and is managed by the Department of Defense under the agency FA8228 Afsc Ol H Pzim. Performance is required at Hill Air Force Base with a zip code of 84056. The solicitation was posted on July 29, 2026, and responses must be submitted by August 28, 2026, by 5:30 a.m. local time, positioning it as a time-critical subcontracting opportunity targeted exclusively at qualified small businesses capable of delivering precision aerospace component manufacturing.
FA8228 Afsc Ol H Pzim

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 332710
New
Federal
F-16 Wing Skin Milling BPA
Solicitation # FA822826R0006
The contract is for a five-year Basic Ordering Agreement to procure F-16 Wing Skin Milling Services in support of the 309th Engineering and Maintenance Group, with the solicitation number FA822826R0006 and a posted date of July 29, 2026. The opportunity is a Small Business Set Aside, meaning only small businesses are eligible to respond, and the NAICS code 332710 identifies it as a precision machining and metal fabrication service. Responses are due by August 28, 2026, at 5:30 a.m. MST, and the work will be performed at Hill Air Force Base in Utah. The contract is issued by the Department of Defense under the Air Force Sustainment Center, with the office located at Hill AFB, UT 84056-5805. Primary point of contact is Michael Checketts, reachable at 801-586-6638 or michael.checketts@us.af.mil, with Merrick Flygare as the secondary contact at 801-775-2223 or merrick.flygare@us.af.mil. The full solicitation can be accessed via the SAM.gov workspace link provided, and the procurement is classified as a combined solicitation under federal acquisition regulations. All potential offerors must meet small business size standards and have the technical capability to perform high-precision milling on F-16 wing skin components to fulfill the government’s maintenance and modernization needs over the contract term.
FA8228 Afsc Ol H Pzim

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 332710
New
Federal
53--PIN
Solicitation # N0010426PAC27
The contract involves the procurement of 63 units of a component identified as 53-PIN with NSN 6X-5315-LWM026657, under TDP VER 004, for delivery to two designated military locations: N63402 at Strategic Weapons Facilities Pacific in Silverdale, Washington, and N68733 at the Trident Refit Facility in Kings Bay, Georgia. The supplier will be Ridge Machine Shop Inc. located in Halifax, Pennsylvania. This is a presolicitation notice indicating the government intends to award the contract through single-source negotiation without competitive bidding, as the acquisition falls under A/RMSC 1 or 2, which permits non-competitive awards due to exclusive source capability or other valid justifications. The government asserts full rights to all technical data with no restrictions on engineering, tooling, or manufacturing, and the data package is complete. While interested parties may submit interest or quotes prior to award, the decision not to conduct full and open competition rests solely with the government, and any responses received will only be used to evaluate potential competition. The solicitation is managed by the Navsup Weapon Systems Support Mech office in Mechanicsburg, Pennsylvania, with Amanda R. Hayward as the primary point of contact for inquiries.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

N/A
View Details

More opportunities from California → City of Los Angeles

Same awarding agency

NAICS: 237120
New
SLED
146421 BUS PIPE
Solicitation # 231183
The City of Los Angeles has issued solicitation number 231183 for 146421 BUS PIPE, with a submission deadline of August 6, 2026, at midnight. This procurement opportunity is managed by the originating department and is open to vendors interested in supplying the specified pipes, with all inquiries directed to Nizar Faruk at nizar.faruk@ladwp.com. The place of performance is identified as Los Angeles, CA 90012, and interested parties are advised to register on the City of Los Angeles’s official website to participate, though the contracting officer listed on the Biddingo platform is Iubani with email iubani@biddingo.com. Biddingo provides this information as a reference only and disclaims responsibility for the accuracy or completeness of content on external sites accessed through the provided link. No specific set aside or NAICS code is indicated, and bidders must verify all requirements directly with the agency prior to submission.
Oil and Gas Pipeline and Related Structures Construction

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335311
New
SLED
8059R1 TRANSFORMER, 33.8KV TO 12.47KV, 18/24/30-MVA, 3-PHASE, FOR DS-29
Solicitation # 231214
The City of Los Angeles is soliciting bids for a three-phase transformer rated for 33.8 kV to 12.47 kV with dual capacities of 18, 24, and 30 MVA, specifically designated for use with DS-29. The solicitation, identified as Tender #231214, has a deadline for responses set for August 28, 2026, at midnight, with the posting date listed as July 30, 2026. This procurement is managed by the City of Los Angeles Department of Water and Power, with Kevin A. Rudolph listed as the primary contact for inquiries, reachable via email at kevin.rudolph@ladwp.com. The transformer is required for installation within Los Angeles, with the place of performance specified as CA 90012. Vendors interested in participating are expected to register on the City’s official procurement platform to access full solicitation documents and submit compliant bids. All questions regarding the technical specifications, submission requirements, or contract terms must be directed to the originating department, as Biddingo.com provides only informational support and bears no responsibility for the accuracy or completeness of external site content.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

1 day ago

DEADLINE

in 28 days
View Details
NAICS: 237310
New
SLED
E1909515 - SIDEWALK REPAIR PROGRAM PACKAGE NO. 86 (LA 28)
Solicitation # 231068
The City of Los Angeles is soliciting bids for Package No. 86 of its Sidewalk Repair Program under Tender #231068, with a closing date of August 19, 2026, at 3:00 PM. This Design-Bid-Build project involves the remediation of 57 pedestrian sites—49 Access Request Sites and 8 LA28 Program Access Improvements sites—to ensure full compliance with current Americans with Disabilities Act standards. Work includes the replacement of sidewalks, driveways, curb and gutter systems, installation of new curb ramps, asphalt and concrete repairs, tree management such as removal and root pruning, landscape restoration, removal and replacement of roll gates and tracks, adjustment of utility boxes and vaults to grade, and the removal and reinstallation of water meters. The project is located within Los Angeles, and all performance must occur in the designated area with a zip code of 90012. Bidders must register on the City of Los Angeles’s official website to participate, and all inquiries regarding bid language, content, or inaccuracies should be directed to the originating department. Contact for this solicitation is David Nguyen, reachable at david.nguyen@lacity.org, and the bid must be submitted by the stated deadline.
Highway, Street, and Bridge Construction

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 811310
New
SLED
141954R1 Beacon BESS - Specialized Maintenance Services
Solicitation # 231186
The City of Los Angeles is soliciting specialized maintenance services for the Beacon Battery Energy Storage System under solicitation number 231186, with a response deadline of August 28, 2026. The contract is assigned to the Department of Water and Power and centers on ensuring the ongoing operational integrity and safety of the Beacon BESS facility located in Los Angeles, CA 90012. Vendors interested in bidding must register through the City’s official portal and are advised to verify all requirements directly with the originating agency, as this opportunity may involve specific technical, safety, or compliance protocols unique to energy storage systems. The point of contact for inquiries is Jamie L. Vasquez at jamie.vasquez1@ladwp.com, and all communications must align with the official guidelines provided by the City. This solicitation does not specify a set-aside type or NAICS code, indicating it is open to qualified vendors regardless of business size or classification, though adherence to local procurement regulations is mandatory. The contract emphasizes specialized expertise in battery energy storage technology, requiring providers to demonstrate experience with maintenance, diagnostics, and preventive services for large-scale battery systems. All submissions must comply with the City’s procedural standards and deadlines, as outlined in the official posting, and bidders are solely responsible for verifying the accuracy and completeness of bid materials, as third-party sources provide only informational summaries. Bidders should ensure they access the official bid portal for full documentation and terms.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 28 days
View Details
NAICS: 423310
New
SLED
Lumber Douglas Fir REBID of Bid No. F-1256
Solicitation # 231179
The City of Los Angeles is rebidding Solicitation No. 231179 for Douglas Fir lumber under Bid No. F-1256, with a response deadline of August 21, 2026 at midnight. The solicitation is managed by the City of Los Angeles and is intended for vendors supplying lumber for municipal use, with performance located in Los Angeles, California, specifically at ZIP code 90012. Bidders must register on the City’s official procurement portal to participate, and all inquiries regarding the bid’s terms, specifications, or requirements must be directed to the originating agency, as the provided details are for informational purposes only. The contracting officer for this opportunity is listed with the email iubani@biddingo.com, but vendors are advised to verify all information directly through the City’s official channels, as third-party platforms like Biddingo.com do not guarantee the accuracy or completeness of the bid data. The posting does not specify a set-aside classification or NAICS code, and interested parties are responsible for conducting thorough due diligence before submitting proposals.
Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 21 days
View Details
NAICS: 541380
New
SLED
TOS No. 20-166A - Slauson Connect Business Incubator and Work Resource Center - Construction Phase
Solicitation # 231034
The City of Los Angeles is soliciting consultant services for the construction phase of the Slauson Connect Business Incubator and Work Resource Center under Tender #231034, with a submission deadline of August 14, 2026, at 3:00 PM. The Bureau of Engineering’s Geotechnical Engineering Division is seeking a qualified firm to provide comprehensive geotechnical support including review of plans and reports, on-site observations and testing during construction conducted by a Deputy Grading Inspector or Field Technician, laboratory testing of soil samples, and the preparation of two compaction reports. All work is to be performed at the project site in Los Angeles, CA 90012, and the consultant must ensure compliance with municipal standards for geotechnical integrity during grading and construction activities. Bidders are responsible for registering on the City of Los Angeles’s official procurement portal to participate, and all inquiries regarding the bid’s language, requirements, or inaccuracies must be directed to the originating department contact, Easton Forcier. The solicitation does not specify a set-aside classification or NAICS code, and interested parties should verify eligibility and procedural details directly through the City’s systems. While bidding information is accessible via a third-party link, the City of Los Angeles is the sole authoritative source for official documents, and bidders assume all risk associated with using external websites for bid-related data.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 532310
New
SLED
145827 OFFICE TRAILER FOR MAIN ST. BUILDING 7A
Solicitation # 231209
The City of Los Angeles is soliciting proposals for the provision of an office trailer to be installed at Main Street Building 7A, under solicitation number 231209, with a response deadline of September 1, 2026. The contract is managed by the City of Los Angeles Department of Water and Power, with Daisy Curaming listed as the primary contact for inquiries, reachable via email. The trailer is intended for temporary office use at a specific location in downtown Los Angeles, with the place of performance identified as zip code 90012. Vendors interested in participating must register on the City of Los Angeles’ official procurement portal, as direct bidding through third-party platforms is not sufficient for eligibility. All questions regarding the bid’s language, requirements, or missing details must be directed to the originating agency, as the provided information is for reference only and may not reflect the complete or official solicitation. Biddingo.com, which hosts the link to bid details, disclaims responsibility for the accuracy or content of external site data, and participants are advised to access the official sources at their own risk.
General Rental Centers

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 423690
New
SLED
145794 MOTOROLA RADIO COMMUNICATION EQUIPMENT AND RELATED ACCESSORIES
Solicitation # 231143
The City of Los Angeles is soliciting bids for Motorola radio communication equipment and related accessories under Tender #231143, with a response deadline of August 14, 2026. The contract is managed by the originating department and coordinated through Justin Lin at justin.lin@ladwp.com, with all technical and operational inquiries directed to the city’s official channels. Vendors interested in participating must register on the City of Los Angeles’s procurement website to be eligible, and any discrepancies or clarifications regarding the bid language or content must be addressed directly with the originating agency. The place of performance is listed as Los Angeles, CA 90012, and while no NAICS code or set-aside type is specified, the solicitation is classified as a local government procurement opportunity. All additional details, including specifications and submission requirements, are available through the provided link, though Biddingo.com disclaims responsibility for third-party site content or accuracy.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 423940
New
SLED
270000910001,RFB,40,2 - POSTS, MARKERS, TRAFFIC SAFETY EQUIPMENT
Solicitation # 231134
The City of Los Angeles is soliciting bids for the supply of posts, markers, and traffic safety equipment under solicitation number 231134, with a response deadline of August 12, 2026, at 2:00 PM Pacific Time. This procurement is managed by the City’s originating department, with Cesar Cobian as the primary point of contact, reachable at cesar.cobian@lacity.org. The contract is intended for the delivery of essential traffic safety infrastructure components that support public safety and transportation infrastructure within Los Angeles, with performance expected to occur at the designated location in CA 90012. Interested vendors must ensure they meet all eligibility requirements and may be required to register on the City of Los Angeles’s official procurement portal to participate. Bidders are advised that while general information is provided, full details and official documents must be accessed through the City’s external procurement website, as this abstract is for informational purposes only and does not constitute a complete or binding solicitation. The posted date for this opportunity is July 29, 2026, and although the solicitation does not specify a set-aside classification or NAICS code, vendors should review the original source material to confirm compliance with all terms, conditions, and registration procedures. Any questions regarding the bid’s language, requirements, or content should be directed to the originating agency, and Biddingo.com disclaims responsibility for the accuracy or completeness of third-party content linked from their site.
Jewelry, Watch, Precious Stone, and Precious Metal Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 334514
New
SLED
145991R1 Meter Test Equipment and Accessories
Solicitation # 231138
The City of Los Angeles is soliciting bids for Meter Test Equipment and Accessories under solicitation number 231138, with a response deadline of August 12, 2026. The contract is managed by the Department of Water and Power and requires vendors to submit proposals for specialized equipment used in testing water meters, along with necessary accessories to support accurate calibration and maintenance operations. All performance activities are expected to occur within Los Angeles, specifically at the 90012 zip code location. Interested parties must register on the City’s official procurement portal to participate, and all questions regarding bid language, requirements, or discrepancies must be directed to the originating department contact, Justin Lin at justin.lin@ladwp.com. The bid is open to qualified suppliers without specific set-aside designations, and while general information is provided, full details are available only through the City’s official channels. Biddingo.com is not responsible for the accuracy or completeness of external site content linked from this posting.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 237990
New
SLED
BEST VALUE | RFQ/BID #2710031 WESTMINSTER EEC | OUTDOOR CLASSROOM & CAMPUS UPGRADE (BV)(PSA)
Solicitation # 231144
The City of Los Angeles is soliciting bids for the Outdoor Classroom and Campus Upgrade project at Westminster EEC under solicitation number 231144, following a best value procurement process. The project aims to enhance outdoor educational spaces and campus infrastructure, with a required response deadline of August 12, 2026, at 5:00 PM, although the system lists August 13, 2026, as the official closing date. The work is to be performed at the Westminster EEC location in Los Angeles, CA 90012, and interested vendors must register on the City of Los Angeles’s official procurement portal to participate. The originating department is the City of Los Angeles, and all inquiries should be directed to Remil Mangali at remil.mangali@lausd.net. This opportunity is not subject to a specific set-aside program, and while NAICS codes are not provided, it falls under local government infrastructure improvement. Bidders are advised to verify all details through the official city channels, as third-party platforms like Biddingo.com provide only informational summaries and are not responsible for the accuracy of external content.
Other Heavy and Civil Engineering Construction

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 238170
New
SLED
JEDI Zone Facade Improvement Program Pacific Boulevard Construction and Fabrication RFB
Solicitation # 231092
The City of Los Angeles is soliciting bids for the JEDI Zone Facade Improvement Program on Pacific Boulevard, focusing on construction and fabrication work aimed at enhancing building exteriors within the designated area. The solicitation, numbered 231092, was posted on July 29, 2026, with a response deadline of August 15, 2026, at 3:00 AM, requiring interested vendors to submit proposals by this time to be considered. All work is to be performed in the 90012 zip code area of Los Angeles, California, and participation may necessitate registration on the city’s official procurement portal. The contract is managed by the City of Los Angeles, with Drew Lords listed as the primary point of contact for program details, though official bid inquiries should be directed to the contracting officer listed as iubani@biddingo.com. Vendors are advised to verify all requirements directly through the city’s systems, as this posting serves only as an informational summary and does not substitute for the official solicitation document. Biddingo.com disclaims responsibility for the accuracy or completeness of third-party content linked from this notice.
Siding Contractors

POSTED

2 days ago

DEADLINE

in 15 days
View Details