15-Ton Dump Truck
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
This contract solicits quotes for the procurement of a single 15-ton diesel-powered dump truck intended for use by the U.S. Government in earthworks, with delivery to Warrior Base in Paju, South Korea, within 180 calendar days of the order. The vehicle must be left-hand drive and equipped with features including an electrical tilt cab, rearview camera, automatic grease system, ZF 12-gear automatic transmission, button start, and heating and air conditioning. It must comply with Korean Motor Vehicle Safety Standards and meet specific dimensional and technical specifications such as a minimum overall length of 7,000 mm, width of 2,450 mm, height of 3,300 mm, engine capacity of at least 10,000 cc, and seating for at least two occupants. Additional requirements include artificial leather seats, seat belts on all seats, LED working and strobe lights, ABS with ASR brake system, PTO gearbox, reinforced cargo bed with metal plating, snowplow bracket, PA system, and an LED bar on the cabin roof. The contractor must provide on-site training at delivery and a three-year full warranty covering maintenance and repairs. The solicitation requires all offerors, including those from the U.S., to comply fully with the Republic of Korea’s laws and regulations, including business licensing, labor, taxation, and immigration rules, as mandated by the ROK-U.S. Status of Forces Agreement (SOFA). Offerors not already conducting business locally in Korea must prove authorization and capacity to operate as a local source; failure to demonstrate this in the initial quote will result in disqualification. Vehicles must be delivered door-to-door without additional cost within 300 km of the specified location. Inspection and acceptance will be conducted by an authorized representative upon delivery to ensure conformity with quality, quantity, and condition requirements. The contract ensures the provision of manufacturer certification specifying USFK ownership, as well as operator and technical manuals in Korean and English. The point of contact for this solicitation is located within the Department of Defense’s contracting office based in APO, with deadlines for response clearly outlined.
General Info
Agency
NAICS
Place of Performance
KR-11, 96271, KORSet-Aside
Timeline
Response Deadline
Organization & Contact Information
Full Description
****All sources may submit a quote or quote as applicable. However, the Republic of Korea (ROK)-United States (U.S.) Status of Forces Agreement (SOFA), precludes the U.S. Government from granting Invited Contractor or Technical Representative status to any offeror, for this requirement. All sources submitting a quote or quote, as applicable, including U.S. sources, must already have, or obtain the requisite business licenses directly from the ROK Government, and conduct business in accordance with all applicable ROK laws, including but not limited to, rules and policies regarding labor, taxation, and immigration. Any contractor not already doing business in Korea as a local source, must submit adequate verification in its initial quote or quote, that it has the requisite authorization and capacity to compete for the requirement as a local source, and to perform the contract as a local source. If an initial quote does not fully demonstrate this authorization and capacity, it will not be further considered for award. Whether an offeror qualifies as a local source shall be determined by the Contracting Officer.******
VEHICLE SPECIFICATIONS
A. ITEM 0001.
15Tdum truck, diesel-powered, left-hand drive, electrical tilt cab, rear view camera, auto grease system, ZF12 Gear transmission, button start, and heat/air conditioner
- Quantity: One (1)
Note: Vehicles and furnished accessories shall comply with Korea Motor Vehicle Safety Standard in effect on the date of manufacture. The Government reserves the right to accept alternate specifications as noted below.
B. DIMENSIONS
Overall Length (mm) Minimum 7,000
Overall Width (mm) Minimum 2,450
Overall Height (mm) Minimum 3,300
Engine (cc): Minimum 10,000
Transmission: Auto ZF 12 Gear
Seating Capacity Minimum 2
C. REQUIREMENTS.
(1) Seat Belts: Shall be installed on all seats
(2) Seats: Artificial leather seats
(3) LED working light, LED strobe rectangular light
(4) Brake: ABS with ASR
(5) PTO gearbox on transmission
(6) Button Start & Smart Key
(7) Electrical Power Tilt Cab System
(8) Rear view Camera
(9) Auto Grease System
(10) Reinforced cargo bed with metal plates:
- Floor: 9T
- Side wall: 6T
- Rear door: 9T
- Read door frame: 6T x 6T
- Rear safety bumper
(11) Bracket for Snowplow attachment and installment of controller
(12) LED bar on cabin top: 1250mm(L) X 300mm(W) X 129mm(H)
(13) PA system: Amp, Speaker (Max. 135dB) and Mic install
(14) On-the-spot training at the time of delivery for end users reference operation of equipment
(15) Warranty: 3 years from the date of delivery. During the warranty period, the contractor shall provide maintenance service on the warranty guaranteed parts with 100% coverage at no cost. If repairs cannot be performed on the spot, the contractor is responsible for moving vehicles to their facility.
(16) Certification and Technical Publications (In Korean):
a. Certificate of manufacturer for each vehicle that specifies USFK as the vehicle’s owner.
b. Operator’s manual & technical manual (parts catalog, service manual, electrical scheme) in Hangul & English in a books and digital files for end users.
D. INTENDED USE. The vehicles covered by specifications are intended for general use by the U.S. Government in earthworks. The vehicles furnished hereunder shall be delivered ready for immediate use.
E. SAFETY. New vehicles shall comply with Korean domestic safety and exhaust emission control requirements.
F. DELIVERY POINT. Door-to-Door delivery. The place listed below may be changed within 300km without any additional cost to the government.
Warrior Base (Paju), ATTN: Mr. Taylor, Joseph D. (0503-322-3262)
G. DELIVERY DATE. The vehicles shall be delivered to the delivery point specified above within 180 calendar days after delivery order is issued.
H. INSPECTION AND ACCEPTANCE. The receiving officer or his authorized representative at the respective delivery point shall conduct inspection for condition, quality, quantity count, and final acceptance of the supplies delivered under this delivery order.