Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

15--WING ASSEMBLY,AIRCR- AND SIMILAR REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF

Active
N0038326RTC15Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Navy’s Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS) in Philadelphia intends to award a sole-source contract for the repair of two flight-critical wing assembly parts: NSN 1560-016002718 with part number 74A140001-1035 and NSN 1560-016002719 with part number 74A140001-1036, with a total quantity of ten units each. Delivery will be FOB origin, and the work requires engineering source approval due to the specialized design, proprietary technical data, and unique manufacturing or repair knowledge held exclusively by previously approved sources. The Government has determined that no other source possesses the necessary data or capability to maintain part quality, and the time required to qualify an alternate source would delay delivery beyond operational needs. Only previously approved sources have been solicited, and any new offeror must submit comprehensive source approval documentation in accordance with NAVSUP WSS brochures, including evidence of experience with similar items or proof of pending approval. Proposals lacking complete documentation or verification of prior submission will be disqualified. The solicitation number is N0038326RTC15, with a response deadline of September 21, 2026, and the point of contact is Christina M. Foley. While this is a presolicitation notice not intended for competitive bids, all responsible sources may submit capability statements within 45 days, and the Government retains full discretion on whether to proceed with sole-source award. The contract is subject to applicable trade agreements including the Buy American Act and the World Trade Organization Government Procurement Agreement.

General Info

Sole-source repair for ten each of two flight-critical wing parts, exclusive proprietary knowledge required, FOB origin, response due September 21, 2026.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA

Full Description

Show more
NSN 7R-1560-016002718-QE, TDP VER 001, QTY 10 EA, DELIVERY FOB ORIGIN. NAVSUP Weapon Systems Support (NAVSUP WSS) Philadelphia intends to solicit on a sole source basis for the repair of the following items: QTY: 10, NSN 1560 016002718, P/N 74A140001-1035, WING ASSEMBLY,AIRCR QTY: 10, NSN 1560 016002719, P/N 74A140001-1036, WING ASSEMBLY,AIRCR This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing/repair knowledge by the qualified source(s) require acquisition/repair of the part from the approved source(s). The approved source(s) retain data rights,manufacturing/repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The subject item requires Government source approval prior to contract award, as the item is flight critical and/or the technical data available has not been determined adequate to support acquisition via full and open competition. Only the source(s) previously approved by the Government for this item have been solicited. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in one of the NAVSUP Weapon Systems Support (NAVSUP WSS) Source Approval Information Brochures listed below. Spares: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Sup port/Business-Opps/ Repair: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP -Weapon-Systems-Support/Business-Opps/technical data required to be submitted based on your company's experience inproduction of the same or similar item, or if this is an item you have never made. If your request for source approval is currently being evaluated at NAVSUP WSS submit with your offer a copy of the cover letter which forwarded your request for source approval. Offers received which fail to provide all data required by the Source Approval Brochure or document previous submission of all data required by the Source Approval Brochure will not be considered for award under this solicitation. Please note, if evaluation of a source approval request submitted hereunder cannot be processed in time and/or approval requirements preclude the ability to obtain subject items in time to meet Government requirements, award of the subject requirement may continue based on Fleet support needs. The NAVSUP WSS Commercial Item Identification Brochure is now available at: "https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Support/Bus iness-Opps/" The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. All responsible sources may identify their interest and capability to respond to the requirement or submit proposals, quotations or capability statements. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days (30days if award isissued under an existing Basic Ordering Agreement (BOA) afterdate ofpublication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.One or more of the items under this acquisition is subject to: Free Trade Agreements, if DFARS clause 252.225-7036 Buy American Act--Free Trade Agreements--Balance of Payments Program, is included in the solicitation. The World Trade Organization Government Procurement Agreement and Free Trade Agreements, if DFARS clause 252.225-7021 Trade Agreements, is included in the solicitation.

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
Federal
48--RUPTURE DISK ASSY, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAEW
The contract pertains to the procurement of five rupture disk assemblies, identified by NSN 7H-4820-016756159 and NV822184-5, to be delivered to DLA Distribution Norfolk, Virginia. The Government has determined that it cannot procure this item from alternate sources due to proprietary data restrictions and has deemed it uneconomical to acquire the necessary design rights or to reverse engineer the component. This procurement is being conducted under FAR 6.302-1 as a sole-source action, with no expectation of competition unless responses to this notice demonstrate capability and qualification that justify opening the acquisition to multiple offerors. All responsible parties may submit proposals or capability statements within 45 days of the notice publication, or 30 days if awarded under an existing Basic Ordering Agreement. The Government retains full discretion to decide whether to proceed with non-competitive award based on submitted information, and any award will be contingent on the offeror, product, or manufacturer meeting all applicable qualification requirements at the time of award. The solicitation number is N0010426QYAEW, posted on August 5, 2026, with a response deadline of September 21, 2026, and is classified as a Small Business Set Aside with total set-aside intent. The contracting office is the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, with Dianne Wydra listed as the primary point of contact for technical and procedural inquiries. Technical documentation such as specifications, qualified product lists, and military handbooks may be accessed via the ASSIST-Online portal or through DODSSP, though proprietary drawings, patterns, and deviation lists are not available through these channels. Individuals without internet access may request documents via phone or mail to the DODSSP in Philadelphia. This action is strictly for supply procurement and does not involve service provision or data acquisition rights from the original manufacturer.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811310
New
Federal
AC Motor Repair
Solicitation # N3904026Q5786
The Portsmouth Naval Shipyard Detachment at Naval Base Point Loma in San Diego, California is seeking qualified vendors to repair an AC motor, requiring access to specific NAVSEA technical drawings and the Government’s Property Management System to properly account for Government Furnished Property. Vendors must be located within a reasonable driving distance of the installation to facilitate timely and efficient service delivery. The solicitation, identified as N3904026Q5786, was posted on August 5, 2026, with responses due by August 6, 2026, and no set-aside restrictions apply. The effort falls under NAICS code 811310 for industrial and commercial machinery and equipment repair. Interested parties must submit a completed Request for Quote with all required documentation to the designated contact at the Portsmouth Naval Shipyard, which is administratively managing the procurement despite the work being performed in California. Primary point of contact for inquiries and submissions is Alyssa Scarelli, reachable by phone at 207-994-0740 or email at alyssa.a.scarelli.civ@us.navy.mil. The physical office listed for the contracting activity is in Portsmouth, New Hampshire, but the performance location is strictly at the San Diego facility. All submissions must be directed to the recipient specified in the Request for Quote, and vendors are directed to review the attached documentation for detailed technical and procedural requirements. Participation requires full compliance with government property handling protocols and the ability to execute repairs using authorized technical specifications.
Portsmouth Naval Shipyard Gf

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 811310
New
International
Rideau Committee Room-Elevator Modernization
Solicitation # WS5812820445
The Government of Canada, through Public Works and Government Services Canada, is soliciting bids for the modernization and upgrade of two passenger elevators located in the Rideau Committee Room within the National Capital Region to ensure compliance with CSA code requirements. The scope of work includes installing a new elevator cab communication system and surveillance camera, adding a mechanical room cooling system, upgrading interior cab finishes, mounting smoke detectors, and performing maintenance in the elevator pit. Participation requires a mandatory site visit, and all attendees must hold a valid Secret security clearance or undergo screening for access. Submit attendees’ full legal names, dates of birth, and company names to the Contracting Authority by August 5th, 2026 at 2:00 p.m., and ensure each individual brings valid government-issued photo identification for entry. The solicitation is issued under reference number WS5812820445 and is accessible via SAP Ariba, where suppliers must register or log in, complete their Government of Canada profile, and respond to the posting. All inquiries must be submitted through the Event Messages feature, and technical support is available through the CanadaBuys Service Desk. The bid response deadline is August 18th, 2026 at 7:00 p.m., and the contract is classified under NAICS code 811310 for elevator and escalator installation and repair services.
Department of Public Works and Government Services

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 811310
New
SLED
Equipment Upkeep, Repair & Replacement at Corpus Christi State Supported Living Center (CCSSLC)
Solicitation # HHS0017404V2
The Texas Health and Human Services Commission is seeking competitive bids to establish a contract for equipment upkeep, repair, and replacement at the Corpus Christi State Supported Living Center, identified by solicitation number HHS0017404V2. The contract aims to ensure continued operational integrity of facility equipment through routine maintenance, timely repairs, and necessary replacements, with an anticipated start date of September 1, 2026. Bidders must submit responses by August 25, 2026, at 10:30 a.m. Central Time, and all communications and official updates will be posted via the Texas SmartBuy portal. An optional on-site visit is scheduled for August 7, 2026, at 10:30 a.m. at 902 Airport Rd, Corpus Christi, TX 78405, where bidders can review requirements and tour the facility, though attendance is not mandatory and will not affect bid eligibility. Bidders must notify Richard Castaneda or Debbie Salinas if planning to attend the visit. All questions and clarifications must be submitted by August 12, 2026, at 5:00 p.m. Central Time, with official responses provided via addendum posted on the Electronic State Business Daily no later than August 17, 2026. The solicitation is managed by the Health and Human Services Commission, with Isaiah Wilczynski listed as the primary point of contact for procurement inquiries. The contract type is a standard solicitation without a specific set-aside designation, and performance will occur exclusively at the Corpus Christi facility in Texas. Bidders are expected to understand the scope of work through the issued documentation, with the expectation that all services will support the long-term functionality and safety of equipment critical to resident care and facility operations.
Health and Human Services Commission

POSTED

about 22 hours ago

DEADLINE

in 20 days
View Details
NAICS: 811310
New
SLED
MSANK WWTP Blower Service Contract 2026-01
Solicitation # 2026-01
The Municipal Sewer Authority of New Kensington is soliciting bids for a five-year service contract to maintain two Turblex compressors at its Wastewater Treatment Plant, identified as Contract 2026-01. Bids must be submitted electronically through the PennBID platform by September 3, 2026, at 1 PM local time, with no pre-bid conference scheduled. Interested parties must register as plan holders on the designated website to access official bidding documents, which include all addenda and updates; any documents obtained from alternate sources are not considered valid. Each bid must be accompanied by bid security equal to at least 10 percent of the bid amount, submitted as a certified check or bid bond. All inquiries must be made via PennBID, and telephone requests will not be accepted. Bidders are required to comply with state antibid-rigging laws and submit a signed non-collusion affidavit with their bid. Federal and state environmental regulations, particularly those under Pennsylvania Act No. 247 of 1972, apply to the project. Additionally, under Pennsylvania Act 141 of 2022, the Public Works Employment Verification Act, all bidders must use the E-Verify system to confirm the work authorization of all employees involved in the project and provide a completed Public Works Employment Verification Form as a condition for award. Bids must remain open and irrevocable for 60 days following the bid opening date. The Authority retains full discretion to waive minor irregularities, accept any bid or combination of bids it deems most advantageous, or reject any or all proposals without obligation to provide justification.
Westmoreland County

POSTED

about 23 hours ago

DEADLINE

in 29 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 336413
New
Federal
HINGE,AIRCRAFT
Solicitation # N0038326QMB10
The contract pertains to the procurement of HINGE,AIRCRAFT under solicitation number N0038326QMB10, issued by the Naval Supply Systems Command Weapon Systems Support, a Department of Defense agency based in Philadelphia, Pennsylvania. The solicitation was posted on August 5, 2026, with a response deadline of September 4, 2026, and is classified under NAICS code 336413 for Aircraft Parts and Equipment Manufacturing. The point of contact is Jaclyn Dooling, reachable via email and phone number provided, with all communications required to follow formal Navy protocols. Key contractual clauses mandate compliance with the Buy American Act, Free Trade Agreements, and Balance of Payments Program, requiring certification of domestic content and prohibiting undue pass-through charges. Contractors must adhere to security prohibitions, equal opportunity requirements for workers with disabilities, and mandatory use of Workflow Pro for payment processing and reporting. The warranty for non-complex supplies is 12 months, effective 45 days after defect discovery. A priority rating for national defense use is also applicable. Compliance with the AbilityOne program, royalty information disclosures, and annual representations and certifications are strictly required, with all offeror information subject to release under Navy guidelines.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
Federal
49--CABLE ASSY TORPEDO,, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QPC34
The contract solicitation is for a flight-critical cable assembly used in torpedo repair and modification, identified by NSN 7R-4920-015824377-HT, with a quantity of six units to be delivered FOB origin. This item requires exclusive sourcing from previously government-approved suppliers due to proprietary engineering designs, specialized manufacturing and repair capabilities, and technical data that are not economically available to the government. Only sources already validated by the design control activity have been solicited, as alternative suppliers cannot be qualified within the required timeframe without compromising mission readiness. Proposals from non-approved sources must include comprehensive documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, detailing experience with identical or similar items or proof of prior submission for approval. Incomplete submissions will be rejected outright, and award may proceed based on Fleet support needs if source approval cannot be finalized in time. The government has determined this requirement does not fall under FAR Part 12 commercial item acquisition policies, but offers are open for commercial item alternatives if submitted within 15 days. Technical documentation referenced for compliance is accessible through ASSIST-Online or the DODSSP, though drawings, patterns, and deviation lists are not available via these channels. All proposals must be submitted by the response deadline of September 21, 2026, with primary point of contact being Christopher Campellone of NAVSUP Weapon Systems Support in Philadelphia, Pennsylvania.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 7 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 333613
New
Federal
30--SUPPORT,CYLINDER, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QLA56
This solicitation, identified as N0038326QLA56, seeks repair and modification services for a critical flight-critical aircraft launch and recovery component classified as a Critical Safety Item (CSI) requiring engineering source approval from the Naval Air Systems Command. Only pre-approved sources—DRAFTCO INCORPORATED and THE ENTWISTLE COMPANY—are eligible for award, and any new offeror must submit a comprehensive source approval package meeting stringent documentation requirements including configuration drawings, process sheets, production records, and detailed comparative analyses to demonstrate equivalency with approved parts. The item, identified by drawing number 3491AS0504, is used in a system vital to shipboard aircraft operations, where failure could result in catastrophic consequences including loss of life or aircraft, necessitating strict adherence to MIL-STD-130 marking, NAWCADLKE engineering controls, and full compliance with specified repair procedures that must be submitted for prior Navy engineering approval before any work begins. All proposals must include a firm fixed unit price per CLIN with no tiered pricing, submitted by the July 30, 2026 deadline, and remain valid for at least 120 days. Offers will be evaluated primarily on non-price factors—capacity, delivery, and past performance—with price being secondary. Mandatory inspections include 100% inspection of critical characteristics, full 100% inspection of plating, hardness, and non-destructive testing (NDT), and NDT must be performed by NADCAP or ISO 17025-accredited labs. Contractors must facilitate on-site inspections by NAWCADLKE and DCMA representatives, providing all necessary equipment, facilities, and manpower for interim and final inspections, with 14 days' notice required before any inspection. Full quality records must be maintained for seven years and submitted to the Navy’s cognizant technical authority. The contract mandates compliance with Buy American provisions, warranty coverage of 365 days post-delivery with 45 days to report defects, and strict control over manufacturing aids, which the contractor must supply. Failure to meet any source approval, inspection, documentation, or certification requirement will result in disqualification.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332710
New
Federal
CHASSIS,AIRCRAFT
Solicitation # N0038326QPC14
This contract pertains to the repair of a single aircraft chassis, identified by part number 407374-01112 and NSN 015338597, under a sole-source solicitation closed early on August 5, 2026. The work must be performed by an approved contractor at Atec Inc.’s facility in Stafford, Texas, with a required turnaround time of 56 days from receipt of the asset, as recorded in the Commercial Asset Visibility system. The contractor must adhere strictly to the latest technical publications, ensure all repairs restore the item to a Ready for Issue condition, and follow detailed procedures for configuration management, quality assurance, and parts control. All parts used must be new unless otherwise approved in writing by the Procuring Contracting Officer, and cannibalization is prohibited without explicit authorization. The contractor is responsible for providing all tools, materials, and test equipment unless specified as Government Furnished Property. The contract enforces rigorous quality standards compliant with ISO 9001 and SAE AS9100, along with calibration requirements aligned with ANSI/NCSL Z540.3. It includes provisions for Beyond Economical Repair and Beyond Repair determinations, Missing on Induction scenarios, and Over and Above Repair efforts, each requiring prior written concurrence from the Defense Contract Management Agency and the Procuring Contracting Officer before any action is taken. Prices are fixed based on meeting the specified turnaround time, with financial adjustments subject to negotiation if deadlines are not met. The contractor must maintain comprehensive documentation, including process controls and inspection records, for government review, and all modifications to drawings, specifications, or repair sources require formal approval. Delivery must occur via the Navy’s Workflow Pro system, and final payment is tied to government inspection and acceptance. The solicitation emphasizes compliance with Buy American, security, and equal opportunity regulations, and failure to submit all required source approval documentation will result in disqualification.
Machine Shops

POSTED

about 7 hours ago

DEADLINE

in about 2 hours
View Details
NAICS: 336413
New
Federal
15--COVER,ACCESS,AIRCRA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QLA97
The contract pertains to the procurement of a cover assembly, specifically NSN 7R-1560-016860091-QE, with a quantity of four units, to be delivered FOB origin. This item is designated as flight critical, and its acquisition is restricted to previously approved sources due to proprietary manufacturing knowledge, specialized engineering capabilities, and technical data that are not commercially available or economically feasible for the Government to replicate. Source approval must be granted by the Government’s design control activity, and only entities previously vetted and approved may submit proposals. Any new source seeking qualification must submit comprehensive documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, with incomplete submissions resulting in disqualification. The timeline for source approval is typically too lengthy to delay award, and the Government will proceed based on fleet operational needs if approval cannot be secured in time. This solicitation is issued under FAR 6.302-1 as a single-source action and is not a competitive procurement, though responsible parties may express interest and submit proposals within 45 days of the notice period unless awarded under an existing Basic Ordering Agreement, in which case the window is 30 days. All offers must demonstrate compliance with qualification requirements at the time of award per FAR clause 52.209-1. Technical specifications, drawings, and standards referenced are not available through the DODSSP system; users must access them via ASSIST-Online or contact the DODSSP help desk for unavailable documents. The Government is not applying commercial item acquisition policies under FAR Part 12, but parties may still indicate if they can meet the requirement with a commercial item within 15 days. Primary contact for inquiries is Kimberly Flores of NAVSUP Weapon Systems Support in Philadelphia, Pennsylvania, and proposals must be submitted before the September 8, 2026 deadline to be considered.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334418
New
Federal
49--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QLA96
The contract pertains to the acquisition of seven units of a circuit card assembly used in repair or modification applications, with delivery terms set at FOB origin. Due to the flight-critical nature of the item and the lack of adequate technical data to support full and open competition, exclusive sourcing is mandated under FAR 6.302-1, requiring prior Government source approval. Only previously approved sources are eligible to respond, as they possess unique design capabilities, proprietary manufacturing knowledge, and essential technical data that are not economically available to the Government. Any prospective vendor not already approved must submit comprehensive documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, covering either prior experience with similar items or details for new entrants. Proposals lacking complete source approval documentation or evidence of prior submission will be rejected. The Government will not delay award to accommodate new source qualification if timelines preclude it, and award will proceed based on Fleet operational needs. All submissions must be received by September 8, 2026, and responses are only considered if the offeror, product, or manufacturer meets all qualification criteria at the time of award per FAR clause 52.209-1. Market research confirms that commercial item acquisition policies under FAR Part 12 do not apply, though interested parties may still propose commercial alternatives within 15 days. Technical specifications and standards referenced are accessible through ASSIST-Online and DODSSP, with offline requests handled via the DODSSP Help Desk. The acquisition is subject to trade agreements including the Buy American Act—Free Trade Agreements and the World Trade Organization Government Procurement Agreement, as specified in applicable DFARS clauses. The point of contact for qualification inquiries is Kimberly Flores of NAVSUP Weapon Systems Support in Philadelphia, and no competitive solicitation is expected unless the Government determines otherwise based on submissions.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--SLING HOOK,UNDERSLU, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RFB05
The U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, intends to sole source a procurement for the repair of 25 sling hooks identified by part number 06850-02821-042 and NSN 7R-1680-016925943-H5 under the Basic Ordering Agreement N00383-26-G-P401. The requirement is classified under NAICS 336413 and FSC 1680, with delivery occurring FOB origin. No technical data, drawings, or intellectual property rights are available to the Government, which restricts procurement to Sikorsky as the sole source capable of fulfilling the requirement. Source authority is grounded in 10 U.S.C. 3204(a)(1) and FAR 6.302, and the Government confirms that no other suppliers can satisfy the operational need. All responsible entities may submit capability statements, but only Sikorsky is anticipated to respond, and the acquisition will proceed without delay for any pending Source Approval Request. The solicitation will follow FAR Part 15 procedures and will not utilize FAR Part 12 commercial item acquisition policies, as determined by market research. This notice is a presolicitation, not a competitive request, and while proposals received within 20 days of the synopsis date will be considered, they will only inform the decision to proceed with sole source procurement. No small business set-aside is planned, and all submissions must be submitted electronically via email to anna.m.kiessling.civ@us.navy.mil; no telephone inquiries or hard copies will be accepted. The opportunity will be posted on NECO, with a response deadline of September 9, 2026, and the procurement will be conducted entirely through electronic processes.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
DUCT ASSEMBLY,AIR C
Solicitation # N0038326QTC08
The contract is for a DUCT ASSEMBLY, AIR C under solicitation number N0038326QTC08, issued by the Naval Supply Systems Command Weapon Systems Support, a Department of Defense office located in Philadelphia, Pennsylvania. Responses are due by September 4, 2026, and the North American Industry Classification System code is 336413. The contract mandates compliance with numerous federal provisions including the Buy American Act, Free Trade Agreements, and Balance of Payments Program requirements, with specific certifications required for domestic content. Contractors must use Workflow Pro’s Assist Module and adhere to Navy-specific payment and invoicing instructions. Early and incremental deliveries are preferred, and all contractual documents are considered officially issued upon electronic transmission, email, fax, or mail. The point of contact is Destiny N. Wiatr, reachable via email, with a primary phone number provided for inquiries. Additional obligations include compliance with security prohibitions, equal opportunity standards for workers with disabilities, and the mandatory release of offeror information under Navy use of AbilityOne contractor provisions. The contract also enforces priority ratings for national defense and energy programs, and requires adherence to royalty and item unique identification standards. All documents related to this procurement are governed by the government’s official issuance policy, establishing bilateral agreement upon proposal acceptance.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Federal
RETAINER STRIP SET,
Solicitation # N0038326QTC05
The contract pertains to the procurement of a Retainer Strip Set under solicitation number N0038326QTC05, issued by the Naval Supply Systems Command Weapon Systems Support, a Department of Defense agency based in Philadelphia, Pennsylvania. The solicitation was posted on August 5, 2026, with a firm response deadline of September 4, 2026, and is categorized under NAICS code 332722, indicating a manufacturing focus. The contract mandates strict compliance with federal regulations including Buy American provisions, security exclusions, and equal opportunity requirements for workers with disabilities, all effective as of early 2026. It requires adherence to the mandatory use of Workflow Pro Assist Module and specifies Navy-specific payment and documentation procedures tied to the N00383 billing code. Contractors must submit all documentation electronically and conform to government-defined issuance protocols where electronic transmission constitutes official issuance. Early and incremental deliveries are strongly preferred. The point of contact is Destiny N. Wiatr, reachable via email at Destiny.n.wiatr.civ@us.navy.mil, with a phone number listed as 215-697-3528. Additional contractual clauses include provisions for royalty information, priority ratings for national defense and energy programs, and the use of specific certification forms related to trade agreements and balance of payments. The contract imposes rigorous documentation standards, requiring invoice and receiving report alignment with the Wide Area Workflow system, and includes prohibitions and exclusions related to security compliance. All related contractual documents including orders and modifications are considered officially issued upon electronic delivery or mail deposit, and the government’s acceptance of a proposal establishes a binding bilateral agreement. The contract emphasizes complete adherence to federal procurement standards and prioritizes timely, incremental fulfillment.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details