Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Preventative Maintenance of T2100 Treadmill ST for Cardiac Stress Testing

Active

Federal

Response Deadline08/05/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires timely execution of comprehensive preventative maintenance on T2100 Treadmill ST units utilized in cardiac stress testing environments, encompassing mechanical and electrical inspections, precision calibration, safety testing, and software diagnostics to ensure operational integrity and patient safety. All work must adhere to established clinical and equipment standards to maintain the reliability of these critical medical devices used in diagnostic procedures. The contract is designated as a subcontract under NAICS code 811310 and is managed by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7, with a strict response deadline of August 5, 2026, at 4:00 PM. The scope demands specialized technical expertise and compliance with medical equipment maintenance protocols, though specific location details and point of contact information are not provided. All activities are expected to be performed with precision to support the continuous functionality of treadmills integral to cardiac stress testing workflows.

General Info

Preventive maintenance on T2100 treadmills for cardiac testing, due August 5, 2026, under VA subcontract.

Agency

Department Of Veterans Affairs → 247-NETWORK Contract Office 7 (36C247)View Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

GA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 04:00:00 PM UTCin about 12 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 247-NETWORK Contract Office 7 (36C247)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 247-NETWORK Contract Office 7 (36C247)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform mechanical and electrical inspections, calibration, safety testing, and software diagnostics on T2100 Treadmill ST units used in cardiac stress testing.

Similar Contracts

Same NAICS industry code

Warranty and Post-Delivery Support ServicesThe contract requires the provision of warranty-period repair, replacement, technical support, and field service for an electric bone drill, all in strict accordance with the manufacturer’s warranty terms. Services must be delivered promptly and effectively to ensure continued operational reliability of the device, with a focus on minimal downtime and full compliance with established technical and safety standards. All support activities, including diagnostics, parts replacement, and on-site field service, are to be performed in accordance with the manufacturer’s specifications and within the defined warranty period. This is a small business set-aside subcontract under NAICS code 811310, assigned to the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. The performance location is specified as San Diego, CA, with a zip code of 92161. The solicitation was posted on August 4, 2026, and responses are due by August 12, 2026. Only entities qualifying as small businesses under SBA guidelines are eligible to bid, and the contract is structured to prioritize local or regional service providers capable of meeting the technical and logistical demands of supporting medical equipment in a federal healthcare environment.

262-NETWORK Contract Office 22 (36C262)

POSTED

about 16 hours ago

DEADLINE

Post-Delivery Technical Support and Maintenance ServicesThe contract covers ongoing maintenance, calibration, and repair services for the Steris AMSCO 600LS sterilization unit located at the Boise VA Medical Center, ensuring continuous operational reliability of this critical healthcare equipment. Services are required to be performed in accordance with manufacturer specifications and industry standards to maintain compliance with safety and sterilization protocols essential for patient care. The work is classified under NAICS code 811310, indicating it is a technical maintenance and repair service, and is structured as a subcontract under the Department of Veterans Affairs through Rpo East. The solicitation was posted on August 4, 2026, with a response deadline of August 7, 2026, indicating a short turnaround for proposers to submit qualifications and service plans. The place of performance is tied directly to the Boise VA Medical Center, requiring on-site presence and rapid response capabilities for emergency repairs. The contract does not specify a set-aside status or point of contact, and no detailed funding or performance metrics are included in the provided data, but the nature of the equipment necessitates qualified technicians with experience in high-level medical sterilization systems.

Rpo East (36C24E)

POSTED

about 16 hours ago

DEADLINE

Post-Delivery Support and Maintenance Services

255-NETWORK Contract Office 15 (36C255)

POSTED

about 16 hours ago

DEADLINE

Repair of Kell-Strom T-400 Riveter

Solicitation # N68520-26-SIMACQ-JC00000-0250

The Navy’s Naval Air Systems Command is seeking to sole-source the repair of a legacy T-400 riveter, asset number 65923043611, to Kell-Strom Tool Co. as the only known source capable of performing the complex, iterative repair process required. This unit demands a specialized troubleshooting methodology where faults are only revealed after prior issues are resolved, necessitating repeated test-and-repair cycles that typically involve custom fabrication or replacement of nearly all internal components to restore proper clamping, alignment, and riveting capabilities. Kell-Strom’s unique access to OEM-licensed technical data, proprietary tooling, and specialized test facilities makes it the only responsible contractor capable of meeting the demanding technical and timeline requirements. The work includes initial diagnostic inspection, ongoing serial repair cycles, component fabrication or procurement, and final calibration to meet original equipment manufacturer specifications. Deliverables include a fully restored and tested riveter, a detailed repair and fabrication summary documenting all faults and replacement parts, and a certified test report verifying compliance with P&WC OEM safety, precision, and performance standards. The solicitation, issued under number N68520-26-SIMACQ-JC00000-0250 with a response deadline of August 19, 2026, will be evaluated based on technical capability, price, and past performance. The place of performance is Cherry Point, North Carolina, and the contract falls under NAICS code 811310 with no set-aside designation. Primary point of contact is Daniel Collins of the Department of Defense, based at Patuxent River, Maryland.

Naval Air Systems Command

POSTED

about 16 hours ago

DEADLINE

AIRFIELD LEAKING TRANSFORMER

Solicitation # 31125260000817

The contract requires the comprehensive removal and replacement of existing airfield lighting transformers at U.S. Coast Guard Base Cape Cod on Joint Base Cape Cod in Buzzards Bay, Massachusetts, with new units meeting precise technical specifications. The scope covers three primary transformers: two single-phase 37.5 KVA units from McGraw Edison—Transformer 413 near Building 614 and Runway 23, and Transformer 523 near Building 614 and Runway 14—and one three-phase 1500/1680 KVA unit from ABB, which was previously misidentified in the Statement of Work as Transformer 232177 but must now be replaced according to the corrected description: Transformer 138613, located adjacent to Building 3181 apron, with a 1000/1120 KVA rating, 4160GRDy/2400 high voltage, 480Y/277 low voltage, and 329 gallons of mineral oil. The contractor is responsible for verifying all existing transformer details, securing power, removing and disposing of old units at their own expense off-base, installing new transformers per manufacturer guidelines, and restoring full operational functionality with testing. Special attention is required for the ABB transformer regarding potential oil leaks, including thorough investigation and submission of replacement or repair feasibility analysis. An optional fourth transformer, a 15 KVA single-phase unit from Southeastern Transformer Co near Building 195 and Runway 5, is available for separate bid consideration. The contract imposes strict performance, safety, and compliance obligations. All work must be completed within 45 calendar days of the Notice to Proceed, with equipment delivered FOB destination. Personnel must be fully qualified, with skilled labor and on-site supervision that can read, write, and speak English, and who are authorized to approve minor changes under $2,000. Daily logs must be submitted weekly to the Contracting Officer’s Representative (COR), who also conducts inspections and final acceptance. The contractor must comply with NFPA 70, FAA regulations, OSHA standards, Joint Base Cape Cod fire and safety protocols, including mandatory hot work permits for welding or burning. Environmental and hazardous material rules apply: all displaced materials require proper documentation via bill of lading, landfill receipts, and recycler permits, and any hazardous substances used or encountered must be reported immediately to the COR with

Base Cape COD(00052)

POSTED

about 16 hours ago

DEADLINE

41--COMPRESSOR,REFRIGER, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RLC39

The contract pertains to the repair or modification of a refrigeration compressor with NSN 7H-4130-014695749, with a quantity of six units to be delivered FOB origin. The Government does not hold the data rights necessary to procure or contract for repairs from alternate sources, and it has been determined that acquiring such data or reverse engineering the part is uneconomical. Potential offerors must ensure that their product, service, or manufacturer meets all specified qualification requirements at the time of award, as mandated by FAR clause 52.209-1. Technical documentation such as Military and Federal Specifications, Qualified Products Lists, and Military Handbooks can be accessed through the DoD Single Stock Point via DAPS in Philadelphia or via the ASSIST-Online portal at http://quicksearch.dla.mil/, though drawings, patterns, and deviation lists are not available through these channels. Interested parties without internet access may contact the DODSSP Help Desk or mail requests to the DLA Document Services address. This procurement does not follow FAR Part 12 commercial item acquisition policies, but vendors may still propose commercial items within 15 days of this notice if capable of satisfying the requirement. The solicitation number is N0010426RLC39, with a response deadline of September 18, 2026, and the point of contact is Cody Smith of the Naval Supply Systems Command Weapon Systems Support, located in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Mechanical Services Trades at Various Water Pollution Control Facilities 2026

Solicitation # 38307

The solicitation for Mechanical Services Trades at Various Water Pollution Control Facilities in 2026, identified by solicitation number 38307, is issued by the Connecticut Department of Administrative Services Procurement under the SLED classification. Proposals must be submitted by the deadline of August 18, 2026, at 3:00 PM, but no electronic responses are accepted, and questions posted on the website will not be addressed. Interested parties must refer to the official RFP document for complete instructions, requirements, and submission guidelines. The work will be performed across multiple water pollution control facilities within Connecticut, with Todd Matthewson, WPC Superintendent, serving as the primary point of contact via phone or email. The solicitation is posted for informational purposes only on the CTSource portal, and all formal procedures must be followed as outlined in the official RFP materials.

DAS Procurement

POSTED

about 16 hours ago

DEADLINE

YELL PURCHASE CATERPILLAR ENGINE PARTS

Solicitation # 140P1526Q0121

Yellowstone National Park is seeking Caterpillar-branded engine parts for a snow plow under solicitation number 140P1526Q0121, with a strict requirement for genuine Caterpillar replacement components as justified in the attached documentation. This procurement is exclusively set aside for small businesses, with no participation allowed from other business categories, and is classified under NAICS code 811310. All quotes must be submitted electronically to lindsay_mclaughlin@ios.doi.gov by September 2, 2026, at 6:00 p.m. Mountain Time, following the detailed specifications and pricing schedules provided. Questions about the solicitation must be submitted electronically no later than August 17, 2026, at 12:00 p.m. Mountain Time, and any official responses will be issued as amendments to the solicitation. The contract is managed by the Department of the Interior through the Arizona office in Flagstaff, with performance expected at Yellowstone National Park, Wyoming. Point of contact for all inquiries is Lindsay McLaughlin, reachable via email or phone number provided.

Imr ARIZONA(12400)

POSTED

about 16 hours ago

DEADLINE

Semi-Annual Walk-in Cooler Service in Parlier, California

Solicitation # 1232SA26Q1145

This solicitation, numbered 1232SA26Q1145, is a combined synopsis and solicitation for commercial items issued under FAR Part 12 to procure semi-annual maintenance and repair services for 33 walk-in coolers located at the USDA-ARS San Joaquin Valley Agricultural Sciences Center in Parlier, California. The contract is a total small business set-aside under NAICS code 811310, with a size standard of $12.5 million, and is open to all responsible small business sources. The work involves comprehensive HVAC maintenance, including inspection and cleaning of evaporator and condenser coils, refrigerant pressure and performance testing, system calibration, electrical component checks, compressor and defrost mode verification, door hardware inspection, fan blade cleaning, motor lubrication, and thorough cleanup after service. All equipment, materials, and supplies must be furnished by the contractor. The period of performance is one year, running from September 1, 2026, to August 31, 2027, with two semi-annual service visits scheduled during that timeframe. The acquisition is structured as a Firm-Fixed Price Purchase Order under a Lowest Price Technically Acceptable (LPTA) evaluation method, where technical acceptability and past performance are pass/fail gates, and award will be made to the lowest priced offer that meets all technical and performance requirements. An official site visit is mandatory and scheduled for August 6, 2026, at 9:00 AM local time at 9611 S. Riverbend Ave., Parlier, CA 93648, and will be the only opportunity for offerors to inspect the location. Quotations must include a detailed operational approach addressing each SOW requirement, pricing submitted as specified, and a signed copy returned to the issuing office. Submissions are due by 5:00 PM Central Daylight Time on August 14, 2026, with all questions due no later than August 7, 2026, directed to Kerrie Hodges at kerrie.hodges@usda.gov, and must include the solicitation number in the subject line. Offerors must hold firm pricing for 90 days after the submission deadline. The contractor must comply with multiple Federal Acquisition Regulation clauses, including 52.212-4 (Terms and Conditions for Commercial Services), 52.20

USDA Ars Afm Apd

POSTED

about 16 hours ago

DEADLINE

Supply, Install, and Maintain a New Mailing Machine

Solicitation # RFQ50931

The Municipality of East Hants is seeking a vendor to supply, install, and maintain a new mailing machine to replace an aging unit that is no longer serviceable. The requirement includes not only the acquisition and installation of the equipment but also ongoing maintenance services as outlined in the Statement of Requirements, with the goal of ensuring reliable and efficient mail processing operations. Interested parties must submit competitive quotations by the deadline of August 18, 2026, using the official Nova Scotia Procurement Portal, as updates or amendments to the tender may not be reflected on CanadaBuys. The solicitation number is RFQ50931, posted on August 4, 2026, and all inquiries and submissions should be directed to the Contracting Authority, Mike Hatfield, at procurement@easthants.ca. There is no cost to access the tender documents, though third-party platform registration or fees may be required to view or respond to the request. The contract duration and specific terms are detailed in the full tender documentation, and no set-aside provisions apply.

Municipality of the District of East Hants

POSTED

about 23 hours ago

DEADLINE

Maintenance and Repairs for Cooling and Refrigeration Equipment at WMCI

Solicitation # 0032-N

Bidders must submit all questions regarding the Maintenance and Repairs for Cooling and Refrigeration Equipment at WMCI solicitation through the Public Purchase system by 2:00 p.m. Mountain Time on August 14, 2026; late questions will not be considered. All responses to the solicitation must be fully uploaded via the Public Purchase online system no later than 2:00:00 p.m. MT on August 21, 2026, and failure to complete the upload by this deadline will result in the submission being locked, deemed non-responsive, and excluded from evaluation. It is the sole responsibility of each bidder to regularly monitor the Public Purchase portal for responses to inquiries, addenda, award notices, or any other updates related to this solicitation, as the Wyoming Procurement Office will not communicate this information via email, phone, fax, or mail. All documents must be submitted in PDF, Excel, or Microsoft Office format. The solicitation is issued by the State of Wyoming through its General Services Division for services to be performed within Wyoming. Interested parties can register for free on Public Purchase using the step-by-step guide available at https://ai.wyo.gov/divisions/general-services/purchasing. Primary point of contact for inquiries is Brenda Crozier, reachable at (307) 777-6708 or brenda.crozier@wyo.gov.

State of Wyoming

POSTED

DEADLINE

Preventative Maintenance on four (4) Individual Tekmar XYZ Purge and Trap Systems for The Texas Department of State Health Services (DSHS) Laboratory

Solicitation # HHS0017742

The Texas Department of State Health Services Laboratory is seeking competitive bids through the Texas Health and Human Services Commission’s Procurement and Contracting Services division for yearly preventative maintenance services on four individual Tekmar XYZ purge and trap systems. The solicitation, identified as HHS0017742, was posted on August 3, 2026, with responses due by August 17, 2026, at 4:30 PM CT. The maintenance contract(s) will ensure the continued proper operation of these critical laboratory systems, supporting the accuracy and reliability of environmental and public health testing services. The work is to be performed in Texas, with no specific city designated, and is classified under a state and local government (SLED) procurement with no set-aside provisions specified. David Martinez of the agency serves as the primary point of contact for inquiries, reachable at 512-406-2597 or David.Martinez01@hhs.texas.gov. Bidders must submit proposals through the Texas SmartBuy portal using the provided link.

Department of State Health Services

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 247-NETWORK Contract Office 7 (36C247)

Same awarding agency

Preventative Maintenance of MAV VU360 Ventilator SystemsThe contract requires the performance of preventative maintenance on MAV VU360 portable ventilator systems, including inspections, calibration, alarm testing, and firmware updates to ensure ongoing compliance with respiratory therapy and clinical standards. All work must be executed to maintain device reliability and safety in clinical environments, adhering to established healthcare protocols. The contract is classified as a subcontract under NAICS code 334510, which pertains to medical equipment and supplies manufacturing, and is managed by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7. The opportunity was posted on August 4, 2026, with a response deadline of August 5, 2026, indicating a very short window for submission and suggesting urgency in securing qualified service providers. While no specific location is designated for performance, work is expected to support VA healthcare facilities nationwide, and the absence of a point of contact or detailed address implies the scope is broadly applicable across VA operations.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 12 hours

Preventative Maintenance of Carestation 650 Patient Monitoring SystemsThe contract requires the performance of scheduled preventative maintenance, calibration, diagnostics, software updates, and testing on Carestation 650 anesthesia and monitoring systems, ensuring full compliance with FDA regulations and manufacturer specifications. All work must be carried out to guarantee the continued operational integrity and safety of these critical medical devices used in patient care environments. The scope of services demands technical expertise in anesthesia and monitoring equipment, with strict adherence to regulatory and quality standards to maintain device accuracy and reliability. This is a subcontract under the Department of Veterans Affairs, managed by the 247-NETWORK Contract Office 7 (36C247), classified under NAICS code 334510 for medical diagnostic equipment manufacturing. The solicitation was posted on August 4, 2026, with a response deadline of August 5, 2026, indicating a highly time-sensitive procurement process. The place of performance and contact details are not specified, suggesting work may be performed across multiple VA facilities, and the successful offeror must be prepared to deploy services as needed to meet federal healthcare operational requirements.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 12 hours

Medical Imaging Software Integration and Technical SupportThe contract requires the provision of technical support, software integration, and user training services for the Image Blender system, a medical imaging tool designed to overlay x-ray and specimen images to enhance the accuracy of surgical margin assessment during breast cancer procedures. The work involves ensuring seamless integration of the software into existing clinical workflows, maintaining system functionality, and delivering comprehensive training to healthcare professionals to maximize adoption and effectiveness in real-world surgical environments. All deliverables must align with the technical specifications and performance standards necessary for safe and reliable use in a clinical setting. The contract is classified as a subcontract under NAICS code 541512, indicating it falls within the category of computer systems design services. It was posted by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7, with performance required to occur in a location identified by the ZIP code 30033. Proposals must be submitted by the deadline of August 6, 2026, at 3:00 PM, and while no set-aside provisions are specified, interested parties must prepare responses that address the full scope of technical and training requirements outlined in the solicitation.

Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

Intent to Sole Source: Mozart 3-D Specimen Tomosynthesis System

Solicitation # 36C24726Q0725

The Joseph Maxwell Cleland Atlanta VA Medical Center intends to sole source a Mozart 3-D Specimen Tomosynthesis System from KUB Technologies to enhance breast cancer surgery outcomes by enabling 3D imaging of breast specimens following lumpectomies or excisions. This system, known as the Mozart iQ, uses 3D specimen tomosynthesis—the current standard of care—to produce detailed X-ray images that accurately locate tumors and surgical clips, overcoming limitations of traditional 2D imaging where dense tissue can obscure critical details. The acquisition is necessary because the facility currently lacks this capability, and the system will improve diagnostic precision and surgical outcomes for veteran patients. The solicitation number for this intent to sole source is 36C24726Q0725, posted on August 4, 2026, with responses due by August 6, 2026. The procurement falls under NAICS code 334517 for medical equipment manufacturing and is managed by the 247-NETWORK Contract Office 7 under the Department of Veterans Affairs, located in Augusta, Georgia. The place of performance is the Atlanta VA Medical Center in Atlanta, Georgia, with Monica A. Reed as the primary point of contact. No set-aside provisions apply, and the intent is to proceed with a single vendor due to the unique and proprietary nature of the Mozart iQ system, which is essential for maintaining clinical standards in breast cancer care.

Irradiation Apparatus Manufacturing

POSTED

about 16 hours ago

DEADLINE

J065--GE Tech Support and Service

Solicitation # 36C24726Q0794

The Department of Veterans Affairs, Network Contracting Office 7, intends to award a sole-source, firm fixed-price contract to Datex-Ohmeda, Inc dba GE Healthcare for preventative maintenance services on the Carestation 650, MAV VU360, and T2100 Treadmill ST equipment at the Atlanta VA Medical Center in Decatur, Georgia. The contract will be awarded under FAR 6.103-1 due to a determination that only one source is reasonably available, supported by a documented justification, and will be issued under NAICS code 339112. The agreement will consist of a base year with up to four additional one-year option periods, allowing for a potential five-year performance period. This notice is not a solicitation and does not invite competitive proposals; it serves only as an announcement of the government’s intent to award without competition. Any person or entity wishing to challenge the sole-source determination must submit clear and convincing evidence that competition would benefit the government, and all responses must be received via email to Quentin.Deloney2@va.gov no later than 12:00 pm EST on Wednesday, August 5, 2026. No telephone inquiries or emails with questions will be accepted, and no solicitation package is available. The contracting office is located in Augusta, Georgia, and the primary point of contact for submissions is Contract Specialist Quentin Deloney.

Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 12 hours

Guldmann Ceiling Lift PM Services

Solicitation # 36C24726Q0795

This contract is a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside solicitation for preventive and unscheduled maintenance services on 69 Guldmann ceiling lift systems located at the Trinka Davis Veterans Village in Carrollton, Georgia, and the Cobb County VA Clinic in Marietta, Georgia, under the Atlanta VA Healthcare System. The solicitation, numbered 36C24726Q0795, is issued by the Department of Veterans Affairs VISN 7 Network Contracting Activity in Augusta, Georgia, with a response deadline of August 6, 2026, at 10:00 EDT. Only SDVOSBs certified in the SBA database and identified by Guldmann are eligible to respond, and offerors must be current in SAM registration with a valid Unique Entity Identifier and EFT information. The contractor must be a certified SDVOSB meeting all requirements under 13 CFR 121, 125, 128, and VAAR subpart 819.70, and must comply with the 50% limitations on subcontracting, meaning no more than half of the contract value may be paid to non-SDVOSB subcontractors. Performance begins September 1, 2026, for a base year with four optional one-year extensions through August 31, 2031. Services must be performed exclusively by manufacturer-trained engineers, including preventive maintenance such as cleaning, lubrication, inspection, and testing at maximum weight capacity, in accordance with ISO 10535:2021 Annex B and VA-specific checklists. Unscheduled repairs and detailed field service reports documenting “as found,” “calibrated to,” and “adjusted to” values are required, and all work must conform to VA standards for equipment performance. Payment is performance-based, submitted electronically via VA’s FSC portal in arrears, and processed via electronic funds transfer. The solicitation requires full completion of SF1449, adherence to 52.212-4 (with deviation), and inclusion of attached clauses including 52.212-3 and 52.212-5. Offers will be evaluated on technical acceptability and cost, with award going to the most advantageous offer without discussions unless necessary. Contractors are prohibited from engaging in racially discriminatory DEI activities, must abide by security prohibitions on unmanned aircraft systems from

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

W074--Xerox Short Term Printer Rental (VA-27-00003518)

Solicitation # 36C24726Q0801

The Department of Veterans Affairs, Network Contracting Office 07, intends to award a sole source delivery order to Xerox Corporation for the rental of Xerox Iridesse 120 PPM Production Press Color Printers and associated finishing equipment under FAR Part 8.405-6(a)(1)(B), citing only one available source. The equipment is essential to the daily operations of the Central Alabama Veterans Health Care System’s Patient Reminder Notification Regional Print Center located in Tuskegee, Alabama, which currently relies on two proprietary Xerox Iridesse presses and three Info Seal finishing devices that are uniquely integrated with the Xerox/VA Patient Reminder Notification solution. Xerox is the sole manufacturer of the Iridesse press, with no authorized resellers, and its exclusive technologies make it irreplaceable for maintaining the integrity and functionality of the existing print and mail infrastructure. The contract is classified under NAICS code 532420 for Office Machinery and Equipment Rental and Leasing, with a Federal Supply Class of W074, and the Small Business Administration size standard is set at 1,500 employees or $40 million in annual revenue. This notice is not a solicitation and does not invite competitive proposals; any response must provide clear, compelling, and convincing evidence that competition would be advantageous to justify a shift from sole sourcing. All inquiries must be submitted in writing via email to Earnest Ellison, Contracting Officer, with the subject line referencing solicitation number 36C24726Q0801 and Xerox Rental. Responses are due by August 14, 2026, and the Government retains sole discretion to determine whether to proceed with a non-competitive award.

Office Machinery and Equipment Rental and Leasing

POSTED

about 16 hours ago

DEADLINE

Software Maintenance & Patch ManagementThe contract calls for ongoing software maintenance services for the DSS Vista suite, focusing on critical operational support such as bug fixes, security patches, version updates, and performance optimization to ensure system reliability and compliance. The work is scope-bound to sustaining the suite’s functionality and integrity over time, with an emphasis on proactive maintenance to mitigate risks and enhance user experience. This subcontract is issued under the NAICS code 541511 for Custom Computer Programming Services and is managed by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7. The solicitation was posted on August 1, 2026, and while specific performance location details are not provided, the work is expected to support federal systems under VA oversight without a designated set-aside type. All activities must align with federal standards for cybersecurity and software lifecycle management to maintain mission-critical operations.

Custom Computer Programming Services

POSTED

DEADLINE

Cloud Infrastructure & System Hosting ManagementThe contract encompasses the secure cloud hosting and comprehensive management of the DSS Vista suite on platforms approved by the Department of Veterans Affairs, requiring full lifecycle support including server provisioning, system patching, continuous monitoring, automated backups, and robust disaster recovery protocols. All services must be delivered in alignment with VA security standards and regulatory requirements to ensure the integrity, availability, and confidentiality of sensitive veteran health data. The work is classified as a subcontract under NAICS code 518210, managed by the 247-NETWORK Contract Office 7 within the Department of Veterans Affairs, with performance expected to occur on VA-approved cloud infrastructure. The solicitation was posted on August 1, 2026, and no set-aside designation or point of contact details are provided. The successful contractor must maintain strict compliance with federal cybersecurity frameworks and ensure seamless operational continuity for critical healthcare systems.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

IT Help Desk and Tier 2 Technical SupportThe contract seeks a subcontractor to provide Tier 2 technical support for DSS Vista users, focusing on troubleshooting complex system issues, resolving service tickets, delivering user training, and managing escalations through federal service desk platforms. This role requires deep familiarity with the DSS Vista environment and the ability to handle technical inquiries beyond basic help desk functions, ensuring seamless operations for Department of Veterans Affairs personnel. The support must align with federal standards and utilize approved tools to maintain service quality and compliance. This subcontract is issued under the 247-NETWORK Contract Office 7 (36C247) and falls under the NAICS code 541512 for computer systems design services. It was posted on August 1, 2026, and the place of performance and agency office location are not specified, suggesting the work may be performed remotely or across multiple VA facilities. The subcontractor is expected to deliver responsive, reliable, and secure technical assistance to end users without direct oversight from the contracting office, and all services must adhere to the federal government’s IT support protocols and datahandling requirements.

Computer Systems Design Services

POSTED

DEADLINE

Health IT System Integration & Interoperability SupportThe contract involves the integration of the DSS Vista suite with the Department of Veterans Affairs EHR systems, including VistA and Cerner, with a focus on achieving seamless data interoperability through the development of custom APIs and configuration of HL7 and FHIR interfaces. The work requires rigorous system testing to ensure accurate, secure, and real-time exchange of clinical and administrative data across platforms, supporting improved healthcare delivery for veterans. The effort is structured as a subcontract under the 247-NETWORK Contract Office 7, classified under NAICS code 541511 for custom computer programming services, and is positioned to enhance the VA’s digital health infrastructure through technical alignment with federal interoperability standards. The contract was posted on August 1, 2026, and performance is expected to occur within the VA’s existing operational environment without specified geographic constraints.

Custom Computer Programming Services

POSTED

DEADLINE

Specialized Equipment Rental or SupportThe contract seeks specialized equipment rental or support services for the cleaning and restoration of air handling unit coils, requiring high-pressure washers, chemical injection systems, or containment units to effectively perform the work. This is a subcontract opportunity set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under the SDVOSB program, ensuring eligibility is restricted to businesses owned and controlled by veterans with a service-connected disability. The North American Industry Classification System code 532412 applies, indicating the focus on commercial and industrial machinery and equipment rental. The solicitation was posted on July 31, 2026, with responses due by August 7, 2026, at 5:00 AM Eastern Time. The contracting office is the 247-NETWORK Contract Office 7 under the Department of Veterans Affairs, though the precise place of performance and point of contact details are not specified. Interested vendors must ensure compliance with SDVOSB certification requirements and have the technical capability to deliver the required equipment and operational support in accordance with the scope of work.

Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing

POSTED

DEADLINE