Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Crane Maintenance and Technical Compliance Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive maintenance and technical compliance services for a 50-ton crane in accordance with Technical Order 00-80C-1, encompassing all necessary preventive maintenance tasks, routine inspections, and adherence to strict regulatory standards. All activities must be thoroughly documented and reported in compliance with DFARS Appendix F, ensuring full accountability and traceability of maintenance history and operational readiness. The work is scoped to maintain the crane in optimal working condition and meet Department of Defense mandates for equipment reliability and safety. This subcontract is set aside exclusively for small businesses under the SBA’s Total Small Business Set Aside program, with a NAICS code of 811310 indicating industrial machinery and equipment repair. The place of performance is located at a facility with ZIP code 76311, and the contract opportunity is managed by the Department of Defense under the agency designation FA3020 82 Cons Lgc. Interested parties must submit proposals by the deadline of August 10, 2026, at 7:00 PM ET, and the solicitation was posted on August 4, 2026, through the SAM.gov platform.

General Info

Small business set-aside for 50-ton crane maintenance per DoD standards at ZIP 76311, due August 10, 2026.

Agency

Department Of Defense → FA3020 82 Cons LgcView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

0, TX, 76311, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA3020 82 Cons Lgc
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → FA3020 82 Cons Lgc
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Maintain 50-ton crane compliance with Technical Order 00-80C-1, including preventive maintenance, inspections, and DFARS Appendix F reporting.

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
SLED
Equipment Upkeep, Repair & Replacement at Corpus Christi State Supported Living Center (CCSSLC)
Solicitation # HHS0017404V2
The Texas Health and Human Services Commission is seeking competitive bids to establish a contract for equipment upkeep, repair, and replacement at the Corpus Christi State Supported Living Center, identified by solicitation number HHS0017404V2. The contract aims to ensure continued operational integrity of facility equipment through routine maintenance, timely repairs, and necessary replacements, with an anticipated start date of September 1, 2026. Bidders must submit responses by August 25, 2026, at 10:30 a.m. Central Time, and all communications and official updates will be posted via the Texas SmartBuy portal. An optional on-site visit is scheduled for August 7, 2026, at 10:30 a.m. at 902 Airport Rd, Corpus Christi, TX 78405, where bidders can review requirements and tour the facility, though attendance is not mandatory and will not affect bid eligibility. Bidders must notify Richard Castaneda or Debbie Salinas if planning to attend the visit. All questions and clarifications must be submitted by August 12, 2026, at 5:00 p.m. Central Time, with official responses provided via addendum posted on the Electronic State Business Daily no later than August 17, 2026. The solicitation is managed by the Health and Human Services Commission, with Isaiah Wilczynski listed as the primary point of contact for procurement inquiries. The contract type is a standard solicitation without a specific set-aside designation, and performance will occur exclusively at the Corpus Christi facility in Texas. Bidders are expected to understand the scope of work through the issued documentation, with the expectation that all services will support the long-term functionality and safety of equipment critical to resident care and facility operations.
Health and Human Services Commission

POSTED

about 14 hours ago

DEADLINE

in 20 days
View Details
NAICS: 811310
New
Federal
Elevator Maintenance & Accessibility CertificationThe contract requires the maintenance and certification of at least two accessible elevators in compliance with the Americans with Disabilities Act and ASME A17.1 safety standards, ensuring continuous operational availability and accessibility for all individuals. This subcontract, issued by the General Services Administration’s PBS Office of Leasing, targets service providers capable of sustaining elevator systems in Detroit under strict regulatory and safety benchmarks. Performance is expected to meet federal accessibility requirements without interruption, with all work centered around maintaining functionality, reliability, and ADA conformity. The solicitation was posted on August 4, 2026, with responses due by September 2, 2026, indicating a timeline for qualification and selection. The NAICS code 811310 identifies the work as building equipment contractors specializing in elevator services. No set-aside classification is specified, meaning all eligible entities may compete. The place of performance is definitively tied to Detroit, and interested parties must ensure their capabilities align with local and federal mandates, including documented compliance and proof of ongoing maintenance protocols to support uninterrupted accessibility.
Pbs Office Of Leasing

POSTED

about 22 hours ago

DEADLINE

in 28 days
View Details
NAICS: 811310
New
Federal
Warranty and Post-Delivery Support ServicesThe contract requires the provision of warranty-period repair, replacement, technical support, and field service for an electric bone drill, all in strict accordance with the manufacturer’s warranty terms. Services must be delivered promptly and effectively to ensure continued operational reliability of the device, with a focus on minimal downtime and full compliance with established technical and safety standards. All support activities, including diagnostics, parts replacement, and on-site field service, are to be performed in accordance with the manufacturer’s specifications and within the defined warranty period. This is a small business set-aside subcontract under NAICS code 811310, assigned to the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. The performance location is specified as San Diego, CA, with a zip code of 92161. The solicitation was posted on August 4, 2026, and responses are due by August 12, 2026. Only entities qualifying as small businesses under SBA guidelines are eligible to bid, and the contract is structured to prioritize local or regional service providers capable of meeting the technical and logistical demands of supporting medical equipment in a federal healthcare environment.
262-NETWORK Contract Office 22 (36C262)

POSTED

about 22 hours ago

DEADLINE

in 8 days
View Details
NAICS: 811310
New
Federal
Preventative Maintenance of T2100 Treadmill ST for Cardiac Stress TestingThe contract requires timely execution of comprehensive preventative maintenance on T2100 Treadmill ST units utilized in cardiac stress testing environments, encompassing mechanical and electrical inspections, precision calibration, safety testing, and software diagnostics to ensure operational integrity and patient safety. All work must adhere to established clinical and equipment standards to maintain the reliability of these critical medical devices used in diagnostic procedures. The contract is designated as a subcontract under NAICS code 811310 and is managed by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7, with a strict response deadline of August 5, 2026, at 4:00 PM. The scope demands specialized technical expertise and compliance with medical equipment maintenance protocols, though specific location details and point of contact information are not provided. All activities are expected to be performed with precision to support the continuous functionality of treadmills integral to cardiac stress testing workflows.
247-NETWORK Contract Office 7 (36C247)

POSTED

about 22 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 811310
New
Federal
Info Seal Folder/Slitter Sealer Finishing Device MaintenanceThe contract pertains to the maintenance, calibration, and repair of three Info Seal Folder/Slitter Sealer Finishing devices that operate in conjunction with Xerox Iridesse Presses, ensuring continued operational efficiency and precision in high-end printing workflows. Services encompass both mechanical servicing to address wear and performance issues, as well as software integration to maintain seamless communication between the finishing equipment and the press systems. This work is critical to sustaining the functionality of specialized printing infrastructure that supports high-volume, high-quality output requirements. The solicitation is classified as a subcontract under NAICS code 811310, which pertains to industrial and commercial machinery and equipment repair and maintenance. It is managed by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7, with a response deadline of August 14, 2026, and was posted on August 4, 2026. No specific place of performance or point of contact is listed, and the contract does not indicate a set-aside type. All work is expected to be performed in alignment with the operational needs of the equipment, with an emphasis on minimal downtime and optimal system integration.
247-NETWORK Contract Office 7 (36C247)

POSTED

about 22 hours ago

DEADLINE

in 9 days
View Details
NAICS: 811310
New
Federal
Post-Delivery Technical Support and Maintenance ServicesThe contract covers ongoing maintenance, calibration, and repair services for the Steris AMSCO 600LS sterilization unit located at the Boise VA Medical Center, ensuring continuous operational reliability of this critical healthcare equipment. Services are required to be performed in accordance with manufacturer specifications and industry standards to maintain compliance with safety and sterilization protocols essential for patient care. The work is classified under NAICS code 811310, indicating it is a technical maintenance and repair service, and is structured as a subcontract under the Department of Veterans Affairs through Rpo East. The solicitation was posted on August 4, 2026, with a response deadline of August 7, 2026, indicating a short turnaround for proposers to submit qualifications and service plans. The place of performance is tied directly to the Boise VA Medical Center, requiring on-site presence and rapid response capabilities for emergency repairs. The contract does not specify a set-aside status or point of contact, and no detailed funding or performance metrics are included in the provided data, but the nature of the equipment necessitates qualified technicians with experience in high-level medical sterilization systems.
Rpo East (36C24E)

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 811310
New
Federal
Post-Delivery Support and Maintenance Services
255-NETWORK Contract Office 15 (36C255)

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details
NAICS: 811310
New
Federal
Notice of Intent to Sole Source: Transition to Wired RaycoWylie LMI Configuration - Craft Portal Cranes
Solicitation # LMI_Sources_Sought
The U.S. Navy, through NAVFACSYSCOM Atlantic, has issued a notice of intent to sole source the transition to the Wired RaycoWylie LMI configuration for Craft Portal Cranes, with the solicitation number LMI_Sources_Sought. This action is aimed at securing specialized equipment modifications and integration services that require exclusive technical expertise, with no competitive bids anticipated under current conditions. The opportunity is open for responses until August 11, 2026, at 8:00 PM Eastern Time, with interested parties encouraged to submit feedback prior to the deadline to ensure all relevant capabilities are considered for this non-competitive procurement. The work will be performed at a location in Virginia, specifically designated by the address 64304, while the office overseeing the procurement is located in Norfolk, Virginia, within the Department of Defense. Lisa Sumpter serves as the primary point of contact for this solicitation and can be reached via email at lisa.a.sumpter.civ@us.navy.mil. The contract will be managed under the agency's authority, and the place of performance is situated in Virginia within the same jurisdiction as the procuring office. As no NAICS code or set-aside classification has been provided, the procurement is being treated as a standard government acquisition under the Office’s direct control, with no indication of small business or other socioeconomic preferences. All information and correspondence must be directed to the designated point of contact, and further details can be accessed through the provided SAM.gov link.
Navfacsyscom Atlantic

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 811310
New
Federal
Autonomous Mower Maintenance Service
Solicitation # FA4690SS01
The U.S. Department of Defense, through the 28th Contracting Squadron at Ellsworth Air Force Base in South Dakota, is seeking information on capable providers to perform maintenance services for Renubot Autonomous Mowers in accordance with the attached Performance Work Statement. This request targets vendors who can deliver compatible maintenance solutions aligned with Renubot software systems and is issued as a Small Business Set Aside, meaning only small businesses are eligible to respond. The solicitation, identified as FA4690SS01, is strictly for market research and does not constitute a request for proposals or an invitation to submit offers. Interested parties must submit responses by August 7, 2026, to indicate their ability to meet the specified service requirements. All work is to be performed at Ellsworth AFB with a ZIP code of 57706, and inquiries should be directed to Aaron Fox-Snider or Martelangelo Surop through the provided contact details.
FA4690 28 Cons Pkc

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 811310
New
Federal
Repair of Kell-Strom T-400 Riveter
Solicitation # N68520-26-SIMACQ-JC00000-0250
The Navy’s Naval Air Systems Command is seeking to sole-source the repair of a legacy T-400 riveter, asset number 65923043611, to Kell-Strom Tool Co. as the only known source capable of performing the complex, iterative repair process required. This unit demands a specialized troubleshooting methodology where faults are only revealed after prior issues are resolved, necessitating repeated test-and-repair cycles that typically involve custom fabrication or replacement of nearly all internal components to restore proper clamping, alignment, and riveting capabilities. Kell-Strom’s unique access to OEM-licensed technical data, proprietary tooling, and specialized test facilities makes it the only responsible contractor capable of meeting the demanding technical and timeline requirements. The work includes initial diagnostic inspection, ongoing serial repair cycles, component fabrication or procurement, and final calibration to meet original equipment manufacturer specifications. Deliverables include a fully restored and tested riveter, a detailed repair and fabrication summary documenting all faults and replacement parts, and a certified test report verifying compliance with P&WC OEM safety, precision, and performance standards. The solicitation, issued under number N68520-26-SIMACQ-JC00000-0250 with a response deadline of August 19, 2026, will be evaluated based on technical capability, price, and past performance. The place of performance is Cherry Point, North Carolina, and the contract falls under NAICS code 811310 with no set-aside designation. Primary point of contact is Daniel Collins of the Department of Defense, based at Patuxent River, Maryland.
Naval Air Systems Command

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 811310
New
Federal
Airfield Vehicle Gates Maintenance and Repair Services
Solicitation # FA480026Q0087
The contract solicitation FA480026Q0087 is a Small Business Set Aside under NAICS code 811310 for comprehensive airfield vehicle gates maintenance and repair services at Joint Base Langley-Eustis and Langley Air Force Base in Virginia. The contractor is responsible for supplying all labor, tools, equipment, supplies, and management necessary to perform preventative maintenance, emergency repairs, and initial comprehensive repairs on eight designated slide gates, ensuring 100% operational readiness at all times. Services are to be performed three times annually during the base year and four times annually during each option year, with 24/7 emergency response capability. The contract is firm fixed price and includes multiple option years extending through August 2031, with deliveries and performance centered at Langley Air Force Base. The Performance Work Statement, Wage Determination, and detailed Quality Control Plan requirements are integral to execution, and all work must comply with strict government specifications requiring zero-error reporting and full compliance with the PWS. Proposals must be submitted in three structured volumes—Price, Technical, and Past Performance—with strict page limits of 18, 30, and 8 pages respectively, formatted in Times New Roman 12-point font, single-spaced, with one-inch margins. Technical acceptability hinges on three sub-factors: personnel holding a Certified Gate Automation Technician credential, demonstrated capability to perform all PWS requirements, submission of a draft Quality Control Plan, and a 60-day plan for initial repairs. Past performance is evaluated as acceptable or unacceptable, with an unacceptable rating disqualifying the offeror. Price is evaluated for completeness, realism, and reasonableness, and the award will be made through a trade-off process that considers all three factors equally, not as a lowest price technically acceptable procurement. Contractors must comply with stringent security and personnel requirements, including Tier 1 background investigations, CAC issuance protocols, and adherence to DoD and Air Force security standards. Key personnel must be identified in writing, carry visible ID badges, and maintain contractor-marked communications. Access to the installation is tightly controlled, with all personnel requiring formal requests, identification badges, and vehicle passes, which must be returned upon departure or contract termination. Invoicing is exclusively through WAWF, and compliance with numerous FAR and DFARS clauses—ranging from whistleblower protections and cybersecurity requirements to prohibitions on hexavalent chromium and procurement from restricted regions—is mandatory. All submissions must be sent electronically to the
FA4800 633 Cons Pkp

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811310
New
Federal
Vertical Reciprocating Conveyor (VRC) Repair
Solicitation # N32253-26-Q-0070
The Pearl Harbor Naval Shipyard & IMF is initiating a sole-source, firm-fixed-price contract under the Revolutionary FAR Overhaul to secure commercial structural repairs and hardware replacement for a Vertical Reciprocating Conveyor located on its Dry Dock. The procurement is restricted to Ducworks Inc., the original equipment manufacturer, as the Naval Sea Systems Command has confirmed that only Ducworks possesses the proprietary engineering data and specialized drawings necessary to perform the work, and no third parties are authorized or licensed to access this information. This action is justified under RFO 12.201-1 and publicized in compliance with RFO 12.202(a) and RFO 5.101(a), ensuring adherence to simplified procedures for commercial services. The contract will be issued under solicitation number N32253-26-Q-0070 with a response deadline of August 6, 2026, at 12:30 AM HST. While the intent is to award without competition, any responsible source may submit a capability statement or proposal prior to the deadline to demonstrate technical capability and access to the required proprietary information. All submissions must be sent electronically to Colby Teruya and Lyndon Paloma at the designated Navy email addresses. The Government retains full discretion to determine whether competition is warranted based on responses received.
Pearl Harbor Naval Shipyard IMF

POSTED

about 22 hours ago

DEADLINE

in about 14 hours
View Details

More opportunities from Department Of Defense → FA3020 82 Cons Lgc

Same awarding agency

NAICS: 238990
New
Federal
On-Demand Aircraft Lifting Support ServicesThe contract requires the provision of on-demand aircraft lifting support services to support the RHE CDDAR training course at Sheppard Air Force Base, with a specific mandate to perform exactly 29 annual aircraft lifts. These lifts are scheduled to occur on the fifth day of each seven-day training cycle and must be coordinated directly through military instructors assigned to the course. The work is classified as a small business set aside under the SBA program, with the NAICS code 238990 indicating it falls under other professional, scientific, and technical services, and the place of performance is clearly identified as Sheppard AFB with a zip code of 76311. The solicitation was posted on August 4, 2026, with responses due by August 10, 2026, and the contract type is designated as a subcontract under the Department of Defense's FA3020 82 Cons Lgc organization.
All Other Specialty Trade Contractors

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 238990
New
Federal
50-Ton Mobile Crane Rental with Certified OperatorA 50-ton mobile crane and a certified operator are required to perform specialized lifting operations at Sheppard Air Force Base, specifically for handling KC-135 nose sections and F-15 airframes. The lifts must reach a minimum height of 50 feet with adequate boom clearance to ensure safe and precise positioning of heavy airframe components. This subcontract is designated as a Small Business Set Aside under NAICS code 238990, meaning only qualified small businesses are eligible to respond. The solicitation was posted on August 4, 2026, with a strict response deadline of August 10, 2026, at 7:00 PM. All work must be performed at the designated location with ZIP code 76311, under the oversight of the Department of Defense, specifically the FA3020 82 Cons Lgc office.
All Other Specialty Trade Contractors

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339950
New
Federal
80 FTW ENJJPT Patches - Amendment 2
Solicitation # FA302026Q0063-01
The solicitation FA302026Q0063-01, issued by the 82d Contracting Squadron at Sheppard AFB, Texas, seeks a Firm Fixed Price contract for the manufacture, delivery, and installation of two distinct ENJJPT patches under a 100% small business set-aside, with the NAICS code 333950 and a 500-employee size standard. The contract requires one 67-inch H no-color aluminum ENJJPT patch to be manufactured, delivered, and professionally installed on the exterior facade of Building 2320, while a separate 36-inch H x 45-inch L color ENJJPT + 80 FTW patch is to be manufactured and delivered only—excluding installation—to Building 2322, with the requirement that it include integrated hooks or mounting hardware for secure indoor wall placement. These split requirements were established through Amendment 2 dated 30 July 2026, which updated the Statement of Work and technical specifications in Attachments 1, 2, and 3 to reflect the removal of installation obligations for the interior patch and restoration of installation for the exterior patch. The deadline for submitting questions was extended to 3 August 2026 at 2:00 PM CDT, with all offers due by 12 August 2026 at 2:00 PM CDT, and responses must be submitted via email to the designated primary and alternate contacts. The contract is governed by the Federal Acquisition Regulation, including clauses related to cybersecurity, supply chain integrity, whistleblower protections, environmental compliance, and electronic invoicing via WAWF, while adherence to DFARS provisions such as the prohibition of covered telecommunications equipment and hexavalent chromium is required. The Government reserves the right to cancel the solicitation without reimbursement, and all deliveries and installations must occur at Sheppard AFB, Texas, with acceptance performed by government representatives at designated DoDAAC locations. Offerors must be registered in SAM.gov, hold current UEI and CAGE codes, and comply with all representation and certification requirements tied to socioeconomic status and defense-related security controls, with no additional evaluation factors or pricing details provided within the solicitation documentation.
Sign Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 238990
New
Federal
CDDAR Crane Rental FY27
Solicitation # FA302026Q0064
This solicitation seeks commercial crane rental services under a Firm Fixed Price contract for operations at Sheppard AFB, Texas, issued as a combined synopsis and request for quotes under FAR Part 12. The requirement is solely set aside for small businesses as defined by the NAICS code 238990, with a size standard of $19 million in annual revenue. Funds are not currently available, and no award will be made until federal funding is appropriated; the government reserves the right to cancel the solicitation at any time without obligation to reimburse offerors for incurred costs. All responses must be submitted electronically by 2:00 PM CST on August 13, 2026, and questions must be submitted in writing no later than 2:00 PM CST on August 10, 2026, to the designated primary and alternate contacts. The solicitation is solely accessible through the posted notice, and offerors are strongly advised to monitor for amendments, with documents requiring an Adobe PDF reader if they fail to open in a browser. The place of performance is identified as Sheppard AFB, Texas, and all submissions must be directed to the provided email addresses.
All Other Specialty Trade Contractors

POSTED

about 22 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332322
New
Federal
Manufacture and Delivery of 42-inch B-52 Nose Art PatchA 42-inch indoor aluminum patch depicting B-52 nose art is to be fabricated with integrated mounting hardware designed for secure wall installation in Building 2322 at Sheppard Air Force Base. The item must meet precise specifications for dimensional accuracy, material composition, and durability suitable for indoor display, with all mounting components permanently affixed to ensure safe and stable placement without additional fixtures. The contract is issued as a subcontract under a Small Business Set Aside, targeting qualified small businesses, and is classified under NAICS code 332322 for fabricated metal product manufacturing. The solicitation was posted on July 30, 2026, with responses due by August 12, 2026, and performance is to be delivered to a facility located in the 76311 zip code area under the oversight of the Department of Defense’s FA3020 82 Cons Lgc office.
Sheet Metal Work Manufacturing

POSTED

6 days ago

DEADLINE

in 7 days
View Details
NAICS: 238990
New
Federal
Professional Installation of Exterior Patch on Building 2320The contract pertains to the professional installation of a 67-inch aluminum ENJJPT patch on the exterior surface of Building 2320, requiring full compliance with base safety protocols throughout all phases of the project. Scope of work includes comprehensive site preparation, establishment of safe access methods, secure mounting of the patch, and adherence to all applicable safety standards to ensure structural integrity and operational compliance. The work must be executed withprecision to meet aesthetic and regulatory expectations, with emphasis on durability and long-term performance under environmental conditions. This is a Small Business Set Aside contract under the NAICS code 238990, designated for small business participation and issued by the Department of Defense through the FA3020 82 Cons Lgc office. The opportunity was posted on July 30, 2026, and responses are due by August 12, 2026. Performance is required at a location identified by zip code 76311, and the contract type is structured as a subcontract. No point of contact information is provided, and bidders must refer to the official UI link for additional directives or submission requirements.
All Other Specialty Trade Contractors

POSTED

6 days ago

DEADLINE

in 7 days
View Details
NAICS: 332322
New
Federal
Manufacture and Delivery of 67-inch H No-Color ENJJPT Aluminum PatchA 67-inch aluminum heritage patch for the ENJJPT program must be fabricated to exact military specifications, covering material composition, dimensional accuracy, and mounting attributes to ensure compatibility with official requirements. The patch is to be delivered to Sheppard Air Force Base, with zip code 76311, and must meet all technical standards for durability, finish, and installation. This effort is classified as a subcontract under a Small Business Set Aside, indicating that only small businesses are eligible to bid, and the NAICS code 332322 confirms it falls under the fabricated metal product manufacturing category. The opportunity was posted on July 30, 2026, with a response deadline of August 12, 2026, and is managed by the Department of Defense under the FA3020 82 Cons Lgc office. All submissions must comply with federal procurement guidelines and be received no later than the specified deadline to be considered.
Sheet Metal Work Manufacturing

POSTED

6 days ago

DEADLINE

in 7 days
View Details
NAICS: 323111
Federal
IUID-Compliant Label & Material SupplyThe contract involves the supply of durable, machine-readable 2D Data Matrix labels and marking materials that comply with MIL-STD-130 requirements and meet strict environmental durability standards. These labels are intended to support unique identification and tracking in accordance with Department of Defense specifications. The work is classified as a subcontract under a Total Small Business Set-Aside (FAR 19.5), ensuring that only small businesses are eligible to compete for this opportunity. The contract is associated with NAICS code 323111, which pertains to commercial printing activities, and is managed by the FA3020 82 Cons Lgc office within the Department of Defense. The place of performance is listed as DWG, with a zip code of 76311. The solicitation was posted on March 27, 2026, and the acquisition is aimed at enhancing logistical and inventory control through reliable and standardized labeling solutions.
Commercial Printing (except Screen and Books)

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 561910
Federal
Shipment & Container Labeling (MIL-STD-129 Compliance)This contract involves the labeling of military shipments, containers, and packages in strict accordance with MIL-STD-129 standards. The work includes the application of 2D Data Matrix codes, National Stock Numbers (NSN), Commercial and Government Entity (CAGE) codes, and essential handling instructions to ensure proper identification and handling of shipments. The contract is a subcontract set aside exclusively for small businesses under the Small Business Administration guidelines (FAR 19.5). The Department of Defense, specifically the 82nd Contract Logistics unit (FA3020), oversees this effort, with performance located in the DWG area under the postal code 76311. The NAICS code associated with this contract is 561910, which designates support services related to this kind of logistical task. The contract was posted in late March 2026 and ensures compliance with all applicable military and government marking standards to facilitate accurate shipment management and tracking.
Packaging and Labeling Services

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 541512
Federal
IUID Data Submission & Registry ReportingThis subcontract involves the submission of unique item identifier (IUID) data to the Department of Defense IUID Registry, either through the Wide Area Workflow (WAWF) system or by direct upload. The contractor is responsible for ensuring that the data is properly formatted, validated, and effectively integrated with existing logistics systems to maintain accuracy and compliance. The contract is a Total Small Business Set-Aside under FAR 19.5, classified under NAICS code 541512, which pertains to computer systems design services. The work is commissioned by the Department of Defense, specifically through the FA3020 82 Cons Lgc agency, with the place of performance identified as DWG, ZIP code 76311. Although the solicitation number and specific point of contact are not provided, the contract's focus is on supporting DoD logistics and data management efforts by facilitating efficient and validated IUID data submission and registry reporting.
Computer Systems Design Services

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332999
Federal
IUID Data Matrix Labeling & Marking ServicesThis contract involves providing permanent, machine-readable 2D Data Matrix labels for military equipment in compliance with the MIL-STD-130 standard. The services include serialization, direct part marking, and symbol verification to ensure accurate and reliable identification of parts. The work supports asset tracking and inventory management in military logistics, requiring precision and adherence to defense labeling standards. The contract is a subcontract designated as a Total Small Business Set-Aside under FAR 19.5, targeting small businesses capable of meeting the Department of Defense’s requirements. It falls under NAICS code 332999 and is managed by the FA3020 82 Cons Lgc office within the Department of Defense. The place of performance is listed as DWG, with the ZIP code 76311, indicating the location where the labeling services will be performed. This contract emphasizes compliance with military specifications and the secure, permanent marking of defense equipment.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 423430
Federal
Supply of 16-Port POE SwitchThe contract involves the supply of a commercial off-the-shelf (COTS) 16-port Power over Ethernet (POE) switch that is fully compatible with the Avigilon CCTV system. The equipment must adhere to stringent Department of Defense (DoD) cybersecurity standards as well as supply chain regulations, ensuring secure and reliable integration within defense infrastructure. This procurement is structured as a subcontract and is designated as a Total Small Business Set-Aside under FAR 19.5, emphasizing support for small business participation. The contract is identified under NAICS code 423430 and is managed by the Department of Defense through the FA3020 82nd Contract Logistics Group. The place of performance is specified as DWG with a postal code of 76311. Although some logistical details such as city and state are partially unspecified, the agreement highlights compliance with federal acquisition requirements and the importance of cybersecurity in the delivered product. The contract was posted on March 5, 2026, and is accessible via the federal contracting portal, supporting transparency and outreach to eligible small business suppliers.
Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

5 months ago

DEADLINE

N/A
View Details