Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

16--GEARBOX ASSY,INTERM

Awarded

SPRPA126RVA92Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of a gearbox assembly, identified by the title "16--GEARBOX ASSY,INTERM," under solicitation number SPRPA126RVA92. It was awarded on May 5, 2026, and is managed by the Department of Defense through the Pa DLA Aviation office in Philadelphia, Pennsylvania. The North American Industry Classification System code 333612 indicates it falls under the manufacturing of other commercial and service industry machinery. There is no set-aside designation specified, meaning the opportunity is open to all eligible vendors without preference. The primary point of contact for inquiries is Rachel Rauchisen, reachable via email at RACHEL.RAUCHEISEN@DLA.MIL or by phone at (215)737-7063, with a fax number provided for alternative communication. The place of performance is not specified, leaving the delivery location undefined in the provided details. All official information and further actions can be accessed through the SAM.gov workspace link associated with the contract.

General Info

16-Gearbox Assy awarded by DoD to Pennsylvania DLA Aviation, contact Rachel Raucheisen.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

Contract Value

$1,107,011

NAICS

333612 - Speed Changer, Industrial High-Speed Drive, and Gear ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Awardee

BELL TEXTRON INCView Profile

Award Issued Date

04/22/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedFeb 19

Presolicitation

Type ChangedMar 6

Presolicitation → Solicitation

AwardedApr 22

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

Contacts1 person available

OfficePHILADELPHIA, PA, 19111-5098, USA

Organization / Agency

Department Of Defense → Pa DLA Aviation At Philadelphia

View Agency Profile

Office AddressPHILADELPHIA, PA, 19111-5098, USA

Contacts

RACHEL RAUCHEISEN

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=5a56018164fe40fbba81fb58a86cdc2a

Similar Contracts

Same NAICS industry code

Positive Nonvehicular Clutch Supply (NSN 3010008049979)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

30--CLUTCH,POSITIVE,NONVEH

Solicitation # SPE7L3-26-T-248E

Solicitation SPE7L3-26-T-248E is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of positive nonvehicular clutches, NSN 3010008049979. This is a total small business set-aside under NAICS code 333612. The requirement consists of two line items: 207 units for general delivery and one unit for First Article Testing. The first article must be delivered to Hill AFB within 90 calendar days of the contract award for government testing and approval. General delivery is scheduled for 700 days after award, with a need ship date of January 25, 2028. The item is designated as a restricted source item requiring engineering source approval by the government design control activity. Contractors must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, and utilize the Wide Area WorkFlow system for all invoicing. Key compliance requirements include the Buy American Act, the Berry Amendment, and CMMC Level 2 certification. Additionally, the use of Class I ozone-depleting chemicals and additive manufacturing processes is prohibited. Quotes must be submitted electronically via the DIBBS portal by September 21, 2026, and should be based on FOB Origin terms.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

30--2-TON CHAIN HOIST

Solicitation # N0010426QBJ41

This solicitation, issued by the Navsup Weapon Systems Support Mech for a 2-ton chain hoist, is a fixed-price contract set aside for small businesses. The procurement is governed by strict technical requirements, including the Individual Repair Part Ordering Data and specific military specifications. Key compliance mandates include a prohibition on the intentional use of mercury, adherence to cybersecurity maturity model certification levels, and strict export controls that prohibit the release of technical documents to foreign nationals without prior approval from the Naval Sea Systems Command. The contract emphasizes a rigorous quality assurance and packaging process, requiring specific cleanliness controls and the use of approved packaging materials. Vendors must review mandatory drawings and data available via the BPMI website and provide a Certificate of Compliance upon material delivery. Pricing for quotations is generally valid for 60 days, and the current closing date for responses is July 23, 2026. All deliverables and technical data must follow the established order of precedence, with contract amendments taking the highest priority.

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

59--SOLENOID,ELECTRICAL

Solicitation # SPE7M1-26-U-6079

Solicitation SPE7M1-26-U-6079 is a Request for Quotations issued by the Department of Defense Maritime Supply Chain for the procurement of electrical solenids under NSN 5945003690865. This is a Total Small Business Set-Aside under NAICS code 333612. The procurement may result in an Automated Indefinite Delivery Contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The estimated annual quantity is one unit, with a guaranteed minimum of one. Delivery is required within 106 days after order, with shipments directed to various CONUS and OCONUS DLA Depots. Approved sources include 0EXU3 832-07521-000 and 0EXU3 832-7521. Quotes must be submitted electronically via the DIBBS portal by September 25, 2026. Award is based on price, provided the offeror is technically eligible; quotes for used, reconditioned, or remanufactured items, or those with a validity period of less than 90 days, will be deemed ineligible. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Additionally, components must be marked according to IPC/JEDEC J-STD-609. Inspection and acceptance will occur at the destination. Payment processing is required through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and compliance with the Buy American and Balance of Payments Program.

MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

30--GEARCASE-MOTOR

Solicitation # SPE7L1-26-T-10T6

Solicitation SPE7L1-26-T-10T6 is a request for quotations issued by the Department of Defense DLA Land and Maritime for the procurement of one Gearcase-Motor, identified by NSN 3010016555477. This is a total small business set-aside under NAICS 333612. Approved sources for the item include Sumitomo Machinery Corp of America (part number CHFMS-6165DB-2537/G71G/4) and Renk Aktiengesellschaft (part number 6463108). The item is to be delivered to the USS Kansas City LCS 22 within 20 days after the award. The contract is a fixed-price agreement with inspection and acceptance occurring at the destination. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system. All quotes must be submitted via the DIBBS portal by the deadline of September 21, 2026. Offerors must comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information.

LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

30--GEAR ASSEMBLY,SPEED DE

Solicitation # SPE7LX-26-U-002H

The Department of Defense, through the DLA Land and Maritime Strategic ACO Program Directorate, is soliciting quotes for the procurement of eight Gear Assembly, Speed DE units under NSN 3010012706525. This is a total small business set-aside under NAICS code 333612. The procurement may result in a unilateral Indefinite Delivery Contract with a one-year term or until the aggregate total of orders reaches 350,000.00 dollars. The government expects approximately two orders per year, with a guaranteed minimum of one. Quotes must be submitted electronically by September 25, 2026. The successful offeror must deliver the items within 255 days, with inspection and acceptance occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 requirements. For bearings, awards are restricted to those manufactured in the United States, its outlying areas, or Canada, provided the domestic component cost exceeds 50 percent of the total cost. Payment and receiving reports must be processed through the Wide Area WorkFlow system. Award will be granted to a responsible offeror whose quote is determined to be the most advantageous to the government based on the price quoted for the estimated annual demand.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-01-359-9445)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Magnetic Nonvehicular Clutch (Sea Sparrow Missile System)

LAND SUPPLY CHAIN

POSTED

DEADLINE

Rotary Gear Operator Supply

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Gearcase-Motor (NSN 3010-01-425-0357)

LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

DEADLINE

Supply of Non-Vehicular Universal Joint Spiders

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Internal Gears (P/N 8C8817-1)

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

81--CONTAINER,SHIPPING

Solicitation # SPRPA126RVC30

This solicitation is for the procurement of aluminum shipping containers, specifically part number 20140, to be manufactured according to Champion Company drawings. The contract is being extended to October 13, 2026, to promote competition. Key technical requirements include the use of specific weld fillers for 6061 and 5000 series aluminum, adherence to AWS welding standards, and the application of an electrodeposited alkaline Zinc-Nickel Alloy finish. Each container must feature a Unique Identification marking on a nameplate and include a specific amount of desiccant based on interior volume. A critical component of this contract is the First Article Testing (FAT) process, which includes dimensional inspections, a form and fit check with a T408-GE-400 engine, and a rigorous 18-inch free-fall drop test followed by pneumatic leak testing. New manufacturers may be subject to pre-award surveys and post-award conferences. While the government estimates first article testing costs at 12,000 dollars, all costs associated with the submission and shipment of FAT samples are the responsibility of the contractor. The contract also specifies strict chemical deoxidizing and mechanical cleaning procedures to be performed immediately prior to welding.

Other Metal Container Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 1 month

81--SHIPPING AND STORAG

Solicitation # SPRPA126RVC10

This solicitation from the DLA Aviation office in Philadelphia is for the manufacture and delivery of aluminum containers according to drawing 875E001. The contract emphasizes strict quality control, requiring adherence to AWS welding standards and specific chemical deoxidizing and cleaning processes to prevent corrosion. Key technical requirements include the use of specific desiccant amounts, the application of Zinc-Nickel Alloy finishing instead of cadmium plating, and the installation of approved shock mounts. Each unit must feature a Unique Identification marking and follow a specific serial number convention. The agreement mandates a rigorous First Article Testing process, including dimensional inspections, a form and fit check, and a series of leak and 18-inch free-fall drop tests. All production units are also subject to a 100% production leak test following a drop test to ensure structural integrity. Contractors must provide their own tooling and manufacturing aids, and new manufacturers may be subject to pre-award surveys and post-award conferences due to the critical nature of the items.

Other Metal Container Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 1 month

16--PUMP,WINDOW WASHER

Solicitation # SPRPA126QUB47

This solicitation, issued by the Department of Defense via DLA Aviation in Philadelphia, is for the procurement of window washer pumps under solicitation number SPRPA126QUB47. The closing date for responses is September 30, 2026. This requirement is issued under EAF authority and is specifically for non-CLSSA Foreign Military Sales, meaning the assets will be owned by customer countries rather than the U.S. Government. Consequently, standard Item Unique Identification and Valuation requirements are waived. Eligible suppliers must be government-approved sources providing newly manufactured spares; refurbished or repaired materials are strictly prohibited. All parts must be FAA-certified and accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Quality requirements include adherence to AS/EN/JISQ 9100 or an equivalent standard. Authorized distributors must provide a formal distributor letter on the source's letterhead at the time of proposal submission to be considered technically acceptable.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

15--DOOR,ACCESS,AIRCRAF

Solicitation # SPRPA126QUC06

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two aircraft access doors under contract NSN 7R-1560-017005796-P8. The acquisition is conducted as a commercial item procurement under FAR Part 12, requiring that all components be newly manufactured spares; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the items must meet all government form, fit, and function requirements. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, a standard commercial warranty, and full supply chain traceability. IUID is not required for these items as they are captured under the parent end item in the DoD registry.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 1 month

16--FIRE CONTROL PANEL

Solicitation # SPRPA126QUC04

This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of two aircraft fire control panels under NSN 7R-1680-016679280-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition is governed by FAR Part 12 and applicable DFARS regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, including technical specifications and sales history, and ensure the components meet all form, fit, and function requirements. A standard commercial warranty covering workmanship and replacement parts is required.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

66--TRANSDUCER,MOTIONAL

Solicitation # SPRPA126QUB95

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new motional transducers under contract NSN 7R-6695-015731832-P8. The items are classified as commercial products and must be newly manufactured; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition follows FAR Part 12 and DFARS 212 regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter on the source's letterhead. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must also provide documentation supporting the item's commerciality, a standard commercial warranty, and technical specifications ensuring the components meet the required form, fit, and function.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

16--TAXI,NOSE GEAR,AIR

Solicitation # SPRPA126QUC02

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new nose gear taxi aircraft components under NSN 7R-1680-015885785-P8. The acquisition is conducted as a commercial item procurement in accordance with FAR Part 12 and DFARS 212, requiring that all provided components be newly manufactured spares. Refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. Suppliers must be government-approved sources of supply and provide an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and conformity to design data. Offerors are required to submit documentation supporting the commerciality of the items, such as sales history or price lists, and must provide full traceability from the original manufacturer. Delivery is specified as FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

48--VALVE,CROSS

Solicitation # SPRPA126QUC03

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of nine aircraft cross valves under NSN 7R-4810-016016223-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and all components must meet the government's form, fit, and function requirements. A critical requirement for this contract is the provision of an FAA Form 8130-3 Authorized Release Certificate to ensure airworthiness and traceability from the original manufacturer. Offerors must provide documentation supporting the commerciality of the items and must be government-approved sources of supply or provide an authorized distributor letter. The acquisition is conducted under FAR Part 12 and EAF Authority, requiring a standard commercial warranty and adherence to specific packaging and labeling standards.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAG

Solicitation # SPRPA126RVC35

This solicitation, issued by DLA Aviation at Philadelphia, seeks the procurement of an aluminum outer shell container and an Inner Frame Adapter Assembly for the T-56 QECA engine. The contract is extended to October 13, 2026, to promote competition and is designated as a total small business set-aside. Manufacturing must adhere to specific Container Research Corporation drawings and AWS welding standards, with a strict requirement for engineering source approval for new manufacturers. Key technical specifications include the use of electrodeposited alkaline Zinc-Nickel Alloy finishing and the installation of specific desiccant and shock mounts. Quality assurance is a critical component of this contract, requiring 100% production leak testing and a rigorous First Article Testing (FAT) process. The FAT includes dimensional inspections, an 18-inch free-fall drop test, and form and fit verification. Contractors must provide a first article sample within 160 calendar days of the contract date to designated facilities in New Jersey. All items must feature Unique Identification (UID) markings and comply with Buy American and Free Trade Agreement certifications.

Other Metal Container Manufacturing

POSTED

DEADLINE

in about 1 month

16--CABIN TEMPERATURE I

Solicitation # SPRPA126QUB92

This solicitation, identified by NSN 7R-1680-016010190-P8 and reference number 162BL902, is for the procurement of one aircraft component determined to be a commercial item. The acquisition is governed by FAR Part 12 and DFARS 212, requiring that the component be currently in production or previously offered in the commercial marketplace. All submitted items must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. To be considered technically acceptable, offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the item's commerciality, such as price lists or sales history, and ensure the component meets all form, fit, and function requirements. Delivery is FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

NRP,FWD FAIRING ASS

Solicitation # SPRPA126QUB93

This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of NRP FWD Fairing Assemblies. The contract requires that all parts be newly manufactured, as refurbished, remanufactured, or repaired materials are strictly prohibited. Suppliers must be government-approved sources and provide FAA-certified parts accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Distributors must submit an authorized distributor letter on the source's letterhead to be considered technically acceptable. The agreement mandates compliance with AS/EN/JISQ 9100 quality standards and includes a 12-month warranty for supplies of a noncomplex nature. Payments are to be processed through the Wide Area Workflow system using combined invoice and receiving reports. While IUID is generally required, it is waived for these commercial items per the PMA-290 implementation plan. The solicitation is issued under EAF authority, and responses are due by October 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

81--NRP,SHIPPING AND ST

Solicitation # SPRPA126RVC02

This solicitation is for the manufacture of plastic containers produced via rotomolding, specifically following drawing 829E001. The contract includes strict quality assurance requirements, including a First Article Test (FAT) involving dimensional inspections, 18-inch free fall drop tests, and pneumatic leak testing. All production units must undergo 100% leak testing and be affixed with a Unique Identification (UID) marking on a nameplate. The contractor is responsible for all tooling, fixtures, and the cost of FAT shipment and repair. Key technical specifications require the use of a specific amount of desiccant per cubic foot and the substitution of alkaline Zinc-Nickel Alloy plating for cadmium. The contract is a total small business set-aside and includes various federal clauses regarding the Buy American Act and the Trade Agreements Act. The current amendment extends the solicitation period to September 23, 2026, to promote competition. New manufacturers must obtain engineering source approval from the design activity and may be subject to pre-award surveys and post-award conferences.

Other Metal Container Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS