This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on May 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

16--SEAT,AIRCRAFT

Closed

SPE4A726T421YFederal

Submission Closed06/04/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

Federal

NIIN: 016230912/NOMEN: RECEIVER TRANSMITTERThe Department of Defense, through NAVSUP Weapon Systems Support in Philadelphia, intends to award a sole source contract to Lockheed Martin for the repair of a specific Receiver Transmitter unit identified by part number 300A380-3 and NIIN 016230912. This procurement will be carried out under NAICS code 336413 and FSC code 1680. Since there are no drawings or data available and the government does not own data rights to this component, Lockheed Martin is anticipated to be the only capable source to perform the repair. The contract will be issued under an existing Basic Ordering Agreement, and other firms wishing to compete must submit a Source Approval Request, although approval will not delay the procurement process. The government plans to solicit and negotiate this repair using FAR Part 15 provisions rather than FAR Part 12, based on market research indicating the specialized nature of the repair. While this is a sole source action, the government invites any interested parties to submit capability statements or proposals within 35 days, which will be reviewed to determine if competition is feasible. Responses must be submitted electronically via NECO, and no phone or hard copy requests will be entertained. The point of contact for this solicitation is Kate N. Schalck, who can be reached via email for submission or inquiries. The response deadline is June 16, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

16--REGULATOR,OXYGEN,DIThis contract pertains to the procurement of 40 units of an oxygen regulator (NSN 7R-1660-015303496-FZ) with delivery terms FOB origin. It represents a follow-on request for proposal (RFP SPRPA1-26-C-YC01) after the cancellation of a previous solicitation, maintaining the same requirement under procurement request number N0038325X1607. Due to the specialized nature of the part, which is flight critical and requires engineering source approval by the design control activity, only previously government-approved sources with unique design capabilities, manufacturing knowledge, and retained technical data are eligible for consideration. The data and expertise needed to maintain quality are not commercially available, so new sources must undergo rigorous qualification procedures approved by the government engineering activity to be considered. The contract action is conducted under a non-competitive procurement strategy per FAR 6.302-1, though all responsible sources may submit expressions of interest or proposals within 45 days for consideration. Prospective bidders not already approved as sources must provide extensive technical data in accordance with NAVSUP Weapon Systems Support source approval brochures to be considered. Timeliness of source approval is critical; if new source qualification cannot be completed before government requirements, awards may proceed with existing sources to meet fleet support needs. The government is not applying commercial item acquisition policies for this solicitation, emphasizing the technical and critical nature of the item. The contracting office overseeing this action is located at DLA Aviation in Philadelphia, PA, with a designated point of contact for inquiries. Access to relevant military specifications and standardized documents is facilitated through government repositories, ensuring compliance and proper evaluation of technical qualifications.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

ACTUATOR,ELECTRO-METhe contract pertains to the solicitation for the procurement of an electro-mechanical actuator, identified by solicitation number SPRPA126QVB83, posted on May 13, 2026, with a response deadline of June 12, 2026. This procurement is managed by the Department of Defense through the Defense Logistics Agency (DLA) Aviation Office in Philadelphia, PA. The contract falls under the NAICS code 336413, which covers aerospace product and parts manufacturing. Key points include adherence to mandatory federal regulations such as item unique identification and valuation requirements, higher-level contract quality standards, and compliance with Buy American and Free Trade Agreements regulations effective through 2024. The solicitation is issued under Emergency Acquisition Flexibilities to expedite the process, with priority rating designated for national defense and emergency preparedness use. The contract also mentions administrative and operational procedures such as the use of Wide Area Workflow for payment instructions, mandatory use of Workflow Pro for modification assistance, and compliance with equal opportunity requirements for veterans and workers with disabilities. Contact information is provided for the primary point of contact at DLA Philadelphia, and all invoicing and delivery instructions are in accordance with specified federal and military standards. Security prohibitions and certifications are also noted, reflecting the contract’s strict adherence to federal acquisition and regulatory policies. The procurement’s place of performance is not specified, but its management and oversight rest with the Philadelphia office of the DLA Aviation agency.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Procurement for Spare Parts for the Pilot, Co-Pilot, and Mechanic Seats for the MH-65E Aircraft.The United States Coast Guard Aviation Logistics Center in Elizabeth City, NC, is soliciting quotations for an Indefinite Delivery Requirements contract with BAE Systems Land & Armaments, L.P. for spare parts specifically for pilot, co-pilot, and mechanic seats on the MH-65E aircraft. This procurement is being conducted on a sole source basis under FAR 12.102(b), as BAE is the original equipment manufacturer and sole distributor within North America capable of supplying the required parts. The contract will have a one-year base period with the potential for four additional one-year options, not to exceed five years total. Only new, approved parts with certificates of conformance and full traceability to the manufacturer will be accepted, ensuring compliance with FAA and military standards critical to flight safety. Substitutes or alternate parts will not be considered. The solicitation number 70Z03826RB0000006 is a combined synopsis/solicitation issued as a Request for Quotation, with no formal solicitation document to follow. Key dates for offer submissions have been extended multiple times, with the final due date set for June 16, 2026, at 4:30 pm EDT. Quotations must be electronically submitted via email with the solicitation number referenced; phone call offers are not accepted. The government reserves the right to make single or multiple awards or no award at all, with the intent to award based on the lowest overall cost including administrative expenses. No drawings, specifications, or schematics are available from the agency, and all procurements must maintain the highest standards of quality to ensure the safety and airworthiness of Coast Guard aircraft.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

15--WING ASSEMBLY,AIRCR- AND SIMILAR REPLACEMENT PARTSThis contract involves the procurement of 13 units of a flight-critical wing assembly (NSN 7R-1560-016002718-QE) designated for aircraft and similar replacement parts, with delivery terms specified as FOB origin. Due to the critical nature of the item and limitations in available technical data, government source approval is mandatory before an award can be made. Only previously approved sources have been solicited because the time required to approve new suppliers typically exceeds the government's procurement timeframe. Potential new sources must submit detailed technical and production experience information as outlined in NAVSUP Weapon Systems Support Source Approval Information Brochures to be considered. Failure to provide or adequately document this information will result in disqualification from the solicitation. This procurement is conducted under a sole-source authority per FAR 6.302-1, with a 45-day window for submissions after posting to allow any potentially qualified suppliers to express interest. The item requires stringent quality assurance maintained by the design control activity, as only the approved sources possess the necessary design knowledge, manufacturing expertise, and proprietary technical data essential for quality assurance. Any alternate source must undergo rigorous qualification procedures approved by the government engineering activity. Additionally, the procurement is subject to applicable trade agreements including the Buy American Act and relevant Free Trade Agreements. The contracting office is NAVSUP Weapon Systems Support, located in Philadelphia, PA, and the point of contact for this acquisition is Christina M. Foley. The solicitation was posted on May 27, 2026, with a response deadline of July 13, 2026.

Navsup Weapon Systems Support

POSTED

about 23 hours ago

DEADLINE

in 30 days

AI Contract Overview

This contract involves the procurement of 18 aircraft seats identified by the National Stock Number 1680009603929, with delivery specified to location W1A8 DLA Distribution within 163 days after order. The item is manufactured under source-controlled drawing specifications, allowing only approved sources designated by specific source codes. The solicitation is structured as a Request for Quote (RFQ) and is accessible exclusively through an online link, with no hard copies available. The seats must conform to the referenced drawing and applicable Military Specifications and Standards, which can be obtained electronically. Interested suppliers who meet the requirements can electronically submit their quotes by the specified deadline of June 4, 2026. The contract is managed by DLA Aviation, an agency within the Department of Defense, operating out of Richmond, Virginia. The procurement falls under NAICS code 336413, reflecting its focus on aircraft manufacturing suppliers. For inquiries, the designated point of contact is reachable via email, and instructions for accessing the solicitation and submitting questions are provided through the official electronic purchasing platform.

General Info

Procurement of 18 aircraft seats, delivered in 163 days, sourced from approved manufacturers, RFQ deadline June 4, 2026.

Agency

Department Of Defense → DLA Aviation

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing View NAICS

Place of Performance

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 27

Combined Synopsis

Response DeadlineJun 4

Deadline has passed

Submission Closed

06/04/2026, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Aviation

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / Agency

Department Of Defense → DLA Aviation

Office AddressRICHMOND, VA, 23237, USA

Contacts

contact@example.gov

Full Description

Proposed procurement for NSN 1680009603929 SEAT,AIRCRAFT: Line 0001 Qty 18 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0163 DAYS ADO This is a source controlled drawing item. Approved sources are 15814 114ES011-3; 76912 ACA4300; 77272 114ES011-3. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. The items furnished must meet the requirements of the drawing cited in the solicitation. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.