Top

1U Gateway System Supply

Active

Federal

Response Deadline07/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 05:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of two rack-mountable 1U Gateway systems for integration into NASA's network infrastructure.

Similar Contracts

Same NAICS industry code

NAICS: 334290

New

Federal

MODULE ASSEMBLY,UHFThe contract pertains to the manufacture and supply of the MODULE ASSEMBLY,UHF under solicitation SPRMM126QHD82, issued by the Defense Logistics Agency (DLA) Mechanicsburg through the Department of Defense. The requirement is solicited under FAR Part 18 Emergency Acquisitions, utilizing emergency flexibilities, and awards will be made using the Lowest Price Technically Acceptable (LPTA) evaluation method. The item must conform to specific military standards including MIL-STD-130 Rev N for marking, ANSI/ESD S20.20 for electrostatic discharge control, and MIL-STD-2073 for packaging, with all work performed at the designated CAGE code 53711. The contractor must hold a government security clearance for secret-level information as outlined in DD Form 254 and must be an authorized distributor of the original equipment manufacturer, with proof of authorization required at submission. All contractual documents are considered issued upon electronic transmission or mail delivery, and compliance with mandatory electronic processes through PIEE-WAWF for invoice and receiving report submission is required. The contract mandates strict adherence to design control, prohibiting any substitution or change in part number, material, or assembly without prior written approval from the NAVICP-MECH Contracting Officer, with specific code classifications (1–6) required for any proposed changes. Records of all inspections and quality control measures must be maintained for 365 days post-delivery. The contractor must register for Electronic Data Access (EDA) on the PIEE portal and provide direct contact information to support communication, automated notifications, and order tracking via NAVSUP WSS. Any change in production facilities must be formally requested, approved, and accompanied by a $250 administrative fee, without altering labor surplus or small business performance obligations. Compliance with cybersecurity maturity certification requirements, small business representations under NAICS 334290, and prohibition against unauthorized disclosures under distribution statement codes (including X for export-controlled data) are enforced. The response deadline is October 22, 2026, and only offers from qualified entities with verified distributor status will be considered for award.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solar-Powered Radar Speed and Message Trailers

POSTED

DEADLINE

Alertus Integration & Outdoor Speakers - KC VAMCThe contract opportunity titled Alertus Integration & Outdoor Speakers - KC VAMC is issued under solicitation number 36C25526Q0539 by the Department of Veterans Affairs through the 255-NETWORK Contract Office 15 located in Leavenworth, Kansas. The solicitation, posted on July 24, 2026, seeks input from potential vendors regarding the integration of the Alertus emergency notification system with outdoor speaker infrastructure at the Kansas City Veterans Affairs Medical Center, with a response deadline of August 7, 2026. The primary point of contact for inquiries is Tywanna Sparks, reachable via phone or email, and the work will be performed at the facility in Kansas City, Missouri, with a ZIP code of 64128. This is a sources sought notice with no set-aside classification, meaning all eligible businesses may respond, and it falls under NAICS code 334290 for other communications equipment manufacturing, indicating a focus on specialized hardware and system integration solutions.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

58--AMPLIFIER-MODULATOR, IN REPAIR/MODIFICATION OFThe U.S. Navy’s NAVSUP Weapon Systems Support in Mechanicsburg intends to award a sole-source contract to NORTHROP GRUMMAN SYSTEMS CORPORATION for the repair of five-eight amplifier-modulator units with NIIN 7H-5895-014853306-GL and part number 5D89702G01, exclusively due to the company’s status as the original equipment manufacturer and the only qualified source capable of providing spares support with no alternative suppliers available. The Government does not own or hold rights to the technical data required to source these units elsewhere, necessitating non-competitive acquisition under 10 U.S.C. 2304(c)(1) and FAR 6.302. Deliveries are split between two locations: 58 units to New Cumberland, Pennsylvania and an equal quantity to Tracy, California, both under DLA Distribution channels. The contract is classified as an emergency acquisition with a one-year duration, and UID marking and Buy American provisions will apply. No drawings or technical data are available, and the procurement is exempt from commercial item acquisition procedures under FAR Part 12. The solicitation will be issued electronically via NECO on or about August 7, 2026, with responses due by September 7, 2026, and an anticipated award date of September 22, 2026. While this notice is not a formal request for proposals, submissions received within 45 days of publication will be considered for competitive evaluation purposes if the Government determines a need to shift from sole-source sourcing. Only firms already approved as sources for this item may be awarded, new vendors must submit a Source Approval Request, though the schedule will not be extended for approval. The NAICS code is 334290, and this procurement is not set aside for small business. All correspondence must be sent via email to Jessica Grzywna at jessica.t.grzywna.civ@us.navy.mil; no phone calls or hard copies will be accepted. Options may be added to the contract, and electronic procedures will govern all aspects of the acquisition.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Cellular Booster MCRC Brooklyn, NYThe U.S. Marine Corps Forces Reserve is seeking cellular signal boosters to be installed in Brooklyn, New York, under solicitation M6786126Q0026, which is a total small business set-aside as defined by the Small Business Administration under FAR 19.5. The requirement falls under NAICS code 334290 and is managed by the Department of Defense’s Office of the Director of Contracting, with the official office located in New Orleans, Louisiana. All proposals must be submitted by 12:00 CST on July 27, 2026, to the designated points of contact, Adam Dillard and Oscar Quintana, with questions due no later than July 22, 2026. The performance location is specified as Brooklyn, NY, zip code 11234, and detailed technical specifications, evaluation criteria, and site survey contacts are outlined in the solicitation document, particularly on page 21. The contract opportunity is exclusively reserved for small businesses, and submissions must adhere to the instructions and deadlines provided in the official solicitation posted on SAM.gov.

Director Of Contracting

POSTED

DEADLINE

MODULATOR, RADIO TRANSMThe contract pertains to the procurement of seven MODULATOR, RADIO TRANSM units identified by NSN 5865-01-178-2734 under purchase request 7014870421. The solicitation, numbered SPE4A7-26-Q-0285, was posted on July 23, 2026, with a response deadline set for August 6, 2026. This request is issued by the Defense Logistics Agency, a division of the Department of Defense, and is categorized as a federal procurement. The solicitation does not specify a set-aside type, NAICS code, or detailed office address, but the place of performance and point of contact information are unspecified. Interested parties must respond through the official DIBBS platform via the provided UI link before the deadline to be considered for award.

Defense Logistics Agency

POSTED

DEADLINE

OSCILLATING GROUPThe contract pertains to the procurement of an oscillating group item with NSN 5955-00-188-7152, quantity of seven units, under solicitation SPE7M1-26-T-223N, issued by the Department of Defense’s Maritime Supply Chain organization. The procurement is set aside exclusively for small businesses under the SBA total small business set-aside provision, with a due date for responses on August 3, 2026, and a required delivery date 484 days after award. The item is subject to strict technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, applicable at the time of solicitation or award depending on acquisition size. Configuration control and engineering change proposals must adhere to specified management protocols, and any request for deviation or waiver must be formally submitted. The item contains export-controlled technical data regulated under ITAR or EAR, restricting dissemination to authorized entities only—specifically, contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA approval. Non-accepted supplies must have all government identification removed, and the contractor must hold a CMMC Level 2 certification from an accredited third-party assessment organization. The required performance location is New Cumberland, Pennsylvania, with primary point of contact Ryan Snyder at the DLA.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

COVER, ELECTRONIC COThis contract specifies the procurement of a COVER, ELECTRONIC CO under solicitation SPE4A7-26-T-560N, with a delivery requirement of four units to be furnished FOB origin and accepted at destination after a 172-day delivery window ending January 5, 2027. The item is identified by NSN 5895016590007 and is subject to strict adherence to DLA packaging standards including MIL-STD-2073-1E for preservation and MIL-STD-129 for marking, with no special marking required. Packaging must comply with DLA’s RP001 requirements and prohibit any mercury or mercury-containing compounds in preservation, packaging, or marking materials per IP056. The contractor must follow zero-based sampling methods outlined in MIL-STD-1916 or ASQ H1331, with specified verification levels and AQLs for attributes, and may not use mercury in any component except in approved functional applications such as specific batteries, instruments, or sensors authorized by NAVSEA, all of which must include secondary containment. All measuring and test equipment and supply materials must avoid intentional mercury introduction. The contract references the DLA Master List of Technical and Quality Requirements for incorporated technical and quality standards, and requires compliance with ANSI X12 unit of issue standards as defined by DLA’s official documentation. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, under transportation guidelines specified in DLAD Proc Notes C19 and C20.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

MULTIMETERThe contract pertains to the procurement of 142 units of the Fluke 177 digital multimeter, identified by NSN 6625-01-489-5585 and part number FLUKE 177, classified as a commercial off-the-shelf item that may contain batteries. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede commercial packaging standards such as ASTM D3951. Packaging must comply with FED-STD-313 and MIL-STD-129 for marking and labeling, with palletization following DLA’s RP001 packaging guidelines. If deemed non-hazardous, commercial packaging per ASTM D3951 is acceptable, but DLA requirements take precedence. Delivery is FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The required delivery date is 87 days from contract award, with a must-ship date of October 30, 2026, and original delivery due by November 5, 2026. The order is issued under solicitation SPE7M1-26-T-227H, a small business set-aside with NAICS code 334290, managed by the Department of Defense’s Maritime Supply Chain. The primary point of contact is Michael Reese, reachable via email and phone. The delivery address is the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The unit of issue is each (EA), with a total contract value of $142.00 per unit, amounting to $20,164.00. All packaging, labeling, and documentation must align with the DLA Master List, and the vendor must adhere to the solicitation’s response deadline of August 3, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

PLATE, MOUNTINGThe contract pertains to the procurement of a mounting plate identified by part number 12272-3317-01 and NSN 5895-01-701-2637, with a quantity of 45 units at a unit price of $45.00, totaling $2,025.00. The item is classified as a critical application item supplied by L3Harris Global Communications, Inc., and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which include specific documentation, packaging, marking, and inspection protocols. Packaging must adhere to MIL-STD-2073-1E with preservation method 33, and all marking must conform to MIL-STD-129 without special marking codes. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Delivery is FOB origin with a five-day lead time and no quantity variance permitted, and inspection and acceptance occur at the destination. The item must be shipped by the fastest traceable means, excluding parcel post, to the receiving location at Tobyhanna Army Depot, Building 1, Bay 6, with the freight delivery address at ASRS 1C, Bay 6, Tobyhanna, PA. The required delivery date is July 20, 2026, and the RDD is set at 250 days from the contract issuance. The shipment must be palletized per DLA packaging requirements and marked with the appropriate government identifiers. The contract is governed by solicitation SPE4A6-26-T-09HG, with a response deadline of July 31, 2026, and is issued under the Department of Defense’s COMMODITIES DIVISION. All shipments must be directed to the specified government address and labeled for the designated point of contact, with additional government-use codes applied for tracking and logistics purposes.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

JOYSTICK, DATA ENTRYThe contract is for the procurement of six joystick units with NSN 5895-01-700-3399 and part number 4324374 from OSHKOSH DEFENSE LLC under solicitation SPE7L5-26-T-4610. The delivery is required within 168 days from contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must comply with strict packaging standards per MIL-STD-2073-1E and MIL-STD-129, including individual waterproof barrier bagging with heat sealing, cushioning around connectors, and proper labeling without contact between tape and product. Packaging must avoid mercury or mercury compounds and prohibit ozone-depleting chemicals. The unit container is to be palletized and marked per DLA requirements, with delivery addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces compliance with the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date governs. The purchase price is $6.00 per unit for a total of $36.00, and the shipment must be delivered no later than January 19, 2027, with an original required delivery date of November 28, 2026. All technical specifications referenced are incorporated by inclusion from the DLA website, and the NAICS code 334290 applies. Point of contact is Bradley Evans at the Department of Defense.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

AMMETERThis contract is for the procurement of five ammeters under solicitation SPE7M1-26-T-227F, with a required delivery within 168 days and a delivery point set at origin, inspected and accepted at destination. The item is identified by NSN 6625-01-452-3965 and part number 299S005-7, furnished by EMS DEVELOPMENT CORPORATION, and must comply with all applicable DLA packaging and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Packaging must meet specific codes: U for pack code, 42 for preservation method, dry condition, and D3 unit container, with no special marking required. The contract prohibits intentional addition of mercury or mercury compounds to the supplied hardware except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or authorized reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. Hazardous materials shipping follows DLAD Proc Note C19, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The purchase unit is each, with a fixed quantity of five units at a unit price of $5.00, totaling $25.00, with zero variance allowed. The contract requires removal of government identification from non-accepted supplies and adherence to DLA’s standardized unit of issue guidelines. All submissions must be received by August 3, 2026, and the primary point of contact is Michael Reese at DLA, reachable via phone or email as provided.

MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days

View Details

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 332999

New

Federal

SCBA Breathing Air Line InstallationThe contract is for the installation of a SCBA-compatible breathing air line designed to extend to the ladder tip, enabling firefighters to maintain a continuous and reliable supply of breathable air during elevated operations. This system is critical for ensuring responder safety when performing tasks at height, eliminating the need to rely solely on portable SCBA tanks and reducing the risk of air supply interruption during emergencies. The work must be executed to strict technical standards that guarantee compatibility with standard SCBA equipment and structural integrity under operational stress. The solicitation was posted on July 24, 2026, with a response deadline of August 3, 2026, and is classified as a subcontract under NAICS code 332999 for other fabricated metal product manufacturing. The project is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance required at Stennis Space Center in Mississippi, zip code 39529. While no set-aside details or point of contact information are specified, the scope clearly targets qualified subcontractors capable of delivering engineered breathing air systems for high-risk firefighting environments.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Rescue Tool Mounting System (Pac Mounts & Carousel Mounts)The contract involves the supply and installation of specialized mounting systems for rescue tools, specifically Pac Mounts for hand tools and carousel mounts for Hurst/TNT e-tools, to ensure secure and easily accessible storage aboard fire and rescue vehicles. These mounting solutions must meet rigorous operational standards to support rapid deployment in emergency scenarios while maintaining tool integrity and vehicle space efficiency. The work is required at Stennis Space Center, Mississippi, with a delivery and installation timeframe governed by a response deadline of August 3, 2026. The contract is classified as a subcontract under NAICS code 332323, which pertains to metal fabrication, and is being managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. All components must be compatible with existing rescue vehicle configurations and adhere to safety and durability requirements expected in high-stress environments.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Thermal Imaging Camera Supply (FLIR K-85N or Equivalent)NASA Shared Services Center is seeking suppliers to provide FLIR K-85N thermal imaging cameras or an approved equivalent for integration into Ladder/Tower Units used in firefighting and rescue operations at Stennis Space Center. The cameras must meet operational requirements for enhanced visibility in low-light and smoke-filled environments, ensuring safety and effectiveness during emergency response scenarios. This subcontract opportunity has a response deadline of August 3, 2026, and falls under NAICS code 334510 for navigation, measuring, electromedical, and control instruments manufacturing. The equipment will be deployed at a specified performance location in Stennis Space Center, Mississippi, with no set-aside classification applied. All proposals must be submitted prior to the deadline to be considered for award.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Power Inverter Supply & IntegrationNASA Shared Services Center is seeking a subcontractor to supply and integrate an 8,000-watt continuous power inverter with a 9,000-watt peak capacity to enable 110VAC shoreline power for charging rescue tools on a vehicle. The inverter must reliably convert shore power into stable AC output suitable for mission-critical emergency equipment, ensuring operational readiness at the Stennis Space Center location with ZIP code 39529. The solicitation is open for responses until August 3, 2026, under NAICS code 335313, which corresponds to electric lighting equipment manufacturing. The contract type is classified as a subcontract, and while no set-aside program is specified, all interested parties must meet technical and integration requirements aligned with NASA’s operational standards for safety, durability, and power efficiency in field-deployed systems.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Generator Supply & Installation (CARB-Compliant)The contract calls for the supply and installation of a 5300W generator that meets California Air Resources Board (CARB) compliance standards, designed to be a Honda-equivalent unit integrated directly into a vehicle’s existing power system for emergency operational use. The generator must be fully compatible with the vehicle’s electrical architecture to ensure seamless power delivery during critical scenarios, with emphasis on reliability, emissions compliance, and minimal environmental impact. Installation must be performed to industry-standard protocols to maintain vehicle warranties and operational integrity. This subcontract is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance required at Stennis Space Center, Mississippi, 39529. The solicitation was posted on July 24, 2026, and responses are due by August 3, 2026, at 7:00 PM Eastern Time. The North American Industry Classification System code 333111 indicates the scope falls under generator manufacturing and related equipment production. The contract is not subject to any specific set-aside designation, and while no point of contact is provided, all submissions must adhere to the terms outlined in the SAM.gov posting.

Farm Machinery and Equipment Manufacturing

POSTED

DEADLINE

Fire Apparatus Customization & IntegrationThe contract involves the customization and integration of a Ladder/Tower Unit fire rescue vehicle designed to meet NFPA 1901 standards, requiring extensive chassis modification, body fabrication, and full integration of electrical and hydraulic systems. This specialized work ensures the vehicle is engineered for optimal performance in emergency response scenarios, with all components compliant with national safety and operational requirements. The project demands precision in assembly and system coordination to guarantee reliability under high-stress conditions typical of fire and rescue operations. The work is to be performed at Stennis Space Center with a zip code of 39529, and submissions are due by August 3, 2026, by 7:00 PM. This is a subcontract opportunity under NAICS code 336212, which classifies it within the Motor Vehicle Body Manufacturing sector. The contracting entity is the NASA Shared Services Center, operating under the National Aeronautics and Space Administration, although specific point of contact details are not provided. The solicitation was posted on July 24, 2026, and interested parties must respond through the designated SAM.gov portal before the deadline.

Truck Trailer Manufacturing

POSTED

DEADLINE

Supply of Brand-Name or Equivalent Capability Trunk CablesNASA Shared Services Center is seeking specialized trunk cables with eight bundled sub-cables, each containing color-coded conductors in red, brown, yellow, orange, violet, gray, blue, and green. The requirement is for brand-name or equivalent capability cables with no installation or additional value-added services included. This contract is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by the NAICS code 334516. The solicitation was posted on July 24, 2026, with proposals due by July 28, 2026. Performance of the contract will be carried out at Stennis Space Center, Mississippi, with a zip code of 39529. All submissions must meet the technical specifications outlined for the cable configuration and comply with the small business set-aside requirements.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

HPX-1 Plus Computed Radiography System

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

The contractor shall provide machining services for approximately 250 Government-furnished GRX-810 additive manufactured (AM) tensile blanks in accordance with the attached drawings and specifications. The Government will furnish the GRX-810 blanks. The cThe contractor is required to provide machining services for approximately 250 Government-furnished GRX-810 additive manufactured tensile blanks in strict accordance with provided drawings and specifications. GRX-810 is a nickel-based superalloy exclusively furnished by the Government and may not be substituted or procured by the contractor under any circumstance. All work must be completed and delivered to NASA Glenn Research Center in Cleveland, Ohio, within a lead time of twelve weeks or less, with delivery terms specified as FOB Destination, meaning risk of loss and title transfer occur upon arrival at the destination. The contract is a Firm-Fixed-Price award under a Total Small Business Set-Aside using the Lowest Price Technically Acceptable (LPTA) evaluation method, where offers must be technically acceptable to be eligible for award, and the lowest-priced compliant offer will be selected. Offerors must submit their bids via email to Shanna L. Patterson at Shanna.l.Patterson@nasa.gov, clearly referencing the solicitation number 80NSSC26938931Q in the subject line, and include their CAGE/UEI code, FOB destination, lead time for delivery, and point of contact name and email. Payment will not be made by credit card and is subject to Government payment procedures. The contractor must comply with all applicable export control regulations including ITAR and EAR, particularly regarding access to controlled technical data at the delivery site by foreign persons, and obtain necessary export licenses in advance. Duty-free entry provisions under FAR 52.225-8 apply if foreign-sourced supplies exceed $20,000 in value, requiring advance notification to the Contracting Officer, proper marking of packages with “UNITED STATES GOVERNMENT” and agency title, inclusion of shipping documents, and adherence to customs regulations under 19 CFR Part 142. The contractor must maintain complete records of export compliance and flow down applicable clauses to subcontractors. All deliveries must be properly documented with the contract number, delivery address, carrier details, and notation of duty-free entry. The contracting office is the NASA Shared Services Center located at Stennis Space Center, Mississippi, and only small business entities registered in SAM.gov with accurate CAGE/UEI information are eligible to respond. No contract value has been disclosed and will be determined upon award based on submitted pricing.

POSTED

DEADLINE

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

AAR Mobility SystemsThe contract opportunity titled AAR Mobility Systems under solicitation number 80NSSC26937581Q is a total small business set-aside as defined under FAR 19.5, targeting small business concerns for award. It was posted on July 24, 2026, with a response deadline of July 27, 2026, at 9:00 PM CT, suggesting a short turn-around period for submissions. The solicitation is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with the office located at Stennis Space Center, Mississippi, and the place of performance specified as Edwards, California, 93523. The NAICS code 332999 indicates the nature of the work involves other miscellaneous manufacturing, which may relate to mobility systems or specialized equipment support. Primary and secondary points of contact are Tracy Bremer and Will Garrett, both reachable via NASA email addresses. The contract is classified as combined, suggesting it may integrate elements of both acquisition and service procurement, though specific deliverables, pricing, performance timelines, evaluation criteria, and technical requirements are not accessible due to system errors and unauthorized access issues. No contract clauses, specifications, packaging requirements, inspection standards, or special conditions are available, and the estimated contract value remains unspecified. All solicitation documents including the RFQ, SOW, and Q&A are referenced as attached but unavailable for review in this context.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Capability Trunk CableVendors must submit quotes for Capability Trunk Cable under solicitation number 80NSSC26934493Q-1, a total small business set-aside with NAICS code 334516, issued by the NASA Shared Services Center at Stennis Space Center, Mississippi. The requirement is brand name or equivalent, and responses must reference the tracking number in the email subject line. Delivery must be FOB destination, with specified leadtime included in the bid, and vendors are required to provide their CAGE/UEI code. Payment will not be made by credit card. The point of contact for this solicitation is Shanna Patterson, reachable at shanna.l.patterson@nasa.gov. All bids are due by July 28, 2026, and the contract is targeted for performance at Stennis Space Center, MS, 39529.

Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days

View Details