Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

20--CARRIAGE PLATE ASSE

Active
SPE7M126U4477Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The procurement targets the carriage plate assembly with NSN 2090015059967, requiring a quantity of six units, with delivery to be completed within 61 days after award. This solicitation may result in an Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, whichever comes first, with an estimated four orders annually and a guaranteed minimum of one unit. Items will be shipped to multiple Department of Defense Logistics Agency depots across CONUS and OCONUS locations through consolidated and containerized shipping points. Only approved sources identified as 0BJH3 IM-LPD-312 and 0BJH3 Q7924-01 R4 REF 7 are eligible for award. The requirement is issued as a Request for Quotation open to all responsible small business concerns under a Total Small Business Set-Aside classification, with NAICS code 114119. Quotes must be submitted electronically through the SAM.gov portal by the deadline of August 3, 2026, with no hard copies available. No specifications, plans, or drawings are provided, and inquiries must be directed via email to the designated point of contact listed in the solicitation document.

General Info

Six carriage plate assemblies ordered under small business set-aside, delivery in 61 days, to DOD depots via approved sources.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

NAICS

114119 - Other Marine FishingView NAICS

Place of Performance

OH

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Land And Maritime
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / Agency
Department Of Defense → DLA Land And Maritime
View Agency Profile
Office AddressCOLUMBUS, OH, 43218-3990, USA
Contacts
contact@example.gov

Full Description

Show more
Proposed procurement for NSN 2090015059967 CARRIAGE PLATE ASSE: Line 0001 Qty 6 UI EA Deliver To: By: 0061 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 4. The Guaranteed Minimum quantity will be 1. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved sources are 0BJH3 IM-LPD-312; 0BJH3 Q7924-01 R4 REF 7. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

NAICS: 114119
New
DIBBS
FOOTREST, CHAIR, HELMThe contract pertains to the procurement of three units of a footrest, chair, and helm assembly identified by NSN 2090-01-648-0816 and part number 580-1-010 from STIDD SYSTEMS, INC. Delivery is required within 238 days of contract award, with a firm delivery deadline of March 30, 2027, and all items must be shipped FOB origin with zero variance in quantity. All supplies must comply strictly with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes. The items must be packed in unit containers D3, with intermediate containers labeled E5 and packed under preservation method 10 using dry, non-corrosive materials. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must be approved unless explicitly authorized by the specification. Inspection and acceptance occur at the destination facility, and the delivery address is the DLA Distribution center at New Cumberland, Pennsylvania. The contract is issued under solicitation SPE7M4-26-T-272G, with technical and quality requirements governed by the DLA Master List, and the governing revision is determined by the solicitation issue date. Pricing is fixed at $3.00 per unit, totaling $9.00 for the three units, and the point of contact for inquiries is Rory O’Reilly of the Fluid Handling Division within the Department of Defense.
FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 114119
New
DIBBS
WINDOW, MARINEThe contract solicitation SPE7M4-26-T-271M is for the procurement of one marine window, identified as a commercial item under NSN 2090-01-324-5694. Delivery is required 664 days after the delivery order is issued, with FOB Origin terms and performance fulfilled at the DLA Distribution facility in New Cumberland, Pennsylvania. The item is subject to strict export control under ITAR or EAR, restricting technical data disclosure to foreign persons unless prior authorization is obtained from the Department of State or Commerce; only DLA contractors with approved JCP certification, completed training modules, and explicit authorization may access such data. Packaging must comply with MIL-STD-2073-1E, including preservation method 10 and a prohibition on intentional mercury usage with limited functional exceptions; marking must adhere to MIL-STD-129, incorporating Hazard Communication Standard labeling for hazardous materials and special codes for radioactive substances. The contractor is required to safeguard covered defense information in accordance with DFARS 252.204-7012, report cyber incidents, and prohibited from using covered telecommunications equipment under DFARS 252.204-7018. Hazardous materials must be labeled per 29 CFR 1910.1200, with prior submission of warning labels and MSDS required before award. The solicitation mandates compliance with clauses on employment eligibility verification, trafficking in persons, sustainable products, whistleblower rights, and subcontractor compliance for commercial items. Pricing is not specified in the solicitation, and payment will be processed via WAWF using an invoice and receiving report. Offerors must provide UEI and CAGE codes, attest to small business status if applicable, and submit proposals electronically through the DIBBS portal by the deadline of July 31, 2026. No contract type is specified at this stage, though a firm-fixed-price arrangement is likely given the commercial nature of the item. Inspection and acceptance will occur at the destination, with government personnel responsible for verification. There is no assigned Contracting Officer’s Representative listed, and no evaluation factors for award are disclosed in the released information.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 114119
New
DIBBS
HATCH, MARINEThe contract pertains to the procurement of a marine hatch, identified by NSN 2040-01-728-0440 and part number P0002844-118, with a single unit quantity requiring delivery within 20 days of contract award. Delivery must be made FOB origin, with no tolerance for variance in quantity, and is subject to strict packaging and marking requirements per MIL-STD-2073-1E and MIL-STD-129, including the use of packaging code U and prohibited use of parcel post. All packaging must comply with DLA’s standardized procurement guidelines, and shipments must be sent via the fastest traceable means to the specified delivery point at Assault Craft Unit 4 in Virginia Beach, Virginia. The contract explicitly prohibits the use of Class I ozone-depleting chemicals in any component, overriding any conflicting specification requirements, and requires approval for any substitute chemicals unless explicitly authorized. Inspection and acceptance occur at the destination, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation issue or award date depending on acquisition size. The contract is issued under solicitation SPE7M4-26-T-271C, with an original required delivery date of July 10, 2026, and the point of contact is Rory O’Reilly of the Defense Logistics Agency’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 114119
New
DIBBS
CONNECTING ROD ASSEMBLThe contract calls for the procurement of four connecting rod assemblies identified by NSN 2040015804825 and associated part numbers from Electric Boat Corporation, with delivery required within 157 days after award to the Defense Logistics Agency distribution center in Tracy, California. All items must be packaged in strict compliance with MIL-STD-2073-1E, using preservation method 31—cleaning and drying with no additional preservation, wrapping, or cushioning materials—and marked per MIL-STD-129 with no special labeling requirements. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001), and government identification must be removed from any non-accepted supplies. The use of Class I ozone-depleting chemicals is prohibited regardless of specification allowances, and any substitute materials require prior approval unless explicitly authorized. Inspection and acceptance occur at the destination point, and all deliveries are FOB origin. The contract incorporates by reference the DLA Master List of Technical and Quality Requirements through RA001 and mandates compliance with hazardous material labeling standards under 29 CFR 1910.1200, alongside prohibitions on hexavalent chromium and defense telecommunications equipment from prohibited entities. Electronic invoicing must be submitted via Wide Area WorkFlow, and the contractor must certify compliance with employment eligibility, combating trafficking in persons, sustainable products, and cybersecurity safeguards as defined by applicable FAR and DFARS clauses including 52.222-50, 52.223-23, and 252.204-7012. Pricing information is unpopulated in the contract structure, suggesting an unconfirmed value. Proposals must be submitted electronically through DIBBS by July 31, 2026, with no paper or email submissions permitted.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 114119
New
Federal
20--CONNECTING ROD ASSEMBLThe contract solicitation seeks four connecting rod assemblies under NSN 2040015804825, with delivery required to DLA Dist San Joaquin within 157 days after award. Only approved sources—identified by part numbers 42861-1505 ITEM 18, 4685192-0018UK, and 87861-1505 ITEM 18—are eligible to respond. The solicitation is issued as an RFQ under number SPE7M426T271U, published on July 20, 2026, with quotes due by July 31, 2026. No physical copies of the solicitation are available; all submissions must be made electronically through the provided SAM. gov link. Technical specifications, plans, or drawings are not provided, and no set-aside preferences apply. All responsible vendors who submit timely electronic quotes will be considered. Inquiries must be directed via email to the designated point of contact, with additional guidance available through the DIBBS solicitation portal using the assigned solicitation number. The procuring agency is the DLA Land and Maritime under the Department of Defense, located in Columbus, Ohio.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 114119
New
DIBBS
CARRIAGE PLATE ASSEThe contract solicitation SPE7M1-26-U-4477 is a Total Small Business Set-Aside for the procurement of six carriage plate assemblies under an indefinite-delivery contract, with an estimated annual requirement of six units and a maximum contract value of $350,000. Delivery is required within 61 days of order placement, with title and risk of loss transferring to the government at the contractor’s origin under FOB origin terms, and final inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and be palletized according to DLA’s RP001 requirements, with all labeling and marking adhering strictly to MIL-STD-129; however, the DLA Master List of Technical and Quality Requirements supersedes all other standards where applicable. The item is subject to strict prohibitions on ozone-depleting chemicals and mercury or mercury-containing compounds, with exceptions limited to specific functional uses such as batteries, lights, instruments, and weapons systems as defined by NAVSEA, and portable mercury-containing devices must include a secondary containment boundary. Contractors must comply with federal cybersecurity requirements including NIST SP 800-171 safeguards and immediate reporting of cyber incidents under DFARS 252.204-7012, while also providing updated Safety Data Sheets for any hazardous materials and ensuring compliance with hazard communication standards. The solicitation mandates representations of small business status and prohibits the inclusion of covered defense telecommunications equipment from communist Chinese military companies. Payment must be processed electronically through Wide Area WorkFlow, and contractors must provide a Unique Entity ID and CAGE code, while also informing employees of whistleblower rights and abiding by regulations limiting the use of mandatory arbitration agreements. All contract clauses, including those on trafficking in persons, sustainable products, and employment eligibility verification, are incorporated with deviations dated February 2026, and the contract is governed by the Federal Acquisition Regulation with specific emphasis on small business performance and accountability.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 114119
New
DIBBS
REPAIR KIT, INFLATABThis contract solicits the procurement of a repair kit for inflatable equipment designated by NSN 2090-01-717-6760 and part number E3520057, with a requirement for two units to be delivered within 20 days to Camp Lejeune, North Carolina. The kit must comply with stringent technical, quality, and packaging standards, including adherence to MIL-STD-2073-1E for preservation and packaging as a kit, and MIL-STD-129 for marking. The item is classified as a Type I (Code H) with a non-extendable shelf life of 12 months, and it is designated as a critical application item. The contractor must ensure no Class I ozone-depleting substances are used in any phase of design, manufacturing, or cleaning, and mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional components like batteries or sensors. Any hazardous materials must be identified per FED-STD-313, with accompanying Material Safety Data Sheets and hazard labels submitted at the quote stage. Packaging must follow DLA-specific requirements, and shipment must utilize traceable freight methods—parcel post is explicitly forbidden. Delivery is FOB origin, inspection and acceptance occur at destination, and the quantity variance is strictly zero percent. The contract explicitly overrides any conflicting specification requirements related to ODS or mercury, but does not relieve the supplier of meeting all product performance standards. The point of contact is Rory O’Reilly at the DLA Fluid Handling Division, and responses must be submitted by July 30, 2026.
FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 114119
New
DIBBS
SEAT, MARINEThe contract solicitation SPE7M4-26-T-266G is for the procurement of one marine seat, identified by NSN 2090200133086, with an original required delivery date of July 9, 2026, and a 20-day delivery window after order placement. The item must be delivered FOB origin to the designated government location in Port Hueneme, California, and inspection and acceptance are to occur at destination. Packaging must conform to ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, and all packaging and labeling must strictly follow MIL-STD-129, including correct barcoding, shipment identifiers such as RDD 777, M/F N4242061801503, PROJ ZH9 TP 2, and other government-specific codes. The unit of issue is EA with zero variance allowed. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted, such as in functional batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified chemical reagents; portable items containing mercury must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. Palletization must meet DLA Packaging Requirements RP001, and shipments must be sent via the fastest traceable means—parcel post is explicitly forbidden. The contract value is $5,920.87 based on prior procurement history, with no option quantities specified. Contractors must comply with multiple FAR and DFARS clauses including cybersecurity requirements under NIST SP 800-171, transportation by sea under 252.247-7023, safeguarding of defense information, prohibition of hexavalent chromium and covered telecommunications equipment, and representation of small business status. Invoicing must be submitted electronically through WAWF, and the contractor must possess a valid UEI and CAGE code. Compliance with hazard communication standards, sustainable products, employment eligibility verification, equal opportunity, and combating human trafficking are all contractually mandated. The contracting officer retains discretion over contract type and award basis, and no formal evaluation factors or adjectival ratings are provided in the solicitation.
FLUID HANDLING DIVISION

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 114119
New
DIBBS
STRAINER, HULL INTAKThe contract pertains to the procurement of a Strainer, Hull Intake with NSN 2040-01-729-5583, requiring a single unit to be delivered within 20 days FOB destination under solicitation SPE7M4-26-T-268W. The item is classified as a critical application and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly permitted by the specification. Acceptance occurs at the destination, and the item must be packaged per ASTM D3951, labeled and marked in accordance with MIL-STD-129, and palletized following DLA Packaging Requirements. The unit of issue is each, with no variance allowed in quantity. Delivery must be made via traceable transportation methods, excluding parcel post, to the vessel shipment address for USS JACKSON LCS 6 at FPO AP 96692, with the required delivery date set for July 9, 2026. Only approved suppliers, Thomas Willcox Co., Inc. and Eaton Filtration LLC, with part number XST550SHRE, are authorized to fulfill this requirement. All packaging and shipping must adhere to DLA procedural notes, and government-specific codes and identifiers must be applied as specified for tracking and compliance.
FLUID HANDLING DIVISION

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 114119
New
DIBBS
WINDOW, MARINEThe contract is for the procurement of a marine window, identified by NSN 2090200092538, with a single unit of issue and a delivery requirement of 271 days from order receipt, targeting an original delivery date of April 25, 2027. Delivery is FOB origin, with inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania, managed by DLA Distribution DDSP. Packaging must strictly adhere to MIL-STD-2073-1E with a clean/dry preservation method, linen or paper wrap, foam cushioning, and a unit pack code, and marking must follow MIL-STD-129 including the special fragile glass marking code 36 and 2D Data Matrix barcoding with NSN and lot information. The item is subject to strict prohibitions on the intentional use of mercury and mercury-containing compounds except in specified exempt applications like batteries, instruments, and weapon systems, with portable items requiring shockproof design and secondary containment per NAVSEA 5100-003D. Use of any Class I ozone-depleting substances in manufacturing or processing is banned unless prior written approval is obtained from the contracting officer, with exceptions for commercial items as defined in FAR 11.001. Compliance with hazardous material labeling under 29 CFR 1910.1200 is required, and hexavalent chromium is prohibited. Invoicing must be submitted electronically via WAWF, and the contractor must represent its small business status and comply with employment, trafficking, and cybersecurity clauses, including Safeguarding Covered Defense Information and NIST SP 800-171 requirements. Transportation by sea must involve U.S.-flag vessels unless a waiver is granted, and the contractor must provide unique entity identifiers and certify socioeconomic status if claiming small business designation. The contract references the DLA Master List of Technical and Quality Requirements as authoritative for all incorporated technical and quality standards, and all documents are procured through DIBBS with proposals due by July 27, 2026.
FLUID HANDLING DIVISION

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 114119
New
DIBBS
BLADDER, ACCUMULATORThe contract is for the procurement of one bladder accumulator with NSN 2090-01-692-7753 and part number BA05B3U01P2, issued under solicitation SPE7M0-26-T-009Z by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days to the USS Carl Vinson CVN 70 at FPO AP 96629, with FOB destination terms, zero variance allowed in quantity, and inspection and acceptance occurring at the delivery point. The item must comply with MIL-STD-2073-1E packaging standards, be marked per MIL-STD-129, and be palletized in accordance with DLA packaging requirements. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specifications. Shipping must be via the fastest traceable means, with parcel post explicitly forbidden. The supplier must use the VSM system and adhere to all transportation directives including DLAD PROC NOTES C19 and C20. The required delivery date is July 9, 2026, and the contract mandates adherence to technical and quality requirements referenced in the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 114119
DIBBS
PLATE, MOUNTINGThis contract is for the procurement of 35 mounting plates identified by NSN 2040-01-716-3560 under solicitation SPE7M4-26-T-261P, with a required delivery date of February 13, 2027, and a delivery window of 200 days. The item is restricted source and requires engineering source approval from the government design control activity. Strict compliance is mandated with the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951 and MIL-STD-129 for packaging and marking. Packaging must adhere to DLA Packaging Requirements and palletization standards, while prohibiting the intentional use of ozone-depleting substances unless explicit written approval from the contracting officer is obtained. Mercury or mercury-containing compounds are banned from direct contact with the item except in specified applications such as batteries, fluorescent lights, instrumentation, or chemical reagents as authorized by NAVSEA, and any portable devices containing mercury must include shock-proof construction and a secondary containment layer per NAVSEA 5100-003D. The item must be delivered FOB origin to the designated receiving warehouse in Tracy, California, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all shipments must follow DLA transportation protocols. Contractual obligations include configuration change management through formal engineering change proposals and adherence to all applicable regulatory and environmental restrictions.
FLUID HANDLING DIVISION

POSTED

8 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

NAICS: 331318
New
Federal
61--WIRE,ELECTRICAL
Other Aluminum Rolling, Drawing, and Extruding

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334419
New
Federal
Switch Assembly
Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336330
New
Federal
25--PITMAN ARM,STEERING
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
Federal
15--COUPLING ASSY,BLEED
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
Federal
48--TAILPEACE,BALL VALV
Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
Federal
47--PLUG,AIRCRAFT FUEL TAN
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
Federal
48--VALVE,THROTTLE
Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
Federal
53--HOLDER,SPRING
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
Federal
25--TREAD,METALLIC,NONSKID
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332912
New
Federal
48--PARTS KIT,PRESSURE
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
Federal
25--CLAMP,TOW BAR
Other Motor Vehicle Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
Federal
59--SWITCH,PRESSURE
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details