Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

230kV Switch Installation and Commissioning

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Defense, managed by W071 Endist Omaha, involves the removal and installation of 230kV transmission tie line disconnect switches at the USACE Big Bend Dam. The scope of work includes removing legacy equipment from the powerhouse structure and dam tailrace, followed by the installation of five motor operated circuit switchers, two load rated disconnects, and six grounding switches. The project requires the integration of this equipment with 230kV generator step-up transformers using heavy lifting equipment to ensure a fully operational 230kV switch connection. The solicitation was posted on September 14, 2026, with a response deadline of October 5, 2026, falling under NAICS code 238210.

General Info

DoD subcontract for 230kV transmission switch removal and installation at Big Bend Dam.

Agency

Department Of Defense → W071 Endist OmahaView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

NE, 57339

Set-Aside

NONE

Documents

This scope was carved out of W9128F26SC003.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Big Bend 230kV Tie-Line Switch Replacement

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W071 Endist Omaha
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → W071 Endist Omaha
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs removal and installation of 230kV transmission tie line disconnect switches for prime contractors on USACE Big Bend Dam projects. Removes legacy equipment from powerhouse structure and dam tailrace; installs five motor operated circuit switchers, two load rated disconnects, and six grounding switches. Integrates equipment with 230kV generator step-up transformers using heavy lifting equipment. Delivers a fully operational 230kV switch connection.

Similar Contracts

Same NAICS industry code

NAICS: 238210
New
SLED
Existing Generators Replacement Aguadilla, PR
Solicitation # 872298
This project involves the complete replacement of two existing power generators at the Aguadilla Detention Facility in Aguadilla, Puerto Rico. The scope of work requires the installation of one 100 kW and one 150 kW Perkins diesel generator, both featuring stainless-steel enclosures to protect against salt air and moisture. The installation includes two new NEMA 3R automatic transfer switches with rust-resistant enclosures, secure anchoring using galvanized Grade 5 or higher bolts, and comprehensive load bank testing. The project is being awarded as a Firm-Fixed-Price task order under an 8(a) Multiple Award Construction Contract (MACC) IDIQ, with an estimated magnitude between $250,000 and $300,000. The period of performance is 270 calendar days from the Notice to Proceed, with a requirement to submit a project schedule within 15 days of that notice. Work must be performed during regular business hours, Monday through Friday, from 7:30 am to 4:00 pm. The contract is subject to Davis-Bacon prevailing wage rates per determination PR20260001 and requires compliance with the Buy American Act. Award decisions will be based solely on the lowest total evaluated price, provided the offeror demonstrates technical understanding, a sound implementation approach, and a robust quality control and safety program. Administrative requirements include electronic invoicing via the Invoice Processing Platform, the provision of performance and payment bonds, and strict security protocols, including PIV card issuance and non-disclosure agreements for personnel.
Bristol Alliance of Companies

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 238210
New
SLED
Conex Offices for Forensics Personnel - St. Thomas
Solicitation # 872300
This solicitation is for a Firm-Fixed-Price task order to provide and install two 40ft by 8ft high-security steel conex offices for forensic personnel in St. Thomas, US Virgin Islands. The project includes the installation of reinforced concrete slabs, electrical connections, HVAC systems, vinyl flooring, and security features such as Cypher locks and security windows. The estimated contract value is between $250,000 and $300,000, with a period of performance of 364 calendar days from the Notice to Proceed. This is an 8(a) set-aside solicitation under the Multiple Award Construction Contract (MACC) for the Bristol Alliance of Companies on behalf of Immigration and Customs Enforcement (ICE). Award will be based on the lowest total evaluated price, though proposals will be evaluated on technical approach, safety and quality control plans, and price. Key requirements include a mandatory site survey prior to proposal submission, adherence to the Buy America Act, and compliance with union prevailing wage rates per determination VI20260001. Contractors must follow strict security protocols, including signing non-disclosure agreements and obtaining PIV cards for personnel. All payment requests must be submitted electronically via the Invoice Processing Platform and accompanied by certified payroll. Proposals are due by September 29, 2026.
Bristol Alliance of Companies

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 238210
New
IE JCC Fire Alarm Repairs
Solicitation # Inland Empire Fire Alarm Deficiencies (169706,169708,169733,169736 & 16937)
Management & Training Corporation (MTC) is soliciting subcontractor bids for a fixed-price, single lump sum contract to correct fire alarm deficiencies at the Inland Empire Job Corps Center in San Bernardino, California. The scope of work includes the installation of manual pull stations, horn/strobe notification appliances, and the replacement of six existing fire alarm bells with new horn/strobe units. All new devices must be integrated into the existing system and undergo complete functional testing. The project must be completed within 90 consecutive business days following a written Notice to Proceed, with an estimated price range between 0 and 25,000 dollars. This opportunity is set aside for small businesses and various socioeconomic categories, including SDB, WOSB, HUBZone, and SDVOSB. Award decisions will be based on overall best value. Requirements include adherence to California prevailing wage determinations and Construction Wage Rate Requirements, with weekly certified payroll submissions. Contractors must provide a Certificate of Insurance and, for bids 25,000 dollars or more, a 20 percent bid bond and subsequent performance and payment bonds from an A-rated surety. Submission requirements include the MTC Supplier Packet, a W-9, and a Unique Entity ID. Final acceptance is contingent upon a two-stage inspection process consisting of a substantial completion punch list and a final inspection.
Inland Empire Job Corps

POSTED

about 9 hours ago

DEADLINE

in 2 days
View Details
NAICS: 238210
New
SLED
DMU Onboard Camera System Upgrade
Solicitation # OP-PS-26-001
The Sonoma-Marin Area Rail Transit District (SMART) is soliciting proposals under solicitation number OP-PS-26-001 for the design, integration, and support of a modernized onboard image and audio recording system for eighteen Diesel Multiple Units (DMUs). The project aims to ensure compliance with FRA 49 CFR § 229.136 and requires comprehensive recording capabilities, including outward-facing cameras in both cabs, inward-facing cab coverage with infrared capability and a minimum frame rate of 5 frames per second, and unobstructed coverage of all passenger areas. The system must integrate with existing onboard subsystems such as the Monitoring and Diagnostic System, Communication Control Unit, and Passenger Information/Emergency Intercom Systems. Final acceptance of the full fleet is targeted for completion on or before October 12, 2027. The contract will be awarded based on the best value, utilizing a qualitative rating system from 0 to 5 across various evaluation factors. Proposers must provide milestone-based pricing, including a final acceptance fee of at least 15 percent of the total sum. Technical requirements include adherence to NFPA 130, ONVIF Profile S and G, and UL 2900-2-3 Level 3 cybersecurity controls, with a prohibition on hardcoded default passwords. Contractors must maintain specific insurance coverages, including Commercial General Liability of at least 2 million dollars per occurrence with a Railroads CG 24 17 endorsement. Proposals are due by October 15, 2026, via the Euna Procurement portal.
Sonoma-Marin Area Rail Transit District (SMART)

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → W071 Endist Omaha

Same awarding agency

NAICS: 811310
New
Federal
Barge #600 Hydraulic Lines Replacement for Missouri River Project Office (MRPO)
Solicitation # W9128F26QA097
Solicitation W9128F26QA097 is a firm-fixed-price request for proposals issued by the Department of Defense for the maintenance overhaul and replacement of the high-pressure hydraulic piping system on Equipment Barge #600. Located at the Missouri River Project Office in Omaha, Nebraska, the project requires the removal and replacement of both flexible lines inside the hull and rigid steel lines housed above deck. The scope of work includes draining and disposing of hydraulic fluid, furnishing new materials—specifically Schedule 160 seamless steel pipe and SAE 100R12 flexible lines—performing pressure testing at 3000 psi, and conducting necessary structural repairs such as cutting and patching access holes with ASTM A36 carbon structural steel. The period of performance is scheduled from November 15, 2026, through March 15, 2027. This is a total small business set-aside, and the government will award the contract to the offeror providing the best value, considering both price and past performance. Offerors must demonstrate experience by providing up to three projects of similar magnitude completed within the last five years. Due to the nature of the work, the contractor must adhere to strict safety protocols for permit-required confined spaces, complying with EM 385-1-1 and OSHA standards, and must maintain independent on-site rescue procedures. Key submittals required before work begins include a site-specific health and safety plan, a work plan, material certifications, and proof of insurance. Proposals must be submitted electronically to Grant Hibbs no later than September 18, 2026, at 2:00 PM local time. A site visit is scheduled for September 11, 2026, requiring RSVP and specific confined space documentation for barge access.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 237130
New
Federal
Big Bend 230kV Tie-Line Switch Replacement
Solicitation # W9128F26SC003
The U.S. Army Corps of Engineers Omaha District is conducting market research via a Sources Sought notice for the 230 kV Tie-Line Switch Replacement at the Big Bend Powerhouse in Fort Thompson, South Dakota. The project involves replacing disconnect switches that connect the Big Bend Power Plant to two 230kV transmission tie lines, with equipment located on the powerhouse structure and the dam tailrace. The scope of work includes the procurement and installation of five motor operated circuit switchers, two load rated operated disconnects, six grounding switches, and all associated equipment required to return the 230kV switch connection to service. Existing equipment ratings are 242kV with a 900kV BIL and ampacities between 1,200A and 2,000A. The government intends to issue a Total Small Business Set-Aside as a single Firm Fixed Price contract under NAICS code 237130. The estimated construction magnitude is between 1,000,000 and 5,000,000 dollars. Interested firms must be registered in the System for Award Management and are requested to submit their capabilities and experience by October 5, 2026, at 2pm Central. Specifically, the government is looking for firms with verifiable experience in government installation projects valued between 1 million and 10 million dollars within the last five years, as well as expertise in the procurement and installation of 230kV transmission tie line disconnect switches. Small businesses are reminded that per FAR 52.219-14(e)(1), at least 25 percent of the cost of contract performance for personnel must be expended for employees of the concern.
Power and Communication Line and Related Structures Construction

POSTED

about 13 hours ago

DEADLINE

in 21 days
View Details
NAICS: 237130
New
Federal
SOURCES SOUGHT ANNOUNCEMENT / INDUSTRY DAY FOR SENTINEL UTILITY CORRIDOR AT MALMSTROM AIR FORCE BASE, MONTANA
Solicitation # W9128F26SM024
The U.S. Army Corps of Engineers Omaha District is conducting market research via Sources Sought Announcement W9128F26SM024 for the Sentinel Utility Corridor project at Malmstrom Air Force Base, Montana. This effort supports the Ground Based Strategic Deterrent program by replacing the existing Hardened Intersite Cable System with approximately 1,750 to 2,225 miles of new utility and communications infrastructure. The project scope includes the installation of microducts, manholes, and handholes at a minimum depth of 6 feet, as well as complex crossings of railways, rivers, and roadways. The estimated magnitude of the project is between $1.4 billion and $2.0 billion, with incremental funding expected from FY29 through FY33 and a projected completion around 2035. The government intends to utilize a Progressive Design-Build (PDB) approach under Other Transaction Authority (OTA) per 10 U.S.C. § 2808a, emphasizing commercial agility and shared risk. Selection will be based on a Qualifications Based Selection (QBS) process, focusing on team composition, past relevant experience, and innovative problem-solving abilities rather than price. Interested firms under NAICS 237130 are requested to submit an industry questionnaire and a capability statement of no more than 12 pages by September 24, 2026. Contractors must comply with Davis-Bacon labor laws, OSHA and EM 385-1-1 safety standards, and ensure the active Minuteman III ICBM system remains operational throughout the execution of the work.
Power and Communication Line and Related Structures Construction

POSTED

1 day ago

DEADLINE

in 10 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS