Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Heavy Equipment Rigging and Transport

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the transport and rigging of heavy switchgear for prime contractors working on USACE Big Bend Dam projects. The scope of work includes hauling oversized electrical components to Fort Thompson, South Dakota, and utilizing specialized rigging gear and heavy-duty cranes to hoist equipment onto the dam tailrace and powerhouse structure. The contractor is responsible for delivering all equipment directly to the designated installation points. The project is managed under the Department of Defense via the W071 Endist Omaha agency. To ensure operational safety and compliance, the contractor must provide certified rigging operators and strictly adhere to all USACE site access and safety requirements. The opportunity was posted on September 14, 2026, with a response deadline of October 5, 2026, falling under NAICS code 484220.

General Info

Transport and rigging of heavy switchgear for USACE Big Bend Dam projects.

Agency

Department Of Defense → W071 Endist OmahaView Agency

NAICS

484220 - Specialized Freight (except Used Goods) Trucking, LocalView NAICS

Place of Performance

NE, 57339

Set-Aside

NONE

Documents

This scope was carved out of W9128F26SC003.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Big Bend 230kV Tie-Line Switch Replacement

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W071 Endist Omaha
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → W071 Endist Omaha
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs transport and rigging of heavy switchgear for prime contractors on USACE Big Bend Dam projects. Hauls oversized electrical components to Fort Thompson, SD, and utilizes heavy-duty cranes and specialized rigging gear to hoist equipment onto the powerhouse structure and dam tailrace. Requires certified rigging operators and adherence to USACE safety and site access requirements. Delivers equipment to the installation point.

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → W071 Endist Omaha

Same awarding agency

NAICS: 811310
New
Federal
Barge #600 Hydraulic Lines Replacement for Missouri River Project Office (MRPO)
Solicitation # W9128F26QA097
Solicitation W9128F26QA097 is a firm-fixed-price request for proposals issued by the Department of Defense for the maintenance overhaul and replacement of the high-pressure hydraulic piping system on Equipment Barge #600. Located at the Missouri River Project Office in Omaha, Nebraska, the project requires the removal and replacement of both flexible lines inside the hull and rigid steel lines housed above deck. The scope of work includes draining and disposing of hydraulic fluid, furnishing new materials—specifically Schedule 160 seamless steel pipe and SAE 100R12 flexible lines—performing pressure testing at 3000 psi, and conducting necessary structural repairs such as cutting and patching access holes with ASTM A36 carbon structural steel. The period of performance is scheduled from November 15, 2026, through March 15, 2027. This is a total small business set-aside, and the government will award the contract to the offeror providing the best value, considering both price and past performance. Offerors must demonstrate experience by providing up to three projects of similar magnitude completed within the last five years. Due to the nature of the work, the contractor must adhere to strict safety protocols for permit-required confined spaces, complying with EM 385-1-1 and OSHA standards, and must maintain independent on-site rescue procedures. Key submittals required before work begins include a site-specific health and safety plan, a work plan, material certifications, and proof of insurance. Proposals must be submitted electronically to Grant Hibbs no later than September 18, 2026, at 2:00 PM local time. A site visit is scheduled for September 11, 2026, requiring RSVP and specific confined space documentation for barge access.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 12 hours ago

DEADLINE

in 4 days
View Details
NAICS: 237130
New
Federal
Big Bend 230kV Tie-Line Switch Replacement
Solicitation # W9128F26SC003
The U.S. Army Corps of Engineers Omaha District is conducting market research via a Sources Sought notice for the 230 kV Tie-Line Switch Replacement at the Big Bend Powerhouse in Fort Thompson, South Dakota. The project involves replacing disconnect switches that connect the Big Bend Power Plant to two 230kV transmission tie lines, with equipment located on the powerhouse structure and the dam tailrace. The scope of work includes the procurement and installation of five motor operated circuit switchers, two load rated operated disconnects, six grounding switches, and all associated equipment required to return the 230kV switch connection to service. Existing equipment ratings are 242kV with a 900kV BIL and ampacities between 1,200A and 2,000A. The government intends to issue a Total Small Business Set-Aside as a single Firm Fixed Price contract under NAICS code 237130. The estimated construction magnitude is between 1,000,000 and 5,000,000 dollars. Interested firms must be registered in the System for Award Management and are requested to submit their capabilities and experience by October 5, 2026, at 2pm Central. Specifically, the government is looking for firms with verifiable experience in government installation projects valued between 1 million and 10 million dollars within the last five years, as well as expertise in the procurement and installation of 230kV transmission tie line disconnect switches. Small businesses are reminded that per FAR 52.219-14(e)(1), at least 25 percent of the cost of contract performance for personnel must be expended for employees of the concern.
Power and Communication Line and Related Structures Construction

POSTED

about 12 hours ago

DEADLINE

in 21 days
View Details
NAICS: 237130
New
Federal
SOURCES SOUGHT ANNOUNCEMENT / INDUSTRY DAY FOR SENTINEL UTILITY CORRIDOR AT MALMSTROM AIR FORCE BASE, MONTANA
Solicitation # W9128F26SM024
The U.S. Army Corps of Engineers Omaha District is conducting market research via Sources Sought Announcement W9128F26SM024 for the Sentinel Utility Corridor project at Malmstrom Air Force Base, Montana. This effort supports the Ground Based Strategic Deterrent program by replacing the existing Hardened Intersite Cable System with approximately 1,750 to 2,225 miles of new utility and communications infrastructure. The project scope includes the installation of microducts, manholes, and handholes at a minimum depth of 6 feet, as well as complex crossings of railways, rivers, and roadways. The estimated magnitude of the project is between $1.4 billion and $2.0 billion, with incremental funding expected from FY29 through FY33 and a projected completion around 2035. The government intends to utilize a Progressive Design-Build (PDB) approach under Other Transaction Authority (OTA) per 10 U.S.C. § 2808a, emphasizing commercial agility and shared risk. Selection will be based on a Qualifications Based Selection (QBS) process, focusing on team composition, past relevant experience, and innovative problem-solving abilities rather than price. Interested firms under NAICS 237130 are requested to submit an industry questionnaire and a capability statement of no more than 12 pages by September 24, 2026. Contractors must comply with Davis-Bacon labor laws, OSHA and EM 385-1-1 safety standards, and ensure the active Minuteman III ICBM system remains operational throughout the execution of the work.
Power and Communication Line and Related Structures Construction

POSTED

1 day ago

DEADLINE

in 10 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS