Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

25--Notice of Intent to Award W91CRB-09-P-0084 to Armorstruxx, LLC, 500 S. Beckman Road, Lodi, CA 95240

Active
W91CRB-09-P-0084Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Army Research and Development Command at Aberdeen Proving Ground, Maryland plans to negotiate exclusively with Armorstruxx, LLC for the supply of approximately 250 armor plates. These plates are constructed from a proprietary combination of aramid fiber and polyolefin matrix materials, using a unique molding process that has been tested and validated by the Army Research Lab. Due to the specialized nature of this material and the proprietary manufacturing process, no other source is known to provide this specific system, justifying the sole-source procurement approach. The procurement falls under the North American Industry Classification System code 325211, with a size standard of 750 employees. Interested parties may submit their interest in writing by April 9, 2009, though this notice is not a solicitation for competitive proposals and no formal statement of work is provided. The contract specialist managing this action is Jeff Schoerner, who can be contacted via email for further information. The contract opportunity was publicly posted, but negotiations will be exclusively with Armorstruxx, reflecting the unique qualifications and proprietary capabilities required for this procurement.

General Info

U.S. Army to sole-source negotiate with Armorstruxx for 250 proprietary armor plates.

NAICS

325211 - Plastics Material and Resin Manufacturing

Place of Performance

MD

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Apg
ContactsNo contacts available
OfficeABERDEEN PROVING GROU, MD, 21005-5001, USA
Office AddressABERDEEN PROVING GROU, MD, 21005-5001, USA
ContactsNo contact information available

Full Description

Show more
The U.S. Army Research and Development Command (RDECOM), Aberdeen Proving Ground, MD intends to negotiate solely (as prescribed in FAR 6.302-1) with Armorstruxx,LLC. The contractor shall provide armor plates molded from aramid fiber, polyolefin matrix materials. The Army Research Lab (ARL) has tested this particular brand of aramid reinforced laminate and needs to evaluate more of the same material. This material involves a unique combination of fiber and resin, with a proprietary molding process. No other source of this specific system is known. ARL is in need of approximately 250 plates. The North American Industry Classification System (NAICS) for this requirement is 325211 and the size standard is 750 employees. Interested persons may identify their interest, in writing, to the Government point of contact below. Responses to this notice must be received no later than 12:00 noon, Eastern Daylight Time, April 9th, 2009. This notice of intent is not a request for competitive proposals or a solicitation of offers. No Statement of Work will be provided. The point of contact for this action is Jeff Schoerner, Contract Specialist, email: contact@example.gov.

Similar Contracts

Same NAICS industry code

NAICS: 325211
New
DIBBS
PLASTIC STRIP, PRESSURE
Solicitation # SPE8E9-27-T-0382
Solicitation SPE8E9-27-T-0382 is a Request for Quotations issued by the DLA Troop Support Construction and Equipment MRO Service I for the procurement of 33 rolls of gray pressure sensitive adhesive plastic strip, identified by NSN 9330-01-288-3083. Each roll contains 36 yards of material with a width of 3 inches and a thickness of 0.014 inches, featuring a liner score slit at 1 inch intervals parallel to the length of the tape. The item is classified as a commercial product, and the delivery is required within 67 days after receipt of order, with a need ship date of October 15, 2026, and a final delivery location at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract is a total small business set-aside under FAR 19.5 and requires compliance with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and cyber incident reporting. Packaging must adhere to RP001 and MIL-STD-129, with specific requirements for hazardous materials per FED-STD-313 and TQ requirement IP025. Inspection and acceptance will occur at the destination per FAR 52.246-1. Invoicing and payment must be processed electronically through the Wide Area Workflow system. Offerors must be registered in SAM.gov and provide their Unique Entity Identifier and CAGE code with their submission.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → W6QK Acc-Apg

Same awarding agency

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS