Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WHEEL ASSEMBLY, PNEU

Active
SPE7LX-26-U-9504Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 123 units of a pneumatic wheel assembly identified by NSN 2530-01-650-9611 and part number 03018 manufactured by TRU-HITCH, INC. Deliveries are due within 73 days of contract award, with shipment FOB origin and final inspection and acceptance occurring at the destination. The quantity is firm with no variance allowed, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 for marking, while preservation follows MIL-DTL-4M for non-airplane tires. Palletization is required if total shipment weight exceeds 125 lbs, per MIL-HDBK-774. All packaging and preservation methods must adhere to DLA’s specific requirements, including the use of special marking code ZZ indicating 32-type I shelf-life lot markings as mandated by the specification. The item carries a non-extendable shelf life of 72 months as defined by RS001 and RS024. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. This procurement falls under a total small business set-aside with NAICS code 336330, issued by the Department of Defense’s Strategic Acquisition Program Directorate, and is subject to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The solicitation was posted on August 10, 2026, with a response deadline of August 25, 2026, and contract performance is limited to the contiguous United States under DLA direct coverage.

General Info

123 pneumatic wheel assemblies under NSN 2530016509611; small business set-aside; $350K cap or one year.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

336330 - Motor Vehicle Steering and Suspension Components (except Spring) ManufacturingView NAICS

Place of Performance

USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUSA
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WHEEL ASSEMBLY,PNEU
WHEEL,PNEUMATIC TIR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RS024: Shelf-life requirement RS001 for a TYPE I (CODE I) item with a shelf life of 72 months (non-extendable) applies to this item.
TRU-HITCH, INC. 1BZD4 P/N 03018
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000239530 0001 EA 123.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:2530016509611
DELIVERY (IN DAYS):0073
SPE7LX-26-U-9504
SECTION B
PR: 1000239530 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:FG OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION METHOD = ZZ: PRESERVATION, PACKAGING, AND PACKING SHALL BE IN ACCORDANCE WITH MIL-DTL-4M FOR NON-AIRPLANE TIRES.
Unskidded, boxed tires or tubes being shipped to a single destination and exceeding a total weight of 125 lbs should be palletized in accordance with MIL-HDBK-774.
ZZ = SPECIAL MARKING REQUIREMENTS: 32 TYPE I, SHELF LIFE LOT MARKINGS REQUIRED PER SPECIFICATION

SPE7LX-26-U-9504 NSN/Part Number: 2530-01-650-9611 Quantity: 123 EA Purchase Request: 1000239530QTY: 123 Delivery: 73 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336330
New
Federal
SHOCKS SKID PLATESThe contract opportunity involves the procurement of shocks skid plates and is designated as a small business total set-aside under NAICS code 336330. It is forecasted by the Department of Justice, specifically through the Inc Federal Prison Industries. The place of performance for this contract is Jamul, California. The solicitation does not yet have a specific number assigned, and it was posted on May 25, 2026. The primary contact for this contract is Robert L. Connolly, who serves both as the point of contact and the small business specialist for this opportunity. Interested parties can reach him via the provided email address. This contract is intended to support small businesses, emphasizing the emphasis on set-aside programs to promote participation from smaller entities in federal procurement. Further details and updates about the contract can be accessed through the Department of Justice’s forecasting portal.
Inc Federal Prison Industries

POSTED

about 12 hours ago

DEADLINE

N/A
View Details
NAICS: 336330
New
DIBBS
LINK, TRACK SHOE, CON
Solicitation # SPE7LX-26-U-9510
This contract is for the procurement of 9,601 track shoes for combat vehicles under solicitation SPE7LX-26-U-9510, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The item, identified by NSN 2530-01-629-8669, is to be manufactured using a forging process, with tooling and sourcing details requiring coordination with DLA’s Aviation or Land & Maritime Supply Chains teams. All deliveries must comply with stringent quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no variance allowed in quantity. Inspection and acceptance occur at the origin, and delivery is FOB origin within 195 days. The contract prohibits use of Class I ozone-depleting chemicals and mandates CMMC Level 2 cybersecurity self-assessment compliance, with Covered Defense Information protections enforced. Packaging and shipping must adhere to DLA’s packaging requirements and hazardous materials protocols. The solicitation is set aside for Women-Owned Small Businesses with NAICS code 336330, and responses are due by August 25, 2026. The unit price is $9,601 per each, with total estimated value reflecting the full quantity.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336330
New
Federal
25--PARTS KIT,BALL JOINT
Solicitation # SPE7LX26U9493
The solicitation seeks quotes for a Parts Kit, Ball Joint with NSN 2530015406069, under a Small Business Set Aside, with a guaranteed minimum order of five units and an initial requirement of 36 units to be delivered within 18 days of award. The contract, if awarded, may take the form of an Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, with an estimated two orders per year. Shipments will be distributed to multiple Department of Defense Logistics Agency depots across the continental United States and overseas via consolidated containerization points. Only the approved source, 78710 7-45819-1, is eligible for consideration. The solicitation is issued as an RFQ via SAM.gov, with no hard copies available and no technical specifications, plans, or drawings provided. All responsible small business concerns may submit electronic quotes by the deadline of August 25, 2026, and responses must be received electronically through the designated portal. The contracting activity is managed by DLA Land and Maritime out of Columbus, Ohio, and inquiries must be directed via email to the designated point of contact.
DLA Land And Maritime

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336330
New
Federal
25--ACTUATOR ASSEMBLY,PARK
Solicitation # SPE7LX26U9525
The solicitation seeks a single actuator assembly, NSN 2530017077928, with a requested quantity of 13 units, to be delivered within 73 days of award under an Automated Indefinite Delivery Contract that may extend for one year or until aggregate orders reach $350,000, whichever comes first. The guaranteed minimum order is one unit, with an estimated two orders per year anticipated. Deliveries will be distributed to multiple Defense Logistics Agency depots within the continental United States and overseas, using consolidated and containerized shipping methods. This is a source-controlled item requiring procurement exclusively from the approved source 064H2 402-5402, and all supplied units must strictly comply with the specified drawing requirements. Digitized technical documents can be accessed electronically, and hard copies of the solicitation are not provided. Quotes must be submitted electronically via the provided SAM.gov link by the deadline of August 25, 2026, and all responsible suppliers are invited to respond, with no set-aside restrictions applied. Inquiries should be directed to the designated buyer email listed in the solicitation document.
DLA Land And Maritime

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336330
New
Federal
FPI UNICOR BASTROP SKID PLATES
Solicitation # CW26-217BA
Federal Prison Industries, Bastrop, under the Department of Justice, is issuing a small business set-aside solicitation for vehicle component requirements, specifically skid plates, under NAICS code 336330. This combined synopsis and solicitation, identified as CW26-217BA, is conducted under Simplified Acquisition Procedures and will result in a single award based on best value, considering price, technical acceptability, delivery performance, and past performance. All deliveries must be completed by the specified date after award and sent to the designated location at 1341 Hwy. 95 N., Bastrop, TX 78602. Quotes must be submitted electronically by the deadline of August 17, 2026, and only through written communication to the designated point of contact, Chelsea Walker, at Chelsea.walker3@usdoj.gov; no telephone inquiries will be accepted under any circumstances. The government may make single or multiple awards based on best value and will issue payment via purchase card or SF-1449 purchase order. Interested small businesses are responsible for regularly monitoring the solicitation site for any amendments or updates. Faith-based and community-based organizations are eligible to submit quotes equally with other entities.
Inc Federal Prison Industries

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336330
New
DIBBS
Horn Button and Switch Assembly Integration
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336330
New
DIBBS
Vehicle Horn Button Component Manufacturing
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336330
New
DIBBS
Ball Joint Parts Kit Manufacturing and AssemblyThe contract requires the manufacture, assembly, packaging, and labeling of a complete ball joint parts kit in full alignment with U.S. military standards, with delivery required FOB origin no later than 75 days after receipt of the order. Compliance with MIL-STD-129 for military markings, MIL-STD-2073-1E for packaging and preservation, and hazard communication labeling regulations is mandatory to ensure proper identification, handling, and safety of the components throughout the supply chain. The work is classified under NAICS code 336330, indicating the nature of the project as parts and accessories for motor vehicles and related defense systems, and the contract is structured as a subcontract under the Department of Defense's LSO Combat Vehicles and Armament division, with a response deadline of August 24, 2026.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 336330
New
DIBBS
TORQUE ROD, TANDEM A
Solicitation # SPE7L3-26-T-170J
The contract pertains to the procurement of 43 units of TORQUE ROD, TANDEM A, identified by NSN 2530016789207, under solicitation SPE7L3-26-T-170J, with a scheduled delivery 165 days after order placement, targeting an original delivery date of May 11, 2027. Delivery is FOB Origin to the DLA Distribution Red River facility in Texarkana, Texas, with inspection and acceptance occurring at the destination. The unit price is $43.00 per unit, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E and DLA Packaging Requirements, requiring each torque rod to be individually preserved using ZZ USE (Code 89) preservative material to prevent corrosion, with all moving parts properly lubricated, unless exceptions apply due to potential damage, removal difficulty, or incompatibility with operational fluids. Each item must be cushioned by weather-resistant fiberboard die-cuts designed to immobilize the part, with one die-cut featuring a center hole for protrusions and sized flush to the rod’s height to ensure even weight distribution and prevent shifting. Marking must adhere to MIL-STD-129, including LOGMIL barcodes on all container levels, with no special marking required. Ozone-depleting chemicals are strictly prohibited, and substitute chemicals require approval unless explicitly authorized. The contractor must submit Safety Data Sheets for any hazardous materials and comply with the Hazard Communication Standard. The solicitation is subject to FAR and DFARS clauses governing contracts, including employment equity, trafficking in persons, subcontracting, and cyber security requirements under NIST SP 800-171. Invoicing must be submitted via WAWF, and payment terms are processed through the designated DoDAAC. Offerors must provide accurate representations in SAM.gov regarding small business status, UEI, and CAGE code if applicable, and comply with all socioeconomic, cybersecurity, and reporting obligations. The basis of award is presumed to be Lowest Price Technically Acceptable, with technical acceptability determined by adherence to all referenced standards and requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336330
New
DIBBS
PARTS KIT, BALL JOINT
Solicitation # SPE7L4-26-U-1080
This solicitation, numbered SPE7L4-26-U-1080, seeks the procurement of a Parts Kit, Ball Joint, identified by NSN 2530016685704 and OSHKOSH DEFENSE LLC part number 4364830, under an Indefinite Delivery Contract (IDC) for a one-year period below the Simplified Acquisition Threshold, with an estimated annual quantity of 12 KITs and a maximum contract value of $350,000. Delivery is required FOB Origin within 75 days after order placement, and all items must be supplied in new, unused condition—no used, reconditioned, remanufactured, or former government surplus items are acceptable. The unit of issue is KT (Kit), with zero variance allowed on quantity, and inspection and acceptance occur at the destination point. Packaging and preservation must comply with MIL-STD-2073-1E, specifically Appendix D for kits, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Marking requirements follow MIL-STD-129, with special marking code ZZ-ZZ indicating unique requirements, including proper labeling for any radioactive materials exceeding specified activity thresholds. All technical and quality standards are referenced through R or I numbers from the DLA Master List of Technical and Quality Requirements accessible via the DLA website. The contract mandates strict adherence to cybersecurity and information safeguarding clauses including DFARS 252.204-7012 and NIST SP 800-171 DOD Assessment Requirements with approved deviation 2026-O0025, and prohibits use of covered defense telecommunications equipment under DFARS 252.204-7018. Hazardous materials must be labeled per the Hazard Communication Standard unless exempt by other federal statutes, requiring submission of labels and MSDS before award. Electronic invoicing via WAWF is required, and payment instructions are tied to the resulting award's DoDAAC. The Government reserves the right to award based on price and other factors, potentially applying a HUBZone preference. Offerors must maintain current representations in SAM, confirm small business status, and certify compliance with whistleblower protections, export controls, and prohibitions on mandatory arbitration. Responses must be submitted via DIBBS by August 24, 2026, and only those with a minimum
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 336330
New
DIBBS
PUMP ASSEMBLY, POWER
Solicitation # SPE7L3-26-T-168P
This contract solicits one unit of a Power Pump Assembly identified by NSN 2530016987978 and part number FORD MOTOR CRAFT 01637 P/N LC3Z-3A674-B, with delivery required within 20 days of order placement to the Navy Expeditionary Logistics Support Group in Williamsburg, Virginia. The delivery term is FOB Origin, with inspection and acceptance occurring at the destination, and the quantity is fixed with zero variance allowed. Packaging must strictly adhere to MIL-STD-2073-1E, including specified methods for preservation, wrapping, cushioning, and containerization, while labeling and marking follow MIL-STD-129 without any special marking codes. Palletization must comply with DLA Packaging Requirements for Procurement (RP001), and hazardous materials must be labeled per the Hazard Communication Standard. The use of Class I ozone depleting chemicals is prohibited, and all technical and quality requirements referenced by R or I numbers must be met as defined in the DLA Master List of Technical and Quality Requirements. The contract incorporates numerous Federal Acquisition Regulation clauses covering cybersecurity, such as safeguarding covered defense information and NIST SP 800-171 assessment requirements, prohibitions on covered telecommunications equipment, whistleblower protections, and restrictions on mandatory arbitration. The Buy American Act and Berry Amendment apply with a reduced threshold of $150,000, and offerors must certify compliance with domestic content requirements. Cybersecurity obligations include compliance with DFARS 252.240-7997 and FAR 52.223-3 for hazardous material identification. Submission must occur via the DIBBS system before the closing date of August 20, 2026, and contractors must be registered in DLA’s Account Management & Provisioning System to access the Vendor Shipment Module. Additive manufacturing is prohibited unless explicitly authorized, and failure to comply results in automatic disqualification. Payment must be processed electronically through Wide Area Workflow, and all representations in the System for Award Management must be current. The contractor is also subject to clauses prohibiting the use of hexavalent chromium, requiring employment eligibility verification, combating trafficking in persons, and ensuring equal opportunity for workers with disabilities.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336330
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L3-26-T-168X
The contract involves the procurement of a horn button and switch assembly for vehicle use, identified by NSN 0001S00000053, with a quantity of 870 AY to be delivered to New Cumberland, PA under FOB Origin terms. The item is governed by stringent technical and quality requirements referenced from the DLA Master List, including inspection and acceptance at origin, compliance with MIL-STD-2073-1E for packaging and preservation, and MIL-STD-129 for marking and barcoding, with specific restrictions on labeling export-controlled technical data, requiring omission of nomenclature from shipping containers. Technical data associated with the item is subject to ITAR or EAR export controls, necessitating prior authorization for disclosure to foreign persons and compliance with DFARS 252.225-7048, restricted only to contractors with approved JCP certification and completed DLA training. The contract mandates adherence to ISO 9001:2015 for quality management, First Article Testing of three units, and zero non-conformance acceptance unless otherwise specified, with cybersecurity requirements including CMMC Level 2 certification for third-party assessors and compliance with NIST SP 800-171 and safeguarding of covered defense information per FAR/DFARS clauses. The solicitation is a total small business set-aside under NAICS 336330, with electronic submissions required via DIBBS by August 20, 2026, and payment processed exclusively through WAWF, while prohibiting the use of covered telecommunications equipment and enforcing whistleblower protections, employment eligibility verification, and sustainable product requirements. Packaging must follow DLA-specific directives under RP001, with no additional preservation materials required beyond cleaning and drying, and all contractors must meet compliance obligations under multiple FAR and DFARS clauses, including trafficking in persons, equal opportunity for workers with disabilities, and limitations on arbitration agreements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9451
This contract pertains to the procurement of a commercial off-the-shelf item identified as AM-01-3 by Ameritape LLC, with NSN 5340015599845, under solicitation SPE7LX-26-U-9451. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, requiring strict adherence to MIL-STD-130N for identification marking and MIL-STD-129 for packaging and labeling, including the special marking code 32 for shelf-life compliance. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, containment, and palletization per DLA’s procurement requirements. The quantity is fixed at 169 units with zero variance allowed, delivered FOB origin within 116 days, with inspection and acceptance occurring at destination. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical attributes are verified at Level VII or AQL 0.1. The contract is subject to DLA’s Master List of Technical and Quality Requirements, with Covered Defense Information applicable. This is a total small business set-aside under NAICS code 332722, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek designated as the point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7LX-26-U-9366
The contract pertains to the procurement of a KNOB with NSN 5355-00-072-1991 and part number 247039, supplied by C&H HYDRAULICS INC under a Women-Owned Small Business Set-Aside solicitation numbered SPE7LX-26-U-9366. The request is for 25 units, each to be delivered FOB origin within 191 days, with no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements, including palletization as specified. The unit of issue is each, and inspection and acceptance occur at the destination. The contract specifies a unit price of $25.00, totaling $625.00, and confirms this is an estimated quantity subject to change. The solicitation was posted on August 10, 2026, with a response deadline of August 25, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7LX-26-U-9382
This contract pertains to the procurement of 2,717 units of RETAINER, PACKING with NSN 5330-01-154-7159 under solicitation SPE7LX-26-U-9382, issued as a Total Small Business Set-Aside. The requirement mandates compliance with all applicable technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the controlling revision determined by the solicitation issue or award date depending on acquisition size. The item is explicitly prohibited from containing any asbestos as defined in Fed-Std-313 and has been approved for manual exclusion from the First Destination Packaging Program, meaning it is not eligible for standard commercial packaging and must meet proprietary packaging specifications. Delivery must be completed within 94 days after award, and all supplies must be free of government identification if not accepted. The procurement is managed by the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek listed as the primary point of contact. The NAICS code is 339991, indicating the item falls under Other Miscellaneous Manufacturing, and the solicitation was posted on August 10, 2026, with responses due by August 25, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336360
New
DIBBS
SEAT, VEHICULAR
Solicitation # SPE7LX-26-U-9494
The contract pertains to the procurement of 48 vehicular seats under NSN 2540-01-568-2329, with a delivery deadline of 107 days after order. It is issued under solicitation SPE7LX-26-U-9494, with a response deadline of August 25, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, targeting NAICS code 336360 for motor vehicle body manufacturing. The item contains technical data subject to export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including U.S. company subsidiaries and foreign nationals within the United States, without explicit authorization from the Department of State or Commerce. DFARS 252.225-7048 governs compliance, and access to this data is restricted to contractors holding a valid US/Canada Joint Certification Program certification, having completed mandatory DLA training on export-controlled data handling, and received formal approval from the DLA controlling authority. Additionally, the vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization, ensuring adherence to cybersecurity standards for handling sensitive information. The contracting office is the Strategic Acquisition Program Directorate within the Department of Defense, with Theodore Misiolek listed as the primary point of contact.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7LX-26-U-9417
This contract is for the supply of SEAL, PLAIN items under solicitation SPE7LX-26-U-9417, designated as a total small business set-aside with a NAICS code of 339991. The items are identified by NSN 5330-01-282-0909 and part numbers 063000143 and A-000-232-113-000, with a total quantity of 14 units delivered in a single line item at a unit price of $14.00. Delivery is required within 112 days from the origin point under FOB terms, with no variance permitted in quantity, and both inspection and acceptance occur at the destination. The item is classified as a critical application with a non-extendable shelf life of 180 months, requiring at least 85% of that shelf life to remain at the time of delivery. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag, and must adhere to MIL-STD-2073-1E for preparation and MIL-STD-129 for marking—with special marking code 32 indicating Type I shelf-life status. Palletization follows DLA’s packaging requirements, and intermediate containers must meet MIL-P-4861 specifications. The contract strictly prohibits the use of ozone-depleting chemicals and intentional addition of mercury or mercury compounds, except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, and certain reagents approved by NAVSEA. Mercury-containing portable lamps and instruments must have shockproof construction and a secondary containment barrier as defined by NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. Configuration changes require formal engineering change proposals, and any deviations or waivers must be formally requested. The item is subject to Covered Defense Information protocols, and packaging and shipping of hazardous materials must follow IP025 standards. All documentation and markings must conform to MIL-STD-130N for identification of U.S. military property and the contract uses the DoD-authorized unit of issue as defined in official DLA resources.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9415
This contract, identified by solicitation number SPE7LX-26-U-9415, is a total small business set-aside under NAICS code 332510 for the procurement of 72 units of COVER, ACCESS with NSN 5340-01-245-2424, requiring delivery within 58 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The item must be manufactured using a metal casting process, and tooling is essential for production; sourcing and engineering support are available through designated DLA aviation and land-maritime supply chain teams. The contract prohibits the use of Class I ozone-depleting chemicals in any component or process, overriding any conflicting specification but not exempting the product from its performance requirements, and mandates prior approval for all substitute chemicals. Technical data associated with the item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Access to such data is limited to contractors with approved JCP certification, completed DOD export control training, and prior DLA authorization. The contractor must also hold Cybersecurity Maturity Model Certification (CMMC) Level 2 certification from a certified third-party assessment organization. Additionally, all supplies must have government identification removed if not accepted, and the contract falls under DLA’s Controlled Defense Information protocols. The point of contact is Theodore Misiolek, reachable via email or phone, and all responses are due by August 25, 2026.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336320
New
DIBBS
GENERATOR, ENGINE ACCES
Solicitation # SPE7LX-26-U-9365
This contract pertains to the procurement of a generator engine accessory, specifically an alternator, identified by NSN 2920000969252 and part numbers 19020208 and 20039, with a required quantity of seven units. The item is classified as a critical application item and will be delivered FOB origin within 69 days under DLA Direct, CONUS coverage. The contract mandates strict compliance with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements for Procurement, with a unit of issue of each and a quantity per unit pack of one. The quantity variance is strictly zero percent, meaning no overages or shortages are permitted. Inspection and acceptance occur at the destination, and government identification must be removed from any non-accepted supplies. The contract was issued under solicitation number SPE7LX-26-U-9365 with a response deadline of August 25, 2026, and the item falls under NAICS code 336320. The Point of Contact for inquiries is Theodore Misiolek of the Department of Defense’s Strategic Acq Program Directorate.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7LX-26-U-9464
The contract pertains to the procurement of SEAL, PLAIN ENCASED, identified by NSN 5330-01-614-9289 and part number 556101 from SKF USA INC., with a total quantity of 59 units at a unit price of $59.00, resulting in a total price of $3,481. The item is subject to strict packaging requirements under MIL-DTL-117, TYPE II, CLASS C, STYLE 1, mandating medium duty, waterproof, greaseproof, and opaque bagging to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings required and palletization following DLA packaging standards. The item is prohibited from containing asbestos as defined in FED-STD-313 and must be delivered FOB origin within 71 days with zero variance in quantity. Inspection and acceptance occur at the destination. The solicitation is a total small business set-aside under NAICS code 339991, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
PEDESTAL, GUN MOUNT
Solicitation # SPE7LX-26-U-9488
The contract pertains to the procurement of a pedestal gun mount, identified by NSN 1005131229621 and part number 3634001650 from FN HERSTAL S.A., with a quantity of six units to be delivered within 294 days via FOB origin terms. The acquisition is categorized as a DLA Direct, CONUS contract under solicitation SPE7LX-26-U-9488, and the quantity is fixed with no variance allowed—zero percent plus or minus. Inspection and acceptance both occur at the destination, and packaging must strictly conform to MIL-STD-2073-1E with specific packaging methods, materials, and controls including unit containers designated as E5 and packaging code U. Marking must comply with MIL-STD-129 and includes no special marking codes. The item is subject to DLA’s packaging requirements and requires full supply chain traceability documentation to be retained by the contractor as mandated by DLAD Procurement Note C03 issued in August 2016. Additionally, the contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and is governed by the revision of the master in effect on the solicitation issue date. The unit of issue is each (EA), and the unit price is not explicitly listed but the total price is calculated based on the fixed quantity. The contract is under the authority of the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek designated as the primary point of contact.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SPRING, HELICAL, EXTE
Solicitation # SPE7LX-26-U-9435
The contract pertains to the procurement of 108 helical extension springs identified by NSN 5360-01-564-9094 under solicitation SPE7LX-26-U-9435, with a response deadline of August 25, 2026, and a delivery requirement of 78 days after award. The acquisition is a total small business set-aside under NAICS code 332722, managed by the Department of Defense's Strategic Acquisition Program Directorate. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. The item includes technical data subject to export control under ITAR or EAR, requiring strict handling protocols, including prior authorization for disclosure to foreign persons, even within the United States. Contractors must hold approved US/Canada Joint Certification Program status, complete required DLA training, and pass a questionnaire to gain access to controlled data, as mandated by DFARS 252.225-7048. Packaging must adhere to DLA standards, and any configuration changes require formal engineering change proposals or variance requests. Government identification must be removed from non-accepted supplies, and all data handling must comply with export control regulations applicable to both U.S. entities and their foreign subsidiaries. The point of contact for this solicitation is Theodore Misiolek, reachable via the provided email and phone number.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333612
New
DIBBS
CABLE ASSEMBLY, CONT
Solicitation # SPE7LX-26-U-9467
The contract pertains to the procurement of a cable assembly, control, with part number MEA-25000-5505 and NSN 3040-01-670-1299, for a quantity of 140 units at a unit price of $140.00, resulting in a total price of $19,600. The item is procured under a DLA Direct, CONUS coverage arrangement, with delivery required within 128 days FOB origin. The quantity is fixed with no variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and containerization, with labeling adhering to MIL-STD-129 without special markings. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract is issued under solicitation number SPE7LX-26-U-9467, with a response deadline of August 25, 2026, and is classified under NAICS code 333612. The point of contact is Theodore Misiolek from the Strategic Acquisition Program Directorate within the Department of Defense.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, SEAL REPLACE
Solicitation # SPE7LX-26-U-9461
This contract specifies the procurement of a Parts Kit for seal replacement, identified by NSN 5330016912466 and part number 19420837, with a quantity of 1,117 units to be delivered FOB origin within 97 days. The supply is subject to strict packaging requirements per MIL-STD-2073-1E Appendix D for kits and DLA packaging guidelines, with markings compliant to MIL-STD-129 and no special marking codes required. The item is covered under a Total Small Business Set-Aside and is procured through a DLA Direct contract within the Continental United States. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. Contractor retention of supply chain traceability documentation is mandatory under DLA Directive Procurement Note C03 from August 2016, and no ozone-depleting chemicals may be used in any component, regardless of specification allowances, unless specifically authorized substitutes are approved. The item is subject to inspection and acceptance at the destination with zero variance allowed in quantity delivery. The solicitation number is SPE7LX-26-U-9461, posted on August 10, 2026, with responses due by August 25, 2026, and primary point of contact is Theodore Misiolek at DLA.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details