Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

25--WINDOW,VEHICULAR

Awarded

SPE7L126RX001Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract awarded under solicitation number SPE7L126RX001 is for the procurement of vehicular windows, classified under NAICS code 336211, which pertains to motor vehicle bodies and trailers manufacturing. The award notice was posted on April 28, 2026, and is managed by the Defense Logistics Agency Land and Maritime, a division of the Department of Defense, with the office located in Columbus, Ohio, ZIP code 43218-3990. There is no specified set-aside type, indicating the contract is open to all eligible bidders without preference based on business size or category. The place of performance has not been defined with specific geographic details, suggesting flexibility or that it will be determined based on vendor capabilities. The primary point of contact for inquiries is Patrick Sikorski, reachable via email at [email hidden] or by phone at [phone hidden]. Further details and documentation can be accessed through the SAM.gov workspace link associated with this opportunity.

General Info

Procurement of vehicular windows for Defense Logistics Agency, open to all bidders, contact Patrick Sikorski.

Agency

Department Of Defense → DLA Land And Maritime

Contract Value

$0

NAICS

336211 - Motor Vehicle Body Manufacturing

Place of Performance

OH, USA

Set-Aside

NONE

Awardee

HAWKINS GLASS WHOLESALERS, L.L.C

Award Issued Date

04/28/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedApr 28

Award Notice

AwardedApr 28

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / AgencyDepartment Of Defense → DLA Land And Maritime

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Patrick Sikorski

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=b6eed5a9916a44ae9e18447120739928

Similar Contracts

Same NAICS industry code

DOOR, HATCH, VEHICLE

Solicitation # SPE7L3-27-T-1472

This fixed-price solicitation from the DLA Weapons Support Land Supplier Operations Vehicle Support is for the procurement of one left-hand personnel welded vehicle hatch door (NSN 2510013059923) for use on the M88E1 Full Tracked Medium Recovery Vehicle. The manufacturing process requires metal casting and specific tooling, with critical and ballistic welding performed according to TACOM weldment drawing 12479550 and associated technical data packages. Quality assurance is stringent, requiring a Contractor Quality Control (COQC) plan approved by the DCMA QAR prior to production, and compliance with SAE AS9003 or ISO 9001 standards. The contract includes a mandatory First Article Test (FAT) for one unit, requiring the contractor to provide notice 20 days before testing and submit a report within 30 days of completion. Delivery is set for 355 days after order, with FOB, inspection, and acceptance all occurring at the origin. Packaging must adhere to MIL-STD-2073-1E and DLA RP001 requirements, with marking following MIL-STD-129. Key regulatory requirements include CMMC Level 2 self-assessment, safeguarding of covered defense information per DFARS 252.204-7012, and adherence to the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

HINGE, DOOR, VEHICULAR

Solicitation # SPE7M1-27-Q-0129

Solicitation SPE7M1-27-Q-0129 is a firm-fixed-price requirement issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 160 vehicular door hinges (NSN 2510-01-376-0667). The contract is a total small business set-aside under NAICS 336211, with award based on the best value considering price, offered delivery, and past performance. Delivery for the primary items is set at 258 days after order, though a first article testing process is required, extending the total delivery timeline to 348 days to account for report submission and government evaluation. The contractor must adhere to strict quality and technical standards, including DLA Master List requirements, MIL-STD-1916 or ASQ H1331 sampling plans, and specific Army drawings. Key compliance mandates include the prohibition of Class I ozone-depleting chemicals and adherence to specialty metal requirements per DFARS 252.225. Inspection and acceptance are generally conducted at the origin, while packaging must comply with ASTM D3951 and MIL-STD-129. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system, with final delivery directed to DLA Distribution Red River in Texarkana, Texas.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

BRACKET, ENGINE MOUNT

Solicitation # SPE7L1-27-T-2770

This solicitation, issued by the DLA Weapons Support Land Supply Chain, is a small business set-aside request for quotations for one engine mount bracket, also identified as an engine disconnect bracket (NSN 2510-01-291-5870). The item is designated as a critical application item and must be produced according to specific technical data packages and drawings. Delivery is required within five days after the order, with the place of performance located at Schofield Barracks, Hawaii. The government will not evaluate or award contracts to offers utilizing additive manufacturing for this procurement. The contract imposes strict quality and security requirements, including mandatory compliance with ISO 9001:2015 or an equivalent standard for the manufacturer's inspection system. It incorporates significant regulatory constraints, including CMMC Level 2 certification, ITAR and EAR export controls, and the Buy American Act. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, with a price evaluation preference granted to HUBZone small business concerns.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

EXTENSION, FENDER, VE

Solicitation # SPE7M1-27-T-0902

Solicitation SPE7M1-27-T-0902 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 21 vehicular fender extensions, identified by NSN 2510007572750. The contract requires delivery within 109 days after order, with shipping terms set as FOB Origin and the final destination for inspection and acceptance located at DLA Distribution San Joaquin in Tracy, California. Technical compliance is governed by TDP Rev A Gen 6 and the DLA Master List of Technical and Quality Requirements, with a specific prohibition against the use of Class I ozone-depleting chemicals. The procurement includes stringent packaging and security mandates, requiring adherence to ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization. From a regulatory standpoint, the contract mandates a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and compliance with the Buy American Act and Berry Amendment. Offers produced via additive manufacturing are ineligible for award. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and the DLA Internet Bid Board System for quote submissions. HUBZone certified small businesses are eligible for price evaluation preference.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

25--KINGPIN,FIFTH WHEEL

Solicitation # SPE7L4-27-U-0103

Solicitation SPE7L4-27-U-0103 is a unilateral Indefinite Delivery Contract issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of two fifth wheel kingpins, identified by NSN 2510-01-522-6011. This acquisition is a total small business set-aside under NAICS code 336211. The delivery requirement is set for 89 days after receipt of order, with shipping terms established as FOB Destination. Inspection and acceptance will also take place at the destination. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Special marking requirements include arrow up and open this side labels, as well as a notification that mechanical handling is required. Invoicing must be processed electronically through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Award evaluation will be based on the price quoted for the estimated annual demand.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Turn Signal Switch Opening Shield SupplierThis subcontract involves the manufacture or sourcing of eight turn signal switch opening shields for prime contractors under the DLA Weapons Support Fluid Handling Division of the Department of Defense. The supplier is required to provide items identified by NSN 2510014815209, ensuring full compliance with the DLA Master List of Technical and Quality Requirements and RP001 DLA Packaging Requirements for Procurement. The project falls under NAICS code 336211 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on October 25, 2026, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Fender Extensions (NSN 2510004551351)This subcontract involves the manufacture or procurement of fender extension components under NSN 2510004551351 for prime contractors supporting the Department of Defense DLA Weapons Support Land Supplier Operations. The contractor must ensure all parts adhere to DFARS Buy American requirements and technical data specifications, specifically prohibiting the use of Hexavalent Chromium. Deliveries must be packaged according to RP001 and MIL-STD-129 standards. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 certification and demonstrate full compliance with ITAR/EAR regulations and NIST SP 800-171 cybersecurity standards. The performance of this contract is centered in New Cumberland, Pennsylvania, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

STAKE, VEHICLE BODY

Solicitation # SPE7L3-27-T-1353

Solicitation SPE7L3-27-T-1353 is a fixed-price procurement issued by the Defense Logistics Agency for 13 units of vehicle body stakes, identified by NSN 2510013149372. The items must be CARC painted in accordance with MIL-S-62272B(AT) paragraphs 3.7, 3.7.2, and 3.7.3. Delivery is required within 220 days, with a need ship date of June 14, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution Red River in Texarkana, Texas. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List of Technical and Quality Requirements taking precedence. Palletization must follow RP001 requirements. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. This is not a small business set-aside and falls under NAICS code 336211. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity and reporting requirements. All quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

EXTENSION, FENDER

Solicitation # SPE7L3-27-T-1338

Solicitation SPE7L3-27-T-1338 is a fixed-price procurement issued by the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support, for the supply of six fender extensions under NSN 2510-00-455-1351. The required delivery date is July 18, 2027, with shipments to be made FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. This acquisition is not a small business set-aside and falls under NAICS code 336211. The contract contains stringent regulatory requirements, including export controls under ITAR and EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and specific DLA training to access technical data. Quality assurance is managed through origin inspection, requiring manufacturer compliance with SAE AS9003 or ISO 9001. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking follows MIL-STD-129. Additionally, the contract mandates compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards, including CMMC Level 2 requirements. Invoicing and payment must be processed electronically via the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L4-27-T-0616

Solicitation SPE7L4-27-T-0616 is a request for quotations issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of 17 metal grilles, identified by NSN 2510014455605. The requirement is not a small business set-aside and falls under NAICS code 336211. The items are to be delivered FOB Origin to DLA Distribution Anniston, Alabama, with a required delivery date of May 19, 2027, and a delivery lead time of 194 days after receipt of order. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Key regulatory requirements include the Buy American and Balance of Payments Program (DFARS 252.225-7001), the Berry Amendment, and cybersecurity protections under DFARS 252.204-7012. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. Offerors are prohibited from using additive manufacturing processes for these items unless specifically authorized.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-2421

Solicitation SPE7L1-27-T-2421 is issued by the DLA Weapons Support Land Supply Chain for the procurement of one metal exhaust grille involving weldment and machining, identified by NSN 2510-01-083-5433. The requirement is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small business concerns. Delivery is required by March 30, 2027, with a need ship date of February 16, 2027, shipped FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. The procurement is subject to a 102-day after delivery order period and may be eligible for automated award. Compliance requirements are stringent, requiring CMMC Level 2 certification and adherence to ITAR or EAR export controls, which necessitates an approved US/Canada Joint Certification Program certification for access to technical data. Packaging must follow RP001 and special instruction AK10835433, with marking compliant with MIL-STD-129. Inspection occurs at the origin using MIL-STD-1916 or comparable zero-based sampling plans. Administrative requirements include electronic invoicing via Wide Area WorkFlow and strict adherence to the Buy American Act and Berry Amendment. Additive manufacturing is prohibited unless specifically authorized.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

BOARD, FLOOR TRAILER

Solicitation # SPE7L1-27-T-2381

This solicitation, issued by the Defense Logistics Agency (DLA) under solicitation number SPE7L1-27-T-2381, is for the procurement of one wood floorboard for M872 series semitrailers, identified by NSN 2510010672630. The required material is White Oak with a minimum average weight of 47 PCF and no individual piece less than 42 PCF. Technical specifications require a maximum moisture content of 22 percent, S2S surfacing with square edges, and specific dimensions of 1-3/8 inches in thickness and 7-1/2 inches in width. The boards must be treated with a water-repellent preservative that does not contain chlorinated phenols. The overall length is 39 feet 3-1/4 inches, and the item may be supplied as shorter full-width pieces provided they are at least 4 feet long and align with specified crossmember spacing. The contract is open for full and open competition and requires delivery within 10 days after order, with an original required delivery date of October 13, 2026. Shipping is FOB Origin, with the final destination and bulk break point located at Fort Leonard Wood, Missouri. Packaging must comply with ASTM D3951 and RP001, utilizing steel straps with metal or plastic edge protectors, while marking must adhere to MIL-STD-129. Quality assurance will be managed through destination inspection and acceptance using sampling methods per MIL-STD-1916 or ASQ H1331. Administrative requirements include the use of the Wide Area Workflow (WAWF) for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act and the Berry Amendment.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

INSULATING COMPOUND,ELECTRICAL

Solicitation # CM26161009

This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 1 month

HEADSET-MICROPHONE : NSN 5965-01-204-8505

Solicitation # SPE7MX26RX089

This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7MX26RX102

DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.

Hardware Manufacturing

POSTED

DEADLINE

in about 1 month

Supplier for Component NSN 015715718This subcontract through DLA Land and Maritime requires the manufacture or distribution of 603 units of hardware component NSN 015715718. The supplier must ensure all components meet strict government specifications, including the application of MIL-STD-129 markings and the use of standard commercial packaging. Additionally, the provider is required to submit proof of commerciality in accordance with FAR Part 12. The completed materials are to be delivered to prime contractors located in Columbus, Ohio. This opportunity falls under NAICS code 332999 and is managed by the Department of Defense. Interested parties must adhere to the specified response deadline of October 29, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 14 hours

Supplier for Component NSN 016603400This subcontract with DLA Land and Maritime requires the manufacture or distribution of 1,169 units of hardware component NSN 016603400. The supplier must ensure all components comply with government specifications and are delivered to Columbus, Ohio. The contractor is responsible for applying MIL-STD-129 markings and utilizing standard commercial packaging. Additionally, the supplier must provide proof of commerciality in accordance with FAR Part 12. This requirement falls under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 14 hours

Oshkosh Wholistic Sole Source Project

Solicitation # 75Q65

DLA Land and Maritime, specifically the Strategic Acquisitions office, is conducting market research for a potential Indefinite Delivery Indefinite Quantity (IDIQ) long term contract under solicitation 75Q65. The project focuses on the procurement of components and support for the Oshkosh MRAP-All Terrain Vehicle (M-ATV), including SOCOM variants and Mine Resistant Vehicles. Required items encompass a wide range of vehicular components, such as structural body parts, mechanical and electrical systems like wiring harnesses and fluid filters, and various specialized hardware and mounting brackets. While Oshkosh Defense is currently the only approved source, the agency is seeking additional manufacturers capable of producing these items. The procurement will be evaluated and awarded on a per NSN/CLIN basis, with specific requirements for standard commercial packaging and MIL-STD-129 markings. Interested parties must submit a Market Research Questionnaire by October 28, 2026, providing details on their business size, manufacturer status, and distribution networks. The performance location is listed as Columbus, Ohio, and the effort falls under NAICS code 332999. Estimated buy quantities have been identified for various components, though a total contract value has not yet been established.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 14 hours

Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.

POSTED

DEADLINE

MULTI NSN DIESEL ENGINE

Solicitation # CM26259595

DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

VALVE, REGULATING, FL

Solicitation # CM26163006

DLA Weapons Support is conducting a sources sought action under project number CM26163006 to identify potential manufacturers for a regulating fluid valve, identified by NSN 4810010865757. The agency is seeking to establish a long-term contract with an estimated annual quantity of 301 units. This opportunity falls under NAICS code 332912 for Fluid Power Valves and Hose Fittings manufacturing, with a small business size standard of 1,000 employees. Because the agency does not possess the drawings or specifications for these items, interested parties must submit the required documentation per DLAD 52.217-9002 to become approved sources. Prospective bidders are required to complete a market survey and spreadsheet, providing manufacturer locations and points of contact. All responses must be submitted to Kristina Blanton by October 29, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

25--STRAP,DOOR CHECK,VE

Solicitation # SPE7L126U0302

DLA Land And Maritime

POSTED

DEADLINE

25--PARTS KIT,FLOOR,VEH

Solicitation # SPE7L326T9218

DLA Land And Maritime

POSTED

CLOSED

25--SHOCK ABSORBER,DIRE

Solicitation # SPE7L326T5281

DLA Land And Maritime

POSTED

DEADLINE

25--DOOR,HATCH,VEHICLE

Solicitation # SPE7L126U0319

DLA Land And Maritime

POSTED

CLOSED

25--HINGE,DOOR,VEHICULA

Solicitation # SPE7L326T8827

DLA Land And Maritime

POSTED

CLOSED

25--SHOCK ABSORBER,DIRE

Solicitation # SPE7L126T348B

DLA Land And Maritime

POSTED

DEADLINE

25--SHOCK ABSORBER,LEVE

Solicitation # SPE7L426T3879

DLA Land And Maritime

POSTED

CLOSED

25--FRAME SECTION,STRUC

Solicitation # SPE7L326T8748

DLA Land And Maritime

POSTED

CLOSED

WINDOW, VEHICULAR DO

Solicitation # SPE7L1-26-T-395A

LAND SUPPLY CHAIN

POSTED

CLOSED

25--VALVE,REGULATING,AI

Solicitation # SPE7M126T7433

DLA Land And Maritime

POSTED

DEADLINE

Acquisition of One 6-Pax Executive Van

Solicitation # 19JA8026Q0024

US Embassy Tokyo

POSTED

CLOSED

25--DOOR,HATCH,VEHICLE

Solicitation # SPE7LX26U5692

DLA Land And Maritime

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS