This Solicitation opportunity from Georgia was posted on August 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

26-030 ASSET MANAGEMENT SERVICES - PAVEMENT (ROADS) & SIGNS

Closed

PE-65700-NONST-2026-000000099State & Local

Submission Closed09/03/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

DIBBS

Quality Testing Laboratory – First Article Test (FAT)This subcontract involves providing Quality Testing Laboratory services to perform First Article Testing for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The primary objective is to validate manufacturing processes by verifying material properties and dimensions against Reference Drawing NR 81755 C2989, Revision H. All measurements must be conducted using CMM, calipers, and micrometers calibrated to national standards, and the performing entity must maintain ISO/IEC 17025 certification. The scope of work requires the delivery of a certified sample part and a formal First Article Test Report. Performance will take place at Hill AFB, and the project falls under NAICS code 541380. Interested parties should note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Test (FAT) ExecutionThis subcontract, titled First Article Test Execution, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The primary objective is to perform First Article Testing for prime contractors to verify that NSN 6605-01-607-1996 complies with Section C quality standards. The scope of work involves conducting technical testing on the first unit using laboratory equipment or specialized testing rigs, documenting all findings, and delivering a certified first article unit along with a formal FAT Report. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must note the posted date of October 25, 2026, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Specialized Materials Testing LaboratoryThis subcontract opportunity for the Specialized Materials Testing Laboratory supports the DLA Weapons Support Land Supply Chain by providing critical validation testing for prime contractors. The scope of work involves conducting Government Production Lot Testing and managing the delivery of random samples to the Naval Undersea Warfare Center in Keyport, Washington. To ensure compliance, the contractor must utilize specialized laboratory equipment to validate materials against MIL-DTL-117 and ISO 3601-3 standards and maintain the necessary accreditation for naval undersea warfare components. The project requires the delivery of comprehensive test reports and formal validation certifications. Performance will take place in Tracy, California, under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Production Lot Testing (PLT) ServicesThis subcontract for Production Lot Testing services supports prime contractors on DLA Troop Support material contracts through specialized quality conformance testing. The scope of work involves conducting Production Lot Testing to validate ASTM D2000 rubber specifications, utilizing sampling methods in accordance with MIL-STD-1916 or ASQ H1331. The selected provider will use laboratory equipment to assign verification levels for minor, major, and critical attributes, culminating in the delivery of an approved Production Lot Test Report. Managed by the Department of Defense under DLA DIST SAN JOAQUIN, the performance of this contract is located in Tracy, California. The opportunity falls under NAICS code 541380, with a response deadline set for November 5, 2026.

POSTED

DEADLINE

First Article Testing (FAT) and CertificationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the performance of First Article Testing and Certification for self-locking clinch nuts. The selected contractor will conduct physical and mechanical evaluations on first production units to verify material integrity, dimensions, and locking mechanisms using specialized metrology equipment, hardness testers, and torque/tension rigs. All work must be performed against limited rights data and requires the provider to hold AS9100 or ISO 9001 certification. The scope of work culminates in the delivery of a First Article Test Report and a Certification of Compliance. Performance will take place at Tinker AFB, and the opportunity falls under NAICS code 541380. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Measurement and Testing ServicesThe Precision Measurement and Testing Services subcontract involves the measuring and testing of drive tube assemblies for prime contractors under DLA supply contracts. The selected provider must execute specific test protocols defined in RT001 to verify material integrity and dimensional tolerances using calibrated equipment. Final deliverables include validated components and certified test reports. This effort is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with performance located at Hill AFB. To be eligible, contractors must maintain CMMC Level 2 and DFARS 252.204-7012 compliance. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Critical Application Item Inspection & TestingThis subcontract, titled Critical Application Item Inspection and Testing, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider will perform independent quality assurance and inspection services for prime contractors fulfilling DLA supply contracts, with the primary place of performance located at Tinker AFB. The scope of work involves executing sampling plans according to MIL-STD-1916 or ASQ H1331, specifically utilizing zero-based sampling for critical application items. Key technical requirements include validating impeller dimensions against Honeywell specifications using precision measurement tools and delivering comprehensive inspection reports and certifications of conformance.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Production Lot Testing and Quality AssuranceThis subcontract for Production Lot Testing and Quality Assurance supports prime contractors on DLA Weapons Support Maritime Supply Chain projects. The scope of work involves executing performance verification for generators using electrical diagnostic tools and load banks to ensure output stability, while coordinating all mandatory government testing in accordance with Procurement Note E04. The final deliverables include validated samples and certified test reports. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the requirement for technical data access, the contractor must hold CMMC Level 2 and US/Canada Joint Certification Program certifications. Interested parties must respond by November 5, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test (PLT) Services involves performing validation testing on power cable assemblies for prime contractors under DLA supply contracts. The selected provider will execute PLT using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331, utilizing specialized electrical testing and validation equipment to ensure all assemblies meet strict government standards. A final test report and certification for each production lot are required deliverables. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the contract requires the provider to maintain ISO 9001:2015 quality system compliance. The work is designated under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports prime contractors on DLA supply contracts through the Department of Defense. The scope of work involves the testing and validation of three units of item 5340/12506036, utilizing aerospace-grade testing rigs and measurement equipment. All sampling must be performed in accordance with MIL-STD-1916 or ASQ H1331 standards, and the final deliverables include three tested units and a completed First Article Test Report. The project will be performed in New Cumberland, Pennsylvania, under NAICS code 541380. Due to the handling of controlled technical data, the contractor is required to maintain CMMC Level 2 certification. Interested parties must respond by November 5, 2026, to the DLA Weapons Support Land Supply Chain agency.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Test (FAT) for Connector ReceptaclesThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the performance of First Article Testing for connector receptacles associated with NSN 5935011710645. The selected contractor will conduct rigorous testing on initial production samples to ensure full compliance with the technical data package, specifically utilizing laboratory equipment to verify conductivity, fit, and durability. The primary deliverables for this engagement are a comprehensive FAT Report and a formal certification of compliance. The work is categorized under NAICS code 541380 and will be performed in Sioux Falls, South Dakota. Interested parties must adhere to the timeline established by the posting date of October 25, 2026, with a response deadline of November 2, 2026. This effort supports prime contractors in meeting the strict quality and technical standards required for Defense Logistics Agency supply contracts.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Electrical Cable Testing and Certification LaboratoryThis subcontract for the Electrical Cable Testing and Certification Laboratory supports the DLA Weapons Support Maritime Supply Chain by performing First Article Testing for prime contractors. The scope of work involves utilizing an accredited laboratory and certified measurement equipment to validate the physical and electrical properties of special purpose electrical cable in accordance with MIL-DTL-55021/2D standards. The selected provider is required to deliver a formal First Article Test report within 150 calendar days. This project falls under NAICS code 541380 and is associated with the Department of Defense, with the place of performance located at Langley AFB.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days

AI Contract Overview

The Floyd County Board of Commissioners is soliciting sealed bids for asset management services for approximately 735 paved centerline road miles and associated signage. The primary objective is to transition from manual data collection to a professional survey process. The scope includes annual inspections of arterials and collectors, and inspections of local roads every three years. Pavement ratings must adhere to the latest ASTM-D6433-18 standards using PCI, and signs must be identified by MUTCD codes. Deliverables include a pavement condition survey and a sign inventory with data capable of being integrated into the County's OpenGov system. Bids are due by 11:00 AM on September 3, 2026, and must be submitted via the Bonfire hub portal. The contract may be awarded on a lump sum or individual item basis to the responsible bidder deemed most advantageous to the County. Required submission documents include a pricing form, vendor information, and various certifications regarding non-discrimination, non-collusion, and E-Verify or S.A.V.E. compliance. The successful contractor must provide comprehensive liability and workers' compensation insurance and indemnify Floyd County from claims arising from performance. Payment is based on unit pricing and is subject to approval by a county representative.

General Info

Floyd County seeks sealed bids for pavement and signage asset management services due September 3, 2026.

Agency

Georgia → Floyd County Board of Commissioners

NAICS

541380 - Testing Laboratories and Services

Place of Performance

GA, USA

Set-Aside

NONE

Documents

BID 26-030 Asset Management Services for Pavement and Signs

rfp

High

Bid Price Submission Form for Asset Management Services Bid #26-029

bid-price-submission-form

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 7

Solicitation

Response DeadlineSep 3

Deadline has passed

Submission Closed

09/03/2026, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGeorgia → Floyd County Board of Commissioners

Contacts1 person available

OfficeN/A

Organization / AgencyGeorgia → Floyd County Board of Commissioners

Office AddressN/A

Contacts

Randy E. Self

contact@example.gov

+1 (555) 000-0000

Full Description

Sealed bids from qualified contractors will be received by the Purchasing Department of FLOYD COUNTY GEORGIA, at #12 East Fourth Ave, Suite 106 Rome, Georgia 30161, until 11:00 AM. legally prevailing time on September 3, 2026, for the purposes of providing: Asset Management Services for Pavement (Roads) and Signs