Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

26-426DOC-GRAHA-B-50552 | FY26 LAVATORY/TOILET COMBO UNITS

Active

26-426DOC-GRAHA-B-50552State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of lavatory and toilet combo units for the fiscal year 2026, specifically designated as solicitation number 26-426DOC-GRAHA-B-50552. The solicitation was issued by the Graham Correctional Center, located in Hillsboro, Illinois, with the point of contact being Lindsey Huston, the purchaser for this contract. The solicitation was posted on January 12, 2026, and is open to suppliers serving state and local government entities (SLED). The contract specifies the acquisition and delivery of combined lavatory and toilet units to be installed at the Graham Correctional Center. Although there is no set-aside type or NAICS code indicated, the contract aims to fulfill the facility’s infrastructure needs to enhance sanitation and functionality. All related communications and submissions are managed through the Illinois bid portal, with the performance location also in Hillsboro, Illinois.

General Info

Procurement of lavatory and toilet combos for Graham Correctional Center, Illinois, fiscal year 2026.

Agency

Illinois → Graham Correctional CenterView Agency

NAICS

332913 - Plumbing Fixture Fitting and Trim ManufacturingView NAICS

Place of Performance

Hillsboro, IL 62049, Hillsboro, IL, 62049, USA

Set-Aside

NONE

Documents

(3)

Basic Ordering Agreement (BOA) 26-426DOC-R-298063 / B-50552

DOCX•10 pages•basic-ordering-agreement

18" Wide Ligature-resistant Combination Lavatory/Toilet Units Specifications

PDF•specifications

Amendment B-50552 Questions and Answers

DOCX•1 page•amendment

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation

PostedJan 12

Solicitation

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyIllinois → Graham Correctional Center

Contacts1 person available

OfficeHillsboro, IL, 62049, USA

Organization / Agency

Illinois → Graham Correctional Center

View Agency Profile

Office AddressHillsboro, IL, 62049, USA

Contacts

Lindsey HustonPurchaser

+1 (555) 000-0000

Full Description

Show more

FY26 LAVATORY/TOILET COMBO UNITS

Similar Contracts

Same NAICS industry code

Commercial Plumbing Parts and Materials Supplier

POSTED

DEADLINE

in about 1 month

HYD PWR CNTRL ASY — 1680015700298 — SPRPA126QZC08

Solicitation # SPRPA1-26-Q-ZC08

This solicitation, issued by the Department of the Navy via DLA Aviation at Philadelphia, concerns the procurement of a Hydraulic Power Control Assembly. The material is designated as Critical because it is used in shipboard systems for aircraft launch and recovery, where failure could lead to serious personnel injury, loss of life, or loss of vital aircraft and shipboard systems. Consequently, special control procedures are required to ensure the receipt of correct material. The contractor is responsible for manufacturing, testing, and inspecting articles according to the NAWCAD LKE drawing package and specified drawing numbers. All necessary manufacturing aids, including fixtures, jigs, and test equipment, are the sole responsibility of the contractor. Compliance with IPC/EIAJ-STD-001C is expected if MIL-STD-454 is referenced, and packaging must adhere to MIL-STD 2073.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Plumbing Fixtures and Steel Grating Supply

US Embassy Tegucigalpa

POSTED

DEADLINE

Plumbing Fixtures and Components SupplyThis subcontract agreement with the Virginia Department of Transportation involves the procurement and delivery of commercial-grade plumbing fixtures, valves, and piping materials for projects within the Bristol District. The scope of work includes supplying toilets, sinks, showers, eye wash stations, and electronic control faucets, ensuring all materials adhere to industry standards and manufacturer recommendations. The selected provider is responsible for delivering these specified materials directly to VDOT sites or designated prime contractor warehouses. Interested parties must submit their responses by September 14, 2026, to be considered for this supply contract under NAICS code 332913.

Virginia Department of Transportation

POSTED

DEADLINE

Supply of Garbage Disposal Parts KitsThis subcontract involves the supply of 29 specialized garbage disposal parts kits, identified by NSN 4540012735778, to support prime contractors fulfilling Department of Defense supply contracts. The performance of this contract is centered at the DDSP New Cumberland Facility, with all deliverables required to strictly adhere to the RP001 DLA Packaging Requirements for Procurement and the RA001 DLA Master List of Technical and Quality Requirements. The procurement falls under NAICS code 332913 and was posted on September 2, 2026, with a response deadline of September 14, 2026. The selected provider is responsible for ensuring that all units are packaged and delivered according to specific DLA standards to ensure compliance with federal procurement guidelines.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

URINAL, STATIONARY

Solicitation # SPE86-26-T-5522

Solicitation SPE8E8-26-T-5522 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of eight stationary urinals, identified as critical application items under NSN 4510-00-885-7570. Approved parts include P/N 2835U from Anchor Fabricators Inc, P/N 4392 from Midstar Inc, and P/N 8001 from Mag Aerospace Industries, LLC. The delivery is required within 167 days after receipt of order, with a need ship date of March 1, 2027, and a final required delivery date of March 12, 2027. Shipping is designated as FOB Origin under the First Destination Transportation program, with the delivery destination being DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Inspection and acceptance will occur at the destination per FAR 52.246-1. Offerors must submit quotes via the DIBBS portal and are encouraged to provide quantity ranges to account for demand volatility. The procurement incorporates various federal and defense regulations, including the Buy American Act, Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Payment and invoicing must be processed electronically through the Wide Area Workflow system.

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-5414

Solicitation SPE8E8-26-T-5414 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 13 units of eye and face wash, identified by NSN 4510-01-053-5374. The requirement is under NAICS code 332913 and specifies a delivery timeline of 167 days after the award, with a designated shipping destination of DLA Dist San Joaquin in Tracy, California. The contract is issued under the First Destination Transportation program with FOB Origin terms. Compliance requirements include adherence to DLA packaging requirements RP001, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for shipment marking. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplies. Administrative requirements mandate the use of the Wide Area Workflow system for electronic invoicing and payment. Offerors must comply with the Buy American Act and other domestic material restrictions, and submit their quotations via the DIBBS portal.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

PARTS KIT, GARBAGE DISP

Solicitation # SPE8E8-26-T-5431

Solicitation SPE8E8-26-T-5431 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment for the procurement of 29 garbage disposal parts kits, identified by NSN 4540-01-273-5778. The contract is categorized under NAICS code 332913 and requires delivery within 29 days after the order is placed. Items are to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania, with both inspection and acceptance occurring at the destination. Quotations are due by September 14, 2026, and must be submitted via DIBBS or to the issuing office in Philadelphia. The procurement is subject to several technical and regulatory requirements, including DLA packaging requirements (RP001), MIL-STD-2073-1E for preservation, and MIL-STD-129 for marking. Special restrictions are in place regarding the use of mercury and the prohibition of hexavalent chromium. Contractors must comply with the Buy American and Balance of Payments Program and the Berry Amendment for domestic material preferences. Additionally, the contract mandates the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Security and safety compliance include safeguarding covered defense information per DFARS 252.204-7012 and adhering to the Hazard Communication Standard for any hazardous materials delivered.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

CURTAIN FLAP, RUBBER

Solicitation # SPE8E8-26-T-5427

Solicitation SPE8E8-26-T-5427 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of 58 rubber curtain flaps, identified as part number 89715 from Somat Company 04863. This item is designated as a critical application item. The required delivery date is January 6, 2027, with a need ship date of August 13, 2026. Delivery is set as FOB Destination, with the shipping address located at DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination point in accordance with FAR 52.246-1. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Palletization must comply with DLA packaging requirements RP001. Special material restrictions are in place, specifically prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware. The procurement is subject to the Buy American and Balance of Payments Program and requires the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. All quotes must be submitted through the DLA Internet Bid Board System.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Solicitation # SPE86-26-T-5501

Solicitation SPE8E8-26-T-5501 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 42 units of FAUCET CPRSN, identified by NSN 4510-01-631-1460. The procurement is managed by the DDSP New Cumberland Facility, with a required delivery date of February 19, 2027, and a need ship date of March 1, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, although the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 requirements. Administrative requirements include the use of Wide Area WorkFlow for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and prohibitions on covered defense telecommunications equipment. Quotations were due by September 14, 2026, and should be directed to the point of contact, Alexis Selby.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

CURTAIN, PULPER

Solicitation # SPE8E8-26-T-5496

Solicitation SPE8E8-26-T-5496 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment for the procurement of 70 units of Pulper Curtains, identified by NSN 4540-01-651-7310. The requirement specifies a delivery timeline of 71 days after the order is placed, with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is governed by NAICS code 332913 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions. Technical compliance requires adherence to basic drawing 53711 6960328 Revision J. Quality assurance is managed through sampling methods defined by MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances when using MIL-STD-105/ASQ Z1.4. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Offerors must comply with the Buy American Act and the Berry Amendment, and are prohibited from using additive manufacturing unless authorized. Price evaluation preferences are available for certified HUBZone small businesses, and all invoicing must be processed electronically via Wide Area WorkFlow.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

HEATING BLANKET, ELECTR

Solicitation # SPE8E8-26-T-5511

Solicitation SPE8E8-26-T-5511, issued by the Department of Defense agency DLA Dist San Joaquin, is a request for quotations for two electrical heating blankets under NSN 4540-01-526-3477. The procurement is conducted as a fully competitive acquisition in accordance with military and federal specifications, with a delivery requirement of 167 days after the order is placed. The place of performance is located in Tracy, California, and the response deadline for quotes is September 14, 2026. The contract is governed by the DLA Master Solicitation Revision 105 and includes specific technical and quality requirements identified by R and I numbers. Key compliance mandates include DLA packaging requirements, the removal of government identification from non-accepted supplies, and adherence to covered defense information protocols. The solicitation is categorized under NAICS code 332913 and incorporates standard federal clauses regarding the Buy American Act, HUBZone preferences, and nonmanufacturer rules.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

More opportunities from Illinois → Graham Correctional Center

Same awarding agency

Quality Assurance and Warranty Compliance ServicesThis contract involves comprehensive post-installation inspection, testing, and warranty support services for lavatory and toilet units installed at the Graham Correctional Center in Hillsboro, Illinois. The scope includes ensuring that all units meet quality standards and comply with applicable requirements, addressing any defects or issues that arise during the warranty period. The contractor is responsible for managing defect resolution and verifying compliance, thereby supporting ongoing maintenance and functionality of the lavatory equipment. The agreement mandates a three-year record retention period for all documentation related to inspections, testing results, warranty claims, and defect resolutions. This emphasizes the importance of accountability and traceability throughout the contract duration. The contract falls under the NAICS code 811490, which pertains to general maintenance and repair services, and is structured as a subcontract opportunity posted in January 2026. The primary location for performance is Hillsboro, Illinois, serving the needs of the Illinois Department of Corrections facility.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Installation and On-Site Integration ServicesThis contract involves the installation and on-site integration of 10 ligature-resistant lavatory and toilet units at the Graham Correctional Center in Hillsboro, Illinois. The scope includes all necessary plumbing connections, secure anchoring of the fixtures, and a comprehensive final inspection to confirm that the installations meet all relevant safety, performance, and code requirements. The work aligns with the industry standards under NAICS code 238220, which pertains to plumbing, heating, and air-conditioning contractors. The contract was posted on January 12, 2026, as a subcontract opportunity and focuses on enhancing safety within a correctional facility environment by addressing risks associated with ligature points. The final inspection and verification processes are critical components to ensure compliance and operational integrity of the installed units. Although specific agency office and point of contact details are not provided, the project is managed by the Illinois-based Graham Correctional Center, with the place of performance confirmed in Hillsboro, Illinois, 62049.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Delivery and Handling Services for Plumbing FixturesThe contract involves the transportation and on-site handling of ten lavatory/toilet combination units to Graham Correctional Center in Hillsboro, Illinois. It includes responsibilities such as secure packaging, freight management, unloading, and the precise placement of the fixtures at the installation site. This ensures the units are delivered safely and positioned correctly for immediate use or installation. This subcontract is categorized under the NAICS code 484220, which covers specialized freight trucking services. The contracting agency is Graham Correctional Center, and the services are to be performed at their facility located in the 62049 zip code. The contract was posted on January 12, 2026, and emphasizes careful logistics coordination to meet the needs of the correctional facility while adhering to secure handling protocols.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Ligature-Resistant Lavatory/Toilet Combo Units SupplyThis contract involves the procurement of 10 ligature-resistant lavatory/toilet combo units, specifically designed for installation in a correctional facility operated by the Graham Correctional Center in Hillsboro, Illinois. The order includes an equal split of 5 left-hand and 5 right-hand units, ensuring versatility in placement within the facility. The primary requirements emphasize durability, security, and adherence to safety standards, with an additional mandate that the units meet WaterSense efficiency criteria to promote water conservation. The solicitation falls under NAICS code 332410, indicating it pertains to metal product manufacturing. While the exact solicitation number and set-aside details are not provided, the contract is designated as a subcontract and was posted on January 12, 2026. The focus is on delivering high-quality, tamper-resistant fixtures that enhance inmate safety while aligning with environmental sustainability through water efficiency. The place of performance is fixed at the correctional center’s location in Hillsboro, zip code 62049, emphasizing local installation and use within the Illinois correctional system.

Power Boiler and Heat Exchanger Manufacturing

POSTED

DEADLINE

Freight & Delivery Services (F.O.B. Destination)This contract involves the transportation and delivery of large rolls of protective fabric, each being 86 inches wide and at least 100 yards in length, destined for the warehouse of a correctional facility. The delivery is to be executed under F.O.B. Destination terms, meaning the contractor is responsible for all transportation costs and risks until the fabric reaches the specified location safely. The contract is identified as a subcontract under the NAICS code 484220, which pertains to freight and delivery services. The placing agency for this contract is the Graham Correctional Center located in Illinois, with the place of performance specified as Hillsboro, ZIP code 62049. The solicitation was posted on January 12, 2026, and while some organizational details and point of contact information were not provided, the key requirement is the reliable and timely freight delivery of these specific large fabric rolls to the correctional facility's warehouse. This service is critical to ensure proper inventory and facility operations at the correctional center.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Quality Testing & Certification ServicesThis contract involves independent laboratory services to conduct quality testing and certification to ensure products meet specific industry standards. The testing focuses on evaluating tear strength, flame resistance, and antibacterial performance in compliance with ASTM, AATCC, and NFPA standards. The objective is to verify that materials or products meet these rigorous performance criteria to support safety and quality assurance requirements. The contract is a subcontract opportunity issued by the Graham Correctional Center in Illinois, with the place of performance located in Hillsboro, ZIP code 62049. Classified under the NAICS code 541380, the contract seeks expertise in scientific testing and analysis related to textiles and materials. Although specific solicitation details such as set-asides or contact points are not provided, the contract is publicly posted as of January 12, 2026, on the state's procurement platform, inviting qualified laboratories to participate in the evaluation process.

Testing Laboratories and Services

POSTED

DEADLINE

Raw Material Supply (PVC Coating & Polyester Scrim)This contract involves the supply of raw materials specifically 2.5 oz. 100% polyester Rochelle Knit scrim combined with a heavy-metal-free clear PVC coating. These materials are intended for the production of laminated protective fabric, which suggests a focus on durable, protective textile products. The contract is designated as a subcontract and falls under the NAICS code 313221, relating to textile and fabric mills. The contract is issued by the Graham Correctional Center in Illinois, with the place of performance located in Hillsboro, Illinois, ZIP code 62049. Details such as solicitation number, set-aside status, and point of contact are not provided. The emphasis on heavy-metal-free PVC coating highlights environmental and health considerations, ensuring safe use in the laminated fabric manufacturing process.

Narrow Fabric Mills

POSTED

DEADLINE

Protective Fabric Manufacturing (Institutional Grade)This contract involves the manufacture and supply of an 11-ounce double-coated, 3-ply vinyl-polyester laminate fabric specifically designed for institutional mattress covers. The fabric is characterized by its enhanced tear strength, antibacterial properties, and flame retardant capabilities, making it suitable for use in environments requiring durable and safety-compliant materials. The contract is classified under NAICS code 313230, which pertains to fabric manufacturing, and is issued by the Graham Correctional Center in Illinois. The production and delivery of the fabric are to be carried out in Hillsboro, where the place of performance is located. This subcontract, posted in January 2026, aims to fulfill the material needs of correctional facility mattress covers, ensuring both functional and safety standards are met through the specified material features. The contract details indicate a focus on protective institutional-grade textiles, supporting the facility’s operational requirements for durable and hygienic bedding solutions.

Nonwoven Fabric Mills

POSTED

DEADLINE

Quality Assurance and Compliance TestingThe contract involves independent testing and certification services focused on mattresses and pillows, ensuring they meet stringent standards for fire resistance, fluid resistance, durability, and overall consumer safety compliance. The scope of work is critical for maintaining quality assurance and regulatory adherence, specifically tailored for products used within the Graham Correctional Center. Designated as a subcontract under NAICS code 541380, this contract is set to be performed in Hillsboro, Illinois, with a completion timeline beginning after the posting date on December 3, 2025. The testing process will guarantee that these bedding products conform to applicable safety regulations, mitigating risks associated with fire hazards and contamination, while verifying product durability. The engagement highlights the agency's commitment to safety and quality in correctional facilities through rigorous certification standards.

Testing Laboratories and Services

POSTED

DEADLINE

Logistics, Delivery, and Inventory ManagementThe contract involves the transportation, final-mile delivery, and inventory management of mattresses and pillows specifically for the Graham Correctional Center warehouse. The delivery terms are FOB Destination, meaning the contractor is responsible for the goods until they reach the specified location at the correctional facility, located in Hillsboro, Illinois, zip code 62049. The contract falls under NAICS code 484220, which relates to specialized freight trucking services. This subcontract was posted on December 3, 2025, and managed by the Graham Correctional Center, an agency in Illinois. The contractor will be expected to handle not only the physical delivery but also proper inventory oversight to ensure the mattresses and pillows are accurately accounted for upon arrival and during storage at the facility. While no specific set-aside or subcontract type is detailed, the contract represents a logistical operation critical to supporting the correctional center’s supply chain needs.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Manufacture and Supply of Institutional PillowsThis contract involves the manufacture and supply of institutional pillows designed for use in correctional facilities, specifically for the Graham Correctional Center in Hillsboro, Illinois. The pillows must be durable and hygienic, incorporating fluid-resistant, antibacterial, and hypoallergenic materials to meet stringent state standards. The emphasis is on producing products that ensure safety, cleanliness, and comfort, suitable for institutional environments. The contract is a subcontract under the NAICS code 314910, which pertains to the manufacturing of household and institutional textiles. The delivery location is in Hillsboro, Illinois, with a focus on compliance with applicable health and safety regulations to meet the needs of the correctional facility. The solicitation was posted in early December 2025, positioning the vendor to provide specialized pillows that align with institutional requirements for durability and hygiene.

Textile Bag and Canvas Mills

POSTED

DEADLINE

Manufacture and Supply of Institutional MattressesThe contract involves the full manufacturing, quality control, packaging, and delivery of institutional-grade mattresses designed to meet specific state requirements for use at the Graham Correctional Center in Hillsboro, Illinois. These mattresses must comply with standards for durability, fire resistance, fluid resistance, and antibacterial properties, ensuring they are suitable for institutional settings such as correctional facilities. The contract falls under the NAICS code 339920, which pertains to manufacturing related to mattresses. The subcontract was posted on December 3, 2025, and the place of performance is designated as Hillsboro, IL 62049. While details such as solicitation number, contact information, and set-aside status are not provided, the scope clearly focuses on delivering mattresses that meet rigorous institutional and safety standards. The contract supports correctional facility needs by ensuring that all products will be manufactured and delivered according to stringent quality and safety guidelines.

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE