Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Installation and On-Site Integration Services

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the installation and on-site integration of 10 ligature-resistant lavatory and toilet units at the Graham Correctional Center in Hillsboro, Illinois. The scope includes all necessary plumbing connections, secure anchoring of the fixtures, and a comprehensive final inspection to confirm that the installations meet all relevant safety, performance, and code requirements. The work aligns with the industry standards under NAICS code 238220, which pertains to plumbing, heating, and air-conditioning contractors. The contract was posted on January 12, 2026, as a subcontract opportunity and focuses on enhancing safety within a correctional facility environment by addressing risks associated with ligature points. The final inspection and verification processes are critical components to ensure compliance and operational integrity of the installed units. Although specific agency office and point of contact details are not provided, the project is managed by the Illinois-based Graham Correctional Center, with the place of performance confirmed in Hillsboro, Illinois, 62049.

General Info

Install 10 ligature-resistant lavatories at Graham Correctional Center with plumbing, anchoring, inspection.

Agency

Illinois → Graham Correctional CenterView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Hillsboro, IL, 62049, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-426DOC-R-298063 / B-50552.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

26-426DOC-GRAHA-B-50552 | FY26 LAVATORY/TOILET COMBO UNITS

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJan 12

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyIllinois → Graham Correctional Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

Illinois → Graham Correctional Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of 10 ligature-resistant lavatory/toilet units, including plumbing connections, anchoring, and final inspection to ensure compliance with safety, performance, and code standards.

Similar Contracts

Same NAICS industry code

CBP5933 Bldg. 225 HVAC Replacement

Solicitation # CBP5933

Management & Training Corporation is seeking bids for a fixed-price, single lump sum subcontract to replace six split-system heat pump HVAC systems at the San Diego Job Corps Center in Imperial Beach, California. The project involves installing three 2-ton and three 1.5-ton Payne heat pump systems, including matching indoor air handlers, and requires the removal and disposal of old equipment. The estimated contract value ranges from 25,000 to 100,000 dollars, with a performance period of 30 consecutive business days following the written Notice to Proceed. Bids are due by September 11, 2026, and will be evaluated based on overall best value, considering price, quality, and delivery schedule. Eligible bidders include various small business categories, such as SDB, WOSB, HUBZone, and VOSB. Required submission documents include the MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, and a bid bond guarantee of at least 20 percent for bids equal to or exceeding 25,000 dollars. The contract is subject to the Davis-Bacon Act, requiring compliance with prevailing wage rates and federal energy efficiency standards. Additionally, awarded contractors must provide performance and payment bonds, maintain a Unique Entity ID, and adhere to FAR regulations regarding the Buy American Act and combating trafficking in persons. Final payment is contingent upon a successful final inspection and the submission of closeout documents, including certified payroll reports and operation and maintenance manuals.

San Diego Job Corps Center

POSTED

about 8 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is seeking bids for a subcontracting opportunity to provide smoke detector installation and fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. This solicitation, identified as RFQ 7593, is open to various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses, under NAICS code 238220. Interested bidders must submit their response by September 18, 2026, at 3:00 PM PST, and are encouraged to attend a pre-bid meeting on September 11, 2026. Required submission documents include a bid sheet, proof of insurance, and a completed supplier self-certification packet including an IRS W-9. The contract mandates strict adherence to federal labor and regulatory standards, specifically requiring compliance with Service Contract Labor Standards and Wage Determination No. 2015-5595 Revision 28 for Washoe and Storey counties. Key FAR clauses are incorporated, including those regarding the prohibition of segregated facilities, combating trafficking in persons, and specific security and privacy requirements. Subcontractors with awards exceeding 30,000 dollars must disclose their debarment and suspension status. Payment is processed upon the submission of invoices for accepted materials or services, and the contract allows MTC or the government to inspect work at any reasonable time to ensure materials are merchantable and fit for their intended purpose.

Sierra Nevada Job Corps Center

POSTED

about 8 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management and Training Corporation is seeking fixed-price lump sum bids for a subcontracting opportunity to perform HVAC replacement services for Building E8 Welding at the Clearfield Job Corps Center, located at 20 West 1700 South, Clearfield, Utah. This solicitation, identified as 2026-clearfield-bldg-e8-welding-hvac, is open to various small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses, under NAICS code 238220. The response deadline for bids is September 19, 2026. The project requires adherence to the provided scope of work and compliance with Davis-Bacon prevailing wage rates as specified in General Decision UT20250083 for Davis County. Bidders must provide a detailed bid breakout and are required to meet specific insurance, reference, and bonding requirements, including both bid and performance/payment bonds. Interested parties must complete the supplier onboarding process, which includes submitting a Supplier Self-Certification form and a current IRS Form W-9. Primary contact for this opportunity is Patricia Willover.

Management & Training Corporation

POSTED

about 8 hours ago

DEADLINE

Joliet JCC Sewer Vent Repairs

Solicitation # Joliet JCC Sewer Vent Pipe Repair

This is a subcontracting opportunity with Management and Training Corporation for sewer vent pipe repairs at the Joliet Job Corps located at 1101 Mills Road in Joliet, Illinois. The project falls under NAICS code 238220 and is open to various small business set-asides, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their bids by September 11, 2026, at 3:00 PM CT. The contract requires adherence to the Service Contract Labor Standards and specifically follows Wage Determination 2015-5019 Revision 31 for the counties of Grundy, Kendall, and Will. Bidders must provide required response documents and comply with insurance, indemnification, and FFATA reporting requirements. The primary point of contact for this solicitation is Fran McGraw.

MTC Joliet Job Corps

POSTED

about 8 hours ago

DEADLINE

RFQ#3191 Laundry Tray Installations

Solicitation # RFQ#3191

Management & Training Corporation (MTC) is seeking bids under RFQ 3191 for a subcontracting opportunity to provide plumbing services at the Charleston Job Corps Center in Charleston, West Virginia. The project requires the contractor to provide all labor, materials, and supervision to remove existing units and install new laundry trays and faucet sets in the Men's and Women's CTT and Education restroom areas. All installations must be performed on Everform Graphite Terrazzo Matrix counter tops and must comply with local plumbing codes and Job Corps facility standards. The contractor is responsible for testing all fixtures for proper water flow, leak prevention, and drainage functionality, ensuring all connections are watertight and the work area is cleared of all debris upon completion. This is a fee-for-service contract awarded on a lump sum basis, with MTC serving as the sole judge of best value. The opportunity is open to various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB, under NAICS code 238220. Bids must be submitted via email to Wendy Lawrence by 3:00 PM EST on September 11, 2026. Required submission documents include a bid sheet, a completed supplier packet with a W-9 and self-certification form, proof of insurance, and three references for similar projects. The contract is subject to Service Contract Act prevailing wages, the Contract Work Hours and Safety Standards Act, and FAR 52.204-10 reporting requirements for projects valued at 40,000 dollars or more.

Management & Training Corporation

POSTED

about 8 hours ago

DEADLINE

Replace Shower Diverters in two (2) Dorms

Solicitation # replace-shower-diverters-two-2-dorms

This contract involves the removal and replacement of shower diverters in eight bathrooms across two dorm buildings in Indiana. The scope of work includes replacing existing Powers brand diverters with Delta or comparable models featuring readily available parts, as well as repairing or replacing any deteriorated piping leading into the diverters. The project is open to various small business set-asides, including SDB, WOSB, HUBZone, and veteran-owned businesses. A site visit is scheduled for September 1, 2026, at 10:30 AM, and all proposals must be submitted via email to Tammy Swallows by September 14, 2026, at 3:00 PM.

Adams & Associates

POSTED

about 8 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

Serrato Corporation is seeking a subcontractor to replace a failing air-cooled chiller at the North Texas Job Corps Center in McKinney, Texas, specifically within Building 214/215. The project requires the installation of a like-kind, similar model replacement for a 246-ton Carrier chiller using R-134A refrigerant. The scope of work extends beyond the chiller installation to include the demolition and disposal of the existing unit, the installation of a JACE 9000 central integration point for building automation controls, and the installation of three-way control valves for four air handling units. Additionally, the contractor must clean and inspect four air handling units and replace three of the four existing variable frequency drives. Bids are due by September 18, 2026, and must remain valid for 90 days. Submissions must include manufacturer equipment specifications, a Certificate of Liability Insurance naming Serrato Corporation as the holder, and Form 1413 for Davis-Bacon Act certified payroll compliance for work exceeding 2,000 dollars. Insurance requirements include a minimum of 1 million dollars for commercial general liability and 500,000 dollars for employers liability. The selected contractor will be responsible for performing startup and operational tests for the chiller and ensuring the proper operation of all air handling units before final acceptance. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 8 hours ago

DEADLINE

Joliet JCC Grease Pipe Repairs

Solicitation # Joliet JCC Grease Line Repair

This is a subcontracting opportunity with Management and Training Corporation for grease pipe repairs at the Joliet Job Corps Center located in Joliet, Illinois. The scope of work involves the removal and temporary storage of existing sinks and tables to access the work area, followed by the furnishing and installation of new grease waste piping to replace a failed section. The contract is a fee-for-service arrangement based on a lump sum bid. Award decisions will be based on the best value as determined by MTC. The solicitation is open to various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB, under NAICS code 238220 with a size standard of 19 million dollars. Bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, three references for similar projects, and proof of insurance by September 11, 2026. Compliance requirements include adherence to Wage Determination 2015-5019 Revision 31, Department of Labor privacy and records management standards, and specific FAR clauses regarding safety, trafficking in persons, and minimum wages. Additionally, the contractor must provide manufacturer and installer warranties on company stationery and comply with strict information security and confidentiality protocols.

MTC Joliet Job Corps

POSTED

about 8 hours ago

DEADLINE

RFQ#8911 Fire Suppression System Repairs

Solicitation # CBP#8911

Management & Training Corporation (MTC) is seeking a subcontractor for fire suppression system repairs at the Edison Job Corps Center in Edison, New Jersey, under solicitation RFQ#8911. This fixed-price, single lump sum contract requires the provider to supply all labor, materials, equipment, and supervision to restore systems to full operational condition. The scope of work includes repairing fire backflow preventer assemblies in the Culinary Building, replacing deteriorated sprinkler piping in the Women's Dormitory, and repairing fire suppression systems in the Wellness Center. All work must adhere to NFPA standards, state and local fire codes, OSHA requirements, and manufacturer specifications. Deliverables include hydrostatic re-testing, inspection reports, and two sets of operation and maintenance manuals. Bids will be evaluated based on overall best value, and a physical site visit is mandatory prior to submission. The opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB, under NAICS code 238220. For bids equal to or exceeding 25,000 dollars, a bid bond of 20 percent is required, along with performance and payment bonds from a surety company with at least an A- rating. The project is subject to Construction Wage Rate Requirements, necessitating compliance with New Jersey prevailing wage determinations and weekly certified payroll reporting. Additionally, contractors must provide a UEI number and complete the MTC Supplier Packet, including W-9 and self-certification forms. For contracts valued at 40,000 dollars or more, reporting requirements under FAR 52.204-10 regarding executive compensation and first-tier subcontract awards apply.

Management & Training Corporation

POSTED

about 8 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02, managed by PTSI Managed Services Inc. for the FAA, involves HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska. The scope of work includes the replacement of the FSS chiller, four AC units, and chilled-water piping, along with the upgrade of associated electrical systems, specifically modifying Panel P1 and HVAC circuits. To maintain operational continuity, the contractor must provide temporary and redundant cooling throughout the construction process. The project concludes with system startup, testing, commissioning, FAA training, and the completion of all punch-list items. This small business set-aside opportunity falls under NAICS code 238220 and has an estimated construction magnitude between 250,000 and 500,000 dollars. The solicitation was posted on September 6, 2026, with a response deadline of September 25, 2026, and a proposed project start date of April 15, 2027. Primary coordination for the project is handled by Masanori Akers.

PTSI Managed Services Inc.

POSTED

about 8 hours ago

DEADLINE

WOJC - Replacement of Condensing Unit and Evaporator Coil – Walk-In Freezer

Solicitation # wojc-replacement-condensing-unit-evaporator-coil-walk-freezer

The Westover Job Corps Center, managed by ETR, is seeking quotes for a subcontracting opportunity to decommission and replace a fire-damaged condensing unit and evaporator coil for a walk-in freezer in Chicopee, Massachusetts. The project requires all work to be performed by Massachusetts-licensed electricians and refrigeration technicians in compliance with the 2023 Massachusetts Electrical Code and the 780 CMR 13.00 Energy Code. Bidders must provide a detailed cost breakdown, a proposed service schedule, and all required licensing and credentials. The bid closes on September 11, 2026, and quotes must remain valid for at least 90 days from submission. To be eligible for award, contractors must submit a completed bid sheet, a W-9, a Vendor Acknowledgement Form, and applicable certificates of insurance. The winning bidder must possess an active SAM.gov registration and a Unique Entity ID. Award selection is at the sole discretion of ETR and is not based solely on the lowest bid. The contract incorporates various FAR clauses, including those regarding the Davis-Bacon Act, Service Contract Act, and Buy American requirements. Final payment is contingent upon the submission of a signed punch list and applicable warranties. Bonding is required for construction projects exceeding 35,000 dollars, with specific performance and payment bond requirements scaling up to projects over 150,000 dollars.

Westover Job Corps Center

POSTED

about 8 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center in New York is seeking qualified contractors for project S26-010, which involves the replacement and installation of HVAC equipment serving Main Building No. 1, Wing 5. The scope of work includes replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the project requires the installation of four 2-ton ductless mini-split heat pump systems, the removal of a window air-conditioning unit, and the abandonment of two 5-ton rooftop units. Comprehensive associated tasks include demolition, roof curb and penetration work, ductwork, refrigerant and condensate piping, electrical and fire alarm integration, structural roof evaluations, and full system commissioning. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Eligible contractors must be licensed in New York State and comply with all applicable codes and safety requirements. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, vendor questions due by September 14, 2026, and final proposals due by September 21, 2026, at 4:00 PM ET.

Adams and Associates, Inc.

POSTED

about 8 hours ago

DEADLINE

More opportunities from Illinois → Graham Correctional Center

Same awarding agency

Quality Assurance and Warranty Compliance ServicesThis contract involves comprehensive post-installation inspection, testing, and warranty support services for lavatory and toilet units installed at the Graham Correctional Center in Hillsboro, Illinois. The scope includes ensuring that all units meet quality standards and comply with applicable requirements, addressing any defects or issues that arise during the warranty period. The contractor is responsible for managing defect resolution and verifying compliance, thereby supporting ongoing maintenance and functionality of the lavatory equipment. The agreement mandates a three-year record retention period for all documentation related to inspections, testing results, warranty claims, and defect resolutions. This emphasizes the importance of accountability and traceability throughout the contract duration. The contract falls under the NAICS code 811490, which pertains to general maintenance and repair services, and is structured as a subcontract opportunity posted in January 2026. The primary location for performance is Hillsboro, Illinois, serving the needs of the Illinois Department of Corrections facility.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Delivery and Handling Services for Plumbing FixturesThe contract involves the transportation and on-site handling of ten lavatory/toilet combination units to Graham Correctional Center in Hillsboro, Illinois. It includes responsibilities such as secure packaging, freight management, unloading, and the precise placement of the fixtures at the installation site. This ensures the units are delivered safely and positioned correctly for immediate use or installation. This subcontract is categorized under the NAICS code 484220, which covers specialized freight trucking services. The contracting agency is Graham Correctional Center, and the services are to be performed at their facility located in the 62049 zip code. The contract was posted on January 12, 2026, and emphasizes careful logistics coordination to meet the needs of the correctional facility while adhering to secure handling protocols.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Ligature-Resistant Lavatory/Toilet Combo Units SupplyThis contract involves the procurement of 10 ligature-resistant lavatory/toilet combo units, specifically designed for installation in a correctional facility operated by the Graham Correctional Center in Hillsboro, Illinois. The order includes an equal split of 5 left-hand and 5 right-hand units, ensuring versatility in placement within the facility. The primary requirements emphasize durability, security, and adherence to safety standards, with an additional mandate that the units meet WaterSense efficiency criteria to promote water conservation. The solicitation falls under NAICS code 332410, indicating it pertains to metal product manufacturing. While the exact solicitation number and set-aside details are not provided, the contract is designated as a subcontract and was posted on January 12, 2026. The focus is on delivering high-quality, tamper-resistant fixtures that enhance inmate safety while aligning with environmental sustainability through water efficiency. The place of performance is fixed at the correctional center’s location in Hillsboro, zip code 62049, emphasizing local installation and use within the Illinois correctional system.

Power Boiler and Heat Exchanger Manufacturing

POSTED

DEADLINE

Freight & Delivery Services (F.O.B. Destination)This contract involves the transportation and delivery of large rolls of protective fabric, each being 86 inches wide and at least 100 yards in length, destined for the warehouse of a correctional facility. The delivery is to be executed under F.O.B. Destination terms, meaning the contractor is responsible for all transportation costs and risks until the fabric reaches the specified location safely. The contract is identified as a subcontract under the NAICS code 484220, which pertains to freight and delivery services. The placing agency for this contract is the Graham Correctional Center located in Illinois, with the place of performance specified as Hillsboro, ZIP code 62049. The solicitation was posted on January 12, 2026, and while some organizational details and point of contact information were not provided, the key requirement is the reliable and timely freight delivery of these specific large fabric rolls to the correctional facility's warehouse. This service is critical to ensure proper inventory and facility operations at the correctional center.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Quality Testing & Certification ServicesThis contract involves independent laboratory services to conduct quality testing and certification to ensure products meet specific industry standards. The testing focuses on evaluating tear strength, flame resistance, and antibacterial performance in compliance with ASTM, AATCC, and NFPA standards. The objective is to verify that materials or products meet these rigorous performance criteria to support safety and quality assurance requirements. The contract is a subcontract opportunity issued by the Graham Correctional Center in Illinois, with the place of performance located in Hillsboro, ZIP code 62049. Classified under the NAICS code 541380, the contract seeks expertise in scientific testing and analysis related to textiles and materials. Although specific solicitation details such as set-asides or contact points are not provided, the contract is publicly posted as of January 12, 2026, on the state's procurement platform, inviting qualified laboratories to participate in the evaluation process.

Testing Laboratories and Services

POSTED

DEADLINE

Raw Material Supply (PVC Coating & Polyester Scrim)This contract involves the supply of raw materials specifically 2.5 oz. 100% polyester Rochelle Knit scrim combined with a heavy-metal-free clear PVC coating. These materials are intended for the production of laminated protective fabric, which suggests a focus on durable, protective textile products. The contract is designated as a subcontract and falls under the NAICS code 313221, relating to textile and fabric mills. The contract is issued by the Graham Correctional Center in Illinois, with the place of performance located in Hillsboro, Illinois, ZIP code 62049. Details such as solicitation number, set-aside status, and point of contact are not provided. The emphasis on heavy-metal-free PVC coating highlights environmental and health considerations, ensuring safe use in the laminated fabric manufacturing process.

Narrow Fabric Mills

POSTED

DEADLINE

Protective Fabric Manufacturing (Institutional Grade)This contract involves the manufacture and supply of an 11-ounce double-coated, 3-ply vinyl-polyester laminate fabric specifically designed for institutional mattress covers. The fabric is characterized by its enhanced tear strength, antibacterial properties, and flame retardant capabilities, making it suitable for use in environments requiring durable and safety-compliant materials. The contract is classified under NAICS code 313230, which pertains to fabric manufacturing, and is issued by the Graham Correctional Center in Illinois. The production and delivery of the fabric are to be carried out in Hillsboro, where the place of performance is located. This subcontract, posted in January 2026, aims to fulfill the material needs of correctional facility mattress covers, ensuring both functional and safety standards are met through the specified material features. The contract details indicate a focus on protective institutional-grade textiles, supporting the facility’s operational requirements for durable and hygienic bedding solutions.

Nonwoven Fabric Mills

POSTED

DEADLINE

Quality Assurance and Compliance TestingThe contract involves independent testing and certification services focused on mattresses and pillows, ensuring they meet stringent standards for fire resistance, fluid resistance, durability, and overall consumer safety compliance. The scope of work is critical for maintaining quality assurance and regulatory adherence, specifically tailored for products used within the Graham Correctional Center. Designated as a subcontract under NAICS code 541380, this contract is set to be performed in Hillsboro, Illinois, with a completion timeline beginning after the posting date on December 3, 2025. The testing process will guarantee that these bedding products conform to applicable safety regulations, mitigating risks associated with fire hazards and contamination, while verifying product durability. The engagement highlights the agency's commitment to safety and quality in correctional facilities through rigorous certification standards.

Testing Laboratories and Services

POSTED

DEADLINE

Logistics, Delivery, and Inventory ManagementThe contract involves the transportation, final-mile delivery, and inventory management of mattresses and pillows specifically for the Graham Correctional Center warehouse. The delivery terms are FOB Destination, meaning the contractor is responsible for the goods until they reach the specified location at the correctional facility, located in Hillsboro, Illinois, zip code 62049. The contract falls under NAICS code 484220, which relates to specialized freight trucking services. This subcontract was posted on December 3, 2025, and managed by the Graham Correctional Center, an agency in Illinois. The contractor will be expected to handle not only the physical delivery but also proper inventory oversight to ensure the mattresses and pillows are accurately accounted for upon arrival and during storage at the facility. While no specific set-aside or subcontract type is detailed, the contract represents a logistical operation critical to supporting the correctional center’s supply chain needs.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Manufacture and Supply of Institutional PillowsThis contract involves the manufacture and supply of institutional pillows designed for use in correctional facilities, specifically for the Graham Correctional Center in Hillsboro, Illinois. The pillows must be durable and hygienic, incorporating fluid-resistant, antibacterial, and hypoallergenic materials to meet stringent state standards. The emphasis is on producing products that ensure safety, cleanliness, and comfort, suitable for institutional environments. The contract is a subcontract under the NAICS code 314910, which pertains to the manufacturing of household and institutional textiles. The delivery location is in Hillsboro, Illinois, with a focus on compliance with applicable health and safety regulations to meet the needs of the correctional facility. The solicitation was posted in early December 2025, positioning the vendor to provide specialized pillows that align with institutional requirements for durability and hygiene.

Textile Bag and Canvas Mills

POSTED

DEADLINE

Manufacture and Supply of Institutional MattressesThe contract involves the full manufacturing, quality control, packaging, and delivery of institutional-grade mattresses designed to meet specific state requirements for use at the Graham Correctional Center in Hillsboro, Illinois. These mattresses must comply with standards for durability, fire resistance, fluid resistance, and antibacterial properties, ensuring they are suitable for institutional settings such as correctional facilities. The contract falls under the NAICS code 339920, which pertains to manufacturing related to mattresses. The subcontract was posted on December 3, 2025, and the place of performance is designated as Hillsboro, IL 62049. While details such as solicitation number, contact information, and set-aside status are not provided, the scope clearly focuses on delivering mattresses that meet rigorous institutional and safety standards. The contract supports correctional facility needs by ensuring that all products will be manufactured and delivered according to stringent quality and safety guidelines.

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE

26-426DOC-GRAHA-B-50152 | IDOC Mattress/Pillow Manufacturing Supplies

Solicitation # 26-426DOC-GRAHA-B-50152

Solicitation 26-426DOC-GRAHA-B-50152 is an Invitation for Bid issued by the Illinois Department of Corrections for a three-year contract to supply mattress and pillow manufacturing materials to the Graham Correctional Center Industries in Hillsboro, Illinois. The scope of work includes the procurement of pillow inserts, airstring fiber mattress cores, poly-foam mattress cores, and various vinyl covering materials. All covering materials must be RF heat sealable and compatible with the state's specific equipment. A key technical requirement is compliance with NFPA 701 and CFR 1632 flame-retardancy standards, as clarified in Amendment 1. The contract will be awarded to the responsive and responsible bidder offering the lowest line-item price. Bidders must submit all proposals electronically via the BidBuy portal and provide samples for technical testing and approval prior to the award. Delivery is required on an FOB Destination basis to the Graham Correctional Center ICI Warehouse, with a required delivery window of 30 days from the receipt of an order. Vendors must maintain comprehensive insurance coverage, including general commercial liability of 1 million dollars per occurrence and 2 million dollars aggregate, as well as auto liability and worker's compensation. Mandatory submissions include the Illinois Vendor Disclosure Form or the IPG Active Registered Vendor Disclosure form. The contract includes standard state protections, such as indemnification of the State of Illinois, adherence to prevailing wage laws, and a twelve-month warranty on all supplies to ensure they are free from defects and of good workmanship.

Mattress Manufacturing

POSTED

DEADLINE