Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

3-D Tomographer Installation and Commissioning

Active

State & Local

Response Deadline10/29/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Texas A&M University involves the on-site installation and commissioning of 3-D Tomography systems for prime contractors working on agency scientific equipment projects. The selected provider will be responsible for the physical installation, system configuration, and final commissioning to ensure the equipment is fully operational and ready for use. The project falls under NAICS code 811210 and requires the contractor to provide a Certificate of Insurance naming the organization as an additional insured. Interested parties must respond by October 29, 2026, to deliver a fully installed and operational 3-D Tomographer.

General Info

Install and commission 3-D Tomography systems for Texas A&M by October 29, 2026.

Agency

Texas A&M University

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of TTI-ITB-1500.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

3D Tomographer

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 21

subcontract

Response DeadlineOct 29

Submission deadline

Response Deadline

10/29/2026, 07:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas A&M University

ContactsNo contacts available

OfficeN/A

Organization / AgencyTexas A&M University

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs on-site installation and setup of 3-D Tomography systems for prime contractors on agency scientific equipment projects. Executes physical installation, system configuration, and commissioning to ensure operational readiness. Requires a Certificate of Insurance (COI) naming the organization as an additional insured. Delivers a fully installed and operational 3-D Tomographer.

Similar Contracts

Same NAICS industry code

G15-703408 - Vsign Annual Service

Solicitation # SRC0000037275

This solicitation, identified as G15-703408, is issued by the Alabama Department of Transportation, G15 Transportation Planning, for annual Vsign service and hardware maintenance for CCS sites. The contract is governed by the State of Alabama Office of the Chief Procurement Officer's Standard Terms and Conditions for Quick Quotes. The total contract value is capped at 25,000 dollars, covering the original agreement and any subsequent renewals. The period of performance allows for annual renewals by written agreement of both parties for a maximum total duration of five years from the effective date. Suppliers must submit responses electronically through the Alabama Buys portal by the deadline of October 26, 2026. Key requirements for bidders include certifications of tax compliance pursuant to Section 41-4-142 of the Code of Alabama 1975 and certification that the entity and its principals are not debarred or suspended from government participation. The contract stipulates that the supplier acts as an independent contractor and agrees to the jurisdiction of the City of Montgomery for any legal disputes. Additionally, the state reserves the right to request professional licenses, insurance certificates, or manufacturer authorizations following the bid opening.

Alabama Department of Transportation, G15 Transportation Planning

POSTED

about 20 hours ago

DEADLINE

SKID Truck and Pavement Sensor CalibrationThis subcontract involves the calibration of Force Plate SKID trucks and pavement sensors to support prime contractors on Texas Department of Transportation pavement testing projects. The primary objective is to ensure the measurement accuracy of data collection equipment and sensors used for evaluating road conditions, with the final deliverables consisting of calibrated equipment and formal certification reports. The opportunity is categorized under NAICS code 811210 and is associated with the Texas Department of Transportation. Interested parties should note that the response deadline is November 4, 2026, following a posting date of October 21, 2026.

Texas Department of Transportation

POSTED

about 20 hours ago

DEADLINE

MFP Maintenance and Repair ServicesThis subcontract for MFP Maintenance and Repair Services supports prime contractors managing print projects for the City of Dothan in Alabama. The scope of work involves performing both preventive and corrective maintenance on multi-function printers, including on-site repairs and the provision of loaner or replacement units within 24 hours if a device cannot be fixed immediately. The service provider is required to use diagnostic tools to maintain a strict hardware fleet standard, ensuring a minimum uptime of 98% per device each quarter. This contract emphasizes strict adherence to service level agreement uptime guarantees to ensure continuous operational efficiency for the agency.

POSTED

about 21 hours ago

DEADLINE

Flap Skew Detection Unit Overhaul ServicesThis subcontract for Flap Skew Detection Unit Overhaul Services involves performing comprehensive teardown, evaluation, repair, and reassembly of specialized units for prime contractors supporting NAVSUP Weapon System Support projects. The scope of work includes disassembling units, cleaning and inspecting components according to approved repair manuals, and replacing any parts that exceed established limits. To ensure quality and functionality, the contractor must utilize provided fixtures, jigs, and test equipment to verify that each unit reaches Ready for Issue status. All work must be performed in strict compliance with IPC/EIAJ-STD-001C and MIL-STD-454 standards. The project is based in Philadelphia and falls under NAICS code 811210. The final deliverable for this Department of Defense effort is a certified Ready for Issue unit.

Navsup Weapon Systems Support

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Repair and Modification of Thrust Shoe w/InstrThis subcontract involves the teardown, evaluation, repair, and modification of Thrust Shoe w/Instr (NSN 016233028) for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The selected provider must be an authorized distributor of the original manufacturer and is required to disassemble and assess assets using precision tooling and technical orders in accordance with CAGE 75333 and Ref No. 482480-008. The primary objective is the delivery of a fully repaired and modified asset that meets all specified functional requirements. This opportunity falls under NAICS code 811210, with a response deadline set for November 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 24 hours ago

DEADLINE

Precision Cleaning and Testing (MIL-STD-1330)This subcontract involves providing precision cleaning and testing services for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work focuses on executing Oxygen Clean processes for various shipboard components, including those used in oxygen, helium, helium-oxygen, nitrogen, and hydrogen systems. The contractor must utilize certified precision cleaning facilities to ensure the total absence of contaminants in accordance with MIL-STD-1330 standards. The final deliverables include certified Oxygen Clean filter components accompanied by formal certification of cleanliness. This opportunity falls under NAICS code 811210.

Navsup Weapon Systems Support Mech

POSTED

about 24 hours ago

DEADLINE

Motorola Astro Core P25 Specialized Maintenance & RepairThis subcontract opportunity is for the Motorola Astro Core P25 Specialized Maintenance and Repair project supporting the Department of Veterans Affairs at the Palo Alto Health Care System. The selected contractor will be responsible for performing both regular preventative maintenance and emergency repairs on the Motorola Astro Core P25 radio infrastructure to ensure continuous system functionality. A critical requirement of the contract is the provision of 24/7 emergency callback support with a mandatory three-hour response time, resulting in a fully operational communication system and detailed maintenance logs. The procurement is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 811210. Managed by the Network Contract Office 21, the project is located in Palo Alto. Interested parties must submit their responses by November 4, 2026.

261-NETWORK Contract Office 21 (36C261)

POSTED

about 24 hours ago

DEADLINE

Alcon Constellation LXT & Embedded Laser Maintenance ServicesThis subcontract involves providing specialized maintenance services for Alcon Constellation LXT Phacoemulsification units and embedded lasers at the Long Beach VA Medical Center. The scope of work includes performing preventative maintenance inspections according to OEM frequencies, executing corrective repairs, providing technical support, and installing necessary software updates. To ensure operational readiness and regulatory compliance, the contractor must provide 24-hour on-site response times and deliver service reports that meet Joint Commission standards. The project is managed under the Department of Veterans Affairs, specifically through Network Contract Office 22. Qualified providers must utilize Alcon-certified technicians with a minimum of two years of experience. The contract falls under NAICS code 811210 and is designated for performance in Long Beach, California.

262-NETWORK Contract Office 22 (36C262)

POSTED

about 24 hours ago

DEADLINE

Digital Computer Depot-Level RepairThis subcontract for Digital Computer Depot-Level Repair involves the physical repair and testing of C-5 Digital Computer units to support prime contractors on US Air Force projects. The scope of work includes executing depot-level hardware and software repairs utilizing specialized test benches and diagnostic software to ensure all units meet strict interface requirements. Additionally, the contractor is responsible for configuration management to track the status of all repairs and must deliver fully functional, tested computer units. The project is managed under the Department of Defense through agency FA8538 Afsc Pzaab, with performance taking place in Warner Robins, Georgia. Interested parties must ensure compliance with DFARS 252.204-7012 regulations. The opportunity was posted on October 21, 2026, with a response deadline of November 20, 2026, falling under NAICS code 811210.

FA8538 Afsc Pzaab

POSTED

about 24 hours ago

DEADLINE

F-15 DMS Processor and Cartridge RepairThis subcontract, titled F-15 DMS Processor and Cartridge Repair, involves the testing and repair of specialized avionics processing units and data cartridges for prime contractors supporting Air Force Sustainment Center F-15 Digital Mapping System projects. The scope of work specifically includes the maintenance of Advanced Display Core Processors, Digital Map Processors, Mission Cartridges, and Theatre Cartridges. To successfully deliver these fully repaired and tested components, the contractor must utilize specialized test equipment and maintain access to production-level technical data. Managed by the Department of Defense under agency FA8538 Afsc Pzaab, the work is designated under NAICS code 811210 and will be performed in Warner Robins. The opportunity was posted on October 21, 2026, with a response deadline of November 5, 2026.

FA8538 Afsc Pzaab

POSTED

about 24 hours ago

DEADLINE

Belimed Sterilizer and Washer Preventive Maintenance & Repair (PM&R)This subcontract involves providing planned maintenance inspections and corrective repair services for SteelcoBelimed sterilizers and washers at the VA Southern Arizona Health Care System. The selected vendor must be a certified Belimed provider capable of using OEM-specific diagnostic tools to ensure all equipment meets manufacturer specifications. Key deliverables include the restoration of fully operational equipment, detailed maintenance logs, and comprehensive service reports. Managed under the Department of Veterans Affairs Network Contract Office 22, the project falls under NAICS code 811210. The opportunity was posted on October 21, 2026, with a response deadline of October 28, 2026. The contractor will work as a subcontractor to prime contractors to maintain critical sterilization and washing infrastructure.

262-NETWORK Contract Office 22 (36C262)

POSTED

about 24 hours ago

DEADLINE

UHF DMR Tier III System Maintenance ServicesThis subcontract for the Department of Veterans Affairs involves providing comprehensive maintenance, semiannual preventive services, and unscheduled repairs for UHF DMR Tier III systems within VA healthcare facilities. The scope of work includes the testing, calibration, and troubleshooting of Avtec radio communications systems as well as Tait repeaters and Motorola MOTOTRBO portable and mobile radios. To ensure system integrity, the contractor must provide factory-trained technicians who possess direct access to original equipment manufacturer software and calibration tools. The primary objective is to deliver a fully operational UHF DMR system supported by detailed maintenance logs. This opportunity falls under NAICS code 811210 and is managed by the Network Contract Office 8. Interested parties should note the response deadline of October 28, 2026.

248-NETWORK Contract Office 8 (36C248)

POSTED

about 24 hours ago

DEADLINE

More opportunities from Texas A&M University

Same awarding agency

Specialized Laboratory Equipment TransportThis subcontract for Specialized Laboratory Equipment Transport involves the hauling of sensitive scientific instruments for prime contractors supporting Texas A&M University Galveston procurement projects. The scope of work specifically requires the loading, transport, and unloading of a spectroscopic analyzer, ensuring safe delivery to the designated campus location. The contractor is responsible for managing F.O.B. Destination logistics and serving as the importer of record for all international shipments. This project falls under NAICS code 484220, with a response deadline set for November 4, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

Advanced Spectroscopic Oil Analyzer SupplierThis subcontract agreement involves the procurement of one Advanced Spectroscopic Oil Analyzer for laboratory projects at Texas A&M University Galveston. The selected supplier is responsible for manufacturing or sourcing the equipment according to strict technical specifications and ensuring the delivery of a fully functional unit. Beyond equipment delivery, the supplier must manage critical regulatory requirements, including the provision of export control classifications such as ECCN, HTS, and USML categories. Additionally, the supplier is tasked with managing all importer of record obligations for any components or units sourced internationally.

Analytical Laboratory Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

Heavy Equipment Transport and DeliveryThis subcontract for Heavy Equipment Transport and Delivery involves the specialized hauling of heavy industrial equipment for prime contractors working on Texas A&M University projects. The scope of work specifically requires the loading, transporting, and unloading of 8,000-lb capacity forklifts to designated locations on the university campus in College Station, Texas. To fulfill the contract requirements, the provider must utilize flatbed trucks or specialized heavy-equipment trailers operated by CDL licensed drivers to ensure safe delivery. Interested parties should note that the response deadline is November 4, 2026, and the project falls under NAICS code 484220.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

8,000-lb Capacity Forklift SupplierThis subcontract agreement establishes the procurement of industrial forklifts with an 8,000-lb capacity to support prime contractors working on equipment projects at Texas A&M University. The selected supplier is responsible for providing and delivering equipment that meets these specific capacity requirements to the university campus located in College Station, Texas. To be eligible for this contract, the provider must be an authorized manufacturer or dealer of the equipment supplied. The scope of work concludes upon the delivery and formal acceptance of the completed forklift units. Interested parties must adhere to the response deadline of November 4, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

Forklift, 8000-lb capacity

Solicitation # TAMU-ITB-27-5132

Texas A&M University is soliciting bids under solicitation number TAMU-ITB-27-5132 to establish a Master Order for an 8,000-lb capacity forklift. The equipment is intended for use at the university campus located in College Station, Texas. All detailed technical specifications and requirements are provided as attachments within the AggieBid portal. Interested respondents must submit their proposals electronically through the AggieBid system by the deadline of November 4, 2026, at 2:00 PM CST. The primary point of contact for this procurement is Jim Nelms. No specific contract value, delivery schedule, or evaluation factors were detailed in the primary solicitation documents.

POSTED

about 17 hours ago

DEADLINE

Advanced Spectroscopic Oil Analyzer

Solicitation # TAMUG-ITB-27-0125

Texas A&M University Galveston is soliciting bids for the procurement and delivery of one Advanced Spectroscopic Oil Analyzer to be delivered to the university campus in Galveston, Texas. This Invitation to Bid, identified as TAMUG-ITB-27-0125, was posted on October 21, 2026, with a response deadline of November 4, 2026, at 2:00 PM CST. Bidders are required to submit detailed product specifications and descriptive literature to avoid disqualification. Submissions should be made electronically via the AggieBid portal, though hand delivery to College Station is permitted provided a W9 and official Texas A&M forms are included. The contract mandates strict adherence to specific shipping and payment terms. All deliveries must be F.O.B. Destination, Freight Prepaid and Allowed, with the vendor assuming all costs and responsibilities for delivery, including the prohibition of additional fuel or handling surcharges. Payment is set at 100% Net 30 upon receipt and acceptance of the equipment and an uncontested invoice. For equipment sourced internationally, vendors must confirm their status as the importer of record and provide export classifications, including ECCN, HTS, and USML categories. Additionally, any tariff, duty, or customs-related charges must be itemized separately from the unit price of the analyzer.

POSTED

about 17 hours ago

DEADLINE

3-D Tomographer Supply (MIRA 3D Pro or Equivalent)This subcontract agreement with Texas A&M University involves the supply of a 3-D Tomographer system, specifically a MIRA 3D Pro or an equivalent model, for use by prime contractors on agency scientific equipment projects. The scope of work includes the delivery of one hardware unit and its associated software, with a requirement for the software components to include a Voluntary Product Accessibility Template. Additionally, the provider must identify the relevant Export Control Classification Number or USML categories for the equipment. The contract includes a 12-month warranty that covers both parts and labor to ensure operational reliability. This procurement falls under NAICS code 334516, with a response deadline set for October 29, 2026.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Solicitation # TTI-ITB-1500

Texas A&M University has issued solicitation TTI-ITB-1500 as an Invitation for Bid for a 3D Tomographer. The agency is specifically seeking the MIRA 3D Pro Shear Wave 3-D Tomographer, though equivalent models will be considered if the vendor provides a manufacturer name, model number, and detailed specification sheets for agency evaluation. All submitted equipment must include a minimum twelve-month warranty covering parts and labor against defective materials and workmanship. Bidders must submit their responses through the AggieBid online portal by October 29, 2026, at 2:00 PM CDT. Key compliance requirements include providing a Voluntary Product Accessibility Template for any software, identifying export control classifications under ITAR or EAR, and demonstrating the ability to meet specific insurance requirements. Additionally, vendors must provide certifications regarding lobbying, Executive Order GA-48, and HB 127 regarding prohibited software. The contract is subject to the availability of funds appropriated by the Texas Legislature, and the primary point of contact for this procurement is Mary Williams.

POSTED

DEADLINE

Monorail System FabricationThis subcontract for Monorail System Fabrication supports prime contractors on the Texas A&M University BAM Range Phase II projects. The scope of work involves the fabrication and supply of structural steel rails, trolleys, and support structures, as well as the assembly of the transport mechanism. All work must be performed using rail alignment tools in strict accordance with Specialized Vessel Fabrication Specifications to deliver a fully completed monorail system. The opportunity is categorized under NAICS code 333923 and was posted on October 20, 2026. Interested parties must submit their responses by the deadline of November 3, 2026. Further details and submission processes are managed through the Texas A&M University procurement portal.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

DEADLINE

Fabrication of Test Section AssembliesThis subcontract involves the precision fabrication of test section assemblies for prime contractors supporting the Texas A&M University BAM Range Phase II projects. The scope of work requires the use of CNC machining and precision assembly jigs to produce components specifically designed for materials testing and aero-optics, ensuring all deliverables adhere to Specialized Vessel Fabrication Specifications. The opportunity is categorized under NAICS code 332710 and is managed by Texas A&M University. Interested parties must note the response deadline of November 3, 2026, with the project focusing on the delivery of completed high-precision assemblies.

POSTED

DEADLINE

Range Piping and Expansion Joint FabricationThis subcontract for Texas A&M University involves the supply and fabrication of industrial range pipes and expansion joints for the BAM Range Phase II projects. The scope of work includes the cutting, bending, and welding of industrial-grade piping, as well as the sourcing and installation of expansion joints designed to manage thermal and mechanical movement in accordance with Specialized Vessel Fabrication Specifications. The project is categorized under NAICS code 332996. Interested parties should note that the solicitation was posted on October 20, 2026, with a response deadline of November 3, 2026. The contract requires the delivery of all fabricated range pipes and the successful installation of the expansion joints to support the prime contractors on site.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Fabrication of Laser Firing Vessel (LFV) and Impact TankThis subcontract involves the fabrication of high-specification pressure vessels and containment tanks for prime contractors supporting the Texas A&M University BAM Range Phase II projects. The scope of work includes the welding, forming, and assembly of heavy-gauge metal vessels, specifically the Laser Firing Vessel, the LFV Connection, and the Impact Tank, utilizing high-strength alloys and precision metal forming tools. All fabrication must strictly adhere to the ASME Boiler and Pressure Vessel Code and Specialized Vessel Fabrication Specifications. The project is categorized under NAICS code 332312, with a response deadline set for November 3, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS