Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CAM, CONTROL

Active
SPE7LX-26-U-9393Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a critical application item, specifically a control component identified by part number SW142-16 manufactured by Emerson Automation Solutions, under the NSN 3040-01-417-2330. The item is designated as a Level 1 non-subsafe supply and is subject to strict material restrictions, including a prohibition on intentional introduction of mercury or mercury-containing compounds, with limited exceptions for functional uses in batteries, fluorescent lights, sensors, weapon systems, and specified chemical reagents approved by NAVSEA. Portable fluorescent lamps or instruments containing mercury must meet shockproof standards and include a secondary containment boundary as mandated by NAVSEA 5100-003D. The contract mandates packaging in full compliance with MIL-STD-2073-1E, including prescribed preservation methods, wrap materials, and unit container specifications. Marking must adhere to MIL-STD-129 with no special marking codes required, and palletization must comply with DLA’s packaging requirements. Delivery is FOB origin with no tolerance for quantity variance, inspection and acceptance occur at destination, and delivery is due within 140 days. The contract is issued under DLA Direct CONUS coverage with a single unit of issue (EA) at a fixed price, and quantities listed are estimates that may not be finalized by the IDC. The solicitation, numbered SPE7LX-26-U-9393, was posted on August 10, 2026, with responses due by August 25, 2026, and falls under NAICS code 333613 for industrial machinery manufacturing within the Department of Defense’s Strategic Acquisition Program Directorate.

General Info

One CAM CONTROL unit via SAM.gov by Aug 25, 2026, to DLA depots, $350K cap, two approved vendors only.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUSA
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAM,CONTROL
1CAM,CONTROL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
LEVEL 1/SUBSAFE REQUIREMENTS DO NOT APPLY
TO THIS ITEM.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
EMERSON AUTOMATION SOLUTIONS FINAL 15187 P/N 07209001128
EMERSON AUTOMATION SOLUTIONS FINAL 15187 P/N SW142-16
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000239438 0001 EA 1.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:3040014172330
DELIVERY (IN DAYS):0140
SPE7LX-26-U-9393
SECTION B
PR: 1000239438 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7LX-26-U-9393 NSN/Part Number: 3040-01-417-2330 Quantity: 1 EA Purchase Request: 1000239438QTY: 1 Delivery: 140 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
Federal
Brand name Hitachi bushings in accordance with the item list attached for Western Area Power Administration, Sierra Nevada Region.The contract anticipates the procurement of brand-name Hitachi bushings in strict compliance with a specified item list for the Western Area Power Administration, Sierra Nevada Region, with performance required within California. This forecasted acquisition is designated under the Small Business Administration set-aside program, specifically intended for small businesses, and is classified under NAICS code 333613, which pertains to other agricultural, construction, and mining machinery manufacturing. The solicitation is posted under the Department of Energy, and while no formal solicitation number or detailed address information is provided, the point of contact for small business program inquiries includes two designated managers reachable via email at tetrault@wapa.gov and setzel@wapa.gov. The contract is in the pre-acquisition phase and is intended to facilitate engagement with small business vendors capable of supplying the required Hitachi bushings as detailed in the attached item list.
Western Area Power Administration

POSTED

about 11 hours ago

DEADLINE

N/A
View Details
NAICS: 333613
New
DIBBS
Linear Actuating Cylinder Manufacturing
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
GEAR, SPUR
Solicitation # SPE7L4-26-T-6225
The contract calls for the procurement of a spur gear with 38 teeth and a 20-degree pressure angle, designated as a Navy-identified Critical Safety Item and a restricted source item requiring government engineering source approval. The item is subject to stringent quality and marking standards including MIL-STD-129 for shipment labeling, MIL-STD-2073-1E for packaging, and ISO 9001:2015 for quality management, with all unit packs needing to display the lot and serial number, contractor and actual manufacturer’s Cage Code, and part number. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions controlled by the solicitation or award date depending on acquisition type. The contract prohibits the intentional addition of mercury or mercury compounds except in specific exempted applications such as batteries, fluorescent lights, sensors, or weapon systems, and requires mercury-containing portable devices to have shockproof construction with a secondary containment boundary per NAVSEA 5100-003D. Ozone-depleting chemicals are strictly forbidden in any manufactured item. The solicitation mandates compliance with DFARS clauses covering cybersecurity, hazardous materials, export control, Buy American provisions, and prohibitions on covered telecommunications equipment and hexavalent chromium, along with NIST SP 800-171 DOD assessment requirements and whistleblower protections. Offers are evaluated under a pass/fail gate system that excludes additive manufactured items and requires prior submission of Safety Data Sheets; failure to meet these requirements disqualifies the offeror. The contract is fixed-price with three CLINs for quantities of 2, 12, and 30 packing groups (each PG equals 2 units), totaling 44 units, with all deliveries FOB origin and inspection and acceptance occurring at origin. Delivery windows are set at 83 days after order receipt, with distinct shipping destinations at DLA San Diego, Cherry Point, and Tinker AFB, and the need ship dates range from August 2026 through October 2027. All quotations must be submitted through DIBBS by August 21, 2026, and electronic payment processing is required via WAWF. The item is supplied under DLA’s Automated Simplified Acquisitions Master Solicitation Revision 105, with no deviation permitted from source restrictions or safety specifications.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7L1-26-T-950R
This contract under solicitation SPE7L1-26-T-950R is a total small business set-aside for the production and delivery of a specific item identified by NSN 0001S00000061, with a quantity of 30 units and a delivery timeline of 777 days after award. The procurement falls under NAICS code 333613 and is managed by the Department of Defense through the Land Supply Chain. The contractor must submit two units of lot/item 3040/6258574 within 120 calendar days of contract award for first article testing at Fleet Readiness Center East, Building 148, Bay C, Cherry Point, NC. Government testing is mandatory per FAR 52.209-4 and Alternate I, and the contracting officer will provide written notification of approval, conditional approval, or disapproval within 120 days of receiving the first article units. Disposition of these test units must follow the guidelines in FAR 52.209-3 or 52.209-4. Fast pay is not applicable, and the contractor must identify any equivalent alternatives along with current dealer or distributor certifications and accreditations. All responses are due by August 21, 2026, with the solicitation posted on August 10, 2026.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
BREATHER
Solicitation # SPE7L1-26-T-949F
This contract is for the procurement of one unit of a BREATHER item, identified by NSN 2520-14-574-0622 and manufacturer part number 0501 218 540 from ZF Friedrichshafen AG D8124, classified as a critical application item. The requirement is governed under solicitation SPE7L1-26-T-949F, issued by the Department of Defense’s Land Supply Chain under the Defense Logistics Agency’s Automated Simplified Acquisitions Master Solicitation Revision 105, with a response deadline of August 21, 2026. Delivery is mandated within 20 days of receipt of order, with an original required delivery date of August 7, 2026, and must be shipped FOB Origin; inspection and acceptance occur at the destination. The item must be packaged and labeled in strict accordance with MIL-STD-129 and DLA packaging requirements RP001, with non-hazardous materials compliant with ASTM D3951 unless superseded by higher-priority DLA technical requirements. Hazardous materials must adhere to TQ requirement IP025 and the Hazard Communication Standard (29 CFR 1910.1200), with prior submission of hazard labels and material safety data sheets required before award. The use of Class I ozone-depleting chemicals is explicitly prohibited, and substitute chemicals require approval unless authorized by specification. Item Unique Identification is not required per customer request. Shipping instructions direct delivery to the Navy Expeditionary Logistics Support Group in Williamsburg, Virginia, with parcel post strictly forbidden—shipment must occur via the fastest traceable means. All contractual obligations incorporate comprehensive FAR and DFARS clauses covering inspection, cybersecurity, whistleblower rights, electronic invoicing via WAWF, and prohibitions on hexavalent chromium, covered telecommunications equipment, and other restricted substances. Contractors must maintain active SAM registration and WAWF access to enable electronic payment and receiving reports, and are subject to evaluation under the DLA’s automated procurement framework without a small business set-aside.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-T-947Z
The contract is for the procurement of two straight shafts with NSN/part number 3040-01-485-8075, under solicitation number SPE7L1-26-T-947Z, issued by the Department of Defense’s Land Supply Chain. Delivery is required within five days after contract award, and responses must be submitted by August 21, 2026. The solicitation is a full and open competition with no set-aside classification and falls under NAICS code 333613. Contractors must comply with stringent technical and quality requirements as referenced in the DLA Master List of Technical and Quality Requirements, and must adhere to all applicable DLA packaging, configuration change management, and export control regulations. The item involves technical data subject to ITAR or EAR export controls, restricting access to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and have received explicit authorization from the DLA. Ozone-depleting chemicals are strictly prohibited in any component or process, and substitutions require prior approval. Additionally, all covered defense information must be handled in accordance with applicable cybersecurity protocols, and contractors must be CMMC Level 2 certified third-party assessment organizations. The point of contact for inquiries is Kristina Derry, with delivery performance required in Suffolk, Virginia, 23435-5000.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
ACTUATOR, MECHANICAL, NO
Solicitation # SPE7L1-26-T-948V
This contract specifies the procurement of a mechanical actuator, nonaircraft, with NSN 3040016437376 and part number 648064 from Parker-Hannifin Corporation, for a quantity of five units at a unit price of five dollars, totaling twenty-five dollars. The item must be delivered FOB origin within 164 days, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific procedures for preservation, wrapping, and containerization, with marking in accordance with MIL-STD-129 and no special marking required. Palletization must follow DLA’s packaging requirements. The delivery address is DLA Distribution Red River, Building 499, Texarkana, TX, with the same location serving as the freight shipping address. The original required delivery date is August 31, 2027, though a need ship date of February 2, 2027, is also noted. The solicitation number is SPE7L1-26-T-948V, issued under a total small business set-aside, with NAICS code 333613. Technical and quality requirements are incorporated via the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue or award date. The contract is managed by the Department of Defense, Land Supply Chain, with primary point of contact Mary Capezzuti.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7LX-26-U-9448
The contract pertains to the procurement of two groove pulleys, identified by NSN 3020-01-468-0867 and part number 15661310-2, supplied by JERED LLC under solicitation SPE7LX-26-U-9448. The item is classified under NAICS code 333613 and is being procured through a DLA direct, CONUS delivery arrangement with a delivery deadline of 113 days after award, FOB origin. The quantity is fixed at two units with zero percent variance allowed, and inspection and acceptance will occur at the delivery destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, using DLA-approved packaging methods including controlled moisture protection and specific unit container specifications, with no special marking required. The contract incorporates the DLA Master List of Technical and Quality Requirements, which governs all technical and quality stipulations referenced by R or I numbers. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. All supplies must be free from government identification upon non-acceptance. The solicitation was posted on August 10, 2026, with responses due by August 25, 2026, and the point of contact is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
DRIVE SHAFT ASSEMBLY, C
Solicitation # SPE7LX-26-U-9491
The contract is for the procurement of 106 units of a Drive Shaft Assembly, Constant Velocity, with NSN 2520-20-000-5207 and part number 10657390-011, issued under solicitation SPE7LX-26-U-9491 by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 81 days FOB origin with zero variance in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s specific packaging requirements, including double-walled, weather-resistant corrugated fiberboard containers with full overlapping flaps, proper preservation of all bare metal surfaces, lubrication of moving parts, and individual packaging to immobilize each item. Special marking includes the “Arrow Up” and “Heavy Item” labels as per ZZ special requirements, and all marking must align with MIL-STD-129. The unit of issue is each, priced at $106.00 per unit for a total value of $11,236.00. The contract incorporates technical and quality requirements from the DLA Master List and mandates CMMC Level 2 Cybersecurity Self-Assessment compliance. Hazardous material status must be determined and reported by the manufacturer prior to award, and packaging must adhere to IP025 guidelines if applicable. The solicitation was posted on August 10, 2026, with a response deadline of August 25, 2026, and falls under DLA Direct, CONUS coverage.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
COUPLING, SHAFT, FLEXIBL
Solicitation # SPE7L3-26-Q-1268
The contract pertains to the procurement of 41 units of a flexible shaft coupling, identified by NSN 3010-00-775-7658, under solicitation SPE7L3-26-Q-1268, issued by the Department of Defense’s DLA Land and Maritime division. Delivery is required within 135 days after receipt of order, with FOB origin terms, and all items must be shipped to the designated receiving warehouse in Tracy, California. The item is manufactured using a metal casting process requiring specialized tooling, and the technical requirements are specified in the Technical Data Package, including drawings and Quality Assurance Provisions dated through 2026. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, with all referenced R and I numbers governing technical and quality standards. The item is designated as a Critical Application Item, and qualification requirements demand adherence to any applicable Qualified Products Lists (QPL) or Qualified Manufacturers Lists (QML) for its components. All deliveries must meet stringent packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, with specific preservation, wrapping, and containerization requirements, and must include mandatory labeling identifying the contract number, lot/item number, and a statement indicating the items are Product Verification Test Samples not to be posted to stock. Inspection and acceptance occur at origin, with sampling conducted under MIL-STD-1916 or ASQ H1331 using a zero-based acceptance criterion; unspecified attributes are treated as major with an AQL of 1.0. The contract enforces a firm fixed price with zero variance tolerance. Contractor compliance includes prohibition of Class I ozone-depleting chemicals, mandatory submission of substitutes for approval unless authorized, and adherence to DFARS and FAR clauses governing defense telecommunications equipment prohibitions, cybersecurity, sustainable products, veteran employment reporting, and subcontracting practices. Electronic invoicing via WAWF is required, and the Government may invoke Product Verification Testing at any point after award, with the contractor prohibited from shipment until receiving written notification of acceptable test results. Full and open competition applies, and the contract incorporates environmental, security, and regulatory compliance requirements including restrictions on business with the Maduro regime and covered defense information handling.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333613
New
DIBBS
MODULATOR, TRANSMISS
Solicitation # SPE7L3-26-T-170P
The contract pertains to the procurement of one unit of a MODULATOR, TRANSMISS with NSN 2520-01-677-5095 under solicitation SPE7L3-26-T-170P, issued by the Defense Logistics Agency for the Department of Defense. The item is to be delivered within five days of award to Fort Bragg, North Carolina, with FOB Origin terms despite the contract specifying FOB Destination due to the First Destination Transportation program. The delivery must occur no later than July 27, 2026, and the item is subject to strict packaging and marking requirements dictated by MIL-STD-2073-1E and MIL-STD-129, including a unit container code D3, packaging code U, and no special marking. Palletization must conform to DLA Packaging Requirements RP001, and hazardous material handling is governed by IP025 and the Hazard Communication Standard, requiring appropriate labeling in accordance with 29 CFR 1910.1200 unless exempted by other federal statutes. The use of Class I ozone-depleting chemicals is prohibited, and any substitutes must be approved unless expressly authorized by specification. The item is not subject to additive manufacturing and must be shipped via the fastest traceable means excluding parcel post. The contract incorporates multiple Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses addressing cybersecurity, safeguarding covered defense information, whistleblower protections, export control, prohibition of hexavalent chromium and Communist Chinese military company items, electronic payment via WAWF, and compliance with NIST SP 800-171 assessment requirements. Acceptance and inspection both occur at destination under FAR 52.246-2. The contract is a fixed-price type with no small business set-aside, and offerors must submit quotes via the DIBBS portal by August 21, 2026. All responses must include business size and socioeconomic status representations, and joint venture participants must provide unique entity identifiers. The contractor is required to comply with DLA Master Solicitation Revision 105, and technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List. Payment will be processed electronically, and the contracting officer is Lee Miller, reachable at the provided contact details.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
PROPELLER SHAFT WIT
Solicitation # SPE7L1-26-T-949N
This contract is for the procurement of one Propeller Shaft WIT with NSN 2520-99-217-1709, sourced from JCB Inc. under part number 400/J4387, issued under solicitation SPE7L1-26-T-949N by the Defense Logistics Agency, Land and Maritime Land Supply Chain. The item is a restricted source requiring government engineering source approval, and delivery is mandated within five days of award with FOB Origin terms, delivered to the bulk break point at Building 8410, Edwards Road, Fort Riley, Kansas 66442-0000. Inspection and acceptance occur at the destination, governed by FAR 52.246-2, with no variation allowed in quantity. Packaging must comply with MIL-STD-2073-1E, including specific preservation, wrapping, and container standards, while marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA’s RP001 requirements. The product must not contain class I ozone-depleting chemicals, and substitute chemicals require prior approval unless explicitly authorized by specification. Hazardous materials must be labeled per OSHA’s Hazard Communication Standard, and Safety Data Sheets must be submitted pre-award; failure to do so disqualifies the offeror. The contract incorporates a comprehensive set of Federal Acquisition Regulation clauses related to cybersecurity, supply chain integrity, labor practices, environmental compliance, and payment processing. These include mandatory requirements for safeguarding covered defense information under 252.204-7012, prohibition of hexavalent chromium and covered telecommunications equipment, compliance with NIST SP 800-171 assessment standards, and adherence to the System for Award Management (SAM) certification requirements. Offerors must validate all representations in SAM, including small business status, employment eligibility, and trafficking in persons compliance. Payment must be processed electronically through Wide Area Workflow (WAWF), requiring simultaneous submission of invoices and receiving reports. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date controlling. All submissions must be completed via DIBBS by the closing date of August 21, 2026, and the contract type is fixed price with no specified unit price, leaving pricing as a response element from
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9451
This contract pertains to the procurement of a commercial off-the-shelf item identified as AM-01-3 by Ameritape LLC, with NSN 5340015599845, under solicitation SPE7LX-26-U-9451. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, requiring strict adherence to MIL-STD-130N for identification marking and MIL-STD-129 for packaging and labeling, including the special marking code 32 for shelf-life compliance. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, containment, and palletization per DLA’s procurement requirements. The quantity is fixed at 169 units with zero variance allowed, delivered FOB origin within 116 days, with inspection and acceptance occurring at destination. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical attributes are verified at Level VII or AQL 0.1. The contract is subject to DLA’s Master List of Technical and Quality Requirements, with Covered Defense Information applicable. This is a total small business set-aside under NAICS code 332722, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek designated as the point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7LX-26-U-9366
The contract pertains to the procurement of a KNOB with NSN 5355-00-072-1991 and part number 247039, supplied by C&H HYDRAULICS INC under a Women-Owned Small Business Set-Aside solicitation numbered SPE7LX-26-U-9366. The request is for 25 units, each to be delivered FOB origin within 191 days, with no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements, including palletization as specified. The unit of issue is each, and inspection and acceptance occur at the destination. The contract specifies a unit price of $25.00, totaling $625.00, and confirms this is an estimated quantity subject to change. The solicitation was posted on August 10, 2026, with a response deadline of August 25, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7LX-26-U-9382
This contract pertains to the procurement of 2,717 units of RETAINER, PACKING with NSN 5330-01-154-7159 under solicitation SPE7LX-26-U-9382, issued as a Total Small Business Set-Aside. The requirement mandates compliance with all applicable technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the controlling revision determined by the solicitation issue or award date depending on acquisition size. The item is explicitly prohibited from containing any asbestos as defined in Fed-Std-313 and has been approved for manual exclusion from the First Destination Packaging Program, meaning it is not eligible for standard commercial packaging and must meet proprietary packaging specifications. Delivery must be completed within 94 days after award, and all supplies must be free of government identification if not accepted. The procurement is managed by the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek listed as the primary point of contact. The NAICS code is 339991, indicating the item falls under Other Miscellaneous Manufacturing, and the solicitation was posted on August 10, 2026, with responses due by August 25, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7LX-26-U-9417
This contract is for the supply of SEAL, PLAIN items under solicitation SPE7LX-26-U-9417, designated as a total small business set-aside with a NAICS code of 339991. The items are identified by NSN 5330-01-282-0909 and part numbers 063000143 and A-000-232-113-000, with a total quantity of 14 units delivered in a single line item at a unit price of $14.00. Delivery is required within 112 days from the origin point under FOB terms, with no variance permitted in quantity, and both inspection and acceptance occur at the destination. The item is classified as a critical application with a non-extendable shelf life of 180 months, requiring at least 85% of that shelf life to remain at the time of delivery. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag, and must adhere to MIL-STD-2073-1E for preparation and MIL-STD-129 for marking—with special marking code 32 indicating Type I shelf-life status. Palletization follows DLA’s packaging requirements, and intermediate containers must meet MIL-P-4861 specifications. The contract strictly prohibits the use of ozone-depleting chemicals and intentional addition of mercury or mercury compounds, except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, and certain reagents approved by NAVSEA. Mercury-containing portable lamps and instruments must have shockproof construction and a secondary containment barrier as defined by NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. Configuration changes require formal engineering change proposals, and any deviations or waivers must be formally requested. The item is subject to Covered Defense Information protocols, and packaging and shipping of hazardous materials must follow IP025 standards. All documentation and markings must conform to MIL-STD-130N for identification of U.S. military property and the contract uses the DoD-authorized unit of issue as defined in official DLA resources.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336320
New
DIBBS
GENERATOR, ENGINE ACCES
Solicitation # SPE7LX-26-U-9365
This contract pertains to the procurement of a generator engine accessory, specifically an alternator, identified by NSN 2920000969252 and part numbers 19020208 and 20039, with a required quantity of seven units. The item is classified as a critical application item and will be delivered FOB origin within 69 days under DLA Direct, CONUS coverage. The contract mandates strict compliance with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements for Procurement, with a unit of issue of each and a quantity per unit pack of one. The quantity variance is strictly zero percent, meaning no overages or shortages are permitted. Inspection and acceptance occur at the destination, and government identification must be removed from any non-accepted supplies. The contract was issued under solicitation number SPE7LX-26-U-9365 with a response deadline of August 25, 2026, and the item falls under NAICS code 336320. The Point of Contact for inquiries is Theodore Misiolek of the Department of Defense’s Strategic Acq Program Directorate.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
PEDESTAL, GUN MOUNT
Solicitation # SPE7LX-26-U-9488
The contract pertains to the procurement of a pedestal gun mount, identified by NSN 1005131229621 and part number 3634001650 from FN HERSTAL S.A., with a quantity of six units to be delivered within 294 days via FOB origin terms. The acquisition is categorized as a DLA Direct, CONUS contract under solicitation SPE7LX-26-U-9488, and the quantity is fixed with no variance allowed—zero percent plus or minus. Inspection and acceptance both occur at the destination, and packaging must strictly conform to MIL-STD-2073-1E with specific packaging methods, materials, and controls including unit containers designated as E5 and packaging code U. Marking must comply with MIL-STD-129 and includes no special marking codes. The item is subject to DLA’s packaging requirements and requires full supply chain traceability documentation to be retained by the contractor as mandated by DLAD Procurement Note C03 issued in August 2016. Additionally, the contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and is governed by the revision of the master in effect on the solicitation issue date. The unit of issue is each (EA), and the unit price is not explicitly listed but the total price is calculated based on the fixed quantity. The contract is under the authority of the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek designated as the primary point of contact.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336330
New
DIBBS
WHEEL ASSEMBLY, PNEU
Solicitation # SPE7LX-26-U-9504
The contract pertains to the procurement of 123 units of a pneumatic wheel assembly identified by NSN 2530-01-650-9611 and part number 03018 manufactured by TRU-HITCH, INC. Deliveries are due within 73 days of contract award, with shipment FOB origin and final inspection and acceptance occurring at the destination. The quantity is firm with no variance allowed, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 for marking, while preservation follows MIL-DTL-4M for non-airplane tires. Palletization is required if total shipment weight exceeds 125 lbs, per MIL-HDBK-774. All packaging and preservation methods must adhere to DLA’s specific requirements, including the use of special marking code ZZ indicating 32-type I shelf-life lot markings as mandated by the specification. The item carries a non-extendable shelf life of 72 months as defined by RS001 and RS024. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. This procurement falls under a total small business set-aside with NAICS code 336330, issued by the Department of Defense’s Strategic Acquisition Program Directorate, and is subject to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The solicitation was posted on August 10, 2026, with a response deadline of August 25, 2026, and contract performance is limited to the contiguous United States under DLA direct coverage.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SPRING, HELICAL, EXTE
Solicitation # SPE7LX-26-U-9435
The contract pertains to the procurement of 108 helical extension springs identified by NSN 5360-01-564-9094 under solicitation SPE7LX-26-U-9435, with a response deadline of August 25, 2026, and a delivery requirement of 78 days after award. The acquisition is a total small business set-aside under NAICS code 332722, managed by the Department of Defense's Strategic Acquisition Program Directorate. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. The item includes technical data subject to export control under ITAR or EAR, requiring strict handling protocols, including prior authorization for disclosure to foreign persons, even within the United States. Contractors must hold approved US/Canada Joint Certification Program status, complete required DLA training, and pass a questionnaire to gain access to controlled data, as mandated by DFARS 252.225-7048. Packaging must adhere to DLA standards, and any configuration changes require formal engineering change proposals or variance requests. Government identification must be removed from non-accepted supplies, and all data handling must comply with export control regulations applicable to both U.S. entities and their foreign subsidiaries. The point of contact for this solicitation is Theodore Misiolek, reachable via the provided email and phone number.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333612
New
DIBBS
CABLE ASSEMBLY, CONT
Solicitation # SPE7LX-26-U-9467
The contract pertains to the procurement of a cable assembly, control, with part number MEA-25000-5505 and NSN 3040-01-670-1299, for a quantity of 140 units at a unit price of $140.00, resulting in a total price of $19,600. The item is procured under a DLA Direct, CONUS coverage arrangement, with delivery required within 128 days FOB origin. The quantity is fixed with no variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and containerization, with labeling adhering to MIL-STD-129 without special markings. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract is issued under solicitation number SPE7LX-26-U-9467, with a response deadline of August 25, 2026, and is classified under NAICS code 333612. The point of contact is Theodore Misiolek from the Strategic Acquisition Program Directorate within the Department of Defense.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
HOOD, ENGINE COMPARTMEN
Solicitation # SPE7LX-26-U-9392
The contract pertains to the procurement of a hood for the engine compartment of M-915A3 and M-916A1 military trucks, supplied by FREIGHTLINER OF SAVANNAH, INC. under part number A17-12443-004G and NSN 2510-01-327-7717. The requirement is for 62 units to be delivered FOB origin within 90 days, with no tolerance for quantity variation. The delivery is subject to DLA direct, CONUS coverage, and inspection and acceptance occur at the destination. All packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with specific handling instructions requiring the use of the U pack code, mechanical handling, and an upward arrow marking indicating which side to open. The ISPM 15 heat treatment stamp is mandatory and non-negotiable for international compliance, with failure to comply risking shipment rejection. The hood must not contain any Class I ozone-depleting chemicals, superseding prior specification requirements unless an alternative is explicitly authorized. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. The contract was issued under solicitation SPE7LX-26-U-9392 as a Service-Disabled Veteran-Owned Small Business Set-Aside, with Theodore Misiolek designated as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
CABLE, INPUT, AIRCRAF
Solicitation # SPE7LX-26-U-9456
This contract covers the procurement of a cable input component for aircraft under solicitation SPE7LX-26-U-9456, with a quantity of twelve units to be delivered within seventy-seven days FOB origin. The item is identified by NSN 6130-01-562-5471 and is subject to strict technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, which override any other standards unless explicitly superseded. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA’s packaging directives, and no variance in quantity is permitted. The product must be free from intentional introduction of mercury or mercury-containing compounds, except for approved exceptions such as batteries, fluorescent lamps, sensors, and specific instrumentation as defined by NAVSEA, with portable devices containing mercury requiring shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated. Certification requirements include a CMMC Level 2 Self-Assessment, and all supplies must adhere to the cybersecurity and quality provisions listed under RD002, RD004, RA001, and RQ011. The contract is issued under DLA Direct, CONUS coverage with a unit of issue of each, and delivery is for a fixed quantity with no allowance for over or short shipment.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9422
This contract, identified by solicitation number SPE7LX-26-U-9422, is a total small business set-aside under NAICS code 332510 for the procurement of 41 units of COVER, ACCESS with NSN 5340-01-273-4626, requiring delivery within 116 days of award. It incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. Sampling protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized. The contract imposes stringent cybersecurity requirements mandating CMMC Level 2 certification and compliance with DFARS 252.225-7048 for the handling of export-controlled technical data subject to ITAR or EAR, restricting access to contractors with approved JCP certification, completed DOD training, and DLA authorization. Technical data export restrictions apply equally to foreign nationals both within and outside the United States, including foreign subsidiaries of U.S. companies, and non-accepted supplies must have all government identification removed. The primary point of contact for the awarding agency, the Strategic Acquisition Program Directorate under the Department of Defense, is Theodore Misiolek.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details