Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

32-Channel Load Control System with Controlled Load Abort Capability

Active
80AFRC26SS020Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA Armstrong Flight Research Center is seeking a 32-channel closed-loop servo-hydraulic load control system integrated with a Controlled Load Abort System to support structural ground testing of aerospace components and full-scale assemblies. The system is required for the Flight Loads Laboratory to ensure precise control and safety during complex load tests. Due to the need for software compatibility with legacy platforms and the urgency of high-priority projects, the government intends to issue a sole source contract to Moog Inc. under FAR Part 12. Interested organizations may submit their capabilities and qualifications to the designated points of contact by August 24, 2026, at 12:00pm PT. These submissions will be used to determine if the acquisition will remain a sole source or be opened for competition. The procurement is managed by the NASA Armstrong Flight Research Center in Edwards, California, under solicitation number 80AFRC26SS020.

General Info

NASA seeks a 32-channel load control system from Moog Inc. for structural testing.

Agency

National Aeronautics And Space Administration → NASA Armstrong Flight Research CntrView Agency

NAICS

333995 - Fluid Power Cylinder and Actuator ManufacturingView NAICS

Place of Performance

CA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Armstrong Flight Research Cntr
Contacts2 people available
OfficeEDWARDS, CA, 93523, USA
Organization / Agency
National Aeronautics And Space Administration → NASA Armstrong Flight Research Cntr
View Agency Profile
Office AddressEDWARDS, CA, 93523, USA
Contacts
Jamill Richter
contact@example.gov
+1 (555) 000-0000
Nikki Terranova
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

NASA AFRC has a requirement for a modern, safe, modular servo-hydraulic load‑control system to support structural ground testing of aerospace components, wings, and full-scale assemblies. The Flight Loads Laboratory (FLL) conducts complex load tests of unique test article and flight vehicles that place high value on precise control, test article protection, and safe emergency handling. To meet these needs, AFRC is procuring a 32-channel closed-loop load control system integrated with an independent Controlled Load Abort System (CLAS) using Controlled Load Abort Manifolds (CLAMs).


NASA AFRC intends to issue a sole source contract to acquire the 32-channel closed-loop load control system integrated with an independent CLAS using CLAMS from Moog Inc. The FLL is replacing an older load control system from Moog. No other vendor offers a system that is software compatible with the legacy Moog platform. FLL has a time sensitive, high priority project within the next two years that requires Moog’s controlled load abort capability. Using a non-Moog system would cause schedule risk and potentially compromise test safety. In accordance with FAR 6.302-1, Moog is the only source capable of meeting FLL’s needs.


The Government intends to acquire a commercial product or service using FAR Part 12.


Interested organizations may submit their capabilities and qualifications to perform the effort electronically via email to Nikki Terranova, nikki.terranova@nasa.gov and Jamill Richter, jamill.m.richter@nasa.gov not later than 12:00pm PT on August 24, 2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether to conduct this acquisition on a competitive basis. A decision by the Government not to compete this acquisition on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the Government.


NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at : https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf

Similar Contracts

Same NAICS industry code

NAICS: 333995
New
Federal
16--SERVOVALVE,HYDRAULI, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QFB46
NAVSUP Weapon Systems Support Philadelphia intends to solicit a sole source contract for the repair of two hydraulic servovalves, identified by NIIN 016972924 and part number X0665-00007-101. Sikorsky is identified as the only known source for this repair support because they are the Original Equipment Manufacturer and the government lacks the necessary data rights to utilize other vendors. The procurement is categorized under NAICS code 336413 and FSC 1680, with delivery terms set as FOB Origin. The acquisition will follow FAR Part 13 procedures, and the anticipated award date is January 2027. While the government intends to negotiate exclusively with Sikorsky under the authority of 10 U.S.C. 2304(c)(1), all responsible sources may submit capability statements or proposals within 45 days of the synopsis. The solicitation process will be conducted electronically via NECO, and interested parties should direct qualifications to the primary point of contact, Danielle M. Cutrera.
Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333995
New
DIBBS
Supply of Rod & Piston Actuator (NSN 2915-01-218-7655)The contract seeks the supply of 266 units of Rod & Piston Actuator identified by NSN 2915-01-218-7655, which are classified as Critical Safety Items and must fully comply with designated technical specifications. The items may be new, unused, reconditioned, or altered, provided they maintain complete traceability and meet all regulatory and quality requirements. This procurement is part of a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER OEM DIVISION, with the NAICS code 333995 indicating specialization in other miscellaneous manufacturing. The solicitation was posted on August 10, 2026, with responses required by September 10, 2026, and performance is expected to align with Defense Logistics Agency standards. All deliverables must support critical operational systems and require rigorous documentation to ensure integrity and safety throughout the supply chain.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 333995
New
DIBBS
ROD AND PISTON, ACTU
Solicitation # SPE4A5-26-R-0270
The contract pertains to the procurement of 266 Rod & Piston, ACTU units with NSN 2915-012187655 and part number 2665806, classified as a Critical Safety item requiring a higher-level quality system. Delivery is mandated 167 days after receipt of order to a designated location, with FOB at origin and inspection and acceptance occurring at the destination. The solicitation is issued under an unrestricted solicitation using other than full and open competition and is anticipated to be awarded against the OEM’s Basic Ordering Agreement, with the RFP scheduled for release on or about August 12, 2026, and responses due by September 12, 2026. Offers exceeding $900,000 require a subcontracting plan, while those over $10,000,000 must include certified cost and pricing data in addition to a subcontracting plan. All offerors must be registered in the System for Award Management (SAM) to be eligible for award. Alternate offerors must submit a Source Approval Request package along with a completed solicitation copy to be considered; failure to submit sufficient documentation in time will result in exclusion from this procurement, though approval may qualify them for future opportunities. Award decisions will be based on price, past performance, and other factors assessed through the Supplier Performance Risk System. The procuring activity is DLA Aviation, with primary point of contact Jason Balsiger, and performance will occur in Richmond, Virginia.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 333995
New
Federal
Purchase of Gate Valve Actuators for Crooked Creek Lake
Solicitation # W911WN26QA056
The U.S. Army Corps of Engineers, through the Office of W072 Endist Pittsburgh, is soliciting proposals for the purchase of gate valve actuators for Crooked Creek Lake under solicitation number W911WN26QA056. Vendors must complete the required solicitation form and submit their responses by August 13, 2026, at 2:00 PM Eastern Time. All inquiries must be directed to Isaiah Johnson at isaiah.m.johnson@usace.army.mil, and any responses to questions will be issued formally as solicitation amendments to ensure transparency and equal access to information for all participants. The NAICS code 333995 applies to this procurement, indicating it is for other commercial and industrial machinery and equipment. Supporting documentation including current actuator photographs is available in Attachments 1a and 1b to assist vendors in understanding the existing infrastructure. The contract award will be made to a vendor capable of delivering qualified actuators to support the critical infrastructure at Crooked Creek Lake.
W072 Endist Pittsburgh

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 333995
New
Federal
Intent to Sole Source: Slocumb Gate Actuator
Solicitation # F3T3CE6078AW01
The 4th Contracting Squadron at Seymour Johnson Air Force Base in North Carolina plans to award a sole-source, firm-fixed-price purchase order to Delta Scientific Corporation for the procurement of a specific actuator model, MPAI-A4300RM34A operating at 230 volts, essential for the HD300EM barrier system located at Slocumb Gate. This actuator requires precise calibration that is proprietary to Delta Scientific Corporation due to the unique configuration of the barrier system originally awarded to them, leaving no other qualified sources capable of properly calibrating or servicing the unit to ensure correct deployment and retraction. The requirement is justified under R-DFARS 206.103-170, which permits sole-source procurement when only one responsible source can meet the agency’s needs. The contract is issued under solicitation number F3T3CE6078AW01, with a posted date of August 10, 2026, and a response deadline of August 19, 2026. Performance will occur at Goldsboro, North Carolina, within the same installation as the barrier system. The contracting office is part of the Department of Defense, and inquiries should be directed to SSgt Ashley Goodwin or Ryan Rhea. No set-asides are applied to this action, and the NAICS code 333995 identifies the industry as other commercial and industrial machinery and equipment manufacturing.
FA4809 4TH Cons Squadron Cc

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 333995
New
DIBBS
HEAD, LINEAR ACTUATI
Solicitation # SPE4A7-26-R-0689
The solicitation seeks a Head, Linear Actuating Cylinder under NSN 1650-01-089-0444 through a sealed bid process as a Firm Fixed Price Indefinite Quantity Contract with a five-year base period and no options, issued by the Defense Logistics Agency Aviation under solicitation number SPE4A7-26-R-0689. The contract is set aside entirely for small businesses, with an estimated annual requirement of 440 units and a guaranteed minimum of 110 units per year, requiring delivery within 609 days after date of award. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, and only contractors with approved DLA JCP certification, completed training, and authorized access may handle such data. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, including specific codes for preservation method, container types, and a required marking instruction to "Do Not Post to Stock" alongside standard markings. Interior packaging must include hard copies of the contract, material certifications, manufacturing drawings, and return shipping information as mandated by DFARS Appendix F. Inspection and acceptance occur at the source, with quality compliance requiring ISO 9001:2015 certification, calibration of test equipment to ISO 10012:2003 or ANSI/NCSL 2540.3, and sampling per MIL-STD-1916 or comparable zero-based plans. The contractor must warrant parts are valid for one year after receipt on each delivery order. Payment processing is conducted electronically via WAWF, with invoicing dependent on contract type—cost vouchers for cost-type items and invoice-receiving report pairs for fixed-price line items. Offerors must submit proposals via the mandatory Bulk Offer Entry Tool using an approved AMPS account, accompanied by a signed SF1449, with submissions due by 11:59 PM local time on September 7, 2026, and must have completed accurate, current SAM representations within the past year. Award will be based on best value, with past performance weighted significantly more heavily than other non-price factors, and price considered approximately equal in importance to all other factors combined. Progress payments for small businesses are set at 95 percent, and contractors are prohibited from
ASC SUPPLIER OPER AE AND AF DIV

POSTED

4 days ago

DEADLINE

in 27 days
View Details
NAICS: 333995
New
Federal
EDrive for Variable Restraint Assembly
Solicitation # FA857126Q0105
The U.S. Air Force is soliciting a sole-source quote from B&D Industrial under Simplified Acquisition Procedures to supply all necessary tools, parts, materials, and equipment required to produce an EDrive actuator for the Variable Restraint Assembly. This requirement supports the Commodities Maintenance Group at Robins Air Force Base in Georgia and is being conducted as a non-set-aside procurement. The solicitation, identified by number FA857126Q0105, was posted on August 7, 2026, with responses due by August 14, 2026, at 4:00 p.m. EDT. The effort falls under NAICS code 333995, categorized as other general purpose machinery manufacturing, and is managed by the Maintenance Contracting office under the Department of Defense. All work must be performed at Warner Robins, Georgia, with Phillip Braswell as the primary point of contact and Andrew Harth as the secondary.
FA8571 Maintenance Contracting Afsc Pzim

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 333995
New
DIBBS
Unspecified Line Item Delivery (CLIN 0003)A subcontract has been issued under the Defense Logistics Agency, part of the Department of Defense, to deliver an unspecified item tied to CLIN 0003, which supports the broader scope of the prime contract. The delivery is categorized under NAICS code 333995, indicating involvement with other industrial machinery manufacturing, likely including components or parts essential to machinery systems. The contract was posted on August 5, 2026, and the place of performance and organizational details remain unspecified, with no set-aside designation applied. The delivery is coordinated through the DIBBS system, with the award linked to contract SPE4A117G0005 and delivery order SPE4A719F7908, though no point of contact or physical location details are provided.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

N/A
View Details
NAICS: 333995
New
DIBBS
Thermal Actuator Manufacturing and AssemblyThe contract entails the full-scale manufacturing, assembly, and rigorous quality control of two thermal actuators per military specifications, ensuring alignment with stringent defense standards. The scope encompasses every phase of production, from component fabrication to final unit integration, with mandatory adherence to prescribed technical and performance benchmarks. Packaging, labeling, and secure delivery of the completed assemblies are included as integral requirements, guaranteeing readiness for immediate deployment in operational environments. This subcontract falls under the NAICS code 333995 and is managed by the Defense Logistics Agency under the Department of Defense, with performance expected to meet all federal defense procurement protocols. The contract was posted on August 5, 2026, and is identified by the award number SPE7M126P9059. While specific geographic performance locations and point of contact details are not provided, the work is tied to a formal Defense Logistics Agency initiative, implying classified or sensitive handling requirements. Compliance with military-grade certification, traceability, and documentation standards is implied throughout the scope of work.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

N/A
View Details
NAICS: 333995
New
DIBBS
CYLINDER, INNER SHOC
Solicitation # SPE4A7-26-R-X998
The contract is for the procurement of one cylinder, inner shock absorber, boom stowage, identified by NSN 1680-00-672-8041, under an Indefinite Delivery Contract with a five-year base period and no options. It is structured as a Total Small Business Set-Aside, with the North American Industry Classification System code 333995, and is governed under the Defense Logistics Agency's procurement framework. Delivery is scheduled for 365 days after the issue of an order, with FOB Destination terms applying. The contract incorporates detailed technical and quality requirements from the DLA Master List, which supersede industry standards such as ASTM D3951. Packaging and labeling must strictly adhere to MIL-STD-129, including unit of issue and quantity per unit pack markings, barcoding, and compliance with hazardous materials labeling under 29 CFR 1910.1200, while also following DLA packaging requirements. Inspection and acceptance occur at the origin, conducted by the Government, with zero non-conformances required in sample lots, traceability documentation mandatory, and quality systems adhering to ISO 9001:2015. The item includes technical data subject to export controls under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, and only contractors with approved US/Canada Joint Certification Program status and completed DLA training may access this information. Cybersecurity compliance is mandated through safeguarding covered defense information under DFARS 252.204-7012 and NIST SP 800-171 assessment requirements, with the contractor expected to maintain CMMC Level 2 certification. The Defense Priorities and Allocations System applies, ensuring priority performance, and ocean shipments must use U.S.-flag vessels unless a waiver is obtained. Cost or price is evaluated alongside non-price factors, with past performance—particularly as reflected in SPRS assessments, historical quality, and delivery compliance—weighted as significantly important and approximately equal in importance to cost, indicating a trade-off award methodology rather than lowest price technically acceptable. The contractor must provide completed representations regarding entity identification, small business status, export restrictions, and compliance with anti-trafficking, equal opportunity, and sustainability mandates. Invoice submission is required through WAWF, and all subcontractors must flow down applicable clauses including antiterrorism training, whistleblower protections, and prohibitions on toxic substances such as hex
ASC SUPPLIER OPER AE AND AF DIV

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER, ACTUATING,
Solicitation # SPE7L0-26-Q-0291
The solicitation seeks one actuating cylinder, NSN 3040-01-682-5820, part number 776561 from Parker-Hannifin Corporation, under a firm fixed price contract with a 60-day delivery requirement ADO. The item is governed by technical requirements outlined in the DLA Master List and must comply with specific drawings, quality assurance provisions, and sampling standards including MIL-STD-1916 or ASQ H1331, Table 1, with zero nonconformances required for acceptance. Critical, major, and minor attributes are assessed at verification levels VII, IV, and II respectively, or corresponding AQLs of 0.1, 1.0, and 4.0. The cylinder contains components subject to Qualified Products List or Qualified Manufacturers List requirements, and phosphate coating suppliers must hold certification as specified under RQ036. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 with special marking code ZZ and prescribed packaging methods, and the item is subject to DLA packaging requirements RP001. Technical data associated with the item is controlled under ITAR or EAR, requiring prior authorization for export and compliance with DFARS 252.225-7048; only contractors with approved JCP certification, completed export control training, and DLA authorization may access the data. The solicitation mandates electronic invoicing via WAWF, with payment processed through EFT and accelerated payments to small business subcontractors. The contract includes a full suite of FAR and DFARS clauses covering cybersecurity, counterfeit part avoidance, transportation, payment terms, small business growth, employee rights, antiterrorism, and prohibition of certain foreign-sourced materials and services. Offers must be submitted by August 12, 2026, and must include current SAM certifications, including representations regarding inverted domestic corporations, Buy American compliance, and foreign government ownership or control. Quotations must be valid for 90 days, specify pricing basis, identify FOB point, and confirm delivery schedule compliance. Acceptance occurs at destination, and the Government retains all rights to inspect and reject nonconforming supplies. The place of performance includes the DLA W45G18 depot in Texarkana, TX, and contract administration is handled by Jeffrey Bloom at the Columbus, Ohio office.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 333995
New
Federal
Nickajack Lock Hydraulic Cylinder Replacement
Solicitation # W912P526QA030
The contract titled Nickajack Lock Hydraulic Cylinder Replacement is a Small Business Set Aside opportunity under the SBA category, intended exclusively for small businesses. It is managed by the Department of Defense through the W072 Endist Nashville office, located in Nashville, Tennessee, and is classified under NAICS code 333995, which pertains to other commercial and industrial machinery and equipment manufacturing. The solicitation was posted on August 5, 2026, with a response deadline of August 14, 2026, at 6:00 PM Eastern Time. The work involves replacing hydraulic cylinders at Nickajack Lock, though the exact location of performance is unspecified in the data provided. Primary point of contact for inquiries is Alison Abernathy, reachable at 615-852-9150 or alison.t.abernathy@usace.army.mil, with Jori Jackson as the secondary contact at 615-736-5538 or jori.l.jackson@usace.army.mil. The solicitation is open for bids through the SAM.gov portal, and bidders must ensure compliance with all small business eligibility requirements and submission guidelines by the stated deadline. All proposals must address the technical specifications and performance requirements for the hydraulic cylinder replacement to ensure timely and safe operation of the lock system.
W072 Endist Nashville

POSTED

6 days ago

DEADLINE

in 3 days
View Details

More opportunities from National Aeronautics And Space Administration → NASA Armstrong Flight Research Cntr

Same awarding agency

NAICS: 488190
Federal
Global Hawk Skyrange Program Demonstration Engineering, Manufacturing, and Technical Support
Solicitation # 80AFRC26SS011
NASA Armstrong Flight Research Center is seeking engineering, manufacturing, and technical support services for the Global Hawk Skyrange Program Demonstration, focusing on the operation, maintenance, and necessary modifications to Global Hawk aircraft, ground control stations, ground support equipment, and associated spares and repairs. The contract will be awarded as a sole source to Northrop Grumman Systems Corporation under FAR 6.103-1, as the agency has determined that only this source has the unique capability to fulfill the requirements, and no other supplies or services would satisfy the government’s needs. The government explicitly does not intend to treat this as a commercial product or service acquisition under FAR Part 12. Interested parties may submit their qualifications electronically to Roxana Romero at roxana.l.romero@nasa.gov no later than August 17, 2026, at 12:00 PM PST, to assist the government in evaluating whether competitive sourcing is warranted; however, the final decision on competitiveness rests solely with the government. The solicitation number is 80AFRC26SS011, with a NAICS code of 488190, and the primary place of performance is Edwards Air Force Base in California. NASA Clause 1852.215-84, Ombudsman, applies, and contact information for the Center Ombudsman is available through the official NASA procurement website.
Other Support Activities for Air Transportation

POSTED

11 days ago

DEADLINE

in 6 days
View Details
NAICS: 236220
Federal
Small Business Subcontracting ParticipationThis contract opportunity is designated as a Total Small Business Set-Aside under the SBA guidelines, specifically targeting certified small businesses for participation in task orders related to construction activities coded under NAICS 236220, which covers commercial and institutional building construction. The contracting entity is NASA Armstrong Flight Research Center, a division of the National Aeronautics and Space Administration, and the opportunity is structured to promote small business involvement by reserving the award exclusively for eligible small business concerns, ensuring they have a fair chance to compete without larger business interference. The solicitation is accessible through the SAM.gov platform with a posting date of July 6, 2026, and while no specific solicitation number is provided, the task order mechanism allows for multiple awards to be issued under the broader contract vehicle. Performance is expected to occur under the jurisdiction of the NASA Armstrong facility, though precise location details such as city, state, or zip are not specified. The opportunity encourages direct participation by small businesses in federal construction projects, with benefits tied to socio-economic set-aside preferences established under FAR 19.5.
Commercial and Institutional Building Construction

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 238990
Federal
Specialty Trade ContractingThis contract is a subcontract under a Total Small Business Set-Aside for specialty trade contracting services focused on roofing, framing, drywall, and insulation for commercial and institutional buildings. The NAICS code 238990 identifies the scope as other specialty trade contractors, excluding construction management or general building projects. The work is tied to NASA Armstrong Flight Research Center under the National Aeronautics and Space Administration, with performance location details unspecified. The opportunity was posted on July 6, 2026, and is intended exclusively for small businesses as defined by the SBA, ensuring all performance and management responsibilities remain within qualifying small business entities. No point of contact or detailed place of performance is provided in the data, but the contractual engagement is accessible via the SAM.gov platform for further information.
All Other Specialty Trade Contractors

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 327320
Federal
Concrete Supply and PlacementThe contract titled Concrete Supply and Placement is a subcontract issued under a Total Small Business Set-Aside authority as defined by FAR 19.5, exclusively available to small businesses. It requires the supply and placement of ready-mix concrete for foundational elements, slabs, and structural components at federal construction sites managed by NASA Armstrong Flight Research Center. The NAICS code 327320 classifies the work under Concrete Product Manufacturing, indicating the primary scope involves both the production and on-site pouring of concrete materials according to federal construction specifications. The contract was posted on July 6, 2026, and performance is expected to occur at various locations under NASA’s jurisdiction, though exact site details are not specified. Only small business concerns are eligible to compete, and the award will be made without full and open competition due to the set-aside designation.
Ready-Mix Concrete Manufacturing

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 237990
Federal
Civil/Earthwork and Site PreparationCivil earthwork and site preparation services are being procured under a small business set-aside subcontract for federal construction projects on NASA Armstrong Flight Research Center property. The work encompasses grading, excavation, drainage systems, and all associated site development activities necessary to prepare land for construction, with the contract governed under NAICS code 237990 for other heavy and civil engineering construction. This opportunity is reserved entirely for small businesses as defined by the Small Business Administration under FAR 19.5, ensuring that only qualified small business subcontractors may bid. The solicitation was posted on July 6, 2026, and performance is expected to occur at various locations within NASA Armstrong’s operational areas, though no specific city or state is listed in the details. No point of contact is provided, and interested parties must access the full solicitation through the official SAM gov portal.
Other Heavy and Civil Engineering Construction

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 238220
Federal
Plumbing and HVAC SystemsThe contract is for the installation and servicing of plumbing, heating, ventilation, and air conditioning systems in institutional buildings under a total small business set-aside designation, reserved exclusively for small businesses as defined by the SBA. It is classified under NAICS code 238220, which specifically covers plumbing, heating, and air-conditioning contractors, and is structured as a subcontract within the NASA Armstrong Flight Research Center’s procurement framework. The work is intended to support operational infrastructure needs at facilities managed by the National Aeronautics and Space Administration, though the exact location of performance is not specified. This opportunity was posted on July 6, 2026, and is available through the SAM.gov platform for eligible small business contractors to pursue.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 238210
Federal
Electrical Systems InstallationThis contract is a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 238210 corresponding to electrical contracting services. It encompasses the full scope of electrical systems installation, wiring, and integration for buildings and infrastructure located on secure federal sites under the jurisdiction of NASA Armstrong Flight Research Center. The work must be performed in compliance with federal security standards and technical specifications applicable to sensitive government facilities, requiring specialized expertise in secure construction environments. The solicitation was posted on July 6, 2026, and the place of performance is tied to NASA Armstrong’s facilities though specific geographic details are not provided. All work must be executed by a small business concern eligible under the SBA’s set-aside program and must align with federal requirements for systems integration and facility infrastructure on secure sites.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 236220
Federal
General Building Construction (Class A/B)This contract is a total small business set-aside for general building construction services classified as Class A/B, encompassing full-scope commercial construction projects such as new builds, renovations, and facility upgrades on secure federal sites within California. The work requires coordinated execution across multiple trades with strict adherence to schedules, ensuring timely delivery on high-security government installations. The North American Industry Classification System code is 236220, identifying the scope as commercial and institutional building construction. The contracting activity is under NASA Armstrong Flight Research Center, part of the National Aeronautics and Space Administration, and the opportunity is exclusively reserved for small businesses as defined by the Small Business Administration under FAR 19.5. The contract was posted on July 6, 2026, and while the exact location details are unspecified, performance is constrained to facilities in California under secure operational conditions.
Commercial and Institutional Building Construction

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
Project Management and Technical OversightThis subcontract titled "Project Management and Technical Oversight" involves providing program and technical management services to ensure adherence to the requirements set forth by NASA, the FAA, and the United States Air Force. The scope includes oversight and coordination of classified integration activities, ensuring that sensitive operations are managed securely and in compliance with all relevant regulations. The contract falls under the NAICS code 541611, which relates to administrative management and general management consulting services. The work is to be performed in Ardmore, with the contracting agency being the NASA Armstrong Flight Research Center. The primary objective is to assure that all technical and program management tasks meet strict federal standards, particularly in the context of aerospace research and classified projects. Although details such as solicitation number and specific organizational type or set-aside status are not provided, the contract underscores the critical importance of coordination across multiple federal agencies to maintain compliance and effective integration within aerospace program management.
Administrative Management and General Management Consulting Services

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 541512
Federal
Systems Integration and Compatibility TestingThis contract involves the integration of new cabin and test systems with the existing avionics and flight controls, ensuring seamless operation and interoperability. The contractor will conduct extensive compatibility and data acquisition testing to validate system performance and data integrity, supporting the overall functionality of the aircraft systems. The work is subcontract-based and falls under the NAICS code 541512, which pertains to computer systems design services. The contract is issued by NASA Armstrong Flight Research Center and is set to be performed in Ardmore, zip code 73401. Although specific details on the solicitation number or set-aside status are not provided, the focus is clearly on enhancing system integration and testing capabilities to support advanced aerospace research and development efforts. The work aims to enable robust system compatibility and ensure the reliable acquisition of essential flight data.
Computer Systems Design Services

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 325510
Federal
Exterior Repainting and NASA Livery ApplicationThe contract involves the removal of existing paint and the application of a new NASA livery on an aircraft's exterior. This includes the precise placement of markings, logos, and the use of durable aerospace-grade coatings designed to withstand operational conditions. The work is linked to NASA Armstrong Flight Research Center and will be performed in Ardmore, ZIP code 73401. This subcontract falls under the NAICS code 325510, which relates to paint and coating manufacturing. The scope emphasizes high-quality finish requirements tailored to aerospace standards, ensuring the aircraft's exterior meets both aesthetic and performance criteria. The contract was posted on June 9, 2026, and is related to specialized repainting services critical for NASA's fleet maintenance and branding.
Paint and Coating Manufacturing

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 336412
Federal
Cabin Interior Modification for Microgravity TestingThis contract involves the redesign and installation of a modified cabin interior specifically tailored for microgravity testing at NASA's Armstrong Flight Research Center. The work includes creating specialized test platforms, restraints, and environmental systems to support microgravity experiments. The project is categorized under NAICS code 336412, indicating its focus on aerospace product and parts manufacturing. The place of performance is Ardmore, with a zip code of 73401, where the modifications and installations will take place. This subcontract aims to enhance the capabilities of the test cabin to simulate microgravity conditions accurately, facilitating critical research and development efforts in spaceflight and related fields. The contract was posted on June 9, 2026, by the National Aeronautics and Space Administration, reflecting ongoing commitments to advancing space research infrastructure.
Aircraft Engine and Engine Parts Manufacturing

POSTED

2 months ago

DEADLINE

N/A
View Details