Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

34--WELDING ACCESSORY K

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This predicted recompete opportunity involves a contract for welding accessory kits managed by the DLA Troop Support under the Department of Defense. The current contract, SPE8E526P0836, is held by Linmarr Associates, Inc. with a total value of 296,157.40 dollars. The existing agreement is priced as a firm fixed price and was competed under SAP, with a potential end date of October 27, 2026. The upcoming requirement is classified as likely to be recompete with a medium confidence level of 65 percent. The procurement falls under NAICS code 333992 and is being coordinated through the office in Philadelphia, Pennsylvania. Primary contact for this pre-forecast opportunity is Ira Hedgepeth.

General Info

DLA Troop Support predicted recompete for welding accessory kits under NAICS 333992.

Agency

Department Of Defense → DLA Troop Support

NAICS

333992 - Welding and Soldering Equipment Manufacturing

Place of Performance

PA, 926181601, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedApr 27

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Troop Support

Contacts1 person available

OfficePHILADELPHIA, PA, 19111-5096, USA

Organization / AgencyDepartment Of Defense → DLA Troop Support

Office AddressPHILADELPHIA, PA, 19111-5096, USA

Contacts

Ira Hedgepeth

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: SPE8E526P0836 Incumbent: LINMARR ASSOCIATES, INC. Contract Value: $296,157.4 Potential End Date: 2026-10-27T00:00:00.000Z Competition: COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 65/100)
https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=62012a17d52544108a3be10de2871a9b

Similar Contracts

Same NAICS industry code

HANDLE, TORCH ASSEMB

Solicitation # SPE8E5-27-T-0323

Solicitation SPE8E5-27-T-0323 is a request for quotations from the DLA Troop Support Construction and Equipment office for the procurement of 15 units of Torch Assembly Handles, identified by NSN 3433-01-323-2131 and material number 3433013232131. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is September 28, 2027, with a need ship date of April 26, 2027, and a delivery timeline of 167 days after order. Inspection and acceptance will take place at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Special restrictions are in place regarding the use of mercury and hexavalent chromium, and hazardous materials must be labeled according to the Hazard Communication Standard and IP025. Payment will be processed electronically via the Wide Area WorkFlow system. The award process may utilize the HUBZone price evaluation preference, and offerors must comply with the Buy American Act, the Berry Amendment, and various cybersecurity requirements, including NIST SP 800-171 and DFARS 252.204-7012. All quotes must be submitted through the DLA Internet Bid Board System.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

ELECTRODE, WELDING

Solicitation # SPE8E9-27-T-0309

Solicitation SPE8E9-27-T-0309 is a request for quotations issued by DLA Troop Support, Construction and Equipment MRO SVC I for the procurement of 34 spools of welding electrodes, specifically type MIL-316L, Class 1B, with a diameter of 0.035 inches. Each spool is specified as weighing 2 pounds. This is a Qualified Products List item, meaning the manufacturer must be QPL approved at the time of the contract award. The items must adhere to basic specification MIL-E-19933E(1) Revision E and are subject to destination inspection and acceptance. The delivery is required by May 22, 2027, with a need ship date of April 26, 2027, and is shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. Packaging requirements are stringent, requiring the unit container to be a hermetically sealed can in accordance with MIL-STD-2073-1E and ASTM-D-3951-98, with palletization following RP001 and MIL-STD-147. Marking must comply with MIL-STD-129. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on the use of mercury and hexavalent chromium. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 10 hours ago

DEADLINE

SOLDER, TIN ALLOY

Solicitation # SPE8E5-27-T-0368

Solicitation SPE8E5-27-T-0368 is issued by the Defense Logistics Agency Troop Support Construction and Equipment office for the procurement of tin alloy solder, specifically part number 95551 from J. W. Harris Co. Inc. The requirement consists of one unit under NSN 3439016978876, with a required delivery date of October 23, 2026, and a delivery lead time of 20 days after receipt of order. Shipping is designated as FOB Origin, with the destination and acceptance point located at the Carl Pipkin USAR Center in Beaumont, Texas. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific protocols for packaging, marking, and labeling per MIL-STD-129 and RP001. Hazardous materials must be packaged according to TQ requirement IP025 and labeled per the Hazard Communication Standard, while non-hazardous materials follow ASTM D3951. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS regulations regarding the Buy American Act, NIST SP 800-171 cybersecurity assessments, and the prohibition of covered defense telecommunications equipment. Award evaluation may include HUBZone price preferences and other socioeconomic set-asides under NAICS code 333992.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE8E6-27-T-0393

Solicitation SPE8E6-27-T-0393 is a fixed-price procurement issued by the DLA Troop Support Construction and Equipment office for the supply of welding rods, identified by NSN 3439010549640. The requirement consists of a single line item for a quantity of 19 units. Delivery is required within 167 days after the order is placed, with an original required delivery date of March 5, 2027, and a need ship date of April 26, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, where both inspection and acceptance will occur. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Due to the nature of the materials, compliance with IP025 and DFARS 252.223-7001 for the handling and labeling of hazardous materials is mandatory. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. This solicitation includes specific regulatory requirements such as the Buy American Act, Berry Amendment, and DFARS cybersecurity reporting standards, and it offers a price evaluation preference for HUBZone small business concerns.

DLA DIST SAN JOAQUIN

POSTED

about 10 hours ago

DEADLINE

TORCH SET, SELF IGNITIN

Solicitation # SPE8E5-27-T-0317

Solicitation SPE8E5-27-T-0317 is a procurement request by the Defense Logistics Agency (DLA) for 62 units of self-igniting propane torch sets, identified by NSN 3433-01-161-4998. The required equipment must feature an instant flame ignitor capable of over 30,000 uses and produce a flame of 2,000 degrees Fahrenheit, designed for use with disposable propane bottles, which are not included in the set. The procurement is managed by DLA Distribution San Joaquin, with a required delivery date of February 8, 2027, and a need ship date of April 26, 2027. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination in Tracy, California. The contract mandates strict adherence to DLA packaging and marking standards, requiring compliance with MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials must comply with TQ requirement IP025 and the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Quotations were due by November 9, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 10 hours ago

DEADLINE

HOLDER, ELECTRODE, WELDI

Solicitation # SPE8E6-27-T-0454

This fixed-price solicitation, issued by the Defense Logistics Agency (DLA) Troop Support Construction and Equipment (Class IV), is for the procurement of two welding electrode holders under NSN 3439211098141. The contract requires delivery to the Rotational Force Korea at Camp Casey in Dongducheon, South Korea, with an original required delivery date of October 26, 2026, and a delivery lead time of 20 days after the order. The procurement is governed by NAICS code 333992 and includes specific requirements for the Buy American Act and the Berry Amendment for materials above the micro-purchase threshold. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and DLA Packaging Requirements for Procurement (RP001), with all shipments delivered FOB Origin. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous material identification, and the prohibition of certain telecommunications equipment. Quotations are due by November 9, 2026, to the issuing office in Philadelphia, Pennsylvania.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

TIP, WELDING TORCH

Solicitation # SPE8E5-27-T-0314

Solicitation SPE8E5-27-T-0314 is a request for quotations for the procurement of 81 welding torch tips, identified by NSN 3433-00-628-7680. The required items must include the mixer and nut and be fully compatible with Victor 300 series welding torches. Acceptable part numbers include Victor Equipment Co 0323-0111 and UniWeld Products Type 4 Size 00. Delivery is required within 167 days after order, with an original required delivery date of April 20, 2027, shipping to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-129, MIL-STD-2073-1E, and ASTM-D-3951-98, with palletization following DLA requirement RP001. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of hexavalent chromium. The procurement falls under NAICS code 333992 and is managed by DLA Troop Support, Construction and Equipment.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE8E5-27-T-0312

Solicitation SPE8E5-27-T-0312 is a small business set-aside procurement issued by the Defense Logistics Agency for 67 units of aluminum alloy filler welding rods. The required material must conform to AWS A5.10/A5.10M-17 and Federal Specification QQ-R-566, specifically 1/16 inch diameter and 36 inches in length. Delivery is required within 50 days after order, with a need ship date of October 31, 2026, and a final delivery destination of DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and RP001. Suppliers must provide Safety Data Sheets and compliant labeling per 29 CFR 1910.1200 for any hazardous materials. Key regulatory requirements include the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and a prohibition on the intentional addition of mercury. Invoicing and payment must be processed electronically through the Wide Area Workflow system. Quotations are due by November 9, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 10 hours ago

DEADLINE

TRANSFORMER, POWER

Solicitation # SPE4A6-27-T-7432

Solicitation SPE4A6-27-T-7432 is a request from the Defense Logistics Agency for the procurement of 10 power transformers, identified by NSN 5950014450910 and Northrop Grumman part number 782R567G01. The requirement is designated as a critical application item with a need ship date of April 6, 2027, and an original required delivery date of July 5, 2029. Delivery is established as FOB Origin, with both inspection and acceptance occurring at the origin. The procurement is managed under the First Destination Transportation program to optimize shipping costs via government-arranged transportation to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and technical standards, requiring manufacturers to maintain an inspection system compliant with ISO 9001:2015. Key technical requirements include CMMC Level 2 self-assessment, adherence to MIL-STD-129 for marking, and compliance with DLA packaging requirements under RP001 and MIL-STD-2073-1E. Hazardous materials must be handled and labeled according to IP025 and 29 CFR 1910.1200. While the solicitation is not a small business set-aside, it incorporates the DLA Master Solicitation for Automated Simplified Acquisitions and requires electronic invoicing through the Wide Area WorkFlow system. All quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE8E9-27-T-0298

Solicitation SPE8E9-27-T-0298 is a small business set-aside request for quotations issued by the DLA Troop Support Construction and Equipment MRO Service I for the procurement of 29 light-duty, hand-held oxyacetylene welding torches, identified by NSN 3433002559332. The items must meet the requirements of CID A-A-59350 and are subject to strict material restrictions, including a prohibition on the intentional addition of mercury or mercury-containing compounds. The contract specifies a delivery lead time of 20 days with a need ship date of October 28, 2026, and a required delivery date of December 3, 2026. Delivery is FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. The procurement includes rigorous packaging and marking standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All wooden pallets must be heat-treated and IPPC stamped to ensure they are pest-free for overseas shipment, as failure to comply will result in the rejection of materials. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Certified HUBZone small business concerns may receive a price evaluation preference under FAR 52.219-4.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE8E5-27-T-0367

This solicitation, issued by the Defense Logistics Agency (DLA) Troop Support Construction and Equipment office, is for the procurement of five cartons of welding rods under NSN 3439-00-262-4285. The specified material consists of rods measuring 3/16 inch in diameter and 39 inches in length, with each carton weighing 2 lbs. Delivery is required within 10 days after receipt of the order, with the place of performance and delivery located at Fort Riley, Kansas. The contract is established as FOB Origin and requires destination inspection and acceptance. The procurement is subject to strict technical and quality requirements, including DLA packaging requirements (RP001) and marking standards per MIL-STD-129. Specific attention is required for magnesium alloy rods containing radioactive thorium, which must bear appropriate radiation warning labels. Compliance with the Buy American Act and the Berry Amendment is mandatory for quotes exceeding the micro-purchase threshold. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and reporting, as well as adherence to DFARS regulations regarding safeguarding covered defense information and cyber incident reporting.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE8E6-27-T-0455

Solicitation SPE8E6-27-T-0455 is a procurement request by the Defense Logistics Agency for welding rods under NSN 3439-00-008-5067. The requirement is for four units, with each unit consisting of 10 pounds of rods measuring 0.045 inches in diameter and 36 inches in length. The items must be delivered to Fort Riley, Kansas, with a required delivery date of October 23, 2026, and a delivery window of 10 days after receipt of order. Inspection and acceptance will take place at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E, and follow DLA packaging requirements for procurement (RP001). All quotes must be submitted through the DLA Internet Bid Board System (DIBBS). The contract incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information. Invoicing and payment must be processed electronically via the Wide Area WorkFlow (WAWF) system.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Troop Support

Same awarding agency

Heavy Equipment Freight HaulingThis subcontract for Heavy Equipment Freight Hauling involves the transportation of packaged dehumidifier units for prime contractors under DLA Troop Support. The scope of work requires hauling industrial equipment from supplier origins to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. To accommodate the dimensions of the equipment, carriers must utilize either flatbed or dry van trailers. The contractor is required to maintain full compliance with DOT certifications and adhere to DLAD Proc Notes C19 and C20. This opportunity falls under NAICS code 484220 and is associated with the Department of Defense. The response deadline for this requirement is November 30, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Crating ServicesThis subcontract for MIL-SPEC Packaging and Crating Services involves providing specialized military-grade packaging, marking, and palletization for prime contractors supporting DLA Troop Support equipment contracts. The scope of work requires strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Specific technical requirements include the application of packaging data such as QUP:001, PRES MTHD:10, and CLNG/DRY:1 using industrial crating materials to ensure units are ready for FOB Origin shipment. The project is managed under NAICS code 488410 and will be performed in Philadelphia, Pennsylvania. Interested parties must note that the response deadline is November 30, 2026, at 9:30 AM. This effort supports the Department of Defense through the DLA Troop Support agency to ensure equipment is securely prepared for military transport.

Motor Vehicle Towing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Electric Desiccant Dehumidifier SupplyThis subcontract involves the procurement and delivery of electric desiccant dehumidifiers to support prime contractors under DLA Troop Support supply contracts. The scope of work requires the provision of 71 to 142 units that match Munters Corporation Part Number GC-150 30116A, identified by NSN 4440-01-699-4396. All hardware must be delivered as completed units and strictly adhere to the DLA Master List of Technical and Quality Requirements. The contractor is further responsible for providing technical data packages to facilitate the evaluation of any alternate parts. This effort is managed under NAICS code 423440 for the Department of Defense, with the place of performance located in Philadelphia. The response deadline for this opportunity is November 30, 2026.

Other Commercial Equipment Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Laser Assembly Outsert Manufacturing & SupplyThis subcontract involves the manufacturing and supply of specialized Laser Assembly Outserts for prime contractors supporting DLA Troop Support CBRN Personal Protective Equipment projects. The selected provider must produce parts according to Part Number 71014/11, also known as NSN 4240-01-528-9288, while strictly adhering to Contractor First Article and Production Lot Test quality standards. To be eligible, contractors must hold US/Canada Joint Certification Program certification and maintain active DIBBS/EDI registration. The performance of this contract is centered in Philadelphia, with a response deadline set for November 13, 2026.

All Other Plastics Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Clear Assembly Outsert Manufacturing & SupplyThis subcontract involves the manufacturing and supply of 60,000 specialized Clear Assembly Outserts for prime contractors supporting DLA Troop Support CBRN Personal Protective Equipment projects. The parts must be produced according to Part Number 71014/12 and NSN 4240-01-529-8327, with strict adherence to Contractor First Article and Production Lot Test quality standards. Performance for this contract is centered in Philadelphia. To be eligible, providers must hold US/Canada Joint Certification Program certification and maintain active DIBBS/EDI registration. The opportunity is categorized under NAICS code 326199 and is managed under the Department of Defense. Interested parties must meet the response deadline of November 13, 2026.

All Other Plastics Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

First Destination Transportation and Packaging Services

Freight Transportation Arrangement

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Manufacturing and Supply of Referenced Item

All Other Miscellaneous Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Packaging and Distribution Services for Chemical Light ProductsThis subcontract for Packaging and Distribution Services for Chemical Light Products supports prime contractors under DLA Troop Support. The scope of work involves the specialized packaging of light sticks into boxes and packages according to specific CLIN requirements, utilizing military-grade materials and DLA labeling standards. Logistics are executed via Customer Direct and Depot Direct delivery to government endpoints under FOB Origin shipping terms. The project falls under NAICS code 493110 and is managed by the Department of Defense. Performance is centered in the 19111 zip code area, with the primary objective of delivering properly packaged and labeled shipments that meet all government inspection and acceptance criteria.

General Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

Chemical Light Stick Manufacturer (Multiple NSNs)This subcontract opportunity involves the manufacture and supply of chemical light sticks for prime contractors supporting DLA Troop Support. The scope of work requires the production of light sticks in three specific lengths—1.5-inch, 7.5-inch, and 15-inch—available in a variety of colors including Yellow, Red, Orange, Green, White, Infrared, and Ultra Orange. Products must be engineered for durations ranging from 5 minutes to 12 hours and include Flex Band versions, all while strictly adhering to DLA National Stock Number specifications. The selected provider will be responsible for delivering 26 distinct NSNs utilizing either Customer Direct or Depot Direct shipping methods. This requirement falls under NAICS code 335139 and is managed by the Department of Defense. Interested parties must submit their responses by November 12, 2026.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Synopsis for Outserts (NSN - 4240-01-529-8327 & 4240-01-528-9288)

Solicitation # 015298327_015289288

Solicitation SPE8EG-26-R-0003 is an unrestricted, fixed-price with economic price adjustment, indefinite delivery/indefinite quantity contract issued by DLA Troop Support. The procurement is for critical Chemical Biological Radiation and Nuclear Personal Protective Equipment, specifically Clear Assembly Outserts (NSN 4240-01-529-8327) and Laser Assembly Outserts (NSN 4240-01-528-9288). The contract structure consists of a one-year base period and four one-year option periods, with a target delivery schedule of 100 days and terms set as FOB Origin. Avon Protection Systems Incorporated is the approved source, and while alternate offers are encouraged via specific DLAD procurement notes, they require a complete data package for evaluation. The solicitation has undergone five amendments, with the final closing date extended to September 2, 2026, at 3:00 PM EDT. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and export-control regulations under ITAR and EAR, requiring offerors to have approved US/Canada Joint Certification Program certification. Additionally, the contract incorporates FAR 52.222-90 regarding DEI discrimination and clarifies that while Cybersecurity Maturity Model Certification Level 2 is not required for the initial award, it may be necessary for future continued performance. Price is the sole evaluated factor for award.

All Other Plastics Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Dehumidifier Large Buy

Solicitation # 4440-01-699-4396

DLA Troop Support Philadelphia has issued solicitation SPE8E8-26-Q-0367 for the procurement of electric desiccant dehumidifiers under NSN 4440-01-699-4396. The requirement is for a definite quantity of 71 units, with an additional option quantity of 71 units. The approved source for this equipment is Munters Corporation, part number 30116A. This is a firm fixed price contract processed under FAR part 12 for commercial products, with a solicitation closing date of November 30, 2026. The award will be based on a price only selection process, provided the offeror is determined to be responsible and compliant with all solicitation terms. Deliveries are set for December 17, 2026, with the FOB point at origin and the destination located in New Cumberland, Pennsylvania. Inspection and acceptance will occur at the destination. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Invoicing must be processed electronically through the Wide Area WorkFlow system. Offerors must submit proposals via email to Timothy Kitzinger and ensure they remain valid for 120 days following the closing date. Any offerors proposing alternate parts are required to provide a complete technical data package for evaluation.

Industrial Process Furnace and Oven Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Chemical Light Sticks (26 NSNs) – Five-Year Long-Term Contract

Solicitation # SPE8EG27R0001

The Defense Logistics Agency Troop Support, Construction and Equipment office is seeking a firm-fixed-price, long-term contract under solicitation SPE8EG27R0001 for the supply of chemical light sticks and related products. The requirement covers 26 National Stock Numbers, including various sizes and colors such as 1.5-inch yellow, 7.5-inch flex band red, and 15-inch infrared and ultra orange sticks. The contract is structured with a total ordering period of five years, consisting of a two-year base period followed by three one-year option periods. This acquisition is conducted on an unrestricted basis under NAICS code 335139, allowing all responsible sources to submit offers via SAM.gov. Large business offerors are required to provide a Small Business Subcontracting Plan with their proposals. Logistics for the contract include both Customer Direct and Depot Direct delivery methods, with inspection and acceptance occurring at the destination. The primary point of contact for this effort is Jessica Sheaffer.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

DLA Maritime - Puget Sound

POSTED

over 1 year ago

DEADLINE

ELECTRODE,WELDING

Solicitation # N0010424QFA69

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # N0010425QFD75

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

NG SEW Pneumatic Components new comment

Solicitation # W519TC25Q2124

POSTED

over 1 year ago

CLOSED

over 1 year ago

FEEDER, WIRE, WELDING

Defense Logistics Agency

POSTED

over 1 year ago

DEADLINE

Intent to award sole source

Solicitation # M6700125Q1021

Commanding General

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE7M125U0127

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Weld Fume Extractor

Solicitation # W51AA125Q0044

W6QK Acc-Apg Cont Ct Tyad Ofc

POSTED

over 1 year ago

CLOSED

over 1 year ago

Welding Simulator

FA4608 2 Cons Lgc

POSTED

over 1 year ago

DEADLINE

34--TORCH OUTFIT,CUTTIN

Solicitation # SPE8E525T3069

DLA Troop Support

POSTED

over 1 year ago

CLOSED

over 1 year ago

34--WELDING SET,GAS SHI

Solicitation # SPE8E525T2670

DLA Troop Support

POSTED

over 1 year ago

CLOSED

over 1 year ago

34--WELDING MACHINE,ARC

Solicitation # SPE8E525T2842

DLA Troop Support

POSTED

over 1 year ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS