This Sources Sought opportunity from Department Of Veterans Affairs was posted on June 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

3930--CARGO TRUCK

Closed

36C26226Q1045Federal

Submission Closed07/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336110

New

DIBBS

Aluminum Vehicular Seat SupplierThis subcontract involves the supply of finished aluminum vehicular seats for prime contractors supporting DLA supply contracts. The supplier is responsible for manufacturing or sourcing seats that strictly adhere to NSN 2540-00-439-2790 and the DLA Master List of Technical and Quality Requirements RA001. While the use of additive manufacturing equipment is permitted, it remains subject to ESA approval. The contract is managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, with performance located in Tracy, California. To be eligible, suppliers must maintain CMMC Level 2 certification and ensure full compliance with the Buy American Act. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Infantry Squad Vehicle Follow-On Market Questionnaire

Solicitation # W912CH-27-RFI-ISV-0001

The United States Army, through the Product Director, Ground Mobility Vehicles, is conducting a market survey via Request for Information W912CH-27-RFI-ISV-0001 to identify capable industry partners for the continued development, production, and sustainment of the Infantry Squad Vehicle family. The initiative focuses on two primary platforms: the ISV-9, designed for a nine-soldier squad, and the ISV-Utility, designed for a five-soldier squad with a cargo utility bed. The government intends to procure a total potential quantity of approximately 20,787 vehicles, with a target contract award in July 2028 and initial deliveries anticipated to begin in the fourth quarter of Fiscal Year 2029. This RFI is used to assess the industrial base's capacity and determine the optimal acquisition strategy. Key technical requirements include compliance with Federal Motor Vehicle Safety Standards for roll-over protection, adherence to MIL-STD-814 and MIL-STD-209K for tie-down provisions, and transportability dimensions defined by MIL-STD-1366 and MIL-HDBK-1791. The government requires unlimited rights to all form, fit, and function data, as well as all training and maintenance materials. Interested respondents must be registered in the System for Award Management and provide detailed information regarding their socioeconomic status, security capabilities for handling Controlled Unclassified Information, and experience with Automotive Industry Action Group quality tools. Responses are due by November 25, 2026.

POSTED

DEADLINE

Vehicular Transparent Armor ManufacturerThis subcontract involves the manufacture and supply of 76 units of ballistic-grade transparent vehicular window armor for prime contractors under DLA supply contracts. The contractor is responsible for fabricating the armor glass to specific dimensions according to NSN 2541016002079 and ensuring that a removable adhering film is applied to protect the surfaces from scratches during transit. The project falls under NAICS code 336110 and is managed by the Department of Defense through the DLA Weapons Support Land Supplier Operations. To ensure security and compliance, the contractor must strictly adhere to DFARS 252.204-7012 and CMMC Level 2 standards.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

G5300 - GEM EL XD ELECTRIC GOLF CARTThe Western Area Power Administration, under the Department of Energy, has issued a forecast for the procurement of GEM EL XD electric golf carts. This requirement is categorized under NAICS code 336110 and is currently associated with incumbent contractor Federal Contracts LLC. The forecast was posted on October 25, 2026, and is managed by the Small Business Program Managers. Interested parties can find further details through the official Department of Energy acquisition forecast public link.

Western Area Power Administration

POSTED

DEADLINE

City of Airdrie - Negotiated Request for Proposal - Supply and Delivery of Municipal Enforcement Vehicles

Solicitation # AB-2026-07106

The City of Airdrie is seeking quotes for the supply and delivery of new Municipal Enforcement Vehicles under solicitation number AB-2026-07106. The procurement plan involves the acquisition of approximately eleven units over a three year term, with a specific expectation of eight units in 2027, contingent upon budget approval. Interested parties must submit their responses by the deadline of November 19, 2026, at 8:00 PM. The contract will be performed in Airdrie, Alberta, and inquiries can be directed to the Procurement Specialist, Mohana Delli, via the City of Airdrie procurement services.

POSTED

DEADLINE

Vehicular Anti-Lock Brake Sensor SupplierThis subcontract involves the procurement of 56 Vehicular Anti-Lock Brake Sensors, identified by NSN 2530015750761, to support prime contractors under DLA supply contracts. The selected supplier is responsible for manufacturing or sourcing these sensors in strict accordance with RA001 technical and quality requirements. Specific material restrictions are in place, prohibiting the use of mercury, hexavalent chromium, and unauthorized additive manufacturing processes. The contract mandates full compliance with the Buy American Act and the Berry Amendment, alongside adherence to DFARS 252.204-7012 cybersecurity standards. Managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations, the performance of this contract is centered in New Cumberland. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

PARTS KIT, WINDSHIELD W

Solicitation # SPE7M4-27-T-1649

Solicitation SPE7M4-27-T-1649 is a fixed-price procurement issued by the DLA Weapons Support Fluid Handling Division for 39 units of a windshield wiper parts kit, identified by NSN 2090-01-494-7233 and part number IM-CVN-221. The contract is not a small business set-aside and is issued under the First Destination Transportation program with terms set as FOB Origin. The required delivery date is March 1, 2027, with a need ship date of April 20, 2027, for delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-2073-1 Appendix D for kits, and MIL-STD-129 for marking. Palletization must comply with RP001 DLA requirements. Special material restrictions apply, including the Buy American Act, the Berry Amendment, and a prohibition on the intentional addition of mercury. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Offerors must also certify that they do not provide covered telecommunications equipment or services per FAR 52.204-24 and DFARS 252.204-7016.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # W911S227U0068

Solicitation W911S227U0068 is a Request for Quotation issued by the Department of Defense for the W6QM Micc-Ft Drum office in Fort Drum, New York. This procurement is a total small business set-aside under NAICS code 336110. The contract seeks the acquisition of new equipment only, specifically one red 4-post alignment lift with a 22,000lb capacity, 194 inch wheelbase, and 41 inch ramps. The preferred brand is Rotary part number ARO22, though equal products are acceptable if they meet the specified salient physical, functional, and performance characteristics and are supported by descriptive literature. The scope of work includes the lift and several accessories, including two rolling jacks, two radius gauges, and one set of slip plates with internal air, as well as professional installation and training. Award will be granted to the responsible offeror whose proposal is most advantageous based on price and technical evaluations. Delivery is requested within 30 days on an F.O.B. destination basis. All quotes must be submitted electronically via the PIEE Solicitation module. The contract incorporates various federal regulations, including sustainable product standards, Buy American certifications, and cybersecurity reporting requirements.

POSTED

DEADLINE

2026-002 One (1) NEW 2027 Fire Rescue Duty Truck

Solicitation # 2026-002

The District of 100 Mile House in British Columbia is soliciting quotations for the procurement of one new 2027 Fire Rescue Duty Truck. The required vehicle must be a 2027 Ford F-350 XLT Crew Cab or an acceptable one-ton equivalent, featuring a gasoline V8 engine, 4x4 SRW, long box, and a heavy-duty towing package. Key specifications include a LEER canopy matching existing department trucks, a BedSlide 2000 HD contractor tray, Whelen warning light systems, a Kenwood analog VHF mobile radio with five portable units, a Havis 30-inch center console, and a Setina PB400 aluminum push bumper. The vehicle must be delivered by February 1, 2027, and include specific high-visibility graphics, such as red/lime rear chevrons, Z-style side striping, and department logos, all of which require District approval before production. Quotations must be submitted in a sealed envelope to Sheena Elias, Director of Finance, by 2:00 p.m. local time on November 6, 2026. Bidders must use the provided Quotation Bid Sheet, ensure the bid remains valid for 30 days, and provide a total quoted price including taxes and freight. Evaluation is based on technical compliance, delivery timelines, and price, though the lowest quotation is not guaranteed acceptance. Successful bidders must provide a WorkSafeBC Clearance Letter, a valid District of 100 Mile House Business Licence if applicable, and acceptable insurance. The District reserves the right to conduct inspections at the upfitter's facility and requires complete electrical diagrams and equipment manuals upon delivery.

District of 100 Mile House

POSTED

DEADLINE

Eight (8) Trucks for the Community Recreation and Events Department & Cheyenne Fire Rescue Department

Solicitation # E-5-27

Solicitation E-5-27 is an invitation for bids to provide eight new 2026-2027 model year trucks for the City of Cheyenne, Wyoming, supporting the Community Recreation and Events Department and the Cheyenne Fire Rescue Department. The procurement includes one 1-ton pickup with a plow for Parks, four mid-size pickups for various administrative and facility roles, and three heavy-duty utility pickups for Fire Rescue support, training, and inspection. Award is based on the total bid amount, with a 5% resident preference for Wyoming bidders. A bid guarantee of 5% is required for total bids exceeding 75,000 dollars. The successful vendor must handle all procurement, upfitting, and graphics installation, ensuring that Fire Rescue vehicles match existing fleet designs and adhere to standard wiring specifications. Final acceptance requires a functional demonstration of all emergency warning systems to a representative from Cheyenne Fire Rescue. Bidders must strictly use the provided bid forms and a specific exceptions worksheet to avoid disqualification. Compliance with the Drug-Free Workplace Act of 1988, EEOC, and ADA requirements is mandatory. Payment terms are net 30 days based on actual quantities received.

POSTED

DEADLINE

Speed Feedback Sign SupplierThis subcontract opportunity is for a supplier to provide specialized digital speed feedback signs to prime contractors working on Maryland State Highway Administration projects. The selected supplier must ensure that all delivered signage strictly adheres to the Speed Feedback Sign for ASE Specification as detailed in Appendix 12 of the contract requirements. The solicitation was posted on October 21, 2026, with a response deadline set for November 20, 2026. Falling under NAICS code 336110, this procurement is managed by the State of Maryland's State Highway Administrator.

State Highway Administrator

POSTED

DEADLINE

Purchase of one (1) 2026 - 14 passenger minibus

Solicitation # 26928

The Town of Smithfield is soliciting proposals for the purchase of one 2026 14-passenger minibus for the Smithfield School Department, with a required delivery date prior to June 30, 2027. Vendors must provide a detailed vehicle description of all options and include a separate line item cost for the installation of an ADA-compliant wheelchair lift as an alternate. The vehicle must meet specific safety and visibility standards, including multiple emergency exits, a roof escape hatch, a factory-integrated backup camera and alarm, and powered heated exterior side mirrors with wide-angle blind-spot attachments. Proposals are due by October 30, 2026, and must be signed in ink, consisting of one original and three copies. Evaluation is based on a 100-point scale, weighted by pricing (35 points), company information and years in business (20 points), submission of required documents (20 points), status with the Rhode Island MPA or Government Purchasing Co-op (20 points), and whether the business is located in Smithfield (5 points). The Town Council will select a firm based on the evaluation committee's recommendation, subject to final action by the School Committee. Successful bidders must provide a certificate of insurance within five days of the award and certify they are not debarred or suspended from government participation. Additionally, the procurement mandates that MBEs and WBEs certified by the State of Rhode Island be awarded a minimum of 15 percent of the total project dollar value.

Town of Smithfield

POSTED

7 days ago

DEADLINE

in 1 day

AI Contract Overview

This Request for Information (RFI) / Sources Sought Notice, issued under solicitation number 36C26226Q1045 by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22, is strictly for market research and planning purposes and does not constitute a solicitation or invitation to bid. The government seeks information on potential vendors capable of providing two electric-powered industrial utility vehicles, specifically the Taylor-Dunn Stepsaver SS5-46 or an equivalent model, for use at the Long Beach VA Healthcare System. The vehicles must meet stringent technical specifications including a minimum load capacity of 2,000 to 3,000 pounds, towing capacity of 5,000 to 10,000 pounds, range of 24 to 60 miles per charge, electric drive system with at least 7.6 HP, rack and pinion steering, hydraulic braking, onboardcharger, and compliance with OSHA 1910.178 (Type E) and ANSI B56.8 standards. Additional required features include a minimum one-year warranty, non-marking tires, LED lighting, reverse alarm, driver seat interlock, and an optional enclosed or heated cab. The vehicles must also align with Buy American Act requirements and be manufactured in the United States or meet applicable exceptions. Respondents are required to submit detailed capability statements addressing each salient characteristic, including whether they can meet, exceed, or cannot meet the specified requirements. They must provide their business size status under NAICS code 336110, confirm whether they are manufacturers, authorized distributors, or resellers, and verify compliance with the Non-Manufacturer Rule and limitations on subcontracting per 13 CFR §125.6. Information on Commercial Off-the-Shelf status, Federal Supply Schedule or other government contract holdings, lead times for delivery, estimated product lifespan, support services, leasing options, and country of origin and manufacturing site details are also requested. Pricing information is encouraged solely for market research and will not influence any future award decision. Responses must be submitted via email to [email hidden] no later than July 9, 2026, at 10:00 AM PST, and must include the respondent's SAM.gov Unique Entity ID and Cage Code. All responses will be used exclusively to assess market capability and inform potential future solicitations, with no obligation or commitment from the government

General Info

VA seeks electric utility vehicles with 2,000–3,000 lb capacity, AC/DC motor, safety features, and Buy American compliance for market research.

Agency

Department Of Veterans Affairs → 262-NETWORK Contract Office 22 (36C262)

NAICS

336110 - Automobile and Light Duty Motor Vehicle Manufacturing

Place of Performance

Department of Veterans Affairs VA Long Beach Healthcare System, Long Beach, AZ, 90822, USA

Set-Aside

NONE

Documents

RFI 36C26226Q1045 for Electric Cargo Trucks

sources-sought

High

RFI Sources Sought Notice for Electric-Powered Industrial Utility Vehicle 36C26226Q1045

sources-sought

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 30

Sources Sought

Response DeadlineJul 9

Deadline has passed

Submission Closed

07/09/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Veterans Affairs → 262-NETWORK Contract Office 22 (36C262)

Contacts1 person available

OfficeGilbert, AZ, 85297, USA

Organization / AgencyDepartment Of Veterans Affairs → 262-NETWORK Contract Office 22 (36C262)

Office AddressGilbert, AZ, 85297, USA

Contacts

Sam ChooContract Specialist

contact@example.gov

Full Description

THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION. SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e).
DISCLAIMER This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI.
SOURCES SOUGHT/RFI DESCRIPTION
This is NOT a solicitation announcement. This is a Sources Sought Notice / RFI only. The purpose of this Sources Sought Notice / RFI is to gain information about potential qualified sources and their size classification relative to NAICS 336110 Automobile and Light Duty Motor Vehicle Manufacturing / PSC 3930 Warehouse Trucks and Tractors, Self-Propelled. Responses to this Sources Sought Notice / RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought Notice / RFI, further RFIs and/or a solicitation or other announcements may be published.
The purpose of this contract is to acquire Electric-powered industrial utility vehicle, Taylor Dunn Stepsaver SS5 46 (SS 546) electric personnel/burden carrier or equal. A total of two (2) carriers/trucks are required. Salient Characteristics to meet or exceed: Type & Model Device Type: Electric-powered industrial utility vehicle (burden/personnel carrier) for material, supply, and personnel transport in healthcare, government, and industrial settings. Manufacturer: Taylor-Dunn Manufacturing (or authorized vendor of Taylor-Dunn). Model: Specify current model (e.g., Bigfoot S, B-248, B-210 GT, or agency-selected model). Capacity & Performance Load Capacity: Minimum 2,000 3,000 lbs. (model dependent). Towing Capacity: Minimum 5,000 10,000 lbs. Speed: Up to 11 18 mph (depending on configuration). Range: Minimum 24 60 miles per full charge. Person Capacity: 2 4 operator/passenger seats. Controls & Operation Drive System: Electric, with AC or DC motor (minimum 7.6 HP for most models). Steering: Rack and pinion steering, automotive-style controls. Breaking: Hydraulic drum or disc brakes; hand-operated parking brake. Charger: Onboard automatic charger included. User Interface: Keyed ignition, multi-function battery indicator, hour meter, self-diagnostic controller. Safety Features: Reverse alarm, dual LED headlights, taillights, brake lights, shutoff timer, driver s seat interlock. Power & Electrical Requirements Battery: Lead acid, AGM, or lithium-ion options available; minimum 36V or 48V system. Charge Time: 8 13 hours from depleted to full, depending on battery type and charger. Construction & Materials Frame: Fully welded, unitized steel (12- or 16-gauge, diamond plate or smooth skin). Body: Durable powder-coated finish; corrosion resistant. Deck/Bed Size: Minimum 44" x 65" up to 54" x 77" (model-specific). Suspension: Multi-leaf springs with front and rear shock absorbers. Tires: Pneumatic, load-rated for industrial/commercial use. Cabin: Optional enclosed cab, heated cab, or stake-side kit available. Dimensions & Weight Typical Dimensions: Approximately 118 131" L x 44 57" W x 51 52" H, depending on model/configuration. Unit Weight: 1,500 1,950 lbs. (varies with features). Other Features & Accessories Accessories: Beacon light, toolbox, removable vinyl doors, non-marking tires, ladder rack (as required). Operator Comfort: Adjustable seat(s), wide operator compartment, ergonomic controls, low step height. Compliance: Must conform to OSHA 1910.178 (Type E), ANSI B56.8, and applicable institutional safety standards. Warranty: Minimum 1-year warranty on vehicle and drive system
If your company is interested and capable of providing the required supplies/services, you MUST provide the information indicated below OR your intent, interest to participation, and information provided will not be considered as valid for research purposes. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Submit your capabilities statement illustrating how your organization can/cannot meet the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements. For instances where your company cannot meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please explain. For instances where your company can meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please show how your company meets/exceeds each requirement. (2) Please review the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements and provide any additional feedback or suggestions. If none, please reply as N/A. (3) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc. (4) Is your company considered small under the NAICS code identified in this RFI? (5) Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services described in the list of DRAFT/SALIENT CHARACTERISTICS/SOW? (6) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available). (7) If you re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified. (8) Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR Â§ 125.6? (9) Are the items you are identifying/providing considered Commercial of the Shelf (COTS) items as defined in FAR Part 2.101 under commercial items? (10) Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-Manufacturer rule? Specifically, does your company: (i) Does not exceed 500 employees (or 150 employees for the Information Technology Value Added Reseller exception to NAICS Code 541519, which is found at Â§ 121.201, footnote 18); (ii) Is primarily engaged in the retail or wholesale trade and normally sells the type of item being supplied; (iii) Takes ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice; and (iv) Will supply the end item of a small business manufacturer, processor or producer made in the United States, or obtains a waiver of such requirement pursuant to paragraph (b)(5) of this section. (11) Please indicate whether your product conforms to the requirements of the Buy American Act? Please indicate if manufacturer is/will be US domestic Small Business / US Domestic Large Business / Foreign. (12) What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate. (13) What is estimated life span of your solution? What support/services does that entail? (14) Does your organization offer a leasing solution? Please elaborate. (15) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s). (16) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract. (17) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. (18) Please provide your SAM.gov Unique Entity ID/Cage Code number. (19) Please provide County of origin, manufacturing site information. Responses to this notice shall be submitted via email to contact@example.gov. Telephone responses will not be accepted. Responses must be received no later than Thursday, July 9, 2026 by 10:00 AM PST. All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement.