Top

400 Series Air Filter

Awarded

19Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of State → US Embassy UlaanbaatarView Agency

Contract Value

$29,540

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

Ulannabatar, DC, 14095, MNG

Set-Aside

NONE

Awardee

Export 220Volt INCView Profile

Award Issued Date

01/29/2026, 12:00:00 AM UTC

Documents

(53)

Notice of Bids Asphalt signed.docx

DOCX

Corp Yard - 1405 Charter Oak Ave - Charging Evaluation Report.pdf

PDF

Request for Proposal Form 9.5.2024.pdf

PDF

Corp Yard - 1405 Charter Oak Ave - Cost Estimates.pdf

PDF

Crane Park - 360 Crane Ave - Communities in Charge Incentive Recipient Agreement Wave 3 - Signed 3.pdf

PDF

Bid Form DC-BOP.doc

DOC

Attachment C Woodside Green Parking Improvements.pdf

PDF

2026 Asphalt-Emulsion_Rejuvenatin.docx

DOCX

Attachment J - Wetland Delineations.pdf

PDF

Attachment K - Woodside Green_Hannah Parks Pond Dredge Analysis Report, 2024.pdf

PDF

Form 96.docx

DOCX

Award+PO19MG1026P0034+Export+220V.pdf

PDF

City Hall - 1088 College Ave - TFCA Napa County Guide to TFCA FYE 2025.pdf

PDF

87873 - Plans Hale Street Rehabilitation Project.pdf

PDF

2025 Granite Curbing Advertisement for Bid.pdf

PDF

RFQ - Board of Adjustment Attorney.pdf

PDF

Route 35 Water Main Replacement Project (DOCX).docx

DOCX

WoodsideHannahPondsRFP_2024.pdf

PDF

RFP - EV Chargers at City Lots Final - June 10, 2025_202506101838052119.pdf

PDF

Crane Park - 360 Crane Ave - Cost Estimates.pdf

PDF

Attachment L - Proposal Pricing Form.xlsx

XLSX

Library - 1492 Library Lane - Cost Estimate.pdf

PDF

City Hall - 1088 College Ave - Project Information Form_FYE 2025 - St. Helena.pdf

PDF

Attachment E - Project Area Figure, Hannah Park, 2023 (1).pdf

PDF

BIDDER_NOTICE_PACKAGE 3-5-25.pdf

PDF

Attachment M - Professional Services Contract.pdf

PDF

Attachment A - Project Area Figure, Woodside Green Park, 2023.pdf

PDF

Attachment H - StormWaterManagementAnalysisReport Hannah Park 2006.pdf

PDF

Crane Park - 360 Crane Ave - Charging Evaluation Report.pdf

PDF

Attachment E - Project Area Figure, Hannah Park, 2023.pdf

PDF

BIDDER_PACKAGE 2 4-4-25_202504071336202288.pdf

PDF

Attachment B - Woodside Green Pond Design Info.pdf

PDF

87873 - Final Specs Combined Hale Street Rehabilitation Project.pdf

PDF

Noncollusion Affidavit.doc

DOC

E-Verify Program.doc

DOC

City Hall - 1088 College Ave - St. Helena EV Infrastructure FYE 2026.xlsx

XLSX

Attachment G - Hannah Park Plans.PDF

PDF

Corp Yard - 1405 Charter Oak Ave - Communities in Charge Incentive Recipient Agreement Wave 3 - Signed 2.pdf

PDF

Attachment F - Village at Hannah Farms Subdivision Plans.pdf

PDF

Pipe and Appurtenances.pdf

PDF

City Hall - 1088 College Ave - Cost Estimates.pdf

PDF

Pages from Lawless project asphalt paving project manual 25.pdf

PDF

Attachment D - Woodside Green Firmette.pdf

PDF

City Hall - 1088 College Ave - Charging Evaluation Report.pdf

PDF

Library - 1492 Library Lane - Communities in Charge Incentive Recipient Agreement Wave 3.pdf

PDF

Library - 1492 Library Lane - Charging Evaluation Report.pdf

PDF

Attachment I - 2023 Bathymetric Survey Results.pdf

PDF

City Hall - 1088 College Ave - St. Helena EV Infrastructure FYE 2026.pdf

PDF

RFQ Notice 2026 Professionals.pdf

PDF

Plano QBS 24-001 Hale Street Rehabilitation Project (US 34 to Larson Street).pdf

PDF

FL-ZONINGMAP COLOR-Model (1) (1).pdf

PDF

Suspension and Debarment Certification

DOCX•1 page•other

Bidders Insurance Requirements for Daviess County Contract

DOC•2 pages•other

AI Contract Breakdown

Uniform Contract Format

Timeline

3 updates

PhaseAwarded

PostedAug 11

Combined Synopsis

Amendment 1Aug 18

Contract was updated

Amendment 2Jul 28

Contract was updated

Amendment 3Jul 28

Contract was updated

AwardedJan 29

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of State → US Embassy Ulaanbaatar

Contacts1 person available

OfficeWASHINGTON, DC, 20520, USA

Organization / Agency

Department Of State → US Embassy Ulaanbaatar

View Agency Profile

Office AddressWASHINGTON, DC, 20520, USA

Contacts

contact@example.gov

Full Description

Fixed price, competetive Award

Similar Contracts

Same NAICS industry code

NAICS: 335999

New

SLED

14 GA Stranded Wire SupplyThe contract seeks the supply of 14-gauge stranded wire specifically designated for high-current vehicle upfitting applications, indicating a demand for durable and electrically efficient cabling suitable for demanding automotive modifications. The solicitation is structured as a subcontract and was posted on July 31, 2026, with a firm response deadline of August 14, 2026, allowing potential suppliers a two-week window to submit proposals. The North American Industry Classification System code 335999 categorizes this under Other Electrical Equipment and Component Manufacturing, suggesting the requirement aligns with specialized electrical component production rather than general wiring. The contracting agency is identified as Iowa, with no further organizational or geographic details provided, and the place of performance lacks specific city or state information. Interested parties must access the solicitation portal via the provided UI link to review full requirements and submit responses, as no point of contact or set-aside provisions are detailed in the posting.

POSTED

DEADLINE

30A Mini Fuse SupplyThe contract seeks the supply of 30-amp mini fuses designed for use in high-load vehicle electrical circuits, targeting a specialized component critical to ensuring electrical safety and system integrity in demanding automotive applications. The solicitation is structured as a subcontract under NAICS code 335999, indicating it falls within the category of other electrical equipment and component manufacturing, and is open for responses until August 14, 2026, with the posting date set for July 31, 2026. While the issuing agency is listed as Iowa with no specific office address or point of contact provided, the place of performance remains unspecified, and there is no set-aside designation indicated, meaning the opportunity is open to all eligible suppliers without restriction based on business size or ownership type. The sole reference for submission and further details is an online portal linked through the SciQuest platform.

POSTED

DEADLINE

Heat Shrink Spade TerminalsThe contract seeks the supply of heat shrink spade terminals designed for quick-connect electrical applications in vehicle upfitting, targeting specialized automotive modification needs. These terminals are critical components for secure, durable, and insulated electrical connections in commercial and government vehicle fleets, ensuring reliable performance under demanding operational conditions. The solicitation is classified as a subcontract under NAICS code 335999, covering other electrical equipment and component manufacturing, and is open for bids through the Iowa agency’s procurement portal. While no specific set-aside status is indicated, interested suppliers must submit responses by the deadline of August 14, 2026, at 5:00 PM Eastern Time, following the solicitation posted on July 31, 2026. All deliveries and performance are expected to support Iowa’s vehicle upfitting initiatives without a designated place of performance specified in the available data.

POSTED

DEADLINE

Heat Shrink Ring TerminalsThe contract is for the supply of heat shrink ring terminals intended for secure grounding and electrical connections in vehicle upfits, targeting reliable performance in demanding automotive environments. The solicitation is classified as a subcontract under NAICS code 335999, which covers other electrical equipment and component manufacturing, indicating the requirement is for specialized electrical components rather than broad vehicle modifications. The posting date is July 31, 2026, with a response deadline of August 14, 2026, providing a two-week window for potential vendors to submit proposals. The contracting entity is identified as Iowa, with no specific agency or office address detailed, and the place of performance lacks geographic specification, suggesting either flexibility in delivery or that location will be determined post-award. The procurement is accessible through a public bidding portal hosted by SciQuest, with no set-aside provisions or special classifications listed, meaning all eligible suppliers may respond without restriction based on business size or ownership type.

POSTED

DEADLINE

Heat Shrink Butt ConnectorsThe contract pertains to the supply of heat shrink butt connectors designed for insulated wire splicing within vehicle electrical systems, ensuring reliable and durable electrical connections in automotive environments. The solicitation is classified as a subcontract under NAICS code 335999, indicating it falls under other electrical equipment and component manufacturing, and is posted by the Iowa agency with a response deadline of August 14, 2026. The materials must meet technical specifications suitable for automotive applications, including resistance to vibration, moisture, and temperature extremes typical in vehicle systems. The place of performance and point of contact details are not specified, but submissions must be made through the provided online portal by the stated deadline. The contract does not indicate a specific set-aside designation, meaning all eligible suppliers may respond without preferential classification.

POSTED

DEADLINE

Mini Fuse Supply (15A)The contract is for the supply of 15-amp mini blade fuses intended for use in vehicle electrical systems to provide protection against overcurrent and electrical faults. It is classified as a subcontract under NAICS code 335999, which covers other electrical equipment and component manufacturing, indicating the focus is on the production and delivery of these specific fuse components. The solicitation was posted on July 31, 2026, with a mandatory response deadline of August 14, 2026, requiring interested suppliers to submit proposals within this window to be considered. The contract is associated with the Iowa agency, though no specific office address or point of contact is provided, and the place of performance details are unspecified. All bids must be submitted through the designated online portal linked via the provided URL, and there is no set-aside designation indicating this opportunity is open to all eligible vendors regardless of size or status.

POSTED

DEADLINE

Automotive Wire SupplyThe contract involves the supply of 16-gauge black striped wire specifically for vehicle upfitting applications, targeting automotive modifications that require durable and standardized electrical wiring. The solicitation is classified as a subcontract with a NAICS code of 335999, indicating it falls under other electrical equipment and component manufacturing. The posting date is July 31, 2026, and responses must be submitted by August 14, 2026, providing a two-week window for interested parties to prepare and submit their proposals. The Iowa agency is the overseeing entity, though no specific office address or point of contact is provided, and the place of performance lacks detailed location information, suggesting flexibility in delivery or installation sites. The contract is accessible via a public bidding portal linked through the provided URL, and no set-aside provisions or special classifications are in effect, meaning any qualified supplier can respond without restriction based on business size or ownership status.

POSTED

DEADLINE

Solicitation # SPE4A7-26-Q-0944

The contract specifies the procurement of one unit of COVER, TERMINAL BOARD with NSN 5940-01-696-6966 under solicitation SPE4A7-26-Q-0944, issued by the Department of Defense through DLA. It is a Firm Fixed Price contract with no tolerance for quantity variance, requiring delivery within 145 days after order date, with both inspection and acceptance occurring at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and palletization must adhere to specified DLA guidelines. Sampling for quality control follows MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item must be marked per RQ017, and government identification must be removed from non-accepted supplies per RQ011. Shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and delivered to a designated DLA facility at Hill AFB, Utah. The contract's unit of issue and pricing are fixed, with no allowances for adjustment, and all documentation must align with DLA’s authorized systems and formats.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A0-26-T-4013

The contract solicitation SPE4A0-26-T-4013 seeks the delivery of a single unit of an Electrical Panel, identified by NSN 5975-01-519-4819 and part number 100H368G01, to be furnished to the USS SCRANTON SSN 756 at FPO AP 96692, with delivery required within five days of order issuance and a firm delivery date of July 21, 2026. The item is classified as a Type I shelf-life item with a non-extendable 60-month shelf life, and special marking code 32 must be applied in accordance with DLA packaging standards. All packaging and preservation must adhere to MIL-STD-2073-1E using dry preservation methods, with no preservation or wrap materials specified, and all marking must comply with MIL-STD-129 including barcoding for traceability. Mercury and mercury-containing compounds are strictly prohibited in preservation, packaging, and labeling per IP056, with exceptions only for functional components such as batteries, fluorescent lamps, sensors, and certain instruments, which must be shockproof and contain a secondary containment barrier per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot unless otherwise specified, with attribute verification levels set at VII for critical, IV for major, and II for minor characteristics. The delivery is FOB destination, with government inspection and acceptance occurring at the destination point, and invoicing must be submitted electronically through WAWF. Technical and quality requirements are governed by the DLA Master List, referenced through R and I numbers, while DFARS and FAR clauses mandate compliance with hazardous material handling, sustainable procurement, trafficking in persons prohibitions, employment eligibility verification, and cybersecurity safeguards including NIST SP 800-171. The contract requires representation of small business status and socioeconomic certifications, though no specific set-aside is indicated. No pricing data is provided in the solicitation, and award is contingent upon submission via DIBBS by the July 31, 2026 deadline, with contract administration handled by DLA Aviation representative Danita Davis.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE4A5-26-T-307G

The contract solicitation SPE4A5-26-T-307G seeks the supply of two dome light units, NSN 6220016516506, manufactured by Grimes Aerospace Company with part number 10-0359-9, for delivery to Tinker Air Force Base, Oklahoma, under FOB Origin terms with a 169-day delivery timeline. The item is designated as a critical application requiring FAA airworthiness approval and compliance with non-tailored higher-level quality requirements based on ISO 9001:2015. All technical and quality standards referenced, including packaging, marking, and inspection protocols, are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with specific directives for preservation, packaging, and labeling per MIL-STD-2073-1E and MIL-STD-129, including a “Fragile” designation and removal of government identification from non-accepted items. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required in the sample lot unless otherwise specified, with verification levels assigned as VII for critical, IV for major, and II for minor attributes at corresponding AQLs of 0.1, 1.0, and 4.0. Packaging must meet DLA-specific requirements RP001 and RP003, and all supplies are subject to FAA bare item marking rules. The contract mandates compliance with a range of FAR and DFARS clauses including equal opportunity, combating trafficking, employment eligibility, sustainable products, hazardous material identification, cybersecurity (NIST SP 800-171), and limitations on use of cyber incident information. Payment must be submitted electronically through WAWF, and the offeror must hold a valid UEI and CAGE code, with socioeconomic certifications required if representing as a small business or any of its subsets. The solicitation explicitly excludes pricing details, indicating submission of quotes is expected through DIBBS by the August 5, 2026 deadline, with award anticipated to follow based on technical acceptability and compliance, though the evaluation methodology and basis of award are not stated. The delivery is to be made directly to the DLA Distribution Depot in Oklahoma with no variance allowed in quantity, and the item must be traceable through mandated 2D Data Matrix barcoding per MIL-STD-129.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Secondary Service Cable SupplyThe contract is for the supply of secondary aluminum service cables in sizes 1/0 and 2/0 AWG, intended for use in low-voltage electrical distribution systems. This is a subcontract under a Small Business Set Aside, meaning only small businesses are eligible to compete, and the North American Industry Classification System code 335999 applies, indicating it falls under other electrical equipment and component manufacturing. The opportunity was posted on July 31, 2026, with a response deadline of August 10, 2026, at 8:00 PM Eastern Time. The contracting entity is W4LD USA Hecsa, operating under the Department of Defense, though specific location details for the office or place of performance are not provided. The procurement is part of a broader effort to secure essential electrical infrastructure components through support of small business vendors, with all bids required to meet specified technical and compliance standards for the cables.

POSTED

DEADLINE

Grounding and Bonding Kits SupplyThe contract titled Grounding and Bonding Kits Supply is a subcontract under a Small Business Set Aside designation, specifically reserved for small business concerns, and is associated with the NAICS code 335999 for other electrical equipment and component manufacturing. It seeks the procurement of 15kV grounding kits designed to ensure safe de-energization and protect workers in high-voltage environments, critical for maintaining operational safety in defense-related electrical infrastructure. The solicitation was posted on July 31, 2026, with a firm response deadline of August 10, 2026, at 8:00 PM EDT, and is managed by W4LD USA Hecsa under the Department of Defense, though specific performance location and point of contact details are not provided. The kits must meet stringent industry standards for reliability and safety to function effectively during maintenance, repair, or emergency scenarios involving high-voltage systems. As a subcontract, this opportunity is intended to support small business participation in federal supply chains, with no set-aside modifications indicated. All responses must be submitted prior to the deadline to be considered, and potential suppliers are expected to demonstrate capacity to deliver qualified grounding equipment that conforms to required technical specifications for use in DoD high-voltage applications. The official solicitation can be accessed via the provided SAM.gov link for full technical requirements and submission guidelines.

POSTED

DEADLINE

More opportunities from Department Of State → US Embassy Ulaanbaatar

Same awarding agency

NAICS: 488190

Federal

Freight and Delivery Services (DAP to U.S. Embassy Ulaanbaatar)This contract involves arranging and executing international freight logistics to deliver all specified equipment to the U.S. Embassy in Ulaanbaatar, Mongolia. The delivery terms are specified as Delivered at Place (DAP), indicating the contractor is responsible for all transportation costs and risks until the goods reach the designated location at the embassy. The contract is classified under the NAICS code 488190, which relates to other support activities for transportation, indicating a focus on freight forwarding and logistics services. Issued by the U.S. Embassy in Ulaanbaatar, under the Department of State, this subcontract aims to ensure timely, secure, and compliant delivery of equipment internationally. The place of performance is Ulaanbaatar, Mongolia, with no specified set-aside designation, and no solicitation number provided. This arrangement emphasizes the contractor's role in coordinating international shipping logistics to meet diplomatic mission requirements efficiently.

Other Support Activities for Air Transportation

POSTED

DEADLINE

Supply of Starlink Mini Protective CoversThe contract involves the supply of 70 protective covers specifically designed for Starlink Mini Terminals to safeguard them from weather conditions, dust, and physical damage during transport and usage. This procurement is a subcontract awarded by the U.S. Embassy in Ulaanbaatar under the Department of State. The covers are intended to enhance the durability and longevity of the Starlink Mini Terminals by providing robust protection in various environmental conditions. The contract was posted on April 20, 2026, classified under the NAICS code 326299, which corresponds to manufacturing related to plastics product manufacturing—indicating the protective covers are likely made from specialized materials suited for protective purposes. Performance of the contract is set in Ulaanbaatar, Mongolia, reflecting the location where the terminal covers will be utilized. The solicitation does not specify any type of set-aside, and further details such as a point of contact are not provided.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Supply of 12V Cigarette Lighter Adapters (10ft, Braided)The contract involves the supply of 70 units of 12V power adapters equipped with 10-foot braided cables intended for use with Starlink Mini Terminals, facilitating vehicle-based power connections. The adapters are designed to plug into a vehicle's cigarette lighter socket, ensuring reliable power delivery in mobile environments. This subcontract was issued by the U.S. Department of State through the U.S. Embassy in Ulaanbaatar, Mongolia, with a focus on providing necessary power accessories to support operational equipment in that region. The contract falls under the NAICS code 335931, which pertains to battery manufacturing, indicating an emphasis on electrical components. The solicitation does not specify set-aside status, and performance is centered in Ulaanbaatar.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Supply of Starlink Mini Magnetic MountsThe contract involves the supply of 70 magnetic mounts designed specifically to be compatible with the Starlink Mini Terminal, facilitating secure outdoor installation. This subcontract was posted on April 20, 2026, and falls under the NAICS code 332999, indicating it is related to miscellaneous fabricated metal product manufacturing. The contracting agency is the US Embassy in Ulaanbaatar, operating under the Department of State. The place of performance is Ulaanbaatar, Mongolia, though further location details are not specified. The contract does not specify any set-aside type, nor does it list a particular organization type or point of contact. The primary purpose is to provide reliable mounting solutions ensuring effective and secure deployment of Starlink Mini Terminals in an outdoor environment for governmental use.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Starlink Mini TerminalsThe contract involves the procurement and delivery of 70 units of Starlink Mini Terminals, which must be new, unused, and fully operational upon arrival. This subcontract, issued by the US Embassy in Ulaanbaatar under the Department of State, aims to equip the specified location with reliable communication terminals. The place of performance is Ulaanbaatar, Mongolia, and the work falls under NAICS code 334220, which pertains to communications equipment manufacturing. This opportunity was posted on April 20, 2026, and does not specify any set-aside type or preferences. While detailed contact information and solicitation numbers are not provided, further details and the full solicitation can be accessed through the official federal contracting portal. The contract emphasizes ensuring that the equipment meets quality standards and functionality expectations upon delivery.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Import/Export CoordinationThis contract involves the coordination of export and import documentation for air filters sourced internationally, specifically to support the procurement tracking activities of the U.S. Embassy in Ulaanbaatar. The primary focus is to ensure smooth processing of necessary paperwork related to the international shipment of these air filters, facilitating compliance with relevant customs and transportation regulations. The contract is a subcontract under NAICS code 488510, which covers customs brokerage and freight forwarding services. The place of performance is Ulaanbaatar, Mongolia, with the contracting agency being the U.S. Embassy Ulaanbaatar, part of the Department of State. The contract was posted on February 13, 2026, and aims to provide logistical support that streamlines procurement operations tied to internationally sourced goods. No specific solicitation number, set-aside type, or point of contact is provided. This ensures that all necessary documentation for imports and exports is properly managed to assist the embassy in its operational objectives related to air filter procurement.

Freight Transportation Arrangement

POSTED

DEADLINE

Domestic Freight and Delivery Logistics to Kent, WAThe contract involves the transportation and delivery of 360 air filter units from the supplier's location to a destination in Kent, Washington, under F.O.B. Destination terms, ensuring the supplier is responsible for the goods until they reach the specified delivery point. This subcontract, titled "Domestic Freight and Delivery Logistics to Kent, WA," was posted on February 13, 2026, and is related to the NAICS code 484220, which pertains to general freight trucking services. The contract is issued by the US Embassy in Ulaanbaatar, under the Department of State, with the place of performance listed as Ulaanbaatar, Mongolia, with the ZIP code 14095. Although detailed contact information and solicitation number are not provided, the arrangement indicates coordination between the embassy and the transportation supplier to facilitate the secure and timely delivery of the specified goods. The subcontract aims to ensure reliable domestic freight logistics for the embassy’s operational needs.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of 400 Series Dual Protection Air Filters (Blueair F400DPF)The contract entails the procurement and delivery of 360 units of Blueair F400DPF 400 Series Dual Protection air filters, specifically designated for a USDA facility located in Kent, Washington. This subcontract, posted on February 13, 2026, involves supplying advanced air filtration units designed to ensure high-quality air purification. The specified product, the Blueair F400DPF, is part of the 400 Series known for its dual protection technology, which likely addresses both particulate and gaseous contaminants. Administered by the U.S. Embassy in Ulaanbaatar under the Department of State, the contract is categorized under NAICS code 335228, which relates to the manufacturing of other major household appliances. While the place of performance is to be at the USDA facility in Kent, WA, procurement coordination or oversight appears linked to the office in Ulaanbaatar, Mongolia. This arrangement highlights an international contractual relationship for supplying critical air filtration equipment to a U.S. government facility.

Other Major Household Appliance Manufacturing

POSTED

6 months ago

DEADLINE

N/A

View Details