This Government Contract opportunity from Department Of Defense was posted on July 11, 2011. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

42--A-M7H FireHawk M7 Air Mask

Awarded

0010052390Federal

Submission Closed07/11/2011, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 313210

New

DIBBS

Lacing and Tying Tape SupplierThis subcontract opportunity is for the manufacture or sourcing of 108,000 units of lacing and tying tape to support prime contractors delivering on Department of Defense supply contracts. All materials must strictly adhere to NSN 016571095/4020 specifications. The selected supplier is responsible for ensuring that all items are packaged according to ASTM D3951, marked and labeled per MIL-STD-129, and palletized in accordance with RP001 DLA Packaging Requirements. The contract is managed by Construction & Equipment Manu & Con for performance in San Diego, California. Interested parties must be registered in both SAM and WAWF to be eligible. Responses to this solicitation are due by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Specialized Fastener and Tether SupplyThis subcontract, titled Specialized Fastener and Tether Supply, is a Service-Disabled Veteran-Owned Small Business set-aside issued by the Department of Defense under the agency Construction & Equipment MRO SVC I. The contract focuses on the provision of specialized attachment hardware for prime contractors fulfilling DLA supply contracts, specifically requiring 50-inch Type I or Type IA white tether cords and precut loop-side Velcro backing. All materials must adhere to the technical specifications for NSN 6230-01-686-4184 and be delivered in bulk shipments to the manufacturer. The opportunity is categorized under NAICS code 313210 and is designated for performance in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Berry Amendment Compliant Fiber Rope SupplyThis subcontract opportunity involves the supply of raw fiber rope materials to prime contractors supporting DLA Troop Support contracts. The required materials must be high-strength fiber rope that strictly adheres to the diameter and strength specifications outlined for NSN 4020-01-665-0063. Performance for this contract will take place in Jacksonville, Florida. A critical requirement for this procurement is the provision of certification regarding domestic origin to ensure full compliance with the Berry Amendment and Buy American regulations. Interested parties must submit their responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 313210.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supplier of Woven Cotton/Elastic Medical FabricThis subcontract involves the supply of raw woven cotton and elastic fabric to prime contractors supporting the Department of Defense Medical Supply Chain. The selected supplier is responsible for weaving latex-free, flesh-colored fabric that adheres to strict tension and durability standards for use in pressure bandages, supports, and binders. All materials must be delivered in rolls to the manufacturer and must strictly comply with the Berry Amendment, ensuring that all textile sourcing is of U.S. origin. The project is managed under the Medical Supply Chain MD Surg FSF agency with performance taking place at Fort Leonard Wood. Interested parties must adhere to the procurement timeline, with the response deadline set for November 3, 2026. The contract falls under NAICS code 313210, focusing on the specialized production of medical-grade textile materials.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Military-Grade Nylon Fabric SupplyThis subcontract for the Department of Defense C and T Supply Chain involves the provision of specialized, shade-matched textured nylon duck fabrics for prime contractors. The scope of work includes the delivery of 1000D Type I, 500D Type III, and Tan 499 fabrics, all of which must be delivered as certified rolls accompanied by detailed test reports. To ensure quality and consistency, the supplier must adhere to MIL-DTL-32439 and MIL-DTL-43128 standards and execute 100% shade sampling procedures in accordance with the AQAR. The opportunity is categorized under NAICS code 313210, with a response deadline set for December 14, 2026.

POSTED

DEADLINE

High-Strength Technical Thread SupplyThis subcontract involves the manufacture and supply of high-strength specialized technical thread for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contractor is required to deliver certified spools of thread that strictly adhere to specification V-T-295, Type I or II, Class A, Size E. To ensure full compliance with military standards, each delivery must be accompanied by a certification of compliance and detailed material test reports. The opportunity is categorized under NAICS code 313210 and was posted on October 28, 2026, with a response deadline of November 26, 2026. Performance for this contract is centered in the 31098-1887 zip code area. Interested parties can find further details through the DIBBS portal under solicitation reference SPE4A726Q0658.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Parachute-Grade Webbing and Hardware SupplyThis subcontract involves the supply of high-strength webbing, buckles, D-rings, and fasteners to prime contractors supporting DLA supply contracts. The required materials include high-tenacity nylon or polyester webbing and military-specification hardware that must adhere to TDP Rev C Gen 3 strength and durability standards. All deliveries must include Certificates of Conformance to ensure compliance with Critical Application safety standards. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract requires strict adherence to ITAR and EAR compliance due to the materials' use in military parachute applications. The performance location is based in zip code 73145-8000, with a response deadline set for November 25, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Fibrous Cord (NSN 4020002336556)This subcontract involves the manufacture or procurement of 46,000 units of fibrous cord, specifically matching NSN 4020002336556, to support prime contractors on DLA Troop Support projects. The Department of Defense requires that all materials be packaged according to DLA Packaging Requirements RP001 and that the provider maintains strict compliance with RD003 Covered Defense Information standards. The contract stipulates a delivery timeline of 167 days after the order is placed, with performance taking place in Tracy, California. This procurement falls under NAICS code 313210 and is managed through the Construction and Equipment Manufacturing and Construction agency.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

DRY CHEMICAL, FIRE EXTI

Solicitation # SPE8E6-27-T-0425

Solicitation SPE8E6-27-T-0425 is a Request for Quotations issued by DLA Troop Support Construction and Equipment for the procurement of 20 dry chemical fire extinguishers, identified by NSN 4210016256364. The requirement specifies a delivery timeframe of 16 days after order, with a need ship date of November 26, 2026, and an original required delivery date of January 26, 2027. Delivery is FOB Origin, with the destination and inspection point located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 for labeling and RP001 for palletization. If the materials are deemed hazardous per FED-STD-313, they must be packaged according to TQ requirement IP025 and labeled per the Hazard Communication Standard. Technical and quality requirements from the DLA Master List take precedence over ASTM D3951. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment. Quotations are due by November 9, 2026, and must be submitted via the DIBBS portal.

POSTED

DEADLINE

Solicitation # SPE8EN-27-T-0248

Solicitation SPE8EN-27-T-0248 is a Request for Quotations issued by DLA Troop Support, Construction and Equipment T and IFO EQ, for the procurement of 72 Public Address Sets (NSN 5830-01-594-9992). The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of March 30, 2027, and a need ship date of April 26, 2027. The delivery terms are FOB Origin, and the delivery period is specified as 167 days after order. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and quality standards, including ASTM D3951, MIL-STD-129 for marking and labeling, and RP001 for palletization. Specific technical requirements include the removal of government identification from non-accepted supplies (RQ011) and strict mercury containment protocols per NAVSEA 5100-003D. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 cybersecurity assessment requirements, and prohibitions on covered defense telecommunications equipment. Quotations are due by November 9, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

PROTECTIVE COVER, AIRCR

Solicitation # SPE8E6-27-T-0420

Solicitation SPE8E6-27-T-0420 is a fixed-price federal acquisition for 17 units of aircraft fuel nozzle protective covers, identified by NSN 4210015075525 and part number 901-266-001-101. This critical application item is associated with the Bell-Boeing Team Joint Project and is to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is June 4, 2027, with a need ship date of April 26, 2027, and a delivery window of 167 days after order. Shipping terms are FOB Origin, and both inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 self-assessment and the protection of covered defense information. Packaging must comply with MIL-STD-129 for marking and labeling, and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials require packaging per TQ requirement IP025 and FED-STD-313. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment. Award evaluation may include a HUBZone price preference, and all quotes must be submitted via the DIBBS portal.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Molded Fabric Sheet (Brand Name Mandatory)

Solicitation # SPMYM327Q1103

Solicitation SPMYM327Q1103 is a combined synopsis and solicitation issued by DLA Maritime Portsmouth for the procurement of three molded-fabric reinforced phenolic flat sheets. The requirement is brand name mandatory to Scan Pac Manufacturing, specifically for part number GFPMF-358416650-118 with dimensions of 28 in x 30 in x 2 in thick. This is a 100 percent Small Business Set Aside under NAICS code 313210. The award will be based on the Lowest Price Technically Acceptable (LPTA) criteria, though the government may prioritize the soonest delivery if the required delivery date of December 3, 2026, cannot be met. Qualified offerors must be registered and active in the System for Award Management and submit their quotes via email by November 4, 2026, at 3:00 PM EST. Submissions must include descriptive literature to verify technical specifications and a completed representation regarding covered defense telecommunications equipment. Access to the associated technical drawing requires a signed Security Agreement and DD Form 2345. Payment will be processed via Government Purchase Card with Net 30 terms, and delivery is required FOB Destination to Kittery, Maine. Evaluation will also include a review of vendor responsibility through the Supplier Performance Risk System and a requirement for a CMMC Level 2 Self-Assessment.

DLA Maritime - Portsmouth

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

The U.S. Army ACC MICC Fort Benning is soliciting bids for ten new A-M7H Firehawk M7 Air Masks, specifically configured with a double pull carrier, MSA Stealth H60 low profile 4500 PSI 60 minute cylinder, and a medium Ultra Elite facepiece. This procurement is a small business set-aside under NAICS code 313210, requiring brand name or equal equipment that meets 2007 NFPA compliance. Only new equipment is acceptable; remanufactured, used, or grey market items are strictly prohibited. Bids must be submitted electronically via FedBid.com, as the agency intends to utilize an online competitive reverse auction to determine the award. The delivery terms are FOB Destination to Fort Benning, Georgia. To be eligible for award, contractors must be registered in the Central Contractor Registration system and utilize the Wide Area Workflow for electronic payment requests and receiving reports. All bids must remain valid for 30 calendar days following submission.

General Info

Agency

Department Of Defense → W6QM Micc-Ft Benning

Contract Value

$50,470

NAICS

313210 - Broadwoven Fabric Mills

Place of Performance

GA, USA

Set-Aside

NONE

Awardee

ATLANTIC DIVING SUPPLY, INC.

Award Issued Date

07/06/2011, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedMay 31

Combined Synopsis

AwardedJul 6

Contract was awarded

Submission Closed

07/11/2011, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QM Micc-Ft Benning

ContactsNo contacts available

OfficeFORT BENNING, GA, 31905-5182, USA

Organization / AgencyDepartment Of Defense → W6QM Micc-Ft Benning

Office AddressFORT BENNING, GA, 31905-5182, USA

ContactsNo contact information available

Full Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is 0010052390 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-51. The associated North American Industrial Classification System (NAICS) code for this procurement is 313210 with a small business size standard of 1,000.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2011-06-03 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Benning, GA 31905 The U.S. Army ACC MICC Fort Benning requires the following items, Brand Name or Equal, to the following: LI 001, A-M7H Firehawk M7 Air Mask, 4500 psig, Configured A-M7HD14C0C14AA0With the following configuration:CARRIER: DOUBLE PULL W/CHEST STRAPCYLINDER: MSA STEALTH H60 LOW PROFILE 4500 PSI 60 MINUTE CYLINDERREGULATOR TYPE: CBRN, SOLID.COV. PTC. THRD'DEMERGENCY BREATHING SUPPORT: NONEFACEPIECE TYPE: UE HYCAR MEDIUM HEADSUP DISPLAYNOSECUP: ULTRA ELITE-MEDIUMHEAD HARNESS: SPEED ON W/NECKSTRAPCOMMUNICATIONS: NONEGAUGE/INTEGRATED PASS OPTION: CONTROL MD. W/THERMISTORMust meet the requirements of the 2007 NFPA COMPLIANT, 10, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, U.S. Army ACC MICC Fort Benning intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Army ACC MICC Fort Benning is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (+1 (555) 000-0000) or via email at contact@example.gov. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (+1 (555) 000-0000) or contact@example.gov. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2005); 252.246-70000 Material Inspection and receiving Report and Army Electronic Invoicing Instructions CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. Sellers must present their representations and certifications, upon request, through the Online Representations and Certifications Application (ORCA) at http:orca.bpn.gov. New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be good for 30 calendar days after submission FOB Destination CONUS (CONtinental U.S.) No partial shipments unless otherwise specified at time of order In accordance with DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under about WAWF. Contractors may contact the WAWF Customer Support for assistance toll free at +1 (555) 000-0000; commercial: +1 (555) 000-0000; Fax commercial: +1 (555) 000-0000 or contact@example.gov