Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

43--PUMP,HYDRAULIC

Awarded

SPE7M426T6528Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract award is for a hydraulic pump identified by the title 43--PUMP,HYDRAULIC under solicitation number SPE7M426T6528, issued by the DLA Land and Maritime, a branch of the Department of Defense. The procurement is classified under NAICS code 333996, which pertains to other engine equipment manufacturing, and the award notice was posted on May 12, 2026. The contracting office is located in Columbus, Ohio, with a zip code of 43218-3990. No specific place of performance has been indicated, and no set-aside designation is listed, indicating the award is open to all eligible bidders. Primary point of contact for inquiries is Blake Tushar, reachable via email at [email hidden] or by phone at [phone hidden]. The contract details can be viewed online through the SAM.gov workspace portal.

General Info

Hydraulic pump contract awarded by DLA Land and Maritime to unspecified vendor under SPE7M4326528.

Agency

Department Of Defense → DLA Land And Maritime

Contract Value

$0

NAICS

333996 - Fluid Power Pump and Motor Manufacturing

Place of Performance

OH, USA

Set-Aside

NONE

Awardee

Award Issued Date

05/12/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedFeb 10

Combined Synopsis

AwardedMay 12

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / AgencyDepartment Of Defense → DLA Land And Maritime

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Blake Tushar

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Proposed procurement for NSN 4320014787539 PUMP,HYDRAULIC: Line 0001 Qty 110 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0012 DAYS ADO Approved source is 75906 581912-003. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

Axial Piston Pump Supplier (NSN 4320015236824)This subcontract involves the supply of two axial piston pumps for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The pumps must strictly adhere to NSN 4320015236824 specifications, with a specific prohibition against the use of additive manufacturing. The supplier is required to comply with the Buy American Act and the DLA Master List of Technical and Quality Requirements, ensuring all items are packaged according to MIL-STD-2073-1E and MIL-STD-129 standards for delivery to DLA Distribution San Joaquin in Tracy. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333996. Interested parties must submit their responses by November 9, 2026, to meet the requirements of the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-T-1005

Solicitation SPE7M1-27-T-1005, issued by the DLA Weapons Support Maritime Supply Chain, is a fixed-price procurement for 13 units of a spring-loaded shaft seal assembly, identified by NSN 4320014390131. This is a restricted source, critical application item requiring engineering source approval from the government design control activity, specifically referencing Shapes Group Ltd Co. part number 5750008-003. The required delivery date is October 17, 2027, with a need ship date of April 13, 2027, and a delivery lead time of 168 days. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Diego. The contract mandates strict adherence to technical and quality requirements via the DLA Master List (RA001) and specific environmental restrictions, including the prohibition of intentionally added mercury and Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information. Quotations must be submitted through the DIBBS portal, and the government will not evaluate items produced via additive manufacturing unless specifically authorized.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

SLEEVE, SHAFT, PUMP

Solicitation # SPE7M1-27-U-0956

Solicitation SPE7M1-27-U-0956 is an Indefinite Delivery Contract issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 38 pump shaft sleeves, identified by NSN 4320-01-400-3351. The requirement specifies adherence to Navy Drawing 803-6962399, with specific material and dimensional requirements detailed across sheets 4, 4.1, and 16. Delivery is required within 120 days after receipt of the order, with offers submitted based on FOB Origin under the First Destination Transportation program. Inspection and acceptance are both conducted at the origin. The contract mandates strict compliance with several technical and security standards, including CMMC Level 2 certification and NIST SP 800-171 assessment requirements. Technical and quality standards are governed by the DLA Master List, while packaging must follow ASTM D3951 and marking must comply with MIL-STD-129. Due to the nature of the technical data, export controls under ITAR or EAR apply, requiring approved US/Canada Joint Certification Program certification for access. This is not a small business set-aside, and award evaluation will be based on the price quoted for the estimated annual demand.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

HOUSING, LIQUID PUMP

Solicitation # SPE7M0-27-T-0732

Solicitation SPE7M0-27-T-0732 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for one unit of a liquid pump housing, identified by NSN 4320005099378. The item is associated with Champ Industries, Inc. part number ES1432 and engineering model ES1436. Delivery is required within five days of order, with an original required delivery date of October 26, 2026. The shipment is designated as FOB Origin and is to be delivered to Tyndall AFB in Florida. Inspection and acceptance will both occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. Palletization must follow RP001 guidelines. Payment and invoicing are to be processed electronically via Wide Area WorkFlow. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Evaluation for award may include a price preference for HUBZone concerns.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

PLATE, PRESSURE, ROTARY

Solicitation # SPE7M1-27-U-0815

Solicitation SPE7M1-27-U-0815 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 21 pressure plates for rotary pumps, identified by NSN 4320015734732 and part number 061481-104. This is a total small business set-aside that may result in a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000.00 dollars. The items are designated as critical application items and must be delivered within 130 days after the order is placed, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 Self-Assessment and the DLA Master List of Technical and Quality Requirements. Environmental restrictions prohibit the intentional addition of mercury and the use of Class I ozone-depleting chemicals. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Award will be based on the price quoted for the estimated annual demand.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

COVER, HYDRAULIC, PUMP-M

Solicitation # SPE7M1-27-U-0816

Solicitation SPE7M1-27-U-0816 is a total small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of hydraulic pump-motor covers, identified by NSN 4320015811642 and part number 7250019-019. This request may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 USD for a one-year period. The estimated annual quantity is 72 units, with a required delivery timeframe of 57 days after order. Delivery is FOB Origin, while inspection and acceptance are conducted at the destination per FAR 52.246-1. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and specifies that mercury must not be intentionally added to the hardware. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system. Additionally, the contractor must comply with various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

PUMP, RECIPROCATING

Solicitation # SPE7M1-27-T-0898

Solicitation SPE7M1-27-T-0898, issued by the DLA Weapons Support Maritime Supply Chain, is a set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) for the procurement of 17 reciprocating pumps, which must include the filter. The requirement is identified by NSN 4320-01-277-4631 and includes the provision of one manufacturer's commercial manual covering operation, services, maintenance, and repair. Delivery is required within 46 days after receipt of order, with shipping terms established as FOB Origin and the final destination for inspection and acceptance located in Tracy, California. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, while ensuring palletization complies with DLA requirement RP001. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, and the use of additive manufacturing is prohibited. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. Compliance with the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and hazardous material labeling regulations is mandatory for the successful offeror.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

PUMP-PLATE ASSEMBLY

Solicitation # SPE7M1-27-U-0817

Solicitation SPE7M1-27-U-0817 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of Pump-Plate Assemblies, identified by NSN 4320015742411. This is a total small business set-aside for a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars. The government is seeking an estimated annual quantity of 48 units, with a delivery requirement of 165 days after the order is placed. Terms are specified as FOB Origin, and the contract is issued under the First Destination Transportation program. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. Additionally, the contract prohibits the use of Class I ozone depleting chemicals and requires compliance with the Hazard Communication Standard for any hazardous materials. Inspection and acceptance will occur at the destination. Payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

CYLINDER BLOCK UNIT, HY

Solicitation # SPE7M1-27-U-0806

Solicitation SPE7M1-27-U-0806 is a total small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of Cylinder Block Units for hydraulic motor-pumps, identified by NSN 4320015656163 and part number 1FX292. This request may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars for a one year period. The estimated annual quantity is 22 units, with a guaranteed contract minimum of 3 units and a minimum delivery order quantity of 5 units. Delivery is required within 34 days after receipt of order, with FOB and inspection/acceptance points set at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring palletization complies with RP001. All DLA Master List of Technical and Quality Requirements take precedence over general packaging standards. Invoicing and payment must be processed electronically through Wide Area WorkFlow. Award evaluation is based on the price quoted for the estimated annual demand, and the buy may be eligible for automated award provided the offeror does not quote used or remanufactured items and maintains a quote validity period of at least 90 days. Compliance with the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity requirements is mandatory.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

PARTS KIT, HYDRAULIC PU

Solicitation # SPE7M1-27-T-1654

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

PUMP, AXIAL PISTONS

Solicitation # SPE7M1-27-T-1693

This procurement is a request for quotation issued by the Defense Logistics Agency Weapons Support Maritime Supply Chain for the acquisition of two axial piston pumps, identified by NSN 4320015236824. The delivery is required within 257 days after order, with a specified need ship date of July 25, 2027. Shipping is FOB Origin, with the destination for both inspection and acceptance located at DLA Distribution San Joaquin in Tracy, California. This solicitation is not a small business set-aside and explicitly prohibits the use of additive manufacturing for the produced items. The contract incorporates strict technical and quality requirements, including adherence to the DLA Master List and specific packaging standards under MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions are in place prohibiting the use of Class I ozone-depleting chemicals. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various Federal Acquisition Regulations, such as the Buy American Act and DFARS cybersecurity reporting standards. Offerors must submit quotes via DIBBS and provide necessary representations regarding their socioeconomic status and the origin of materials used.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-U-0804

Solicitation SPE7M1-27-U-0804 is a Total Small Business Set-Aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of spring-loaded shaft seal assemblies, identified as NSN 4320012760822. This critical application item is being sought as a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and an estimated annual quantity of 44 units. Approved part numbers include Technetics Group Chicago LLC P/N LO-8502 Rev D and Dover Pumps and Process Solutions Segment P/N 331488. The delivery timeline is 90 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The award is based on the price quoted for the estimated annual demand and may be eligible for automated award. Compliance with various FAR and DFARS clauses is required, including those regarding the Buy American Act, cybersecurity safeguarding of covered defense information, and combating trafficking in persons.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

INSULATING COMPOUND,ELECTRICAL

Solicitation # CM26161009

This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 1 month

HEADSET-MICROPHONE : NSN 5965-01-204-8505

Solicitation # SPE7MX26RX089

This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7MX26RX102

DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.

Hardware Manufacturing

POSTED

DEADLINE

in about 1 month

Supplier for Component NSN 015715718This subcontract through DLA Land and Maritime requires the manufacture or distribution of 603 units of hardware component NSN 015715718. The supplier must ensure all components meet strict government specifications, including the application of MIL-STD-129 markings and the use of standard commercial packaging. Additionally, the provider is required to submit proof of commerciality in accordance with FAR Part 12. The completed materials are to be delivered to prime contractors located in Columbus, Ohio. This opportunity falls under NAICS code 332999 and is managed by the Department of Defense. Interested parties must adhere to the specified response deadline of October 29, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 16 hours

Supplier for Component NSN 016603400This subcontract with DLA Land and Maritime requires the manufacture or distribution of 1,169 units of hardware component NSN 016603400. The supplier must ensure all components comply with government specifications and are delivered to Columbus, Ohio. The contractor is responsible for applying MIL-STD-129 markings and utilizing standard commercial packaging. Additionally, the supplier must provide proof of commerciality in accordance with FAR Part 12. This requirement falls under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 16 hours

Oshkosh Wholistic Sole Source Project

Solicitation # 75Q65

DLA Land and Maritime, specifically the Strategic Acquisitions office, is conducting market research for a potential Indefinite Delivery Indefinite Quantity (IDIQ) long term contract under solicitation 75Q65. The project focuses on the procurement of components and support for the Oshkosh MRAP-All Terrain Vehicle (M-ATV), including SOCOM variants and Mine Resistant Vehicles. Required items encompass a wide range of vehicular components, such as structural body parts, mechanical and electrical systems like wiring harnesses and fluid filters, and various specialized hardware and mounting brackets. While Oshkosh Defense is currently the only approved source, the agency is seeking additional manufacturers capable of producing these items. The procurement will be evaluated and awarded on a per NSN/CLIN basis, with specific requirements for standard commercial packaging and MIL-STD-129 markings. Interested parties must submit a Market Research Questionnaire by October 28, 2026, providing details on their business size, manufacturer status, and distribution networks. The performance location is listed as Columbus, Ohio, and the effort falls under NAICS code 332999. Estimated buy quantities have been identified for various components, though a total contract value has not yet been established.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 16 hours

Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.

POSTED

DEADLINE

MULTI NSN DIESEL ENGINE

Solicitation # CM26259595

DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

VALVE, REGULATING, FL

Solicitation # CM26163006

DLA Weapons Support is conducting a sources sought action under project number CM26163006 to identify potential manufacturers for a regulating fluid valve, identified by NSN 4810010865757. The agency is seeking to establish a long-term contract with an estimated annual quantity of 301 units. This opportunity falls under NAICS code 332912 for Fluid Power Valves and Hose Fittings manufacturing, with a small business size standard of 1,000 employees. Because the agency does not possess the drawings or specifications for these items, interested parties must submit the required documentation per DLAD 52.217-9002 to become approved sources. Prospective bidders are required to complete a market survey and spreadsheet, providing manufacturer locations and points of contact. All responses must be submitted to Kristina Blanton by October 29, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

43--CYLINDER SLEEVE

Solicitation # SPE7M126T011N

DLA Land And Maritime

POSTED

DEADLINE

43--PUMP,CENTRIFUGAL

Solicitation # SPE7M126T5913

DLA Land And Maritime

POSTED

DEADLINE

43--SEAL ASSEMBLY,SHAFT

Solicitation # SPE7M126Q0344

DLA Land And Maritime

POSTED

DEADLINE

Rotary Pump Manufacturing and Assembly

DLA Land Warren

POSTED

CLOSED

43--RING,LANTERN

Solicitation # SPE7M426T096K

DLA Land And Maritime

POSTED

CLOSED

43--RING,LANTERN

Solicitation # SPE7M426T096M

DLA Land And Maritime

POSTED

CLOSED

43--PUMP,SLIDING SHOE

Solicitation # SPE7M126Q0669

DLA Land And Maritime

POSTED

DEADLINE

Precision Machining of Centrifugal Pump Impellers

MARITIME SUPPLY CHAIN

POSTED

CLOSED

IMPELLER, PUMP, CENTR

Solicitation # SPE7M1-26-T-013L

MARITIME SUPPLY CHAIN

POSTED

CLOSED

Pumping Unit, Hydraulic, Hand Driven

Solicitation # CM26119002

DLA Land And Maritime

POSTED

CLOSED

PUMP,CENTRIFUGAL

Solicitation # N0010426QLB71

Navsup Weapon Systems Support Mech

POSTED

CLOSED

43--RING,WEARING

Solicitation # SPE7M126T045L

DLA Land And Maritime

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS