Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

48--STATION,REDUCING

Active
N0010426QNE50Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This presolicitation notice, identified by solicitation number N0010426QNE50, is for the procurement of one unit of a 48-station reducing part under NSN 3H-4820-015714038-C1. The item is to be delivered to the Portsmouth Naval Shipyard in Kittery, Maine. The government intends to solicit and negotiate with a single source under FAR 6.302-1 because it does not own the necessary technical data rights and has determined that purchasing such data or reverse engineering the part is uneconomical. Interested parties may submit proposals, quotations, or capability statements within 45 days of publication, though the government maintains sole discretion on whether to conduct a competitive procurement. The acquisition is not being handled under FAR Part 12 for commercial items, but vendors may notify the contracting officer within 15 days if a commercial item can satisfy the requirement. The contract is subject to the Buy American Act and various Free Trade Agreements.

General Info

Single source procurement of one 48-station reducing part for Portsmouth Naval Shipyard.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA

Full Description

Show more
NSN 3H-4820-015714038-C1, TDP VER 001, QTY 1 AY, DELIVER TO N50286, PORTSMOUTH NAVAL SHIPYARD L1SS, KITTERY, ME 03904. The Government does not own the data or the rights to the data needed to purchase / contract repair of this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists (QPLs), Qualified Product Databases (QPDs), Military Handbooks, and other standardized documents from the DoD Single Stock Point (DODSSP) at Document Automation and Production Service (DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://quicksearch.dla.mil/. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSIST Help Desk at 215-697-2667 or 215-697-2179(DSN: 442-2667), or mail their requestDLA Document Services, Bldg. 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. All responsible sources may identify their interest and capability to respond to the requirement or submit proposals, quotations or capability statements. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days (30 days if award is issued under an existing Basic Ordering Agreement (BOA) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. One or more of the items under this acquisition is subject to: Free Trade Agreements, if DFARS clause 252.225-7036 Buy American Act--Free Trade Agreements--Balance of Payments Program, is included in the solicitation. The World Trade Organization Government Procurement Agreement and Free Trade Agreements, if DFARS clause 252.225-7021 Trade Agreements, is included in the solicitation.

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
Federal
LLA CHECK VALVES
Solicitation # W912EF26QA083
The U.S. Army Engineer District Walla Walla is soliciting firm-fixed-price quotes for two new 18-inch Carbon Steel Globe Body Silent Check Valves to be delivered to Lower Granite Dam, under solicitation number W912EF26QA083. This is a total small business set-aside with a NAICS code of 332911, and only new equipment is acceptable—remanufactured, refurbished, or gray market items are prohibited. The valves must be engineered to prevent flow reversal, surge, and water hammer while meeting all applicable ASTM standards, including a cast carbon steel body (ASTM A216 Grade WCB), 316 stainless steel trim and disc (ASTM A351 Grade CF8M), a 302 stainless steel spring (ASTM A276), and stainless steel guide pins and bushings. Operational specifications require a minimum pressure and temperature rating of 285 PSI at 100°F, ANSI Class 150 integrally cast flanged ends with a 16-hole bolt pattern, a flow capacity of at least 110% of the pipe size, a cracking pressure of less than 1 PSI, and top-and-bottom guided disc alignment to accommodate multi-angle installations. The valves must also include a metal-to-metal hand-lapped drop-tight seal and a permanently affixed, corrosion-resistant stainless steel nameplate listing the manufacturer, model, size, rating, and manufacturing date. Physical dimensions are strictly defined with no tolerance allowed: face-to-face measurement must be exactly 22.5 inches, overall diameter must not exceed 31 inches, and total weight must not exceed 1,300 lbs. Flanges must conform to ASTM A105 and ASME B16.5 standards with a 25-inch outside diameter, 22.75-inch bolt circle diameter, and 16-hole configuration. Quotes must be submitted by the deadline of August 14, 2026, and deliveries are to be made to a location in Washington with a zip code of 99347. Primary point of contact is Gregory Moyer, reachable via email at Gregory.Moyer@usace.army.mil or phone at 509-527-7207, with Kristin Hyde as the secondary contact. The solicitation was posted on July 27, 2026, and
US Army Engineer District Walla Wal

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 333998
New
Federal
36--CANISTER
Solicitation # N0010426QFG27
This contract pertains to the procurement of a specialized CANISTER designed for use in a critical shipboard system, where any failure could result in catastrophic consequences including loss of life, ship damage, or system failure. The item is classified as SPECIAL EMPHASIS MATERIAL (Level I) and is subject to stringent quality control, traceability, and inspection protocols under the Deep Submergence Systems Program. The contractor must comply with ISO-9001 or equivalent quality systems, maintain traceability from raw material to finished product using MIL-STD-792-compliant markings, and ensure 100% inspection of all Objective Quality Evidence and certification documents. All materials must conform to NAVSEA SS521-AM-MMA-010 Chapter 7, Navy part number 3.80.1018-3, and meet strict toxicity and flammability standards per NAVSEA SS800-AG-MAN-010/P-9290. Mercury and mercury-containing compounds are prohibited, and configuration control is strictly enforced through Engineering Change Proposals for any modifications affecting form, fit, function, or interface. The contract mandates zero-defect acceptance criteria for lot inspections, with sampling governed by ANSI/ASQ Z1.4 or full lot inspection for small batches. All compliance documentation, including Certificates of Compliance, must be submitted electronically via Wide Area Work Flow prior to delivery and must contain precise traceability to individual units, NSNs, and material certifications with no disclaimers or ambiguities. Certification data must be reviewed and accepted by Portsmouth Naval Shipyard six working days before final delivery, which is due within 210 days of contract award. Subcontractors are bound by the same quality requirements and must be notified of required Government inspections. The contractor must provide records of all inspections, calibrations, and nonconformances, and any waivers or deviations require prior written approval from the Contracting Officer with classification as Critical, Major, or Minor. Government Source Inspection by DCMA is mandatory at the contractor’s facility, and all packaging must conform to MIL-STD-2073. The contract further enforces Buy American provisions, Small Business Set-Aside status, and strict security restrictions in accordance with recent DOD deviations. All documentation submissions, including waiver requests and quality system procedures, must be processed via the Electronic Contractor Data Submission system, requiring PKI/CAC authentication. Final shipment is prohibited until formal acceptance is granted through WAWF with designated inspection and
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details