Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

48--VALVE ASSEMBLY,PURG

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This predicted recompete opportunity involves a contract for valve assembly purging, managed by the DLA Land and Maritime under the Department of Defense. The current contract, held by Tactair Fluid Controls Inc, is valued at 41,050 dollars and is scheduled to end on October 19, 2026. The procurement is classified as a firm fixed price agreement and was previously competed under the Simplified Acquisition Procedures. The opportunity is currently listed as a pre-forecast with a medium confidence level for a likely recompete. It falls under NAICS code 336310 and is being handled by the office located in Columbus, Ohio. The primary point of contact for this requirement is Cantessa Briggs.

General Info

DLA Land and Maritime valve assembly purging recompete, firm fixed price, ending October 2026.

Agency

Department Of Defense → DLA Land And Maritime

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

Place of Performance

OH, 130884810, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedApr 19

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / AgencyDepartment Of Defense → DLA Land And Maritime

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Cantessa Briggs

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: SPE7MC26P1192 Incumbent: TACTAIR FLUID CONTROLS INC Contract Value: $41,050 Potential End Date: 2026-10-19T00:00:00.000Z Competition: COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 55/100)
https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=d4383c151b1946bfa951991e50e02f2d

Similar Contracts

Same NAICS industry code

Supply of Collar Assembly, Valve (NSN 4820-01-362-5883)This subcontract, issued by the DLA Weapons Support Nuclear Reactor Program under the Department of Defense, requires the manufacture or sourcing of eight Valve Collar Assemblies, identified by NSN 4820-01-362-5883. The contractor must ensure all units meet strict technical specifications, specifically excluding the use of additive manufacturing processes. Compliance with MIL-STD 129 for marking and RP001 for DLA packaging is mandatory for all deliverables. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336310, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 14 hours ago

DEADLINE

Engine Crankshaft Supply (NSN 2815-01-717-8078)This subcontract involves the procurement of one Engine Crankshaft to support prime contractors under DLA Weapons Support contracts. The selected provider is responsible for manufacturing or sourcing a crankshaft that strictly conforms to NSN 2815017178078 and the DLA Master List of Technical and Quality Requirements RA001. Additionally, the contractor must ensure all marking is performed in accordance with MIL-STD-129 and deliver the packaged item FOB Origin. Managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, the contract falls under NAICS code 336310. The place of performance is located in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

STEM, NEEDLE VALVE

Solicitation # SPE7MC-27-T-1312

Solicitation SPE7MC-27-T-1312 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of one needle valve stem, identified as NSN 4820016239450 and manufacturer part number D49-8-13-M from Dante Valve Company. Designated as a critical application item, the supply must be delivered to the USS Tripoli LHA 7 within 20 days after receipt of the order, with an original required delivery date of October 22, 2026. The contract specifies FOB Destination for both inspection and acceptance. The procurement includes strict technical and quality requirements per the DLA Master List (RA001) and mandates compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury. The contractor must adhere to various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

REGULATOR, ENGINE GE

Solicitation # SPE7L1-27-T-2899

Solicitation SPE7L1-27-T-2899 is a Women-Owned Small Business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of 155 units of GE Engine Regulators (NSN 2920-01-728-9980). This is a restricted source item requiring engineering source approval by the government design control activity. The required delivery date is November 9, 2026, with a delivery timeline of 40 days after order. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA Master List technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. Key regulatory clauses are incorporated, including DFARS requirements for safeguarding covered defense information, cyber incident reporting, and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

TANK, FUEL, ENGINE

Solicitation # SPE7L1-27-U-0154

Solicitation SPE7L1-27-U-0154 is a request for quotations for the procurement of engine fuel tanks, identified by NSN 2910016453684. This is a total small business set-aside for a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000 dollars. The estimated annual quantity is 20 units, with a guaranteed contract minimum of 3 units. Delivery is required within 123 days after delivery order, and the contract may result in a one-year period of performance. The procurement is subject to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, with specific emphasis on configuration change management and qualified products lists. Inspection and acceptance will occur at the origin, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging must adhere to ASTM D3951 and MIL-STD-129. The award will be made to the responsible offeror whose quote is most advantageous to the government based on price and other factors. Compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements is mandatory.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-2708

Solicitation SPE7L1-27-T-2708 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of six O-rings under NSN 5331-01-515-0324. The requirement specifies that all items must be free of asbestos and cannot contain Class I ozone-depleting chemicals. Hardware must be manufactured according to the current revision of the applicable part standard. Delivery is required by March 8, 2027, with the place of performance and acceptance located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict packaging and quality standards, requiring items to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Inspection and acceptance will occur at the destination, with sampling conducted according to MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Berry Amendment and Buy American Act. Evaluation preferences are provided for HUBZone Small Business Concerns, and offers utilizing additive manufacturing are ineligible for award.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

PUMP, FUEL, ELECTRICAL

Solicitation # SPE7M4-27-T-1936

Solicitation SPE7M4-27-T-1936, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of one electrical fuel pump, identified as a critical application item from Cummins Inc. with NSN 2910-01-605-5576. The requirement is managed under NAICS code 336310 and specifies a delivery timeframe of 20 days after order, with an original required delivery date of October 28, 2026. Shipping is designated as FOB Origin, with delivery locations in Italy and a parcel post address in the United States. The contract mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 for palletization. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and specific cybersecurity reporting standards under DFARS 252.204-7012. Quotes are to be submitted through the DIBBS portal.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-2854

Solicitation SPE7L1-27-T-2854 is a request for quotations from the DLA Weapons Support Land Supply Chain for the procurement of two O-rings, identified by NSN 5331-01-687-3913. The items are designated as critical application items and are to be delivered to the USS Cooperstown LCS 23 with an original required delivery date of October 26, 2026. Delivery is specified as FOB Destination, with inspection and acceptance also occurring at the destination. The procurement is governed by NAICS code 336310 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. Due to the potential for ultraviolet ray deterioration, the O-rings must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. General packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively. The items have a non-extendable shelf life of 180 months. The contract includes various federal and defense clauses, including requirements for safeguarding covered defense information, hazardous material identification, and the Buy American Act. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow system. Quotations are due by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

BURNER, FUEL PUMP

Solicitation # SPE8E6-27-T-0444

Solicitation SPE8E6-27-T-0444, issued by DLA Troop Support Construction and Equipment, is a small business set-aside for the procurement of 11 fuel pump burners under NSN 4230-01-524-6628. The items are to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of May 12, 2027, and a need ship date of April 26, 2027. The delivery window is specified as 167 days after award. Inspection and acceptance will occur at the point of origin, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331 with a zero-nonconformance requirement for acceptance. The contract imposes strict technical and regulatory requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates significant security and export controls, specifically RD002 for covered defense information and RQ032 for the export control of technical data under ITAR and EAR regulations. Contractors must comply with the Buy American Act and the Berry Amendment for domestic sourcing. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to NIST SP 800-171 and CMMC Level 2 cybersecurity standards. Price evaluation preferences are available for HUBZone small business concerns, and the buy may be subject to automated award.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

COLLAR ASSEMBLY, VALVE

Solicitation # SPE7M2-27-T-0447

Solicitation SPE7M2-27-T-0447 is a request for quotations issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of eight valve collar assemblies, identified by NSN 4820013625883. This critical application item, specifically Curtiss-Wright Electro-Mechanical part number 12575F18, is subject to a delivery window of 167 days, with a need ship date of April 26, 2027, and an original required delivery date of March 7, 2028. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement includes strict technical and quality requirements, prohibiting the intentional addition of mercury or mercury-containing compounds and banning the use of additive manufacturing unless specifically authorized. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001). Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. This is not a small business set-aside, and offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE7M0-27-T-0813

Solicitation SPE7M0-27-T-0813 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of two O-rings (NSN 5331-01-669-5446). The requirement is under NAICS code 336310, with a delivery timeline of five days after receipt of order and a required delivery date of October 26, 2026. Delivery is FOB Origin to the Naval Facility in Everett, Washington, with both inspection and acceptance occurring at the destination per FAR 52.246-1. The contract mandates strict adherence to technical and quality requirements, including supply chain traceability documentation and the prohibition of asbestos and class I ozone-depleting chemicals. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117 for UV protection, while marking must follow MIL-STD-129 with a specific shelf-life code. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold. All quotations must be submitted through the DIBBS portal by November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

ADJUSTING, SCREW VAL

Solicitation # SPE7MC-27-T-1311

Solicitation SPE7MC-27-T-1311 is a small business set-aside fixed-price contract issued by the Defense Logistics Agency for the procurement of one copper alloy end item angle valve, specifically an adjusting screw valve. The requirement identifies the item under NSN 4820-01-486-4802, referencing Dante Valve Company part numbers B4024 and D4000FF. The item is designated as a critical application item and must be delivered FOB Destination to the USS Makin Island (LHD 8) at FPO AP 96672. The original required delivery date is June 25, 2026, with a delivery lead time of 20 days after award. The contract mandates strict adherence to technical and quality requirements via the DLA Master List (RA001) and prohibits the intentional addition of mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001). Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment, and compliance with the Buy American Act and DFARS cybersecurity and telecommunications regulations.

Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

Pressure Switch Component SupplierThe Pressure Switch Component Supplier subcontract involves providing essential raw materials and sub-components to prime contractors manufacturing pressure switches for DLA Land and Maritime. The scope of work includes the delivery of high-grade alloys, specialized polymers, conductive materials, springs, electronic contacts, and specialized seals. All supplied materials must adhere to strict performance tolerances and specific coating requirements to ensure operational integrity. To maintain quality standards, the supplier is required to provide comprehensive material certifications and Certificates of Conformance for all deliveries. The contract falls under NAICS code 335999 and supports the Department of Defense. Interested parties should note the response deadline of November 4, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

Pressure Switch Manufacturer (NSN 5930-01-324-5328)This subcontract involves the manufacture and supply of pressure switches, specifically NSN 5930-01-324-5328, for prime contractors supporting DLA Land and Maritime hardware. The selected provider must utilize precision machining and assembly equipment to fabricate these switches in strict accordance with military specifications or approved technical data. A critical requirement of the contract is the submission of application packages through the DLA Weapons Support Alternate Offer/Source Approval Request Program to obtain AMC 3C approval. This opportunity falls under NAICS code 335313 and is managed by the Department of Defense.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 19 hours ago

DEADLINE

Switch, Pressure

Solicitation # CM26239122

DLA Land and Maritime, specifically the FMS Tactical LTC Team at DLA Weapons Support - Columbus, is conducting a sources-sought market survey for the procurement of Pressure Switches under NSN 5930-01-324-5328. The agency is seeking information from potential vendors regarding delivery timelines, quantity capabilities, and pricing structures to determine the feasibility of an Indefinite Delivery Contract with a proposed three-year base period and subsequent one-year option periods. The government is specifically looking for data on commercial availability and is requesting drawings or bills of materials to identify similarities between commercial and military equivalents. The current approved source for this item is Cameron Energy Services Corp, identified by CAGE code 05991 with multiple associated part numbers. Due to the AMC 3C designation, this part requires engineering source approval to maintain quality, as the approved sources retain essential technical data and manufacturing knowledge. Other companies wishing to be qualified as approved sources must submit an application package through the DLA Weapons Support Alternate Offer/Source Approval Request Program to demonstrate their ability to manufacture the product to the same or better quality than the original equipment manufacturer. Responses should be directed to Contract Specialist Caitlin Ferry by the deadline of November 4, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 19 hours ago

DEADLINE

INSULATING COMPOUND,ELECTRICAL

Solicitation # CM26161009

This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 1 month

HEADSET-MICROPHONE : NSN 5965-01-204-8505

Solicitation # SPE7MX26RX089

This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7MX26RX102

DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.

Hardware Manufacturing

POSTED

DEADLINE

in about 1 month

Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.

POSTED

DEADLINE

MULTI NSN DIESEL ENGINE

Solicitation # CM26259595

DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

VALVE, REGULATING, FL

Solicitation # CM26163006

DLA Weapons Support is conducting a sources sought action under project number CM26163006 to identify potential manufacturers for a regulating fluid valve, identified by NSN 4810010865757. The agency is seeking to establish a long-term contract with an estimated annual quantity of 301 units. This opportunity falls under NAICS code 332912 for Fluid Power Valves and Hose Fittings manufacturing, with a small business size standard of 1,000 employees. Because the agency does not possess the drawings or specifications for these items, interested parties must submit the required documentation per DLAD 52.217-9002 to become approved sources. Prospective bidders are required to complete a market survey and spreadsheet, providing manufacturer locations and points of contact. All responses must be submitted to Kristina Blanton by October 29, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

in about 9 hours

Earlier notices in this NAICS code

Posted before this notice, open and closed

48--VALVE,DEADMAN

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

48--LEVER,HOUSING

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

49--SLING,ENGINE AND TR

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

FUEL PUMP & METERIN

Solicitation # SPRPA125QES02

Pa DLA Aviation At Philadelphia

POSTED

over 1 year ago

CLOSED

over 1 year ago

29--PUMP,FUEL,METERING

Solicitation # SPE7L525T1237

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

29--FILTER ELEMENT,FLUI

Solicitation # SPE7LX25U4930

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # N0010425QZC34

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

48--VALVE,ROTARY,SELECT

Solicitation # SPE7MC25T9510

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

48--VALVE,SOLENOID

Solicitation # SPE7MC25T5385

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

48--VALVE,SOLENOID

Solicitation # SPE7MC24T325V

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

25--MOTOR,HYDRAULIC

Solicitation # SPE7LX25U5214

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

29--FILTER ELEMENT,FLUI

Solicitation # SPE7LX25U5404

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS