Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

49--SOLE SOURCE AWARD FOR PURCHASE AND INSTALL OF REFUEL AUTOMATED DATA COLLECTION SYSTEM

Active
W9124G12QDF01Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The MICC at Fort Rucker is planning to issue a sole-source, firm fixed-price purchase order to Syn-Tech Systems, Incorporated for the provision and installation of a Refuel Automated Data Collection (ADC) System on four additional tanker fleet vehicles. Syn-Tech Systems previously installed this system on earlier fleet vehicles, and this follow-on procurement is being conducted under simplified acquisition procedures and authorized as an Other than Full and Open Competition action per FAR 6.302-1. This is not a solicitation requesting competitive proposals or quotes; rather, any information provided by interested parties will be used solely to determine whether a competitive procurement is warranted. The decision to proceed without competition lies exclusively with the government. The contract incorporates clauses effective as of July 2012, including standard Federal Acquisition Regulation terms for commercial items, delivery terms, electronic payment submissions, and requirements related to contractor registration and corporate representations. The North American Industry Classification System code for this requirement is 334519, with a size standard of 500 employees. Daphne Foster is the government point of contact for this procurement, and interested parties could submit relevant information via email by August 8, 2012. The overall objective is to continue deployment of the ADC system to additional vehicles within the Fort Rucker tanker fleet to enhance automated fuel data collection capabilities.

General Info

Sole-source purchase order to Syn-Tech for ADC system installation on four Fort Rucker tankers.

NAICS

334519 - Other Measuring and Controlling Device Manufacturing

Place of Performance

AL

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Ft Rucker
ContactsNo contacts available
OfficeFORT RUCKER, AL, 36362, USA
Office AddressFORT RUCKER, AL, 36362, USA
ContactsNo contact information available

Full Description

Show more
The MICC -Fort Rucker intends to award a sole-source purchase order to Syn-Tech Systems, Incorporated to provide and install a Refuel Automated Data Collection (ADC) System in four additional tanker fleet vehicles at Fort Rucker, Alabama. Syn-Tech Systems, Incorporated installed the ADC system in the older fleet vehicles. The intent is to issue a firm fixed price purchase order on a sole source basis under simplified acquisition procedures and Other than Full and open Competition as authorized by FAR 6.302-1. This notice is neither a request for competitive proposals nor a solicitation of offers. Quotes are not being requested and a written solicitation will not be used. Interested contractors must provide information no later than 4:00 p.m. CST on 8 August 2012 via email to contact@example.gov. A determination by the government not to compete this requirement based on responses to this notice is solely within the discretion of the government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. The intent of this procurement is to award based on Sole Source Acquisition. Incorporated Clauses and Provisions are those in effect through Federal Acquisition Circular 2005-60 effective 26 July 2012 and DFARs DPN 20120724 effective 24 July 2012. North American Industry Classification System Code for this requirement is 334519 and the size standard is 500 employees. The point of contact is Daphne Foster at +1 (555) 000-0000 or contact@example.gov . The following clauses and provisions apply to this requirement: 52.212-4 Contract Terms and Conditions; 52.212-5 Alt 1 Full Text Contract Terms and Conditions Required to Implement Statues or Executive Orders Commercial Items; 52.247-34 FOB Destination; 52.252-2 Clauses Incorporated by Reference available at http://farsite.af.mil or www.arnet.gov; 52.252-6 Authorized Deviation in Clauses; 252.204-7007 Required CCR Registration; 252.212-7001 (DEV) Contract Terms and conditions; 252.232-7003 Electronic Submission of Payment Request. 252.209-7999 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony conviction funder any Federal Law (Deviation 2012-00004) (Jan 2012)

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → W6QM Micc-Ft Rucker

Same awarding agency

NAICS: 561621
Federal
W9124G26CBARRACKS
Solicitation # 052917
The Department of Defense is seeking a small business contractor under a firm-fixed price contract to provide security camera maintenance and integration services for four barracks facilities at Fort Rucker, Alabama. The scope of work involves integrating IP cameras and network hardware from Buildings 8354, 8355, and 8356 into a centralized monitoring station in Building 8350, as well as performing semi-annual preventative maintenance inspections based on a 12-point checklist. The contract spans a five-year period, consisting of a 12-month base year for integration and maintenance, followed by four optional 12-month maintenance-only years. Award will be based on the Lowest Price Technically Acceptable (LPTA) process, where quotes are ranked by price and evaluated on a pass/fail basis for technical capability. To be deemed acceptable, offerors must demonstrate a feasible integration approach, a compliant maintenance plan, and the ability to meet strict response times, including a one-hour telephone response and four-hour on-site arrival for critical system failures. Contractors must also commit to a one-year warranty on new parts and labor, adhere to a 250 dollar pre-approval threshold for replacement parts, and ensure personnel complete AT Level I and iWATCH training within 90 days of award. The procurement is a 100 percent total small business set-aside under NAICS code 561621. Interested parties must submit a two-volume proposal consisting of a technical capability narrative and a pricing schedule by November 17, 2026. All work must comply with Fort Rucker building codes and Department of Production Works specifications, with final inspections conducted by the DPW. Repair and replacement parts are funded through a government-established not-to-exceed allowance of 3,000 dollars per year.
Security Systems Services (except Locksmiths)

POSTED

12 days ago

DEADLINE

in 21 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS