This Government Contract opportunity from New York was posted on September 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

4x4 UTV Crew Cab Chassis Supply

Closed

State & Local

Submission Closed09/16/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336211

New

SLED

Specialized Vehicle Body & Safety OutfittingThis subcontract for Specialized Vehicle Body and Safety Outfitting involves the custom fabrication and installation of safety mounts and cab modifications for Jefferson County ARFF vehicle projects. The scope of work includes the fabrication of SCBA mounts specifically for Scott brand equipment, the installation of lateral accelerometers, and the fitting of watertight roof hatches for emergency exits in compliance with NFPA 1900 standards. The final deliverable is a fully outfitted vehicle cab and body equipped with all required safety mounts and emergency exits. The project is categorized under NAICS code 336211 and is associated with Jefferson County. Interested parties should note that the response deadline is December 9, 2026, with the solicitation having been posted on November 2, 2026.

POSTED

DEADLINE

Mobile Medical Clinic Vehicle

Solicitation # RFP 739-SL3838904

Texas Tech University Health Sciences Center (TTUHSC) is soliciting proposals under RFP 739-SL3838904 for a turnkey Mobile Medical Clinic Vehicle to support community healthcare, preventive care, vaccinations, and clinical examinations. The scope of work includes the provision of a base vehicle and a comprehensive medical conversion featuring an accessibility lift, HVAC and electrical systems, cabinetry, an exam area, plumbing, and a vaccine refrigerator. Proposers may also provide optional pricing for a generator and exterior graphics, such as full vehicle wraps or partial decals. The contract requires the supplier to provide operator training on vehicle systems and maintenance. The anticipated term of the agreement begins upon execution and expires on August 31, 2027. The award will be based on the best value, considering price, proposer reputation, and the ability to meet TTUHSC's specific needs. Proposals must be submitted via the TechBid system by 4:30 PM Central Time on December 2, 2026. Required submission components include a signed Execution of Offer, a VetHUB Subcontracting Plan, and an Addenda Checklist. The selected provider must comply with Title VII Federal Occupational Safety Health Law and the Texas Hazard Communication Act. Additionally, the supplier must warrant that they are not excluded or debarred from federal or state healthcare programs and must adhere to the university's required contract and IT terms.

Texas Tech University Health Sciences Center

POSTED

DEADLINE

Supply of Vehicular Seat Cover (NSN 2540-66-153-2079)This subcontract involves the supply of one vehicular seat cover, specifically part number NSN 2540-66-153-2079, for prime contractors working under the DLA Weapons Support Land Supply Chain. The project falls under NAICS code 336211 and requires the final product to be delivered FOB Origin within 10 days of the contract award. Strict adherence to packaging and marking standards is required, with materials packaged according to ASTM D3951 or TQ Requirement IP025 for hazardous materials per FED-STD-313. Additionally, all packaging must be marked in accordance with MIL-STD-129. Performance for this contract is centered in Clackamas, Oregon.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Vehicle Upfitting & Mounting IntegrationThis subcontract opportunity, titled Vehicle Upfitting and Mounting Integration, involves the final integration and mounting of a prototype body onto a vehicle chassis for USDA fire engine projects. The selected contractor will be responsible for installing the fabricated body using heavy-duty lifting equipment and specific mounting hardware to ensure full compliance with FMVSS 301-75 standards, ultimately delivering a completed Type 6 Fire Engine prototype. The project is being managed for the Department of Agriculture through Csa Intermountain 4 Usda-Fs, with performance taking place in San Dimas, California. This is a total Small Business Set Aside under NAICS code 336211. The solicitation was posted on November 2, 2026, and requires a response by November 13, 2026.

Csa Intermountain 4 Usda-Fs

POSTED

DEADLINE

Type 6 Fire Engine Platform Body

Solicitation # 1240LP27Q0005

The United States Department of Agriculture, through the Csa Intermountain 4 Usda-Fs, is soliciting quotations for the provision and installation of one Type 6 Fire Engine Prototype Platform Body. This project involves the upfitting of a government-furnished 2025 model year 4X4 gas Ford cab and chassis with a 19,500 GVWR. The selected contractor is responsible for picking up the chassis in San Dimas, California, performing the installation at their own U.S. facility, and delivering the completed unit to Laurel, Mississippi. Following delivery, the contractor must provide operational training to the receiving unit within one month. The contract is a total small business set-aside under NAICS code 336211 and will be awarded based on the lowest price technically acceptable criteria. Technical requirements include adherence to Model 643P apparatus body specifications, American Welding Society Standards, and FMVSS 301-75 mounting standards. The platform must be constructed from at least 12-gauge galvanneal treated steel. Key deliverables include a production schedule due within two months of issuance, monthly status updates to the Contracting Officer's Representative, and a final inspection notification one month prior to completion. Award evaluation will focus on technical acceptability and a record of acceptable or neutral past performance.

Csa Intermountain 4 Usda-Fs

POSTED

DEADLINE

TRUNNION ASSEMBLY, END

Solicitation # SPE7L4-27-T-0730

Solicitation SPE7L4-27-T-0730 is a request for quotations issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of two right-hand end gate trunnion assemblies, identified by NSN 2510-01-155-5849 and General Motors part number 14021386. The requirement specifies a delivery timeline of five days after order, with an original required delivery date of October 29, 2026. Shipping is designated as FOB Origin, with the final destination for both inspection and acceptance located at Fort Irwin, California. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring compliance with DLA packaging requirements RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, notably those concerning the Buy American Act, NIST SP 800-171 cybersecurity assessments, and the safeguarding of covered defense information. Offerors are required to maintain current representations and certifications within the System for Award Management and submit their quotes via the DIBBS portal.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Passenger Van Upfitting and CustomizationThis subcontract for Passenger Van Upfitting and Customization involves performing specialized vehicle modifications for prime contractors supporting the Lenawee Intermediate School District in Michigan. The scope of work includes the installation of midrise-roof conversions, All-Wheel Drive systems, vinyl seating, and rubber or vinyl flooring to ensure vehicles meet the specific interior and body requirements of the district. The project falls under NAICS code 336211 and requires the delivery of fully customized passenger vans ready for final distribution. Interested parties should note that the solicitation was posted on November 1, 2026, with a response deadline of November 19, 2026.

Lenawee Intermediate School Di

POSTED

DEADLINE

Solicitation # 582-27-15466-1

The Texas Commission on Environmental Quality (TCEQ) is soliciting bids for the outfitting of two Mercedes 2500 All-Wheel Drive Sprinter Vans to serve as Mobile Ambient Air Monitoring Platforms. The project requires an approved Mercedes outfitter to perform extensive modifications to ensure vehicle warranties remain intact. Key technical requirements include the installation of a Tier 4 diesel generator with a sealed enclosure that maintains interior noise levels below 60 dB, 10-gauge aluminum cabinetry and shelving, and specialized exterior additions such as weatherproof fasteners, flashing light bars, and custom exhaust ducts for SIFT-MS equipment. The vendor must also provide electrical schematics and a minimum 30-minute training session for TCEQ staff. Bids are due by November 6, 2026, at 2:00 PM CST, and will be evaluated based on exact technical conformity and the best interest of the state, often favoring the low line-item or total bid. Awarded vendors must adhere to strict insurance mandates, including Commercial General Liability and Worker's Compensation with an A.M. Best rating of A- or better, and must name TCEQ as an additional insured. The contract includes a two-year warranty covering electrical, generator, and water intrusion issues. Performance is subject to a 45-day testing and acceptance period upon delivery, with final payment processed according to the Texas Government Code.

Texas Commission on Environmental Quality

POSTED

DEADLINE

This solicitation is to provide quotes to Reverse Auction for 14 Type 6 Engine beds to be built for the purpose of wildland fire fighting with MS Forestry Commission.

Solicitation # 1451-27-R-RFQF-00001

The Mississippi Forestry Commission is soliciting quotes via a reverse auction for the complete upfit of fourteen Type 6 wildland fire engines. The project involves furnishing and installing apparatus bodies, emergency warning equipment, electrical systems, and 300-gallon wildland firefighting skid units onto fourteen 2026 Ram 5500 crew cab chassis provided by the commission. All completed units must be delivered to the state office in Pearl, Mississippi, within nine months of the accepted bid date. The contract is awarded to the lowest responsible bidder who meets all technical specifications, including the requirement to provide CAD design drawings for approval before fabrication begins. Key technical requirements specify that plumbing must use TIG-welded stainless-steel manifolds with Grade 5 stainless steel hardware, and the skid units must adhere to strict dimensional and weight limits. Bidders must certify that they are not suspended or debarred from federal assistance programs and must provide detailed component descriptions and manufacturer warranties at delivery. The state is exempt from federal, state, and local taxes. The contract may be canceled by the commission with 30 days' written notice, and any subcontracting requires prior written consent. Responses are due by November 16, 2026, and can be submitted through the MAGIC e-procurement system or via paper submission.

MS FORESTRY COMMISSION

POSTED

DEADLINE

LINEMAN BUCKET TRUCK (CPN)The Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the procurement of a Lineman Bucket Truck for the Columbia-Pacific Northwest region. This requirement is categorized under NAICS code 336211, which pertains to the manufacture of motor vehicles and utility trucks. The procurement process is managed by Kelli Jasperson, who serves as both the primary point of contact and the Small Business Specialist. While specific performance locations and set-aside details are not yet defined, the forecast is intended to notify potential vendors of the agency's upcoming equipment needs.

Bureau of Reclamation

POSTED

DEADLINE

FD Transport Safety Vehicle (CPN)The Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the procurement of an FD Transport Safety Vehicle for the Columbia-Pacific Northwest region. This requirement is categorized under NAICS code 336211, which pertains to the manufacture of motor vehicles. The forecast was posted on October 30, 2026, and identifies Kelli Jasperson as both the primary point of contact and the Small Business Specialist for this action. Further details regarding the solicitation and specific performance locations are currently pending.

Bureau of Reclamation

POSTED

DEADLINE

ADA Prisoner Transportation Van Supply & ConversionThis subcontract involves the supply and conversion of a Ford Transit Cargo Van for prime contractors supporting prisoner transport projects for the County of Merced in California. The primary objective is the delivery of one ADA-compliant prisoner transportation van, specifically utilizing the Transit Wheelchair Transporter Package (LWBR-1) to meet accessibility standards for wheelchair transport while maintaining the original OEM bench seats. The project falls under NAICS code 336211 and is managed through the County of Merced. Interested parties should note that the response deadline for this opportunity is November 24, 2026.

County of Merced

POSTED

5 days ago

DEADLINE

in 21 days

AI Contract Overview

This subcontract involves the supply of modified 4x4 Intimidator UTV crew cab chassis to prime contractors for FDNY vehicle procurement projects. The primary objective is to provide the base vehicle chassis necessary for ASAP units, ensuring that all equipment meets the specific FDNY EMS operational requirements for off-road navigation across the five boroughs of New York City. The contract is categorized under NAICS code 336211 and is managed by the New York Fire Department. It was posted on September 4, 2026, with a response deadline of September 16, 2026, and the place of performance is located within New York City.

General Info

Subcontract for supplying modified 4x4 Intimidator UTV chassis for FDNY ASAP vehicle projects.

Agency

New York → Fire Department

NAICS

336211 - Motor Vehicle Body Manufacturing

Place of Performance

New York, NY, USA

Set-Aside

NONE

Documents

This scope was carved out of 05727Y0653.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

05727Y0653-Pin # 712 - ASAP Units

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 4

subcontract

Response DeadlineSep 16

Deadline has passed

Submission Closed

09/16/2026, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNew York → Fire Department

ContactsNo contacts available

OfficeN/A

Organization / AgencyNew York → Fire Department

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies 4x4 modified Intimidator UTV crew cab chassis for prime contractors on FDNY vehicle procurement projects. Provides the base vehicle chassis required for the ASAP unit, ensuring the chassis meets FDNY EMS operational requirements for off-road navigation in the five boroughs. Delivers the modified 4x4 UTV crew cab chassis.