Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

51--HOLDER,TOOL SET

Awarded

SPE4A726T9246Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract award pertains to a 51-piece tool set, identified by solicitation number SPE4A726T9246, issued by the Defense Logistics Agency Aviation under the Department of Defense. The opportunity was posted on May 27, 2026, and is classified as an award notice with no set-aside provisions specified. The North American Industry Classification System code 332216 applies, indicating the equipment falls under the manufacturing category for hand tools. The awarding office is located in Richmond, Virginia, with a ZIP code of 23237, and no specific place of performance details were provided. Tasia Carney serves as the primary point of contact, reachable via email at [email hidden] or by phone at [phone hidden]. Further information and access to the full contract details can be obtained through the SAM.gov workspace link provided.

General Info

Contract for standard tool set awarded by DLA Aviation to eligible vendors, no set-asides, Tasia Carney contact.

Agency

Department Of Defense → DLA Aviation

Contract Value

$52,395

NAICS

332216 - Saw Blade and Handtool Manufacturing

Place of Performance

VA, USA

Set-Aside

NONE

Awardee

Award Issued Date

05/27/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedMay 27

Award Notice

AwardedMay 27

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / AgencyDepartment Of Defense → DLA Aviation

Office AddressRICHMOND, VA, 23237, USA

Contacts

Tasia Carney

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=f9ae830b6f5a450ca8be79b8955b9ddb

Similar Contracts

Same NAICS industry code

Fire Rescue Rotary Saw - Blades

Solicitation # 2026-IFB-232

The City of Pittsburgh Office of Management and Budget, on behalf of the Bureau of Fire, is soliciting bids under solicitation number 2026-IFB-232 for the procurement of 14-inch diameter vacuum-brazed diamond blades. The required blades must be compatible with the K970 Rescue Rotary Saw and designed for cutting materials such as PVC pipes, fiber board, rebars, stone, and tiles. While the Husqvarna VARI-CUT FR3 is the specified standard, bidders may propose an equal or greater alternative provided they submit supporting documentation. All items must be delivered in first-class condition and packaged suitably for handling and storage. The contract will be awarded to the lowest responsive and responsible bidder on either an item-by-item or low-total basis. Bidders must meet strict responsiveness and responsibility criteria, including a lack of fraudulent history and a commitment to equal opportunity employment. The submission deadline is November 23, 2026, at 12:00 pm, with all responses required to be submitted electronically. Awarded vendors must provide performance and payment bonds totaling 100 percent of the contract price within 10 calendar days of notice. Key administrative requirements include compliance with the City Service Worker Prevailing Wage Ordinance and specific disadvantaged business enterprise participation goals: 18 percent for MBEs, 7 percent for WBEs, 5 percent for VOSBs, and 3 percent for LGBTQIA+ businesses. Invoicing must occur within 30 days of delivery, and the City intends to process payments within 45 calendar days, though it will not pay interest or late charges. Bidders must also submit a completed EORC Participation Form and a Statement of Affiliations to be considered responsive.

POSTED

about 18 hours ago

DEADLINE

Wrench Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of Wrench Assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider must manufacture items according to NSN 5120-01-059-6402 and DLA technical data, ensuring all products are packaged per ASTM D3951 and RP001 and labeled in accordance with MIL-STD-129. Performance for this contract will take place in Tracy, California. Due to the nature of the technical data, the contractor is required to hold US/Canada Joint Certification Program certification and maintain approved access to export-controlled information under ITAR and EAR regulations. Interested parties must submit their responses by November 4, 2026, to provide completed and labeled assemblies under NAICS code 332216.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Supply of Fuseholder, Extractor Post (NSN 5920015478627)

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

Precision Hand Tool Supply

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Router Bit Supplier (NSN 3230-01-162-2440)

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

PULLER KIT, UNIVERSAL

Solicitation # SPE4A7-27-T-2158

Solicitation SPE4A7-27-T-2158 is a fixed-price request from the Defense Logistics Agency (DLA) Weapons Support ASC for the procurement of one universal puller kit, identified by NSN 5180-01-727-7881. The required delivery date is April 30, 2027, with a delivery period of 176 days. Shipping is based on FOB Origin under the First Destination Transportation program, and both inspection and acceptance will occur at the destination. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. The contract imposes strict technical and regulatory requirements, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical data associated with this item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the solicitation includes a price evaluation preference for HUBZone small business concerns and requires adherence to the Buy American Act and Berry Amendment regarding domestic sourcing. Quality assurance will be managed via zero-based sampling plans such as MIL-STD-1916 or ASQ H1331.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-7077

Solicitation SPE4A6-27-T-7077 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of eight socket wrenches. The items are identified as Commercial Off The Shelf (COTS) products, specifically referencing NSN 5120-01-528-0179 and part number 33901601 from OVC-Engineered Solutions LLC. The required delivery date and need ship date are both set for August 2, 2027, with a delivery period of 270 days after order. Shipping is designated as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled according to MIL-STD-129, and palletization must comply with RP001. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing through the Wide Area WorkFlow (WAWF) system and compliance with various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and specific cybersecurity reporting standards under DFARS 252.204-7012. Quotations must be submitted via DIBBS by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

TOOL INSTALL REMOVE

Solicitation # SPE4A6-27-T-5046

Solicitation SPE4A6-27-T-5046 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of two Tool Install Remove units, identified by NSN 5120-01-223-0058. This is a Foreign Military Sales requirement supporting the Netherlands, with a required delivery date of September 17, 2026, and a delivery lead time of 20 days after order. The items are to be delivered FOB Origin to a shipping address in Den Helder, Netherlands, via a freight forwarder in Columbia, Maryland. The contract mandates strict adherence to quality and technical standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin per FAR 52.246-2, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging and palletization must follow RP001 and MIL-STD-2073-1E, while marking must comply with MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for cybersecurity. Evaluation may be automated, and a price preference is available for certified HUBZone Small Business Concerns.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8E5-27-T-0303

Solicitation SPE8E5-27-T-0303 is a small business set-aside issued by the Defense Logistics Agency Troop Support Construction and Equipment office for the procurement of two router bits, identified by NSN 3230-01-162-2440 and SGS Tool Co part number 73021. The requirement specifies a delivery timeline of 10 days after receipt of order, with an original required delivery date of October 22, 2026. Delivery is set as FOB Origin, with the freight shipping destination located in Norman, Oklahoma. Inspection and acceptance will take place at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and the removal of government identification from non-accepted supplies is required per RQ011. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. Additionally, the contractor must adhere to cybersecurity protocols for safeguarding covered defense information and follow specific labeling standards for any hazardous or radioactive materials.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

TOOL KIT, VEHICLE, ARMOR

Solicitation # SPE4A7-27-T-2146

Solicitation SPE4A7-27-T-2146 is a request for quotations from the Defense Logistics Agency (DLA) for the procurement of 36 armored vehicle tool kits, identified by NSN 5180-01-658-9830. The contract requires adherence to a comprehensive set of technical data and reference drawings, with a delivery schedule of 271 days after receipt of order and a required delivery date of October 31, 2027. Performance is based on FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict quality and security compliance, including CMMC Level 2 certification and adherence to SAE AS9100 and ISO 9001:2015 standards. Inspection and acceptance will occur at the origin. Packaging and marking must comply with MIL-STD-129 and RP001, while hazardous materials must be labeled according to 29 CFR 1910.1200. Additionally, the contract is subject to the Buy American Act, ITAR/EAR export controls, and DFARS requirements for safeguarding covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

WRENCH ASSEMBLY, WRENCH

Solicitation # SPE4A6-27-T-7019

Solicitation SPE4A6-27-T-7019 is a federal procurement issued by the DLA Weapons Support ASC Commodities Division for the acquisition of two wrench assemblies, identified by NSN 5120-01-059-6402. The requirement is set for delivery to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of September 2, 2027, and a delivery window of 301 days after the order is placed. The contract is established as FOB Origin, with inspection and acceptance occurring at the destination. This procurement is subject to strict export controls under ITAR and EAR regulations, requiring offerors to possess an approved US/Canada Joint Certification Program certification and DLA authorization to access technical data. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. The award process may be automated, with a price evaluation preference granted to HUBZone certified concerns. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system. The solicitation also incorporates various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and the prohibition of covered defense telecommunications equipment. Quotations must be submitted via the DIBBS portal by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

FUSEHOLDER, EXTRACTOR P

Solicitation # SPE7M5-27-T-1569

Solicitation SPE7M5-27-T-1569 is a small business set-aside request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 12 units of Fuseholder, Extractor Post, identified by NSN 5920015478627. The requirement is governed by Technical Data Package Rev A Gen 1 and must comply with MIL-PRF-19207/24N(1) and MIL-PRF-19207G. This item is listed as a primary Qualified Products List or Qualified Manufacturers List item, making those lists applicable to the procurement. The delivery terms are FOB Origin with a delivery period of 161 days after receipt of order, with a required ship date of April 20, 2027, and a destination of DLA Dist San Joaquin in Tracy, California. The contract mandates strict adherence to packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and requires compliance with DLA packaging requirements for procurement under RP001. Special material restrictions apply, including the prohibition of intentionally added mercury per NAVSEA 5100-003D and adherence to the Buy American and Balance of Payments Program. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Evaluation will consider the HUBZone price preference, and offers utilizing additive manufacturing are ineligible for award unless specifically authorized. Quotations are due by November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

NSN 6150-21-920-2797 - CABLE ASSEMBLY, SPECIAL ELECTRI

Solicitation # SPE4A6-27-R-0079

DLA Aviation is conducting market research to identify qualified sources capable of providing a special purpose electrical cable assembly, identified by NSN 6150-21-920-2797 and part number 6537C026-2 from Indal Technologies Inc. This Sources Sought notice is intended to help the government determine the most appropriate procurement method, which may result in a small business set-aside or full and open competition. This notice is not a formal solicitation or a request for proposals, and the government assumes no financial responsibility for costs associated with responding. Interested parties must submit their cage code, manufacturing location, and point of contact information to Brenda Spell via email by October 27, 2026. Telephone inquiries will not be accepted, and no feedback will be provided regarding individual submissions.

Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 2 months

PANEL, STRUCTURAL, AIRCRAFT / NSN 1560-01-646-5571 / B-52 AIRCRAFT

Solicitation # SPE4A727R0101

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 2 months

FILTER ELEMENT, FLUID / QPL NSN 1650-00-484-6918 / B-52 AIRCRAFT

Solicitation # SPE4A727R0088

DLA Aviation is conducting market research to identify qualified sources for the manufacture and supply of fluid filter elements, specifically NSN 1650-00-484-6918 for B-52 aircraft. This sources sought notice is not a solicitation, but a means to determine the procurement method, which may result in a small business set-aside or full and open competition. The requirement covers a five-year base period and includes all labor, materials, and equipment necessary for production, inspection, testing, and shipping. Interested parties must submit their organization details and tailored capability statements to Christopher Rose by October 28, 2026. Because DLA Aviation does not possess complete technical data for this part, any contractor not already on the Qualified Products List, such as PTI Technologies or Pall Aeropower, must submit a Source Approval Request package. Evaluation will focus on the provider's technical resources, financial stability, and ability to manage tight schedules and performance-based contract requirements under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 2 months

Specialized Hardware & Fittings Supply

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Aircraft Engine/Transmission Components Supply

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Aircraft Hardware & Fasteners Supply

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Hydraulic & Pneumatic Component Supply

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

AIRCRAFT, FIGHTING FALCON F-16; HOUSING, ANTIFRICTION BEARING

Solicitation # SPE4A727R0029

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

6220-01-473-2116; 26F; F-16 AIRCRAFT

Solicitation # SPE4A627R0181

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE

NSN 2835014677434; NOZZLE ASSEMBLY,TURBINE,NONAIRCRAFT GA; WSDC 05F; APPL F-16

Solicitation # SPE4A527Q0053

Turbine and Turbine Generator Set Units Manufacturing

POSTED

DEADLINE

“NSN 1680-01-553-0271, PANEL,FAULT-FUNCTIO, WSDC: 40A, HELICOPTER, BLACKHAWK, UH-60A, UH-60L, HH/UH-60M, UH-60V.”

Solicitation # SPE4A527R0030

DLA Aviation is seeking proposals for a firm-fixed price contract to procure 26 Fault-Function Panels, part number 70902-01110-049, for use in Blackhawk helicopters. The required delivery is 181 days after receipt of order to New Cumberland, Pennsylvania. This is an unrestricted acquisition with inspection and acceptance occurring at the origin. Sikorsky Aircraft Corporation is the currently approved source; any other manufacturer wishing to bid must submit a complete source approval package. Technical data packages are unavailable. Award decisions will be based on a combination of price, past performance, and other evaluation factors, with Supplier Performance Risk System standards applying. The estimated solicitation issue date is November 13, 2026, with an anticipated closing date of December 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

NSN 5995-01-502-8002 - CABLE ASSEMBLY, RADIO FREQUENCY

Solicitation # SPE4A6-27-R-0069

This indefinite quantity contract, issued by DLA Aviation, is for the procurement of 56 radio frequency cable assemblies used in FA-18 aircraft, including A-D, E/F, and G Growler models. Due to the critical nature of the application, approved sources are limited to Times Microwave Systems, Inc. and The Boeing Company. The contract features a five-year base period without options, with pricing evaluated based on an estimated annual demand of 56 units. Delivery is required within 124 days after receipt of order, with shipping terms set as FOB Origin and delivery to various facilities across the Continental United States. Interested offerors must submit a completed solicitation package, as electronic offers are not acceptable. The solicitation is expected to be issued around November 12, 2026, with a response deadline of December 14, 2026.

Other Electronic Component Manufacturing

POSTED

DEADLINE

in about 2 months

Earlier notices in this NAICS code

Posted before this notice, open and closed

51--TOOL KIT,VEHICLE,TA

Solicitation # SPE4A726T9035

POSTED

DEADLINE

51--TOOL KIT,AIRCRAFT M

Solicitation # SPE4A726T318W

POSTED

DEADLINE

Sources Sought: NSN 5180-00-596-1509, Toolkits Pipefitter Supplement (PSTK)

Solicitation # PIPEFITTERTOOLKIT2026

POSTED

CLOSED

WRENCH SET, SPANNER

Solicitation # SPE4A726R0604

POSTED

CLOSED

Manufacture of Screwdriver Tool Kits (NSN 5180-01-329-0269)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Rynglok Fitting Tool Set

Solicitation # N68335-26-R-1073

Navair Warfare Ctr Aircraft Division

POSTED

CLOSED

NSN 5180-00-178-0046 | Tool Kit, Screw Thread Insert |

Solicitation # Z5010052385036

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

51--TOOL KIT,FIBER OPTI

Solicitation # SPE4A726T381N

POSTED

CLOSED

Small Arms Tool Kit (SARTK) Manufacturing and Assembly

POSTED

CLOSED

SOCKET, WRENCH, FACE

Solicitation # SPE4A6-26-T-50F2

ASC COMMODITIES DIVISION

POSTED

CLOSED

JAW, VISE, HAND

Solicitation # SPE4A6-26-T-59V7

ASC COMMODITIES DIVISION

POSTED

CLOSED

52--GAGE,BREECH SPACE

Solicitation # SPE8E526T2902

DLA Troop Support

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS