GSA, FSS intends to establish a "not to exceed" one year Standing Price Quote (SPQ) for the National Stock Number 5120 00 618 4915. (Please note - this SPQ may last for 30 days or up to one-year). This NSN is part of GSA's Stock Program, and will be included in an upcoming formal solicitation to be issued within the next few months. All offers for this SPQ are to be FOB destination. In addition to the normal clauses that apply to GSA stock tool orders, the following clauses apply; 552.225-70 Notice of Procurement Restriction - Hand or Measuring Tools or Stainless Steel Flatware, D-FSS-475 Bar Coding and 552.246-70 Source Inspection applies, D-FSS-468 Non-Manufactured Wood Package Material to European Union (Nov 2001). Award will be based on price and deliver (DARO). The quantity stated below is an estimate based on the last two years usage. For questions please contact Celeste Gorman at
+1 (555) 000-0000, or you may fax questions to
+1 (555) 000-0000.Please fax your offers to Celeste Gorman at
+1 (555) 000-0000 before October 25, 20025120-00-618-4915 UI: EA $___________SCREWDRIVER, FLAT TIP Estimated one-year quantity 1,000 Procurement History - Kipper Tool Co. $13.13 DESCRIPTION The handle shall be made of a clear amber or yellow plastic, suitably shaped to fit the hand comfortably and provide a non-slip grip. Dimensions shall be the same as for comparable size screwdrivers with steel blades. The screwdriver blade shall be made of beryllium copper or aluminum bronze alloy having an iron content not over five percent, and when present, it shall be well diffused throughout the alloy. The screwdriver tip shall be of either the straight or flared tip design for driving slotted head screws. The opposite end shall be designed to be securely mounted in the handle. The blade cross section shall have a diameter or width across the flats approximately equal to the screwdriver tip width. Tolerances shall be plus 1/32 inch, minus 1/64 inch for tip widths, plus .007 or minus .002 inch for tip thickness, and plus or minus 1/4 inch for blade length. The included angle between bearing surfaces shall be 10 degrees maximum. Blade length: 6 inches Tip width: 1/8 inch End Thickness: 1/64 inch Torsion (In.- lbs) 4 Klein Tools Part Number Gov VB26; Kaufman Co Inc Part Number 6184915; Ampco Part Number S-54 or equal. Offering on:Manufacturer's Name: ____________________Brand_________________Model or Part No. _____________________ EXCEPTION(S) TO TECHNICAL DOCUMENT Each item (including all items within a set or kit) shall be marked with the manufacturer's name or identifying symbol, and the state or country of manufacture, unless otherwise specified. In addition, the name, abbreviation, or chemical symbol for each alloy used shall be marked on each item. All marking shall be engraved, etched, molded, or stamped (indented) directly on the item's surface in such a manner that it remains clearly legible throughout the life of the item. WORKMANSHIP Details of workmanship shall be in accordance with the best commercial standards and practices. Paints, coatings, plating, and finishes shall be smooth, dry, adherent, continuous, and not stained or discolored. Fasteners shall be firmly secured and show no evidence of deformation, cross threading, or hazardous burrs. Adhesives and lubricants adequate for their intended purpose shall be properly and neatly applied. Adhesives shall be adequately cured. Wires and cables shall be neatly dressed and shall not be frayed or in contact with sharp edges. Wire and cable insulation shall show no evidence of burns, abrading, or pinch marks. There shall be no interference, binding, or galling of parts. External and bearing surfaces shall be free of tool and gouge marks, nicks, or other surface imperfections. The item shall be clean and free of corrosion and debris (e.g., chips, shavings, slivers) or other foreign material. The item shall be free from manufacturing workmanship defects (e.g., loose, missing, binding or misaligned parts, sharp or rough external edges, corners or surfaces) and material workmanship defects (e.g., pits, rips, fins, burrs, tears, nodules, cracks, blisters) which may adversely impact the item's serviceability, durability, safety, or appearance. ITEM MARKING Each item (including all items within a set or kit) shall be marked with the manufacturer's name and identifying symbol, and the state or country of manufacture, unless otherwise specified. All marking shall be engraved, etched, molded, or indented. PACKAGING Ten (10) items shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage. PACKING The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 or ECT 32. MARKING All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with FED-STD-123G, dated June 6, 1997, or marked and bar coded for delivery to military activities in accordance with MIL-STD-129N, dated 15 May 1997, as applicable. PALLETIZATION Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free. Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight. Pallet Load Configuration: The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Palletized loads shall be secured to the pallet to insure that the load arrives intact. Stacking Strength: The pallet plus the load shall be capable of supporting three additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength. Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only. BIDDERS OFFERING OTHER THAN BRAND NAME ITEMS IDENTIFIED HEREIN MUST FURNISH WITH THEIR BIDS ADEQUATE DESCRIPTIVE LITERATURE SO THAT A DETERMINATION CAN BE MADE AS TO EQUALITY OF THE PRODUCTS OFFERED. IN ORDER FOR THE GOVERNMENT TO MAKE AN "OR EQUAL" DETERMINATION OF THE OFFERED PRODUCT(S), THE FURNISHED INFORMATION MUST DELINEATE EACH APPLICABLE CHARACTERISTIC, UNIT OF MEASURE, AND TEST METHOD OF THE OFFERED PRODUCT(S) DIRECTLY CORRELATED TO EACH OF THE REQUIREMENTS DELINEATED IN THE ITEM PURCHASE DESCRIPTION. FAILURE TO FURNISH THIS INFORMATION/LITERATURE WILL RESULT IN THE BID BEING REJECTED AS NON-RESPONSIVE OR MAY BE CONSIDERED AS UNACCEPTABLE FOR AWARD IN A NEGOTIATED PROCUREMENT (SEE GSAR CLAUSE 552.211-70).
