Top

56--Fabrication of UHMW Polyethylene panel assemblies

Active

W912QR41144907Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

The government plans to procure Ultra High Molecular Weight Polyethylene (UHMW) panel assemblies exclusively from Polymer Industries under a sole source contract in accordance with federal acquisition regulations and statutory authority. The panels must be Polyslick XL Crosslinked UHMW or an approved equivalent, with specific technical requirements including a coefficient of thermal expansion no greater than 0.00004 in/in/°F and suitability for UV-exposed environments. These panels will be fabricated in thicknesses of 2 inches and 4 inches, and will be prepared with drilling, countersinking, chamfering, and bolting in accordance with US Army Corps of Engineers design specifications. The final assemblies are to be delivered to Lock & Dam 52 for installation on the Primary Chamber Upper Guide Wall by the Louisville Repair Station. While the contract is designated for sole source procurement, the agency is open to considering capability statements from any responsible sources submitted by the deadline of 11:00 am EST on May 21, 2014. The solicitation identifies the NAICS code 326199, relating to plastics product manufacturing, and is managed by the Department of Defense's W072 Endist Louisville office. This posting is not a solicitation for proposals but rather a notice of the intended acquisition and a call for capability statements to assess potential suppliers.

General Info

Government to procure UHMW Polyslick XL panels from Polymer Industries for Lock & Dam 52.

Agency

Department Of Defense → W072 Endist Louisville

NAICS

326199 - All Other Plastics Product Manufacturing

Place of Performance

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMay 6

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → W072 Endist Louisville

ContactsNo contacts available

OfficeLOUISVILLE, KY, 40202-2230, USA

Organization / AgencyDepartment Of Defense → W072 Endist Louisville

Office AddressLOUISVILLE, KY, 40202-2230, USA

ContactsNo contact information available

Full Description

In accordance with 10 U.S.C 2304(c)(1) as implemented by FAR 6.302-1 and DFARS 206.302-1, the government intends to do a sole source procurement of Ultra High Molecular Weight Polyethylene panel assemblies from Polymer Industries. The panels shall be Polyslick XL Crosslinked Ultra High Molecular Weight Polyethylene or an approved equal with a coefficient of thermal expansion less than or equal to 0.00004 in/in/deg F and be suitable for UV-Exposed applications. The UHMW panel assemblies will consist of 2 in. thick and 4 in. thick panels drilled, counter sunk, chamfered, and bolted together per USACE design and specifications. The panels shall be delivered to Lock & Dam 52 to be later installed on the Primary Chamber Upper Guide Wall by the Louisville Repair Station. All responsible sources may submit capability statement, which shall be considered by the agency to SFC Gentle M. Gladney at contact@example.gov no later than 11:00am Eastern Standard Time 21 May 2014. This is not a request for proposal.